0% found this document useful (0 votes)
714 views1 page

Consol 1119LV Technical Data Sheet

Technical Copy

Uploaded by

mayas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
714 views1 page

Consol 1119LV Technical Data Sheet

Technical Copy

Uploaded by

mayas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CONSOL 1119LV

Permanent Structural Epoxy Adhesive


Product Description
CONSOL 1119LV A two component adhesive system composed of 100% solid Epoxy that contain polyamide Curing agent ensuring a thought and
durable bond resistant to chemicals and corrosion. This unique low Viscosity adhesive is primarily designed for the all-around remedy of structural
concrete defects and flaws Particularly the repair of cracks by pressure injection. Aside from sealing cracks and crevices and filling
voids, it can also be combined with fine aggregates or silica sand to results in an epoxy mortar for high Strength grouting.

ADVANTAGE
A.) VERSATILE- suitable to a wide variety of concrete structure application as to leak repair, concrete binder and grouting application.
B.) ECONOMICAL- damaged concrete membrane, which requires new construction, can be restored to its structural durability.
C.) EXCELLENT ADHESIVE PROPERTY – structural concrete repair system using CONSOL 1119LV can withstand earthquake movements.
D.) EASE OF APPLICATION – CONSOL 1119LV has a low viscosity property with a minimum pot-life, applicable for high pressure and mechanical
equipment.

APPLICATION
PRESSURE INJECTION:
Blow compressed air long the crack line to complete clean, dry, and remove dirt and other Loose contaminating materials. Provide
Temporary seal on crack surface except entry and exit ports. Inject CONSOL 1119LV starting at the lowest
Entry port up to proceeding ports until the voids are completely filled.

EPOXY GROUTING V-CUT SYSTEM:


V-cut all cracks for repair Blow compressed air long the cracks lines to completely clean, dry And remove dirt and other loose contaminating
materials. Apply by brush pure CONSOL 1119LV to serve as primer then apply CONSOL 1119LV mixed with silica sand or patching
Compound on v-cut surface.

EPOXY GROUTING ON CONCRETE HONEYCOMB:


Chip off loose concrete. Remove dust, dirt and other loose contaminating materials. Install Formworks on honeycomb providing for a small
opening for a small opening on the upper portion. Pour CONSOL 1119LV mixed with silica sand. Remove formworks upon curing of
Of epoxy grout.

MIXING AND CLEANING


Mix thoroughly by volume 2 parts of resin to 1 part of hardener for 3 to 4 minutes. Any changes from the recommended proportion on will
affect its quality. Scrape the bottoms sides and corners of the container to ensure complete and full blending.

TECHNICAL DATA
Component Properties Component Component PHYSICAL PROPERTIES
A B Compressive Yield Strength

(Resin) (Hardener) Pure ASTM C109-95/D 695 7,000-14,000 psi


10,000-14,000 psi
Mix Ratio (parts by volume) 2 1 Mortal/Silica Sand ASTM C109-95/D 695 5,000-9,000 psi
Appearance Light Straw Amber Slant Shear Test ASTM 882-99 3,000-5,000 psi
Epoxy binder (after mixing) Time Temperature Resistance to Chemical Resistance to most organic solvent, mild
acids and alkalis
Pot Life 1 – 2 hours 25℃
Set Time: Tack Free 4 hours 25℃
Full cure 24 hours 25℃
*load pressure 72 hours

PACKAGING
Available in one gallon.
SHELF LIFE
Minimum of 12 months under normal condition (80℉)
CLEAN-UP
Pressure injection tools and other equipment maybe cleaned with Epoxy Reducer while the mixture has not yet hardened. Wash off
hands with detergents and warm water.
Caution
Avoid contact with eyes and skin and avoid breathing is vapor. This product may cause severe skin irritation after
prolonged or repeated exposure. Keep containers tightly closed and store in cool dry place.

Nothbank Project 02062020

You might also like