License #

SAP2000 Analysis Report

Model Name: Steel Truss_2.sdb

20 July 2024
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Contents
1. Model geometry.............................................................................................................................................................. 5
1.1. Joint coordinates................................................................................................................................................. 5
1.2. Joint restraints..................................................................................................................................................... 5
1.3. Element connectivity............................................................................................................................................ 6
2. Material properties.......................................................................................................................................................... 7
3. Section properties.......................................................................................................................................................... 8
3.1. Frames................................................................................................................................................................ 8
4. Load patterns................................................................................................................................................................. 9
4.1. Definitions............................................................................................................................................................ 9
5. Load cases..................................................................................................................................................................... 9
5.1. Definitions............................................................................................................................................................ 9
5.2. Static case load assignments............................................................................................................................ 10
5.3. Response spectrum case load assignments..................................................................................................... 10
6. Load combinations....................................................................................................................................................... 10
7. Structure results........................................................................................................................................................... 12
7.1. Mass summary.................................................................................................................................................. 12
7.2. Modal results..................................................................................................................................................... 12
7.3. Base reactions................................................................................................................................................... 13
8. Joint results.................................................................................................................................................................. 13
9. Frame results............................................................................................................................................................... 19
10. Material take-off.......................................................................................................................................................... 45
11. Design preferences..................................................................................................................................................... 45
11.1. Steel design..................................................................................................................................................... 45
11.2. Aluminum design............................................................................................................................................. 45
11.3. Cold formed design.......................................................................................................................................... 46
12. Design overwrites....................................................................................................................................................... 46
12.1. Steel design..................................................................................................................................................... 46
13. Design summary........................................................................................................................................................ 49
13.1. Steel design..................................................................................................................................................... 49

List of Figures
Figure 1: Finite element model........................................................................................................................................... 5
Figure 2: Deformed shape................................................................................................................................................ 12

List of Tables
Table 1: Joint Coordinates.................................................................................................................................................. 5
Table 2: Joint Restraint Assignments.................................................................................................................................. 5
Table 3: Connectivity - Frame............................................................................................................................................. 6
Table 4: Frame Section Assignments................................................................................................................................. 6
Table 5: Frame Release Assignments 1 - General, Part 1 of 2........................................................................................... 6
Table 5: Frame Release Assignments 1 - General, Part 2 of 2........................................................................................... 7
Table 6: Material Properties 02 - Basic Mechanical Properties........................................................................................... 7
Table 7: Material Properties 03a - Steel Data..................................................................................................................... 7
Table 8: Material Properties 03b - Concrete Data............................................................................................................... 8
Table 9: Frame Section Properties 01 - General, Part 1 of 4.............................................................................................. 8
Table 9: Frame Section Properties 01 - General, Part 2 of 4.............................................................................................. 8
Table 9: Frame Section Properties 01 - General, Part 3 of 4.............................................................................................. 8
Table 9: Frame Section Properties 01 - General, Part 4 of 4.............................................................................................. 9

LG Page 3 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Table 10: Load Pattern Definitions...................................................................................................................................... 9

Table 11: Load Case Definitions......................................................................................................................................... 9
Table 12: Case - Static 1 - Load Assignments.................................................................................................................. 10
Table 13: Function - Response Spectrum - User.............................................................................................................. 10
Table 14: Combination Definitions.................................................................................................................................... 11
Table 15: Assembled Joint Masses.................................................................................................................................. 12
Table 16: Modal Participating Mass Ratios....................................................................................................................... 12
Table 17: Base Reactions................................................................................................................................................. 13
Table 18: Joint Displacements.......................................................................................................................................... 13
Table 19: Joint Reactions................................................................................................................................................. 18
Table 20: Element Forces - Frames, Part 1 of 2............................................................................................................... 19
Table 20: Element Forces - Frames, Part 2 of 2............................................................................................................... 32
Table 21: Material List 2 - By Section Property................................................................................................................. 45
Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 1 of 3.............................................................................. 45
Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 2 of 3.............................................................................. 45
Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 3 of 3.............................................................................. 45
Table 23: Preferences - Aluminum Design - AA-ASD 2000.............................................................................................. 46
Table 24: Preferences - Cold Formed Design - AISI-ASD96............................................................................................ 46
Table 26: Steel Design 1 - Summary Data - Eurocode 3-2005, Part 1 of 2....................................................................... 49
Table 26: Steel Design 1 - Summary Data - Eurocode 3-2005, Part 2 of 2....................................................................... 49

LG Page 4 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

1. Model geometry
This section provides model geometry information, including items such as joint coordinates, joint restraints, and element
connectivity.

Y X

Figure 1: Finite element model

1.1. Joint coordinates

Table 1: Joint Coordinates

Table 1: Joint Coordinates
Joint CoordSys CoordType GlobalX GlobalY GlobalZ
m m m
1 GLOBAL Cartesian 0.00000 0.00000 0.00000
2 GLOBAL Cartesian 1.50000 0.00000 0.00000
4 GLOBAL Cartesian 1.50000 0.00000 -0.23500
5 GLOBAL Cartesian 1.50000 0.00000 0.23500
6 GLOBAL Cartesian 0.00000 0.00000 -0.23500
7 GLOBAL Cartesian 0.00000 0.00000 0.23500
37 GLOBAL Cartesian 0.00000 0.00000 -1.14500
43 GLOBAL Cartesian 0.00000 0.00000 -1.00000
45 GLOBAL Cartesian 0.00000 1.60000 0.00000
53 GLOBAL Cartesian 0.00000 0.00000 0.35500
54 GLOBAL Cartesian 0.00000 1.80000 0.00000
56 GLOBAL Cartesian 1.50000 0.00000 -1.14500
58 GLOBAL Cartesian 1.50000 0.00000 -1.00000
59 GLOBAL Cartesian 1.50000 1.60000 0.00000
61 GLOBAL Cartesian 1.50000 0.00000 0.35500
62 GLOBAL Cartesian 1.50000 1.80000 0.00000
64 GLOBAL Cartesian 0.75000 1.80000 0.00000
67 GLOBAL Cartesian 1.50000 0.30000 0.00000
68 GLOBAL Cartesian 0.00000 1.30000 0.00000

1.2. Joint restraints

Table 2: Joint Restraint Assignments

Table 2: Joint Restraint Assignments
Joint U1 U2 U3 R1 R2 R3

4 Yes Yes Yes No No No

LG Page 5 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

5 Yes Yes Yes No No No

6 Yes Yes Yes No No No
7 Yes Yes Yes No No No
43 Yes Yes Yes No No No
58 Yes Yes Yes No No No

1.3. Element connectivity

Table 3: Connectivity - Frame

Table 3: Connectivity - Frame
Frame JointI JointJ Length
m
1 54 1 1.80000
2 62 2 1.80000
59 37 53 1.50000
62 43 45 1.88680
70 56 61 1.50000
71 58 59 1.88680
74 54 62 1.50000
76 67 68 1.80278

Table 4: Frame Section Assignments

Table 4: Frame Section Assignments
Frame AnalSect DesignSect MatProp

1 70x70x8mm 70x70x8mm Default

S.H.S. S.H.S.
2 70x70x8mm 70x70x8mm Default
S.H.S. S.H.S.
59 70x70x8mm 70x70x8mm Default
S.H.S. S.H.S.
62 70x70x8mm 70x70x8mm Default
S.H.S. S.H.S.
70 70x70x8mm 70x70x8mm Default
S.H.S. S.H.S.
71 70x70x8mm 70x70x8mm Default
S.H.S. S.H.S.
74 70x70x8mm 70x70x8mm Default
S.H.S. S.H.S.
76 50x50x4mm EA 50x50x4mm EA Default

Table 5: Frame Release Assignments 1 - General, Part 1 of 2

Table 5: Frame Release Assignments 1 - General, Part 1 of 2
Frame PI V2I V3I TI M2I M3I

1 No No No No Yes Yes
2 No No No No Yes Yes
59 No No No No Yes Yes

LG Page 6 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

62 No No No No Yes Yes
70 No No No No Yes Yes
71 No No No No Yes Yes
74 No No No No Yes Yes
76 No No No No Yes Yes

Table 5: Frame Release Assignments 1 - General, Part 2 of 2

Table 5: Frame Release Assignments 1 - General, Part 2 of 2
Frame PJ V2J V3J TJ M2J M3J

1 No No No No Yes Yes
2 No No No No Yes Yes
59 No No No No Yes Yes
62 No No No No Yes Yes
70 No No No No Yes Yes
71 No No No No Yes Yes
74 No No No No Yes Yes
76 No No No No Yes Yes

2. Material properties
This section provides material property information for materials used in the model.

Table 6: Material Properties 02 - Basic Mechanical Properties

Table 6: Material Properties 02 - Basic Mechanical Properties
Material UnitWeight UnitMass E1 G12 U12 A1
KN/m3 KN-s2/m4 KN/m2 KN/m2 1/C
4000Psi 2.3563E+01 2.4028E+00 24855578. 10356490. 0.200000 9.9000E-06
06 86
A992Fy50 7.6973E+01 7.8490E+00 199947978 76903068. 0.300000 1.1700E-05
.8 77
S275 7.6973E+01 7.8490E+00 210000000 80769230. 0.300000 1.1700E-05
.0 77

Table 7: Material Properties 03a - Steel Data

Table 7: Material Properties 03a - Steel Data
Material Fy Fu FinalSlope
KN/m2 KN/m2
A992Fy50 344737.89 448159.26 -0.100000
S275 275000.00 430000.00 -0.100000

LG Page 7 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Table 8: Material Properties 03b - Concrete Data

Table 8: Material Properties 03b - Concrete
Data
Material Fc FinalSlope
KN/m2
4000Psi 27579.03 -0.100000

3. Section properties
This section provides section property information for objects used in the model.

3.1. Frames

Table 9: Frame Section Properties 01 - General, Part 1 of 4

Table 9: Frame Section Properties 01 - General, Part 1 of 4
SectionName Material Shape t3 t2 tf tw t2b tfb
m m m m m m
50x50x4mm EA S275 Angle 0.050000 0.050000 0.004000 0.004000
70x70x8mm S275 Box/Tube 0.070000 0.070000 0.008000 0.008000
S.H.S.
FSEC1 A992Fy50 I/Wide Flange 0.304800 0.127000 0.009652 0.006350 0.127000 0.009652
SHHF50X50X5 S275 Box/Tube 0.050000 0.050000 0.005000 0.005000

Table 9: Frame Section Properties 01 - General, Part 2 of 4

Table 9: Frame Section Properties 01 - General, Part 2 of 4
SectionName I23 Area TorsConst I33 I22 AS2 AS3
m4 m2 m4 m4 m4 m2 m2
50x50x4mm EA 5.510E-08 0.000384 1.985E-09 9.261E-08 9.261E-08 0.000200 0.000200
70x70x8mm 0.000000 0.001984 1.907E-06 1.292E-06 1.292E-06 0.001120 0.001120
S.H.S.
FSEC1 0.000000 0.004265 9.651E-08 0.000066 3.301E-06 0.001935 0.002043
SHHF50X50X5 0.000000 0.000873 4.760E-07 2.890E-07 2.890E-07 0.000500 0.000500

Table 9: Frame Section Properties 01 - General, Part 3 of 4

Table 9: Frame Section Properties 01 - General, Part 3 of 4
SectionName S33 S22 Z33 Z22 R33 R22
m3 m3 m3 m3 m m
50x50x4mm EA 2.571E-06 2.571E-06 4.631E-06 4.631E-06 0.015530 0.015530
70x70x8mm 0.000037 0.000037 0.000046 0.000046 0.025521 0.025521
S.H.S.
FSEC1 0.000431 0.000052 0.000491 0.000081 0.124145 0.027823
SHHF50X50X5 0.000012 0.000012 0.000015 0.000015 0.018195 0.018195

LG Page 8 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Table 9: Frame Section Properties 01 - General, Part 4 of 4

Table 9: Frame Section Properties 01 - General, Part 4 of 4
SectionName AMod A2Mod A3Mod JMod I2Mod I3Mod MMod WMod

50x50x4mm EA 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000

70x70x8mm 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000
S.H.S.
FSEC1 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000
SHHF50X50X5 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000

4. Load patterns
This section provides loading information as applied to the model.

4.1. Definitions

Table 10: Load Pattern Definitions

Table 10: Load Pattern Definitions
LoadPat DesignType SelfWtMult AutoLoad

DEAD DEAD 1.000000

IMPSOED LIVE 0.000000
WINDX (In WIND 0.000000 None
service)
WINDY (In WIND 0.000000 None
service)
WINDZ (In WIND 0.000000 None
service)
WINDX (Out of WIND 0.000000 None
service)
WINDY (Out of WIND 0.000000 None
service)
WINDZ (Out of WIND 0.000000 None
service)

5. Load cases
This section provides load case information.

5.1. Definitions

Table 11: Load Case Definitions

Table 11: Load Case Definitions
Case Type InitialCond ModalCase BaseCase DesActOpt DesignAct

DEAD LinStatic Zero Prog Det Non-

Composite
MODAL LinModal Zero Prog Det Other

LG Page 9 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

IMPSOED LinStatic Zero Prog Det Short-Term

Composite
WINDX (In LinStatic Zero Prog Det Short-Term
service) Composite
WINDY (In LinStatic Zero Prog Det Short-Term
service) Composite
WINDZ (In LinStatic Zero Prog Det Short-Term
service) Composite
WINDX (Out of LinStatic Zero Prog Det Short-Term
service) Composite
WINDY (Out of LinStatic Zero Prog Det Short-Term
service) Composite
WINDZ (Out of LinStatic Zero Prog Det Short-Term
service) Composite

5.2. Static case load assignments

Table 12: Case - Static 1 - Load Assignments

Table 12: Case - Static 1 - Load Assignments
Case LoadType LoadName LoadSF

DEAD Load pattern DEAD 1.000000

IMPSOED Load pattern IMPSOED 1.000000
WINDX (In Load pattern WINDX (In 1.000000
service) service)
WINDY (In Load pattern WINDY (In 1.000000
service) service)
WINDZ (In Load pattern WINDZ (In 1.000000
service) service)
WINDX (Out of Load pattern WINDX (Out of 1.000000
service) service)
WINDY (Out of Load pattern WINDY (Out of 1.000000
service) service)
WINDZ (Out of Load pattern WINDZ (Out of 1.000000
service) service)

5.3. Response spectrum case load assignments

Table 13: Function - Response Spectrum - User

Table 13: Function - Response Spectrum - User
Name Period Accel FuncDamp
Sec
UNIFRS 0.000000 1.000000 0.050000
UNIFRS 1.000000 1.000000

6. Load combinations
This section provides load combination information.

LG Page 10 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Table 14: Combination Definitions

Table 14: Combination Definitions
ComboName ComboType CaseName ScaleFactor

2.0(DL+LL+WL) Linear Add DEAD 2.000000

2.0(DL+LL+WL) IMPSOED 2.000000
2.0(DL+LL+WL) WINDX (In 2.000000
service)
2.0(DL+LL+WL) WINDY (In 2.000000
service)
2.0(DL+LL+WL) WINDZ (In 2.000000
service)
1.4DL+1.4WL Linear Add DEAD 1.400000
1.4DL+1.4WL WINDX (Out of 1.400000
service)
1.4DL+1.4WL WINDY (Out of 1.400000
service)
1.4DL+1.4WL WINDZ (Out of 1.400000
service)
1.0(DL+LL+WL) Linear Add DEAD 1.000000
1.0(DL+LL+WL) IMPSOED 1.000000
1.0(DL+LL+WL) WINDX (In 1.000000
service)
1.0(DL+LL+WL) WINDY (In 1.000000
service)
1.0(DL+LL+WL) WINDZ (In 1.000000
service)
1.0(DL+WL) Linear Add DEAD 1.000000
1.0(DL+WL) WINDX (Out of 1.000000
service)
1.0(DL+WL) WINDY (Out of 1.000000
service)
1.0(DL+WL) WINDZ (Out of 1.000000
service)
ULS Envelope 2.0(DL+LL+WL) 1.000000
ULS 1.4DL+1.4WL 1.000000
SLS Envelope 1.0(DL+LL+WL) 1.000000
SLS 1.0(DL+WL) 1.000000

LG Page 11 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

7. Structure results
This section provides structure results, including items such as structural periods and base reactions.

Y X

Figure 2: Deformed shape

7.1. Mass summary

Table 15: Assembled Joint Masses

Table 15: Assembled Joint Masses
Joint MassSource U1 U2 U3 R1 R2 R3
KN-s2/m KN-s2/m KN-s2/m KN-m-s2 KN-m-s2 KN-m-s2
1 MSSSRC1 1.378E-02 1.378E-02 1.378E-02 0.0000 0.0000 0.0000
2 MSSSRC1 5.995E-03 5.995E-03 5.995E-03 0.0000 0.0000 0.0000
4 MSSSRC1 7.786E-03 7.786E-03 7.786E-03 0.0000 0.0000 0.0000
5 MSSSRC1 2.764E-03 2.764E-03 2.764E-03 0.0000 0.0000 0.0000
6 MSSSRC1 7.786E-03 7.786E-03 7.786E-03 0.0000 0.0000 0.0000
7 MSSSRC1 2.764E-03 2.764E-03 2.764E-03 0.0000 0.0000 0.0000
37 MSSSRC1 1.129E-03 1.129E-03 1.129E-03 0.0000 0.0000 0.0000
43 MSSSRC1 2.178E-02 2.178E-02 2.178E-02 0.0000 0.0000 0.0000
45 MSSSRC1 1.858E-02 1.858E-02 1.858E-02 0.0000 0.0000 0.0000
53 MSSSRC1 9.344E-04 9.344E-04 9.344E-04 0.0000 0.0000 0.0000
54 MSSSRC1 7.397E-03 7.397E-03 7.397E-03 0.0000 0.0000 0.0000
56 MSSSRC1 1.129E-03 1.129E-03 1.129E-03 0.0000 0.0000 0.0000
58 MSSSRC1 2.178E-02 2.178E-02 2.178E-02 0.0000 0.0000 0.0000
59 MSSSRC1 2.637E-02 2.637E-02 2.637E-02 0.0000 0.0000 0.0000
61 MSSSRC1 9.344E-04 9.344E-04 9.344E-04 0.0000 0.0000 0.0000
62 MSSSRC1 7.397E-03 7.397E-03 7.397E-03 0.0000 0.0000 0.0000
64 MSSSRC1 1.168E-02 1.168E-02 1.168E-02 0.0000 0.0000 0.0000
67 MSSSRC1 1.517E-02 1.517E-02 1.517E-02 0.0000 0.0000 0.0000
68 MSSSRC1 1.517E-02 1.517E-02 1.517E-02 0.0000 0.0000 0.0000

7.2. Modal results

Table 16: Modal Participating Mass Ratios

Table 16: Modal Participating Mass Ratios
OutputCase StepNum Period UX UY UZ SumUX SumUY SumUZ
Sec
MODAL 1.000000 0.063696 0.72407 8.940E-07 3.093E-06 0.72407 8.940E-07 3.093E-06
MODAL 2.000000 0.013484 6.417E-12 0.02698 0.18683 0.72407 0.02698 0.18684

LG Page 12 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

MODAL 3.000000 0.011246 1.947E-05 0.14292 0.02049 0.72409 0.16990 0.20732

MODAL 4.000000 0.010281 0.05974 0.00016 0.03482 0.78383 0.17006 0.24214
MODAL 5.000000 0.010087 0.02016 0.00256 0.14049 0.80399 0.17261 0.38263
MODAL 6.000000 0.009103 0.00116 0.00050 0.00264 0.80515 0.17312 0.38527
MODAL 7.000000 0.008724 0.00025 0.01667 0.25896 0.80540 0.18979 0.64423
MODAL 8.000000 0.007348 5.168E-06 0.07446 0.05338 0.80540 0.26426 0.69761
MODAL 9.000000 0.005671 0.00641 0.00018 4.170E-05 0.81181 0.26444 0.69765
MODAL 10.000000 0.003601 0.00062 0.05306 0.01077 0.81244 0.31750 0.70842
MODAL 11.000000 0.003180 0.00200 0.05234 0.01096 0.81444 0.36984 0.71938
MODAL 12.000000 0.002617 0.00023 0.38457 0.05508 0.81467 0.75441 0.77446

7.3. Base reactions

Table 17: Base Reactions

Table 17: Base Reactions
OutputCase GlobalFX GlobalFY GlobalFZ GlobalMX GlobalMY GlobalMZ
KN KN KN KN-m KN-m KN-m
DEAD -8.934E-17 -4.219E-15 1.867 1.4108 -1.3999 -4.663E-15
IMPSOED -6.450E-16 -2.753E-14 6.150 11.0700 -4.6125 -3.730E-14
WINDX (In -1.150 9.992E-16 4.313E-16 9.370E-16 -3.265E-17 2.0700
service)
WINDY (In -6.583E-17 -1.150 1.112E-16 4.857E-17 1.887E-16 -0.8625
service)
WINDZ (In -1.249E-16 -4.663E-15 1.150 2.0700 -0.8625 -6.883E-15
service)
WINDX (Out of -4.103 3.331E-15 1.327E-15 1.332E-15 0.9215 3.1203
service)
WINDY (Out of -1.527E-16 -4.103 6.696E-16 -0.9215 -1.388E-16 -3.0772
service)
WINDZ (Out of -2.706E-16 -7.105E-15 4.103 3.1203 -3.0772 -8.882E-15
service)

8. Joint results
This section provides joint results, including items such as displacements and reactions.

Table 18: Joint Displacements

Table 18: Joint Displacements
Joint OutputCase U1 U2 U3 R1 R2 R3
m m m Radians Radians Radians
1 DEAD 3.761E-09 5.454E-06 -4.168E-08 -1.141E-06 3.930E-07 0.000031
1 IMPSOED -7.400E-11 0.000042 1.084E-07 -8.809E-06 -7.734E-09 -9.495E-06
1 WINDX (In -4.373E-06 0.000010 -2.587E-13 -2.196E-06 -9.153E-07 -0.002325
service)
1 WINDY (In 4.742E-19 4.373E-06 7.880E-20 -9.152E-07 4.957E-17 -9.201E-07
service)
1 WINDZ (In -1.384E-11 7.871E-06 2.027E-08 -1.647E-06 -1.446E-09 -1.776E-06
service)
1 WINDX (Out of -3.774E-06 0.000016 -2.624E-09 -3.287E-06 3.557E-06 -0.002594
service)

LG Page 13 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

1 WINDY (Out of 5.326E-08 9.775E-06 -3.935E-09 -2.690E-06 5.566E-06 0.000459

service)
1 WINDZ (Out of 3.811E-08 0.000013 -9.569E-08 -2.673E-06 3.983E-06 0.000325
service)
2 DEAD -3.761E-09 5.275E-06 -4.583E-08 -1.104E-06 -3.930E-07 -9.216E-06
2 IMPSOED 7.400E-11 0.000042 1.084E-07 -8.809E-06 7.734E-09 -8.699E-06
2 WINDX (In 0.000013 -0.000010 2.587E-13 2.196E-06 2.746E-06 -0.000301
service)
2 WINDY (In -4.737E-19 4.373E-06 -7.880E-20 -9.152E-07 -4.957E-17 -9.201E-07
service)
2 WINDZ (In 1.384E-11 7.871E-06 2.027E-08 -1.647E-06 1.446E-09 -1.627E-06
service)
2 WINDX (Out of 0.000024 -0.000016 2.624E-09 3.287E-06 1.894E-06 -8.726E-06
service)
2 WINDY (Out of -5.326E-08 0.000010 3.935E-09 -2.761E-06 -5.566E-06 -0.000114
service)
2 WINDZ (Out of -3.811E-08 0.000011 -1.377E-07 -2.293E-06 -3.983E-06 -0.000084
service)
4 DEAD 0.000000 0.000000 0.000000 -0.000022 7.053E-08 -9.216E-06
4 IMPSOED 0.000000 0.000000 0.000000 -0.000173 -1.388E-09 -8.699E-06
4 WINDX (In 0.000000 0.000000 0.000000 0.000043 0.000054 -0.000301
service)
4 WINDY (In 0.000000 0.000000 0.000000 -0.000018 8.899E-18 -9.201E-07
service)
4 WINDZ (In 0.000000 0.000000 0.000000 -0.000032 -2.595E-10 -1.627E-06
service)
4 WINDX (Out of 0.000000 0.000000 0.000000 0.000064 0.000093 -8.726E-06
service)
4 WINDY (Out of 0.000000 0.000000 0.000000 -0.000037 9.988E-07 -0.000114
service)
4 WINDZ (Out of 0.000000 0.000000 0.000000 -0.000045 7.147E-07 -0.000084
service)
5 DEAD 0.000000 0.000000 0.000000 0.000029 1.345E-07 -9.216E-06
5 IMPSOED 0.000000 0.000000 0.000000 0.000234 -2.647E-09 -8.699E-06
5 WINDX (In 0.000000 0.000000 0.000000 -0.000058 -0.000073 -0.000301
service)
5 WINDY (In 0.000000 0.000000 0.000000 0.000024 1.697E-17 -9.201E-07
service)
5 WINDZ (In 0.000000 0.000000 0.000000 0.000044 -4.951E-10 -1.627E-06
service)
5 WINDX (Out of 0.000000 0.000000 0.000000 -0.000087 -0.000130 -8.726E-06
service)
5 WINDY (Out of 0.000000 0.000000 0.000000 0.000056 1.905E-06 -0.000114
service)
5 WINDZ (Out of 0.000000 0.000000 0.000000 0.000061 1.363E-06 -0.000084
service)
6 DEAD 0.000000 0.000000 0.000000 -0.000022 -7.053E-08 0.000031
6 IMPSOED 0.000000 0.000000 0.000000 -0.000173 1.388E-09 -9.495E-06
6 WINDX (In 0.000000 0.000000 0.000000 -0.000043 -0.000018 -0.002325
service)
6 WINDY (In 0.000000 0.000000 0.000000 -0.000018 -8.897E-18 -9.201E-07
service)
6 WINDZ (In 0.000000 0.000000 0.000000 -0.000032 2.595E-10 -1.776E-06
service)
6 WINDX (Out of 0.000000 0.000000 0.000000 -0.000064 -0.000021 -0.002594
service)
6 WINDY (Out of 0.000000 0.000000 0.000000 -0.000036 -9.988E-07 0.000459
service)
6 WINDZ (Out of 0.000000 0.000000 0.000000 -0.000052 -7.147E-07 0.000325
service)
7 DEAD 0.000000 0.000000 0.000000 0.000030 -1.345E-07 0.000031
7 IMPSOED 0.000000 0.000000 0.000000 0.000234 2.647E-09 -9.495E-06

LG Page 14 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

7 WINDX (In 0.000000 0.000000 0.000000 0.000058 0.000024 -0.002325

service)
7 WINDY (In 0.000000 0.000000 0.000000 0.000024 -1.697E-17 -9.201E-07
service)
7 WINDZ (In 0.000000 0.000000 0.000000 0.000044 4.951E-10 -1.776E-06
service)
7 WINDX (Out of 0.000000 0.000000 0.000000 0.000087 0.000020 -0.002594
service)
7 WINDY (Out of 0.000000 0.000000 0.000000 0.000054 -1.905E-06 0.000459
service)
7 WINDZ (Out of 0.000000 0.000000 0.000000 0.000071 -1.363E-06 0.000325
service)
37 DEAD -4.881E-09 1.549E-06 -3.853E-09 0.000000 0.000000 0.000031
37 IMPSOED 9.605E-11 0.000012 0.000000 0.000000 0.000000 -9.495E-06
37 WINDX (In -1.242E-06 2.981E-06 0.000000 0.000000 0.000000 -0.002325
service)
37 WINDY (In -6.157E-19 1.242E-06 0.000000 0.000000 0.000000 -9.201E-07
service)
37 WINDZ (In 1.796E-11 2.236E-06 0.000000 0.000000 0.000000 -1.776E-06
service)
37 WINDX (Out of -2.570E-06 4.462E-06 0.000000 0.000000 0.000000 -0.002594
service)
37 WINDY (Out of -6.912E-08 1.336E-06 0.000000 0.000000 0.000000 0.000459
service)
37 WINDZ (Out of -4.946E-08 3.628E-06 -7.569E-09 0.000000 0.000000 0.000325
service)
43 DEAD 0.000000 0.000000 0.000000 0.000011 3.366E-08 0.000031
43 IMPSOED 0.000000 0.000000 0.000000 0.000082 -6.624E-10 -9.495E-06
43 WINDX (In 0.000000 0.000000 0.000000 0.000021 8.567E-06 -0.002325
service)
43 WINDY (In 0.000000 0.000000 0.000000 8.567E-06 4.246E-18 -9.201E-07
service)
43 WINDZ (In 0.000000 0.000000 0.000000 0.000015 -1.239E-10 -1.776E-06
service)
43 WINDX (Out of 0.000000 0.000000 0.000000 0.000031 0.000018 -0.002594
service)
43 WINDY (Out of 0.000000 0.000000 0.000000 8.550E-06 4.767E-07 0.000459
service)
43 WINDZ (Out of 0.000000 0.000000 0.000000 0.000025 3.411E-07 0.000325
service)
45 DEAD 2.039E-06 8.208E-06 -0.000020 0.000045 0.000020 -1.272E-06
45 IMPSOED 0.000014 0.000063 -0.000157 -0.001311 -4.003E-07 -8.856E-06
45 WINDX (In 0.001309 0.000015 -0.000024 -0.000015 -9.236E-07 -0.002309
service)
45 WINDY (In 1.472E-06 6.581E-06 -0.000011 -6.581E-06 2.566E-15 -9.201E-07
service)
45 WINDZ (In 2.650E-06 0.000012 -0.000029 -0.000245 -7.484E-08 -1.656E-06
service)
45 WINDX (Out of 0.001925 0.000022 -0.000035 -7.600E-06 0.000192 -0.002872
service)
45 WINDY (Out of 2.219E-06 0.000014 -0.000022 8.171E-06 0.000288 -1.353E-06
service)
45 WINDZ (Out of 6.354E-06 0.000019 -0.000048 0.000191 0.000206 -3.948E-06
service)
53 DEAD -1.614E-08 -3.632E-06 -2.639E-09 0.000000 0.000000 0.000031
53 IMPSOED 3.177E-10 -0.000028 0.000000 0.000000 0.000000 -9.495E-06
53 WINDX (In 2.912E-06 -6.988E-06 0.000000 0.000000 0.000000 -0.002325
service)
53 WINDY (In -2.036E-18 -2.912E-06 0.000000 0.000000 0.000000 -9.201E-07
service)
53 WINDZ (In 5.941E-11 -5.241E-06 0.000000 0.000000 0.000000 -1.776E-06
service)

LG Page 15 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

53 WINDX (Out of 2.443E-06 -0.000010 0.000000 0.000000 0.000000 -0.002594

service)
53 WINDY (Out of -2.286E-07 -6.451E-06 0.000000 0.000000 0.000000 0.000459
service)
53 WINDZ (Out of -1.636E-07 -8.505E-06 -5.184E-09 0.000000 0.000000 0.000325
service)
54 DEAD 2.293E-06 8.208E-06 -0.000013 0.000000 0.000020 0.000000
54 IMPSOED 0.000016 0.000063 -0.000456 0.000000 -4.003E-07 0.000000
54 WINDX (In 0.001789 0.000015 -0.000027 0.000000 -9.236E-07 0.000000
service)
54 WINDY (In 1.656E-06 6.857E-06 -0.000012 0.000000 2.566E-15 0.000000
service)
54 WINDZ (In 2.981E-06 0.000012 -0.000085 0.000000 -7.484E-08 0.000000
service)
54 WINDX (Out of 0.002518 0.000022 -0.000037 0.000000 0.000192 0.000000
service)
54 WINDY (Out of 2.489E-06 0.000014 -0.000020 0.000000 0.000288 0.000000
service)
54 WINDZ (Out of 7.144E-06 0.000019 -0.000012 0.000000 0.000206 0.000000
service)
56 DEAD 4.881E-09 1.499E-06 -3.853E-09 0.000000 0.000000 -9.216E-06
56 IMPSOED -9.605E-11 0.000012 0.000000 0.000000 0.000000 -8.699E-06
56 WINDX (In 3.727E-06 -2.981E-06 0.000000 0.000000 0.000000 -0.000301
service)
56 WINDY (In 6.159E-19 1.242E-06 0.000000 0.000000 0.000000 -9.201E-07
service)
56 WINDZ (In -1.796E-11 2.236E-06 0.000000 0.000000 0.000000 -1.627E-06
service)
56 WINDX (Out of 5.337E-06 -4.462E-06 0.000000 0.000000 0.000000 -8.726E-06
service)
56 WINDY (Out of 6.912E-08 1.432E-06 0.000000 0.000000 0.000000 -0.000114
service)
56 WINDZ (Out of 4.946E-08 3.113E-06 -7.569E-09 0.000000 0.000000 -0.000084
service)
58 DEAD 0.000000 0.000000 0.000000 0.000010 -3.366E-08 -9.216E-06
58 IMPSOED 0.000000 0.000000 0.000000 0.000082 6.624E-10 -8.699E-06
58 WINDX (In 0.000000 0.000000 0.000000 -0.000021 -0.000026 -0.000301
service)
58 WINDY (In 0.000000 0.000000 0.000000 8.567E-06 -4.248E-18 -9.201E-07
service)
58 WINDZ (In 0.000000 0.000000 0.000000 0.000015 1.239E-10 -1.627E-06
service)
58 WINDX (Out of 0.000000 0.000000 0.000000 -0.000031 -0.000036 -8.726E-06
service)
58 WINDY (Out of 0.000000 0.000000 0.000000 9.215E-06 -4.767E-07 -0.000114
service)
58 WINDZ (Out of 0.000000 0.000000 0.000000 0.000021 -3.411E-07 -0.000084
service)
59 DEAD 2.038E-06 7.939E-06 -0.000020 0.000042 -4.996E-06 -1.276E-06
59 IMPSOED 0.000014 0.000063 -0.000157 -0.001311 9.832E-08 -8.856E-06
59 WINDX (In 0.001727 -0.000011 0.000018 0.000011 2.748E-06 -0.000346
service)
59 WINDY (In 1.472E-06 6.581E-06 -0.000011 -6.581E-06 -6.302E-16 -9.201E-07
service)
59 WINDZ (In 2.650E-06 0.000012 -0.000029 -0.000245 1.838E-08 -1.656E-06
service)
59 WINDX (Out of 0.002536 -0.000017 0.000027 0.000030 -0.000042 -6.393E-08
service)
59 WINDY (Out of 2.207E-06 0.000013 -0.000022 5.829E-06 -0.000071 -1.412E-06
service)
59 WINDZ (Out of 6.346E-06 0.000016 -0.000041 0.000153 -0.000051 -3.990E-06
service)

LG Page 16 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

61 DEAD 1.614E-08 -3.513E-06 -2.639E-09 0.000000 0.000000 -9.216E-06

61 IMPSOED -3.177E-10 -0.000028 0.000000 0.000000 0.000000 -8.699E-06
61 WINDX (In -8.736E-06 6.988E-06 0.000000 0.000000 0.000000 -0.000301
service)
61 WINDY (In 2.036E-18 -2.912E-06 0.000000 0.000000 0.000000 -9.201E-07
service)
61 WINDZ (In -5.941E-11 -5.241E-06 0.000000 0.000000 0.000000 -1.627E-06
service)
61 WINDX (Out of -0.000016 0.000010 0.000000 0.000000 0.000000 -8.726E-06
service)
61 WINDY (Out of 2.286E-07 -6.677E-06 0.000000 0.000000 0.000000 -0.000114
service)
61 WINDZ (Out of 1.636E-07 -7.297E-06 -5.184E-09 0.000000 0.000000 -0.000084
service)
62 DEAD 2.293E-06 7.939E-06 -0.000013 0.000000 -4.996E-06 0.000000
62 IMPSOED 0.000016 0.000063 -0.000456 0.000000 9.832E-08 0.000000
62 WINDX (In 0.001792 -0.000011 0.000021 0.000000 2.748E-06 0.000000
service)
62 WINDY (In 1.656E-06 6.857E-06 -0.000012 0.000000 -6.302E-16 0.000000
service)
62 WINDZ (In 2.981E-06 0.000012 -0.000085 0.000000 1.838E-08 0.000000
service)
62 WINDX (Out of 0.002523 -0.000017 0.000033 0.000000 -0.000042 0.000000
service)
62 WINDY (Out of 2.489E-06 0.000014 -0.000021 0.000000 -0.000071 0.000000
service)
62 WINDZ (Out of 7.144E-06 0.000016 -0.000013 0.000000 -0.000051 0.000000
service)
64 DEAD 2.293E-06 8.073E-06 -0.000050 0.000000 5.130E-08 -1.794E-07
64 IMPSOED 0.000016 0.000063 -0.002075 0.000000 1.877E-09 1.111E-09
64 WINDX (In 0.001792 1.656E-06 -2.981E-06 0.000000 -0.000032 -0.000018
service)
64 WINDY (In 1.656E-06 0.000310 -0.000012 0.000000 8.716E-12 -4.335E-10
service)
64 WINDZ (In 2.981E-06 0.000012 -0.000388 0.000000 3.509E-10 2.077E-10
service)
64 WINDX (Out of 0.002521 2.496E-06 -1.751E-06 0.000000 -0.000047 -0.000026
service)
64 WINDY (Out of 2.489E-06 0.000087 -0.000020 0.000000 4.650E-07 -9.214E-08
service)
64 WINDZ (Out of 7.144E-06 0.000018 -0.000087 0.000000 5.242E-07 -1.820E-06
service)
67 DEAD 3.790E-07 5.774E-06 -0.000027 -0.000078 -4.996E-06 -1.276E-06
67 IMPSOED 2.657E-06 0.000046 0.000146 0.000438 9.832E-08 -8.856E-06
67 WINDX (In 0.000601 -0.000011 3.446E-06 0.000011 2.748E-06 -0.001751
service)
67 WINDY (In 2.760E-07 4.787E-06 -1.974E-06 -6.581E-06 -6.302E-16 -9.201E-07
service)
67 WINDZ (In 4.968E-07 8.616E-06 0.000027 0.000082 1.838E-08 -1.656E-06
service)
67 WINDX (Out of 0.001013 -0.000017 6.613E-07 1.064E-06 -0.000042 -0.002923
service)
67 WINDY (Out of 3.705E-07 0.000011 -0.000011 -0.000038 -0.000071 -1.412E-06
service)
67 WINDZ (Out of 1.159E-06 0.000012 -0.000084 -0.000233 -0.000051 -3.990E-06
service)
68 DEAD 1.657E-06 7.691E-06 -0.000036 0.000050 0.000020 -1.272E-06
68 IMPSOED 0.000012 0.000059 0.000139 -0.000695 -4.003E-07 -8.856E-06
68 WINDX (In 0.000686 0.000015 -0.000019 -0.000015 -9.236E-07 -0.001731
service)
68 WINDY (In 1.196E-06 6.167E-06 -8.555E-06 -6.581E-06 2.566E-15 -9.201E-07
service)

LG Page 17 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

68 WINDZ (In 2.153E-06 0.000011 0.000026 -0.000130 -7.484E-08 -1.656E-06

service)
68 WINDX (Out of 0.001140 0.000022 -0.000033 -6.057E-06 0.000192 -0.002209
service)
68 WINDY (Out of 1.813E-06 0.000013 -0.000024 0.000010 0.000288 -1.353E-06
service)
68 WINDZ (Out of 5.170E-06 0.000018 -0.000107 0.000173 0.000206 -3.948E-06
service)

Table 19: Joint Reactions

Table 19: Joint Reactions
Joint OutputCase F1 F2 F3 M1 M2 M3
KN KN KN KN-m KN-m KN-m
4 DEAD -5.281E-03 -0.425 0.158 0.0000 0.0000 0.0000
4 IMPSOED 1.039E-04 -3.390 -0.192 0.0000 0.0000 0.0000
4 WINDX (In -1.056 0.845 -4.587E-07 0.0000 0.0000 0.0000
service)
4 WINDY (In -6.662E-13 -0.352 1.397E-13 0.0000 0.0000 0.0000
service)
4 WINDZ (In 1.943E-05 -0.634 -0.036 0.0000 0.0000 0.0000
service)
4 WINDX (Out of -2.193 1.265 -4.652E-03 0.0000 0.0000 0.0000
service)
4 WINDY (Out of -0.075 -1.049 -6.977E-03 0.0000 0.0000 0.0000
service)
4 WINDZ (Out of -0.054 -0.882 0.394 0.0000 0.0000 0.0000
service)
5 DEAD 5.185E-03 -0.299 0.118 0.0000 0.0000 0.0000
5 IMPSOED -1.020E-04 -2.382 -0.192 0.0000 0.0000 0.0000
5 WINDX (In -0.742 0.594 -4.587E-07 0.0000 0.0000 0.0000
service)
5 WINDY (In 6.540E-13 -0.247 1.397E-13 0.0000 0.0000 0.0000
service)
5 WINDZ (In -1.908E-05 -0.445 -0.036 0.0000 0.0000 0.0000
service)
5 WINDX (Out of -1.376 0.889 -4.652E-03 0.0000 0.0000 0.0000
service)
5 WINDY (Out of 0.073 -0.656 -6.977E-03 0.0000 0.0000 0.0000
service)
5 WINDZ (Out of 0.053 -0.620 0.315 0.0000 0.0000 0.0000
service)
6 DEAD 5.281E-03 -0.439 0.150 0.0000 0.0000 0.0000
6 IMPSOED -1.039E-04 -3.389 -0.192 0.0000 0.0000 0.0000
6 WINDX (In 0.352 -0.845 4.587E-07 0.0000 0.0000 0.0000
service)
6 WINDY (In 6.662E-13 -0.352 -1.397E-13 0.0000 0.0000 0.0000
service)
6 WINDZ (In -1.943E-05 -0.634 -0.036 0.0000 0.0000 0.0000
service)
6 WINDX (Out of 0.122 -1.265 4.652E-03 0.0000 0.0000 0.0000
service)
6 WINDY (Out of 0.075 -1.022 6.977E-03 0.0000 0.0000 0.0000
service)
6 WINDZ (Out of 0.054 -1.028 0.320 0.0000 0.0000 0.0000
service)
7 DEAD -5.185E-03 -0.309 0.110 0.0000 0.0000 0.0000
7 IMPSOED 1.020E-04 -2.382 -0.192 0.0000 0.0000 0.0000
7 WINDX (In 0.247 -0.594 4.587E-07 0.0000 0.0000 0.0000
service)

LG Page 18 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

7 WINDY (In -6.540E-13 -0.247 -1.397E-13 0.0000 0.0000 0.0000

service)
7 WINDZ (In 1.908E-05 -0.445 -0.036 0.0000 0.0000 0.0000
service)
7 WINDX (Out of 0.083 -0.889 4.652E-03 0.0000 0.0000 0.0000
service)
7 WINDY (Out of -0.073 -0.637 6.977E-03 0.0000 0.0000 0.0000
service)
7 WINDZ (Out of -0.053 -0.723 0.241 0.0000 0.0000 0.0000
service)
43 DEAD -9.662E-05 0.748 0.673 0.0000 0.0000 0.0000
43 IMPSOED 1.901E-06 5.772 3.459 0.0000 0.0000 0.0000
43 WINDX (In -0.025 0.059 -9.174E-07 0.0000 0.0000 0.0000
service)
43 WINDY (In -1.219E-14 0.025 2.797E-13 0.0000 0.0000 0.0000
service)
43 WINDZ (In 3.556E-07 1.079 0.647 0.0000 0.0000 0.0000
service)
43 WINDX (Out of -0.448 0.073 -9.304E-03 0.0000 0.0000 0.0000
service)
43 WINDY (Out of -1.368E-03 -0.393 -0.014 0.0000 0.0000 0.0000
service)
43 WINDZ (Out of -9.792E-04 1.751 1.491 0.0000 0.0000 0.0000
service)
58 DEAD 9.662E-05 0.723 0.658 0.0000 0.0000 0.0000
58 IMPSOED -1.901E-06 5.772 3.459 0.0000 0.0000 0.0000
58 WINDX (In 0.074 -0.059 9.174E-07 0.0000 0.0000 0.0000
service)
58 WINDY (In 1.219E-14 0.025 -2.796E-13 0.0000 0.0000 0.0000
service)
58 WINDZ (In -3.556E-07 1.079 0.647 0.0000 0.0000 0.0000
service)
58 WINDX (Out of -0.291 -0.073 9.304E-03 0.0000 0.0000 0.0000
service)
58 WINDY (Out of 1.368E-03 -0.346 0.014 0.0000 0.0000 0.0000
service)
58 WINDZ (Out of 9.792E-04 1.503 1.342 0.0000 0.0000 0.0000
service)

9. Frame results
This section provides frame force results.

Table 20: Element Forces - Frames, Part 1 of 2

Table 20: Element Forces - Frames, Part 1 of 2
Frame Station OutputCase P V2 V3
m KN KN KN
1 0.00000 DEAD 0.000 0.115 1.110E-16
1 0.20000 DEAD 0.000 0.145 1.110E-16
1 0.20000 DEAD 0.717 -0.159 1.388E-16
1 0.50000 DEAD 0.717 -0.113 1.388E-16
1 0.50000 DEAD 0.717 -0.087 -4.274E-17
1 0.93333 DEAD 0.717 -0.020 -4.274E-17
1 1.36667 DEAD 0.717 0.046 -4.274E-17
1 1.80000 DEAD 0.717 0.112 -4.274E-17
1 0.00000 IMPSOED 0.000 3.075 6.661E-16
1 0.20000 IMPSOED 0.000 3.075 6.661E-16

LG Page 19 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

1 0.20000 IMPSOED 5.535 -0.384 6.661E-16

1 0.50000 IMPSOED 5.535 -0.384 6.661E-16
1 0.50000 IMPSOED 5.535 -0.384 -2.814E-16
1 0.93333 IMPSOED 5.535 -0.384 -2.814E-16
1 1.36667 IMPSOED 5.535 -0.384 -2.814E-16
1 1.80000 IMPSOED 5.535 -0.384 -2.814E-16
1 0.00000 WINDX (In 0.000 0.000 1.495
service)
1 0.20000 WINDX (In 0.000 0.000 1.495
service)
1 0.20000 WINDX (In -1.468E-06 9.174E-07 1.495
service)
1 0.50000 WINDX (In -1.468E-06 9.174E-07 1.495
service)
1 0.50000 WINDX (In 1.380 9.174E-07 -0.575
service)
1 0.93333 WINDX (In 1.380 9.174E-07 -0.575
service)
1 1.36667 WINDX (In 1.380 9.174E-07 -0.575
service)
1 1.80000 WINDX (In 1.380 9.174E-07 -0.575
service)
1 0.00000 WINDY (In 0.575 0.000 2.776E-17
service)
1 0.20000 WINDY (In 0.575 0.000 2.776E-17
service)
1 0.20000 WINDY (In 0.575 -2.797E-13 6.939E-17
service)
1 0.50000 WINDY (In 0.575 -2.797E-13 6.939E-17
service)
1 0.50000 WINDY (In 0.575 -2.794E-13 -3.014E-17
service)
1 0.93333 WINDY (In 0.575 -2.794E-13 -3.014E-17
service)
1 1.36667 WINDY (In 0.575 -2.794E-13 -3.014E-17
service)
1 1.80000 WINDY (In 0.575 -2.794E-13 -3.014E-17
service)
1 0.00000 WINDZ (In 3.553E-15 0.575 1.388E-16
service)
1 0.20000 WINDZ (In 3.553E-15 0.575 1.388E-16
service)
1 0.20000 WINDZ (In 1.035 -0.072 1.388E-16
service)
1 0.50000 WINDZ (In 1.035 -0.072 1.388E-16
service)
1 0.50000 WINDZ (In 1.035 -0.072 -5.301E-17
service)
1 0.93333 WINDZ (In 1.035 -0.072 -5.301E-17
service)
1 1.36667 WINDZ (In 1.035 -0.072 -5.301E-17
service)
1 1.80000 WINDZ (In 1.035 -0.072 -5.301E-17
service)
1 0.00000 WINDX (Out of 0.000 4.441E-16 1.537
service)
1 0.20000 WINDX (Out of 0.000 4.441E-16 1.597
service)
1 0.20000 WINDX (Out of -0.015 9.304E-03 1.880
service)
1 0.50000 WINDX (Out of -0.015 9.304E-03 1.970
service)

LG Page 20 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

1 0.50000 WINDX (Out of 2.065 9.304E-03 -0.880

service)
1 0.93333 WINDX (Out of 2.065 9.304E-03 -0.750
service)
1 1.36667 WINDX (Out of 2.065 9.304E-03 -0.620
service)
1 1.80000 WINDX (Out of 2.065 9.304E-03 -0.490
service)
1 0.00000 WINDY (Out of 0.225 4.441E-16 1.665E-16
service)
1 0.20000 WINDY (Out of 0.285 4.441E-16 1.665E-16
service)
1 0.20000 WINDY (Out of 0.546 0.014 2.220E-16
service)
1 0.50000 WINDY (Out of 0.636 0.014 2.220E-16
service)
1 0.50000 WINDY (Out of 0.906 0.014 -1.031E-16
service)
1 0.93333 WINDY (Out of 1.036 0.014 -1.031E-16
service)
1 1.36667 WINDY (Out of 1.166 0.014 -1.031E-16
service)
1 1.80000 WINDY (Out of 1.296 0.014 -1.031E-16
service)
1 0.00000 WINDZ (Out of -7.105E-15 0.225 2.220E-16
service)
1 0.20000 WINDZ (Out of -7.105E-15 0.285 2.220E-16
service)
1 0.20000 WINDZ (Out of 1.679 -0.482 3.331E-16
service)
1 0.50000 WINDZ (Out of 1.679 -0.392 3.331E-16
service)
1 0.50000 WINDZ (Out of 1.679 -0.121 -1.348E-16
service)
1 0.93333 WINDZ (Out of 1.679 8.792E-03 -1.348E-16
service)
1 1.36667 WINDZ (Out of 1.679 0.139 -1.348E-16
service)
1 1.80000 WINDZ (Out of 1.679 0.269 -1.348E-16
service)
2 0.00000 DEAD 0.000 0.115 -5.551E-17
2 0.20000 DEAD 0.000 0.145 -5.551E-17
2 0.20000 DEAD 0.694 -0.144 -1.435E-16
2 0.63333 DEAD 0.694 -0.078 -1.435E-16
2 1.06667 DEAD 0.694 -0.012 -1.435E-16
2 1.50000 DEAD 0.694 0.054 -1.435E-16
2 1.50000 DEAD 0.694 0.081 6.505E-16
2 1.80000 DEAD 0.694 0.127 6.505E-16
2 0.00000 IMPSOED 0.000 3.075 -2.220E-16
2 0.20000 IMPSOED 0.000 3.075 -2.220E-16
2 0.20000 IMPSOED 5.535 -0.384 -1.112E-15
2 0.63333 IMPSOED 5.535 -0.384 -1.112E-15
2 1.06667 IMPSOED 5.535 -0.384 -1.112E-15
2 1.50000 IMPSOED 5.535 -0.384 -1.112E-15
2 1.50000 IMPSOED 5.535 -0.384 5.026E-15
2 1.80000 IMPSOED 5.535 -0.384 5.026E-15
2 0.00000 WINDX (In 0.000 2.220E-16 -0.345
service)
2 0.20000 WINDX (In 0.000 2.220E-16 -0.345
service)

LG Page 21 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

2 0.20000 WINDX (In 1.468E-06 -9.174E-07 -0.345

service)
2 0.63333 WINDX (In 1.468E-06 -9.174E-07 -0.345
service)
2 1.06667 WINDX (In 1.468E-06 -9.174E-07 -0.345
service)
2 1.50000 WINDX (In 1.468E-06 -9.174E-07 -0.345
service)
2 1.50000 WINDX (In -1.380 -9.174E-07 1.725
service)
2 1.80000 WINDX (In -1.380 -9.174E-07 1.725
service)
2 0.00000 WINDY (In 0.575 -1.110E-16 -2.776E-17
service)
2 0.20000 WINDY (In 0.575 -1.110E-16 -2.776E-17
service)
2 0.20000 WINDY (In 0.575 2.794E-13 -1.147E-16
service)
2 0.63333 WINDY (In 0.575 2.794E-13 -1.147E-16
service)
2 1.06667 WINDY (In 0.575 2.794E-13 -1.147E-16
service)
2 1.50000 WINDY (In 0.575 2.794E-13 -1.147E-16
service)
2 1.50000 WINDY (In 0.575 2.794E-13 5.211E-16
service)
2 1.80000 WINDY (In 0.575 2.794E-13 5.211E-16
service)
2 0.00000 WINDZ (In 0.000 0.575 -2.776E-17
service)
2 0.20000 WINDZ (In 0.000 0.575 -2.776E-17
service)
2 0.20000 WINDZ (In 1.035 -0.072 -2.069E-16
service)
2 0.63333 WINDZ (In 1.035 -0.072 -2.069E-16
service)
2 1.06667 WINDZ (In 1.035 -0.072 -2.069E-16
service)
2 1.50000 WINDZ (In 1.035 -0.072 -2.069E-16
service)
2 1.50000 WINDZ (In 1.035 -0.072 9.399E-16
service)
2 1.80000 WINDZ (In 1.035 -0.072 9.399E-16
service)
2 0.00000 WINDX (Out of 0.000 -4.441E-16 -1.087
service)
2 0.20000 WINDX (Out of 0.000 -4.441E-16 -1.027
service)
2 0.20000 WINDX (Out of 0.015 -9.304E-03 -0.744
service)
2 0.63333 WINDX (Out of 0.015 -9.304E-03 -0.614
service)
2 1.06667 WINDX (Out of 0.015 -9.304E-03 -0.484
service)
2 1.50000 WINDX (Out of 0.015 -9.304E-03 -0.354
service)
2 1.50000 WINDX (Out of -2.065 -9.304E-03 3.037
service)
2 1.80000 WINDX (Out of -2.065 -9.304E-03 3.127
service)
2 0.00000 WINDY (Out of 0.225 -4.441E-16 -1.665E-16
service)

LG Page 22 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

2 0.20000 WINDY (Out of 0.285 -4.441E-16 -1.665E-16

service)
2 0.20000 WINDY (Out of 0.590 -0.014 -2.281E-16
service)
2 0.63333 WINDY (Out of 0.720 -0.014 -2.503E-16
service)
2 1.06667 WINDY (Out of 0.850 -0.014 -2.725E-16
service)
2 1.50000 WINDY (Out of 0.980 -0.014 -2.947E-16
service)
2 1.50000 WINDY (Out of 1.251 -0.014 1.209E-15
service)
2 1.80000 WINDY (Out of 1.341 -0.014 1.275E-15
service)
2 0.00000 WINDZ (Out of 0.000 0.225 -2.220E-16
service)
2 0.20000 WINDZ (Out of 0.000 0.285 -2.220E-16
service)
2 0.20000 WINDZ (Out of 1.441 -0.333 -3.192E-16
service)
2 0.63333 WINDZ (Out of 1.441 -0.203 -3.192E-16
service)
2 1.06667 WINDZ (Out of 1.441 -0.073 -3.192E-16
service)
2 1.50000 WINDZ (Out of 1.441 0.057 -3.192E-16
service)
2 1.50000 WINDZ (Out of 1.441 0.328 1.467E-15
service)
2 1.80000 WINDZ (Out of 1.441 0.418 1.467E-15
service)
59 0.00000 DEAD 0.000 -1.084E-19 5.551E-17
59 0.14500 DEAD 0.022 -1.084E-19 5.551E-17
59 0.14500 DEAD -0.058 9.662E-05 -0.031
59 0.75000 DEAD 0.034 9.662E-05 -0.031
59 0.91000 DEAD 0.058 9.662E-05 -0.031
59 0.91000 DEAD -0.092 -5.185E-03 0.408
59 1.14500 DEAD -0.056 -5.185E-03 0.408
59 1.14500 DEAD 0.056 -5.185E-03 -0.309
59 1.38000 DEAD 0.092 -5.185E-03 -0.309
59 1.38000 DEAD -0.018 -8.674E-19 2.220E-16
59 1.50000 DEAD 0.000 -8.674E-19 2.220E-16
59 0.00000 IMPSOED 0.000 0.000 0.000
59 0.14500 IMPSOED 0.000 0.000 0.000
59 0.14500 IMPSOED 0.000 -1.901E-06 -0.237
59 0.75000 IMPSOED 0.000 -1.901E-06 -0.237
59 0.91000 IMPSOED 0.000 -1.901E-06 -0.237
59 0.91000 IMPSOED 0.192 1.020E-04 3.153
59 1.14500 IMPSOED 0.192 1.020E-04 3.153
59 1.14500 IMPSOED -0.192 1.020E-04 -2.382
59 1.38000 IMPSOED -0.192 1.020E-04 -2.382
59 1.38000 IMPSOED 0.000 0.000 1.776E-15
59 1.50000 IMPSOED 0.000 0.000 1.776E-15
59 0.00000 WINDX (In 0.000 0.000 1.110E-16
service)
59 0.14500 WINDX (In 0.000 0.000 1.110E-16
service)
59 0.14500 WINDX (In 0.000 0.025 -0.059
service)
59 0.75000 WINDX (In 0.000 0.025 -0.059
service)

LG Page 23 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

59 0.91000 WINDX (In 0.000 0.025 -0.059

service)
59 0.91000 WINDX (In -4.587E-07 -0.328 0.786
service)
59 1.14500 WINDX (In -4.587E-07 -0.328 0.786
service)
59 1.14500 WINDX (In 4.587E-07 0.247 -0.594
service)
59 1.38000 WINDX (In 4.587E-07 0.247 -0.594
service)
59 1.38000 WINDX (In 0.000 0.000 0.000
service)
59 1.50000 WINDX (In 0.000 0.000 0.000
service)
59 0.00000 WINDY (In 0.000 0.000 2.776E-17
service)
59 0.14500 WINDY (In 0.000 0.000 2.776E-17
service)
59 0.14500 WINDY (In 0.000 1.219E-14 -0.025
service)
59 0.75000 WINDY (In 0.000 1.219E-14 -0.025
service)
59 0.91000 WINDY (In 0.000 1.219E-14 -0.025
service)
59 0.91000 WINDY (In 1.397E-13 -6.540E-13 0.328
service)
59 1.14500 WINDY (In 1.397E-13 -6.540E-13 0.328
service)
59 1.14500 WINDY (In -1.397E-13 -6.540E-13 -0.247
service)
59 1.38000 WINDY (In -1.397E-13 -6.540E-13 -0.247
service)
59 1.38000 WINDY (In 0.000 0.000 -1.110E-16
service)
59 1.50000 WINDY (In 0.000 0.000 -1.110E-16
service)
59 0.00000 WINDZ (In 0.000 0.000 5.551E-17
service)
59 0.14500 WINDZ (In 0.000 0.000 5.551E-17
service)
59 0.14500 WINDZ (In 0.000 -3.556E-07 -0.044
service)
59 0.75000 WINDZ (In 0.000 -3.556E-07 -0.044
service)
59 0.91000 WINDZ (In 0.000 -3.556E-07 -0.044
service)
59 0.91000 WINDZ (In 0.036 1.908E-05 0.590
service)
59 1.14500 WINDZ (In 0.036 1.908E-05 0.590
service)
59 1.14500 WINDZ (In -0.036 1.908E-05 -0.445
service)
59 1.38000 WINDZ (In -0.036 1.908E-05 -0.445
service)
59 1.38000 WINDZ (In 0.000 0.000 0.000
service)
59 1.50000 WINDZ (In 0.000 0.000 0.000
service)
59 0.00000 WINDX (Out of 0.000 -5.551E-17 0.000
service)
59 0.14500 WINDX (Out of 0.000 -0.044 0.000
service)

LG Page 24 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

59 0.14500 WINDX (Out of 0.000 0.121 -0.088

service)
59 0.75000 WINDX (Out of 0.000 -0.060 -0.088
service)
59 0.91000 WINDX (Out of 0.000 -0.108 -0.088
service)
59 0.91000 WINDX (Out of -4.652E-03 -0.230 1.176
service)
59 1.14500 WINDX (Out of -4.652E-03 -0.301 1.176
service)
59 1.14500 WINDX (Out of 4.652E-03 0.189 -0.889
service)
59 1.38000 WINDX (Out of 4.652E-03 0.119 -0.889
service)
59 1.38000 WINDX (Out of 0.000 0.036 4.441E-16
service)
59 1.50000 WINDX (Out of 0.000 3.469E-17 4.441E-16
service)
59 0.00000 WINDY (Out of 0.000 -1.735E-18 2.776E-17
service)
59 0.14500 WINDY (Out of 0.000 -1.735E-18 -0.044
service)
59 0.14500 WINDY (Out of 0.000 1.368E-03 0.044
service)
59 0.75000 WINDY (Out of 0.000 1.368E-03 -0.138
service)
59 0.91000 WINDY (Out of 0.000 1.368E-03 -0.186
service)
59 0.91000 WINDY (Out of -6.977E-03 -0.073 0.836
service)
59 1.14500 WINDY (Out of -6.977E-03 -0.073 0.766
service)
59 1.14500 WINDY (Out of 6.977E-03 -0.073 -0.530
service)
59 1.38000 WINDY (Out of 6.977E-03 -0.073 -0.601
service)
59 1.38000 WINDY (Out of 0.000 -1.388E-17 0.036
service)
59 1.50000 WINDY (Out of 0.000 -1.388E-17 -1.874E-16
service)
59 0.00000 WINDZ (Out of 0.000 0.000 0.000
service)
59 0.14500 WINDZ (Out of 0.044 0.000 0.000
service)
59 0.14500 WINDZ (Out of -0.115 9.792E-04 -0.072
service)
59 0.75000 WINDZ (Out of 0.067 9.792E-04 -0.072
service)
59 0.91000 WINDZ (Out of 0.115 9.792E-04 -0.072
service)
59 0.91000 WINDZ (Out of -0.205 -0.053 0.957
service)
59 1.14500 WINDZ (Out of -0.134 -0.053 0.957
service)
59 1.14500 WINDZ (Out of 0.134 -0.053 -0.723
service)
59 1.38000 WINDZ (Out of 0.205 -0.053 -0.723
service)
59 1.38000 WINDZ (Out of -0.036 0.000 0.000
service)
59 1.50000 WINDZ (Out of 0.000 0.000 0.000
service)
62 0.00000 DEAD -0.922 -0.122 0.000

LG Page 25 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

62 0.94340 DEAD -0.846 1.388E-17 0.000

62 1.88680 DEAD -0.769 0.122 0.000
62 0.00000 IMPSOED -6.527 0.000 0.000
62 0.94340 IMPSOED -6.527 0.000 0.000
62 1.88680 IMPSOED -6.527 0.000 0.000
62 0.00000 WINDX (In 1.731E-06 0.000 0.000
service)
62 0.94340 WINDX (In 1.731E-06 0.000 0.000
service)
62 1.88680 WINDX (In 1.731E-06 0.000 0.000
service)
62 0.00000 WINDY (In -5.275E-13 0.000 0.000
service)
62 0.94340 WINDY (In -5.275E-13 0.000 0.000
service)
62 1.88680 WINDY (In -5.275E-13 0.000 0.000
service)
62 0.00000 WINDZ (In -1.221 0.000 0.000
service)
62 0.94340 WINDZ (In -1.221 0.000 0.000
service)
62 1.88680 WINDZ (In -1.221 0.000 0.000
service)
62 0.00000 WINDX (Out of 0.018 0.000 0.283
service)
62 0.94340 WINDX (Out of 0.018 0.000 5.551E-17
service)
62 1.88680 WINDX (Out of 0.018 0.000 -0.283
service)
62 0.00000 WINDY (Out of 0.266 -0.150 0.000
service)
62 0.94340 WINDY (Out of 0.026 5.551E-17 0.000
service)
62 1.88680 WINDY (Out of -0.214 0.150 0.000
service)
62 0.00000 WINDZ (Out of -2.130 -0.240 0.000
service)
62 0.94340 WINDZ (Out of -1.980 -1.110E-16 0.000
service)
62 1.88680 WINDZ (Out of -1.830 0.240 0.000
service)
70 0.00000 DEAD 0.000 0.000 0.000
70 0.14500 DEAD 0.022 0.000 0.000
70 0.14500 DEAD -0.058 -9.662E-05 -0.030
70 0.75000 DEAD 0.034 -9.662E-05 -0.030
70 0.91000 DEAD 0.058 -9.662E-05 -0.030
70 0.91000 DEAD -0.099 5.185E-03 0.395
70 1.14500 DEAD -0.063 5.185E-03 0.395
70 1.14500 DEAD 0.063 5.185E-03 -0.299
70 1.38000 DEAD 0.099 5.185E-03 -0.299
70 1.38000 DEAD -0.018 0.000 0.000
70 1.50000 DEAD 0.000 0.000 0.000
70 0.00000 IMPSOED 0.000 0.000 0.000
70 0.14500 IMPSOED 0.000 0.000 0.000
70 0.14500 IMPSOED 0.000 1.901E-06 -0.237
70 0.75000 IMPSOED 0.000 1.901E-06 -0.237
70 0.91000 IMPSOED 0.000 1.901E-06 -0.237
70 0.91000 IMPSOED 0.192 -1.020E-04 3.153
70 1.14500 IMPSOED 0.192 -1.020E-04 3.153
70 1.14500 IMPSOED -0.192 -1.020E-04 -2.382
70 1.38000 IMPSOED -0.192 -1.020E-04 -2.382

LG Page 26 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

70 1.38000 IMPSOED 0.000 0.000 0.000

70 1.50000 IMPSOED 0.000 0.000 0.000
70 0.00000 WINDX (In 0.000 1.110E-16 0.000
service)
70 0.14500 WINDX (In 0.000 1.110E-16 0.000
service)
70 0.14500 WINDX (In 0.000 -0.074 0.059
service)
70 0.75000 WINDX (In 0.000 -0.074 0.059
service)
70 0.91000 WINDX (In 0.000 -0.074 0.059
service)
70 0.91000 WINDX (In 4.587E-07 0.983 -0.786
service)
70 1.14500 WINDX (In 4.587E-07 0.983 -0.786
service)
70 1.14500 WINDX (In -4.587E-07 -0.742 0.594
service)
70 1.38000 WINDX (In -4.587E-07 -0.742 0.594
service)
70 1.38000 WINDX (In 0.000 0.000 4.441E-16
service)
70 1.50000 WINDX (In 0.000 0.000 4.441E-16
service)
70 0.00000 WINDY (In 0.000 0.000 2.776E-17
service)
70 0.14500 WINDY (In 0.000 0.000 2.776E-17
service)
70 0.14500 WINDY (In 0.000 -1.219E-14 -0.025
service)
70 0.75000 WINDY (In 0.000 -1.219E-14 -0.025
service)
70 0.91000 WINDY (In 0.000 -1.219E-14 -0.025
service)
70 0.91000 WINDY (In -1.397E-13 6.541E-13 0.328
service)
70 1.14500 WINDY (In -1.397E-13 6.541E-13 0.328
service)
70 1.14500 WINDY (In 1.397E-13 6.540E-13 -0.247
service)
70 1.38000 WINDY (In 1.397E-13 6.540E-13 -0.247
service)
70 1.38000 WINDY (In 0.000 0.000 0.000
service)
70 1.50000 WINDY (In 0.000 0.000 0.000
service)
70 0.00000 WINDZ (In 0.000 0.000 0.000
service)
70 0.14500 WINDZ (In 0.000 0.000 0.000
service)
70 0.14500 WINDZ (In 0.000 3.556E-07 -0.044
service)
70 0.75000 WINDZ (In 0.000 3.556E-07 -0.044
service)
70 0.91000 WINDZ (In 0.000 3.556E-07 -0.044
service)
70 0.91000 WINDZ (In 0.036 -1.908E-05 0.590
service)
70 1.14500 WINDZ (In 0.036 -1.908E-05 0.590
service)
70 1.14500 WINDZ (In -0.036 -1.908E-05 -0.445
service)

LG Page 27 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

70 1.38000 WINDZ (In -0.036 -1.908E-05 -0.445

service)
70 1.38000 WINDZ (In 0.000 0.000 -2.220E-16
service)
70 1.50000 WINDZ (In 0.000 0.000 -2.220E-16
service)
70 0.00000 WINDX (Out of 0.000 0.000 -1.110E-16
service)
70 0.14500 WINDX (Out of 0.000 -0.044 -1.110E-16
service)
70 0.14500 WINDX (Out of 0.000 -0.035 0.088
service)
70 0.75000 WINDX (Out of 0.000 -0.217 0.088
service)
70 0.91000 WINDX (Out of 0.000 -0.265 0.088
service)
70 0.91000 WINDX (Out of 4.652E-03 1.928 -1.176
service)
70 1.14500 WINDX (Out of 4.652E-03 1.858 -1.176
service)
70 1.14500 WINDX (Out of -4.652E-03 -1.269 0.889
service)
70 1.38000 WINDX (Out of -4.652E-03 -1.340 0.889
service)
70 1.38000 WINDX (Out of 0.000 0.036 0.000
service)
70 1.50000 WINDX (Out of 0.000 4.788E-16 0.000
service)
70 0.00000 WINDY (Out of 0.000 1.735E-18 -2.776E-17
service)
70 0.14500 WINDY (Out of 0.000 1.735E-18 -0.044
service)
70 0.14500 WINDY (Out of 0.000 -1.368E-03 0.042
service)
70 0.75000 WINDY (Out of 0.000 -1.368E-03 -0.140
service)
70 0.91000 WINDY (Out of 0.000 -1.368E-03 -0.188
service)
70 0.91000 WINDY (Out of 6.977E-03 0.073 0.862
service)
70 1.14500 WINDY (Out of 6.977E-03 0.073 0.791
service)
70 1.14500 WINDY (Out of -6.977E-03 0.073 -0.550
service)
70 1.38000 WINDY (Out of -6.977E-03 0.073 -0.620
service)
70 1.38000 WINDY (Out of 0.000 0.000 0.036
service)
70 1.50000 WINDY (Out of 0.000 0.000 -1.874E-16
service)
70 0.00000 WINDZ (Out of 0.000 0.000 1.110E-16
service)
70 0.14500 WINDZ (Out of 0.044 0.000 1.110E-16
service)
70 0.14500 WINDZ (Out of -0.115 -9.792E-04 -0.062
service)
70 0.75000 WINDZ (Out of 0.067 -9.792E-04 -0.062
service)
70 0.91000 WINDZ (Out of 0.115 -9.792E-04 -0.062
service)
70 0.91000 WINDZ (Out of -0.279 0.053 0.821
service)

LG Page 28 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

70 1.14500 WINDZ (Out of -0.209 0.053 0.821

service)
70 1.14500 WINDZ (Out of 0.209 0.053 -0.620
service)
70 1.38000 WINDZ (Out of 0.279 0.053 -0.620
service)
70 1.38000 WINDZ (Out of -0.036 6.939E-18 0.000
service)
70 1.50000 WINDZ (Out of 0.000 6.939E-18 0.000
service)
71 0.00000 DEAD -0.894 -0.122 0.000
71 0.94340 DEAD -0.818 1.388E-17 0.000
71 1.88680 DEAD -0.742 0.122 0.000
71 0.00000 IMPSOED -6.527 0.000 0.000
71 0.94340 IMPSOED -6.527 0.000 0.000
71 1.88680 IMPSOED -6.527 0.000 0.000
71 0.00000 WINDX (In -1.731E-06 0.000 0.000
service)
71 0.94340 WINDX (In -1.731E-06 0.000 0.000
service)
71 1.88680 WINDX (In -1.731E-06 0.000 0.000
service)
71 0.00000 WINDY (In 5.275E-13 0.000 0.000
service)
71 0.94340 WINDY (In 5.275E-13 0.000 0.000
service)
71 1.88680 WINDY (In 5.275E-13 0.000 0.000
service)
71 0.00000 WINDZ (In -1.221 0.000 0.000
service)
71 0.94340 WINDZ (In -1.221 0.000 0.000
service)
71 1.88680 WINDZ (In -1.221 0.000 0.000
service)
71 0.00000 WINDX (Out of -0.018 0.000 0.283
service)
71 0.94340 WINDX (Out of -0.018 0.000 5.551E-17
service)
71 1.88680 WINDX (Out of -0.018 0.000 -0.283
service)
71 0.00000 WINDY (Out of 0.214 -0.150 0.000
service)
71 0.94340 WINDY (Out of -0.026 5.551E-17 0.000
service)
71 1.88680 WINDY (Out of -0.266 0.150 0.000
service)
71 0.00000 WINDZ (Out of -1.849 -0.240 0.000
service)
71 0.94340 WINDZ (Out of -1.699 -1.110E-16 0.000
service)
71 1.88680 WINDZ (Out of -1.549 0.240 0.000
service)
74 0.00000 DEAD 0.000 -0.115 1.735E-18
74 0.37500 DEAD 0.000 -0.057 1.735E-18
74 0.75000 DEAD 0.000 6.321E-08 1.735E-18
74 0.75000 DEAD -2.220E-16 6.321E-08 3.469E-18
74 1.12500 DEAD -2.220E-16 0.057 3.469E-18
74 1.50000 DEAD -2.220E-16 0.115 3.469E-18
74 0.00000 IMPSOED 0.000 -3.075 5.551E-17
74 0.37500 IMPSOED 0.000 -3.075 5.551E-17
74 0.75000 IMPSOED 0.000 -3.075 5.551E-17

LG Page 29 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

74 0.75000 IMPSOED -1.776E-15 3.075 -1.388E-17

74 1.12500 IMPSOED -1.776E-15 3.075 -1.388E-17
74 1.50000 IMPSOED -1.776E-15 3.075 -1.388E-17
74 0.00000 WINDX (In 1.495 -1.388E-17 -6.939E-18
service)
74 0.37500 WINDX (In 1.495 -1.388E-17 -6.939E-18
service)
74 0.75000 WINDX (In 1.495 -1.388E-17 -6.939E-18
service)
74 0.75000 WINDX (In 0.345 -3.469E-17 -2.082E-17
service)
74 1.12500 WINDX (In 0.345 -3.469E-17 -2.082E-17
service)
74 1.50000 WINDX (In 0.345 -3.469E-17 -2.082E-17
service)
74 0.00000 WINDY (In 0.000 -3.469E-18 -0.575
service)
74 0.37500 WINDY (In 0.000 -3.469E-18 -0.575
service)
74 0.75000 WINDY (In 0.000 -3.469E-18 -0.575
service)
74 0.75000 WINDY (In -1.110E-16 0.000 0.575
service)
74 1.12500 WINDY (In -1.110E-16 0.000 0.575
service)
74 1.50000 WINDY (In -1.110E-16 0.000 0.575
service)
74 0.00000 WINDZ (In 0.000 -0.575 6.939E-18
service)
74 0.37500 WINDZ (In 0.000 -0.575 6.939E-18
service)
74 0.75000 WINDZ (In 0.000 -0.575 6.939E-18
service)
74 0.75000 WINDZ (In -2.220E-16 0.575 3.469E-18
service)
74 1.12500 WINDZ (In -2.220E-16 0.575 3.469E-18
service)
74 1.50000 WINDZ (In -2.220E-16 0.575 3.469E-18
service)
74 0.00000 WINDX (Out of 1.537 -1.388E-17 0.000
service)
74 0.37500 WINDX (Out of 1.424 -1.388E-17 0.000
service)
74 0.75000 WINDX (Out of 1.312 -1.388E-17 0.000
service)
74 0.75000 WINDX (Out of 1.312 -1.388E-17 -1.388E-17
service)
74 1.12500 WINDX (Out of 1.199 -1.388E-17 -1.388E-17
service)
74 1.50000 WINDX (Out of 1.087 -1.388E-17 -1.388E-17
service)
74 0.00000 WINDY (Out of 0.000 6.939E-18 -0.225
service)
74 0.37500 WINDY (Out of 0.000 6.939E-18 -0.112
service)
74 0.75000 WINDY (Out of 0.000 6.939E-18 1.242E-07
service)
74 0.75000 WINDY (Out of 0.000 6.939E-18 1.242E-07
service)
74 1.12500 WINDY (Out of 0.000 6.939E-18 0.113
service)
74 1.50000 WINDY (Out of 0.000 6.939E-18 0.225
service)

LG Page 30 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

74 0.00000 WINDZ (Out of 0.000 -0.225 -6.939E-18

service)
74 0.37500 WINDZ (Out of 0.000 -0.112 -6.939E-18
service)
74 0.75000 WINDZ (Out of 0.000 1.242E-07 -6.939E-18
service)
74 0.75000 WINDZ (Out of -4.441E-16 1.242E-07 6.939E-18
service)
74 1.12500 WINDZ (Out of -4.441E-16 0.113 6.939E-18
service)
74 1.50000 WINDZ (Out of -4.441E-16 0.225 6.939E-18
service)
76 0.00000 DEAD -1.665E-16 -0.027 -5.204E-18
76 0.45069 DEAD -1.665E-16 -0.013 -5.204E-18
76 0.90139 DEAD -1.665E-16 -2.429E-17 -5.204E-18
76 1.35208 DEAD -1.665E-16 0.013 -5.204E-18
76 1.80278 DEAD -1.665E-16 0.027 -5.204E-18
76 0.00000 IMPSOED -1.332E-15 0.000 0.000
76 0.45069 IMPSOED -1.332E-15 0.000 0.000
76 0.90139 IMPSOED -1.332E-15 0.000 0.000
76 1.35208 IMPSOED -1.332E-15 0.000 0.000
76 1.80278 IMPSOED -1.332E-15 0.000 0.000
76 0.00000 WINDX (In -2.488 0.000 0.000
service)
76 0.45069 WINDX (In -2.488 0.000 0.000
service)
76 0.90139 WINDX (In -2.488 0.000 0.000
service)
76 1.35208 WINDX (In -2.488 0.000 0.000
service)
76 1.80278 WINDX (In -2.488 0.000 0.000
service)
76 0.00000 WINDY (In -1.527E-16 0.000 0.000
service)
76 0.45069 WINDY (In -1.527E-16 0.000 0.000
service)
76 0.90139 WINDY (In -1.527E-16 0.000 0.000
service)
76 1.35208 WINDY (In -1.527E-16 0.000 0.000
service)
76 1.80278 WINDY (In -1.527E-16 0.000 0.000
service)
76 0.00000 WINDZ (In -2.776E-16 0.000 0.000
service)
76 0.45069 WINDZ (In -2.776E-16 0.000 0.000
service)
76 0.90139 WINDZ (In -2.776E-16 0.000 0.000
service)
76 1.35208 WINDZ (In -2.776E-16 0.000 0.000
service)
76 1.80278 WINDZ (In -2.776E-16 0.000 0.000
service)
76 0.00000 WINDX (Out of -3.975 -7.286E-17 0.150
service)
76 0.45069 WINDX (Out of -3.863 -7.286E-17 0.075
service)
76 0.90139 WINDX (Out of -3.750 -7.286E-17 1.388E-16
service)
76 1.35208 WINDX (Out of -3.638 -7.286E-17 -0.075
service)
76 1.80278 WINDX (Out of -3.525 -7.286E-17 -0.150
service)

LG Page 31 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

76 0.00000 WINDY (Out of 0.150 -4.857E-17 0.225

service)
76 0.45069 WINDY (Out of 0.075 -4.857E-17 0.113
service)
76 0.90139 WINDY (Out of -3.886E-16 -4.857E-17 2.776E-17
service)
76 1.35208 WINDY (Out of -0.075 -4.857E-17 -0.113
service)
76 1.80278 WINDY (Out of -0.150 -4.857E-17 -0.225
service)
76 0.00000 WINDZ (Out of -4.996E-16 -0.270 1.527E-16
service)
76 0.45069 WINDZ (Out of -4.996E-16 -0.135 1.527E-16
service)
76 0.90139 WINDZ (Out of -4.996E-16 -3.331E-16 1.527E-16
service)
76 1.35208 WINDZ (Out of -4.996E-16 0.135 1.527E-16
service)
76 1.80278 WINDZ (Out of -4.996E-16 0.270 1.527E-16
service)

Table 20: Element Forces - Frames, Part 2 of 2

Table 20: Element Forces - Frames, Part 2 of 2
Frame Station OutputCase T M2 M3
m KN-m KN-m KN-m
1 0.00000 DEAD 0.0000 0.0000 0.0000
1 0.20000 DEAD 0.0000 -2.220E-17 -0.0260
1 0.20000 DEAD 0.0000 -2.082E-17 -0.0260
1 0.50000 DEAD 0.0000 -6.245E-17 0.0149
1 0.50000 DEAD 0.0024 -5.532E-17 0.0165
1 0.93333 DEAD 0.0024 -3.680E-17 0.0396
1 1.36667 DEAD 0.0024 -1.828E-17 0.0342
1 1.80000 DEAD 0.0024 2.385E-19 1.908E-17
1 0.00000 IMPSOED 0.0000 0.0000 0.0000
1 0.20000 IMPSOED 0.0000 -1.332E-16 -0.6150
1 0.20000 IMPSOED 4.608E-19 -1.388E-16 -0.6150
1 0.50000 IMPSOED 4.608E-19 -3.386E-16 -0.4997
1 0.50000 IMPSOED -4.650E-05 -3.639E-16 -0.4996
1 0.93333 IMPSOED -4.650E-05 -2.420E-16 -0.3331
1 1.36667 IMPSOED -4.650E-05 -1.200E-16 -0.1665
1 1.80000 IMPSOED -4.650E-05 1.908E-18 1.388E-16
1 0.00000 WINDX (In 0.0000 0.0000 0.0000
service)
1 0.20000 WINDX (In 0.0000 -0.2990 0.0000
service)
1 0.20000 WINDX (In 2.099E-16 -0.2990 -1.665E-16
service)
1 0.50000 WINDX (In 2.099E-16 -0.7475 -2.752E-07
service)
1 0.50000 WINDX (In -9.786E-07 -0.7475 1.193E-06
service)
1 0.93333 WINDX (In -9.786E-07 -0.4983 7.951E-07
service)
1 1.36667 WINDX (In -9.786E-07 -0.2492 3.976E-07
service)
1 1.80000 WINDX (In -9.786E-07 4.163E-16 2.689E-18
service)
1 0.00000 WINDY (In 0.0000 0.0000 0.0000
service)

LG Page 32 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

1 0.20000 WINDY (In 0.0000 -5.551E-18 0.0000

service)
1 0.20000 WINDY (In 3.612E-20 -1.041E-17 -2.776E-17
service)
1 0.50000 WINDY (In 3.612E-20 -3.123E-17 8.387E-14
service)
1 0.50000 WINDY (In 2.981E-13 -3.909E-17 -3.633E-13
service)
1 0.93333 WINDY (In 2.981E-13 -2.603E-17 -2.422E-13
service)
1 1.36667 WINDY (In 2.981E-13 -1.297E-17 -1.211E-13
service)
1 1.80000 WINDY (In 2.981E-13 8.674E-20 7.806E-19
service)
1 0.00000 WINDZ (In 0.0000 0.0000 0.0000
service)
1 0.20000 WINDZ (In 0.0000 -2.776E-17 -0.1150
service)
1 0.20000 WINDZ (In 6.099E-20 -2.082E-17 -0.1150
service)
1 0.50000 WINDZ (In 6.099E-20 -6.245E-17 -0.0934
service)
1 0.50000 WINDZ (In -8.695E-06 -6.869E-17 -0.0934
service)
1 0.93333 WINDZ (In -8.695E-06 -4.571E-17 -0.0623
service)
1 1.36667 WINDZ (In -8.695E-06 -2.274E-17 -0.0311
service)
1 1.80000 WINDZ (In -8.695E-06 2.277E-19 3.123E-17
service)
1 0.00000 WINDX (Out of 0.0000 0.0000 0.0000
service)
1 0.20000 WINDX (Out of 0.0000 -0.3133 -8.882E-17
service)
1 0.20000 WINDX (Out of 2.359E-16 -0.3133 -1.110E-16
service)
1 0.50000 WINDX (Out of 2.359E-16 -0.8908 -0.0028
service)
1 0.50000 WINDX (Out of 0.0223 -0.8908 0.0121
service)
1 0.93333 WINDX (Out of 0.0223 -0.5375 0.0081
service)
1 1.36667 WINDX (Out of 0.0223 -0.2406 0.0040
service)
1 1.80000 WINDX (Out of 0.0223 3.227E-16 2.602E-18
service)
1 0.00000 WINDY (Out of 0.0000 0.0000 0.0000
service)
1 0.20000 WINDY (Out of 0.0000 -3.331E-17 -8.882E-17
service)
1 0.20000 WINDY (Out of -2.776E-17 -6.939E-17 0.0000
service)
1 0.50000 WINDY (Out of -2.776E-17 -1.360E-16 -0.0042
service)
1 0.50000 WINDY (Out of 0.0335 -1.338E-16 0.0181
service)
1 0.93333 WINDY (Out of 0.0335 -8.916E-17 0.0121
service)
1 1.36667 WINDY (Out of 0.0335 -4.448E-17 0.0060
service)
1 1.80000 WINDY (Out of 0.0335 2.074E-19 3.469E-18
service)

LG Page 33 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

1 0.00000 WINDZ (Out of 0.0000 0.0000 0.0000

service)
1 0.20000 WINDZ (Out of 0.0000 -4.441E-17 -0.0510
service)
1 0.20000 WINDZ (Out of -1.388E-17 -6.939E-17 -0.0510
service)
1 0.50000 WINDZ (Out of -1.388E-17 -1.693E-16 0.0800
service)
1 0.50000 WINDZ (Out of 0.0239 -1.748E-16 0.0959
service)
1 0.93333 WINDZ (Out of 0.0239 -1.164E-16 0.1203
service)
1 1.36667 WINDZ (Out of 0.0239 -5.796E-17 0.0883
service)
1 1.80000 WINDZ (Out of 0.0239 4.543E-19 6.592E-17
service)
2 0.00000 DEAD 0.0000 0.0000 0.0000
2 0.20000 DEAD 0.0000 1.110E-17 -0.0260
2 0.20000 DEAD -4.120E-18 9.324E-18 -0.0260
2 0.63333 DEAD -4.120E-18 7.153E-17 0.0223
2 1.06667 DEAD -4.120E-18 1.337E-16 0.0418
2 1.50000 DEAD -4.120E-18 1.959E-16 0.0327
2 1.50000 DEAD -0.0024 1.956E-16 0.0311
2 1.80000 DEAD -0.0024 4.405E-19 2.515E-17
2 0.00000 IMPSOED 0.0000 0.0000 0.0000
2 0.20000 IMPSOED 0.0000 4.441E-17 -0.6150
2 0.20000 IMPSOED -1.045E-16 6.939E-17 -0.6150
2 0.63333 IMPSOED -1.045E-16 5.512E-16 -0.4484
2 1.06667 IMPSOED -1.045E-16 1.033E-15 -0.2818
2 1.50000 IMPSOED -1.045E-16 1.515E-15 -0.1153
2 1.50000 IMPSOED 4.650E-05 1.516E-15 -0.1153
2 1.80000 IMPSOED 4.650E-05 7.633E-18 -3.331E-16
2 0.00000 WINDX (In 0.0000 0.0000 0.0000
service)
2 0.20000 WINDX (In 0.0000 0.0690 -4.441E-17
service)
2 0.20000 WINDX (In 4.245E-17 0.0690 -3.469E-18
service)
2 0.63333 WINDX (In 4.245E-17 0.2185 3.976E-07
service)
2 1.06667 WINDX (In 4.245E-17 0.3680 7.951E-07
service)
2 1.50000 WINDX (In 4.245E-17 0.5175 1.193E-06
service)
2 1.50000 WINDX (In 9.786E-07 0.5175 -2.752E-07
service)
2 1.80000 WINDX (In 9.786E-07 7.772E-16 -9.714E-18
service)
2 0.00000 WINDY (In 0.0000 0.0000 0.0000
service)
2 0.20000 WINDY (In 0.0000 5.551E-18 2.220E-17
service)
2 0.20000 WINDY (In 5.330E-20 7.589E-18 6.072E-18
service)
2 0.63333 WINDY (In 5.330E-20 5.730E-17 -1.211E-13
service)
2 1.06667 WINDY (In 5.330E-20 1.070E-16 -2.422E-13
service)
2 1.50000 WINDY (In 5.330E-20 1.567E-16 -3.633E-13
service)

LG Page 34 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

2 1.50000 WINDY (In -2.981E-13 1.570E-16 8.383E-14

service)
2 1.80000 WINDY (In -2.981E-13 6.939E-19 2.776E-18
service)
2 0.00000 WINDZ (In 0.0000 0.0000 0.0000
service)
2 0.20000 WINDZ (In 0.0000 5.551E-18 -0.1150
service)
2 0.20000 WINDZ (In -1.956E-17 1.453E-17 -0.1150
service)
2 0.63333 WINDZ (In -1.956E-17 1.042E-16 -0.0839
service)
2 1.06667 WINDZ (In -1.956E-17 1.938E-16 -0.0527
service)
2 1.50000 WINDZ (In -1.956E-17 2.835E-16 -0.0216
service)
2 1.50000 WINDZ (In 8.695E-06 2.835E-16 -0.0216
service)
2 1.80000 WINDZ (In 8.695E-06 1.561E-18 -5.551E-17
service)
2 0.00000 WINDX (Out of 0.0000 0.0000 0.0000
service)
2 0.20000 WINDX (Out of 0.0000 0.2113 8.882E-17
service)
2 0.20000 WINDX (Out of 4.424E-17 0.2113 -5.638E-18
service)
2 0.63333 WINDX (Out of 4.424E-17 0.5054 0.0040
service)
2 1.06667 WINDX (Out of 4.424E-17 0.7432 0.0081
service)
2 1.50000 WINDX (Out of 4.424E-17 0.9246 0.0121
service)
2 1.50000 WINDX (Out of -0.0223 0.9246 -0.0028
service)
2 1.80000 WINDX (Out of -0.0223 1.063E-15 -1.301E-18
service)
2 0.00000 WINDY (Out of 0.0000 0.0000 0.0000
service)
2 0.20000 WINDY (Out of 0.0000 3.331E-17 8.882E-17
service)
2 0.20000 WINDY (Out of 1.735E-18 3.394E-17 2.082E-17
service)
2 0.63333 WINDY (Out of 1.735E-18 1.376E-16 0.0060
service)
2 1.06667 WINDY (Out of 1.735E-18 2.509E-16 0.0121
service)
2 1.50000 WINDY (Out of 1.735E-18 3.738E-16 0.0181
service)
2 1.50000 WINDY (Out of -0.0335 3.735E-16 -0.0042
service)
2 1.80000 WINDY (Out of -0.0335 9.151E-19 3.383E-17
service)
2 0.00000 WINDZ (Out of 0.0000 0.0000 0.0000
service)
2 0.20000 WINDZ (Out of 0.0000 4.441E-17 -0.0510
service)
2 0.20000 WINDZ (Out of -5.204E-18 2.906E-17 -0.0510
service)
2 0.63333 WINDZ (Out of -5.204E-18 1.674E-16 0.0649
service)
2 1.06667 WINDZ (Out of -5.204E-18 3.057E-16 0.1245
service)

LG Page 35 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

2 1.50000 WINDZ (Out of -5.204E-18 4.440E-16 0.1278

service)
2 1.50000 WINDZ (Out of -0.0239 4.412E-16 0.1119
service)
2 1.80000 WINDZ (Out of -0.0239 1.084E-18 2.307E-16
service)
59 0.00000 DEAD 0.0000 0.0000 0.0000
59 0.14500 DEAD 0.0000 -8.049E-18 1.572E-20
59 0.14500 DEAD -3.469E-18 -1.561E-17 -2.866E-18
59 0.75000 DEAD -3.469E-18 0.0186 -5.846E-05
59 0.91000 DEAD -3.469E-18 0.0235 -7.392E-05
59 0.91000 DEAD -6.939E-18 0.0235 -7.392E-05
59 1.14500 DEAD -6.939E-18 -0.0725 0.0011
59 1.14500 DEAD -3.469E-18 -0.0725 -0.0012
59 1.38000 DEAD -3.469E-18 2.776E-17 4.337E-19
59 1.38000 DEAD 0.0000 5.551E-17 1.084E-19
59 1.50000 DEAD 0.0000 2.887E-17 2.125E-19
59 0.00000 IMPSOED 0.0000 0.0000 0.0000
59 0.14500 IMPSOED 0.0000 0.0000 0.0000
59 0.14500 IMPSOED 1.084E-18 -9.714E-17 9.285E-19
59 0.75000 IMPSOED 1.084E-18 0.1432 1.150E-06
59 0.91000 IMPSOED 1.084E-18 0.1811 1.455E-06
59 0.91000 IMPSOED 2.602E-18 0.1811 1.455E-06
59 1.14500 IMPSOED 2.602E-18 -0.5598 -2.252E-05
59 1.14500 IMPSOED 8.674E-19 -0.5598 2.398E-05
59 1.38000 IMPSOED 8.674E-19 0.0000 0.0000
59 1.38000 IMPSOED 0.0000 3.331E-16 0.0000
59 1.50000 IMPSOED 0.0000 1.199E-16 0.0000
59 0.00000 WINDX (In 0.0000 0.0000 0.0000
service)
59 0.14500 WINDX (In 0.0000 -1.610E-17 0.0000
service)
59 0.14500 WINDX (In 2.220E-16 -2.082E-17 2.272E-16
service)
59 0.75000 WINDX (In 2.220E-16 0.0357 -0.0149
service)
59 0.91000 WINDX (In 2.220E-16 0.0452 -0.0188
service)
59 0.91000 WINDX (In 6.661E-16 0.0452 -0.0188
service)
59 1.14500 WINDX (In 6.661E-16 -0.1396 0.0582
service)
59 1.14500 WINDX (In 2.220E-16 -0.1396 0.0582
service)
59 1.38000 WINDX (In 2.220E-16 8.327E-17 -6.939E-18
service)
59 1.38000 WINDX (In 0.0000 5.551E-17 -4.163E-17
service)
59 1.50000 WINDX (In 0.0000 5.551E-17 -4.163E-17
service)
59 0.00000 WINDY (In 0.0000 0.0000 0.0000
service)
59 0.14500 WINDY (In 0.0000 -4.025E-18 0.0000
service)
59 0.14500 WINDY (In 1.084E-19 -1.214E-17 7.773E-20
service)
59 0.75000 WINDY (In 1.084E-19 0.0149 -7.375E-15
service)
59 0.91000 WINDY (In 1.084E-19 0.0188 -9.325E-15
service)

LG Page 36 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

59 0.91000 WINDY (In 2.168E-19 0.0188 -9.325E-15

service)
59 1.14500 WINDY (In 2.168E-19 -0.0582 1.444E-13
service)
59 1.14500 WINDY (In 0.0000 -0.0582 -1.537E-13
service)
59 1.38000 WINDY (In 0.0000 2.082E-17 0.0000
service)
59 1.38000 WINDY (In 0.0000 2.776E-17 0.0000
service)
59 1.50000 WINDY (In 0.0000 4.108E-17 0.0000
service)
59 0.00000 WINDZ (In 0.0000 0.0000 0.0000
service)
59 0.14500 WINDZ (In 0.0000 -8.049E-18 0.0000
service)
59 0.14500 WINDZ (In 2.168E-19 -2.082E-17 1.624E-19
service)
59 0.75000 WINDZ (In 2.168E-19 0.0268 2.151E-07
service)
59 0.91000 WINDZ (In 2.168E-19 0.0339 2.720E-07
service)
59 0.91000 WINDZ (In 2.168E-19 0.0339 2.720E-07
service)
59 1.14500 WINDZ (In 2.168E-19 -0.1047 -4.211E-06
service)
59 1.14500 WINDZ (In 0.0000 -0.1047 4.483E-06
service)
59 1.38000 WINDZ (In 0.0000 2.776E-17 0.0000
service)
59 1.38000 WINDZ (In 0.0000 5.551E-17 0.0000
service)
59 1.50000 WINDZ (In 0.0000 5.551E-17 0.0000
service)
59 0.00000 WINDX (Out of 0.0000 0.0000 0.0000
service)
59 0.14500 WINDX (Out of 0.0000 0.0000 0.0032
service)
59 0.14500 WINDX (Out of 2.220E-16 -4.857E-17 0.0032
service)
59 0.75000 WINDX (Out of 2.220E-16 0.0534 -0.0152
service)
59 0.91000 WINDX (Out of 2.220E-16 0.0676 -0.0017
service)
59 0.91000 WINDX (Out of 4.441E-16 0.0676 -0.0017
service)
59 1.14500 WINDX (Out of 4.441E-16 -0.2089 0.0607
service)
59 1.14500 WINDX (Out of 4.441E-16 -0.2089 0.0384
service)
59 1.38000 WINDX (Out of 4.441E-16 5.551E-17 0.0022
service)
59 1.38000 WINDX (Out of 0.0000 1.110E-16 0.0022
service)
59 1.50000 WINDX (Out of 0.0000 5.773E-17 -2.255E-17
service)
59 0.00000 WINDY (Out of 0.0000 0.0000 0.0000
service)
59 0.14500 WINDY (Out of 0.0000 0.0032 2.515E-19
service)
59 0.14500 WINDY (Out of -5.551E-17 0.0032 -3.957E-17
service)

LG Page 37 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

59 0.75000 WINDY (Out of -5.551E-17 0.0316 -8.279E-04

service)
59 0.91000 WINDY (Out of -5.551E-17 0.0575 -0.0010
service)
59 0.91000 WINDY (Out of -1.110E-16 0.0575 -0.0010
service)
59 1.14500 WINDY (Out of -1.110E-16 -0.1308 0.0162
service)
59 1.14500 WINDY (Out of 0.0000 -0.1308 -0.0173
service)
59 1.38000 WINDY (Out of 0.0000 0.0022 3.469E-18
service)
59 1.38000 WINDY (Out of 0.0000 0.0022 1.735E-18
service)
59 1.50000 WINDY (Out of 0.0000 4.597E-17 3.400E-18
service)
59 0.00000 WINDZ (Out of 0.0000 0.0000 0.0000
service)
59 0.14500 WINDZ (Out of 0.0000 0.0000 0.0000
service)
59 0.14500 WINDZ (Out of -4.163E-17 -3.469E-17 -3.057E-17
service)
59 0.75000 WINDZ (Out of -4.163E-17 0.0435 -5.924E-04
service)
59 0.91000 WINDZ (Out of -4.163E-17 0.0549 -7.491E-04
service)
59 0.91000 WINDZ (Out of -2.776E-17 0.0549 -7.491E-04
service)
59 1.14500 WINDZ (Out of -2.776E-17 -0.1699 0.0116
service)
59 1.14500 WINDZ (Out of -2.776E-17 -0.1699 -0.0123
service)
59 1.38000 WINDZ (Out of -2.776E-17 2.776E-17 3.469E-18
service)
59 1.38000 WINDZ (Out of 0.0000 5.551E-17 1.735E-18
service)
59 1.50000 WINDZ (Out of 0.0000 5.551E-17 1.735E-18
service)
62 0.00000 DEAD 3.253E-18 0.0000 0.0000
62 0.94340 DEAD 3.253E-18 0.0000 0.0576
62 1.88680 DEAD 3.253E-18 0.0000 -2.776E-17
62 0.00000 IMPSOED -5.421E-19 0.0000 0.0000
62 0.94340 IMPSOED -5.421E-19 0.0000 0.0000
62 1.88680 IMPSOED -5.421E-19 0.0000 0.0000
62 0.00000 WINDX (In -2.220E-16 0.0000 0.0000
service)
62 0.94340 WINDX (In -2.220E-16 0.0000 0.0000
service)
62 1.88680 WINDX (In -2.220E-16 0.0000 0.0000
service)
62 0.00000 WINDY (In -4.743E-20 0.0000 0.0000
service)
62 0.94340 WINDY (In -4.743E-20 0.0000 0.0000
service)
62 1.88680 WINDY (In -4.743E-20 0.0000 0.0000
service)
62 0.00000 WINDZ (In -9.487E-20 0.0000 0.0000
service)
62 0.94340 WINDZ (In -9.487E-20 0.0000 0.0000
service)
62 1.88680 WINDZ (In -9.487E-20 0.0000 0.0000
service)

LG Page 38 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

62 0.00000 WINDX (Out of -2.498E-16 0.0000 0.0000

service)
62 0.94340 WINDX (Out of -2.498E-16 -0.1335 0.0000
service)
62 1.88680 WINDX (Out of -2.498E-16 -1.110E-16 0.0000
service)
62 0.00000 WINDY (Out of 4.857E-17 0.0000 0.0000
service)
62 0.94340 WINDY (Out of 4.857E-17 0.0000 0.0708
service)
62 1.88680 WINDY (Out of 4.857E-17 0.0000 -1.110E-16
service)
62 0.00000 WINDZ (Out of 3.296E-17 0.0000 0.0000
service)
62 0.94340 WINDZ (Out of 3.296E-17 0.0000 0.1132
service)
62 1.88680 WINDZ (Out of 3.296E-17 0.0000 2.220E-16
service)
70 0.00000 DEAD 0.0000 0.0000 0.0000
70 0.14500 DEAD 0.0000 0.0000 0.0000
70 0.14500 DEAD 8.674E-19 -1.041E-17 2.711E-19
70 0.75000 DEAD 8.674E-19 0.0179 5.846E-05
70 0.91000 DEAD 8.674E-19 0.0227 7.392E-05
70 0.91000 DEAD 0.0000 0.0227 7.392E-05
70 1.14500 DEAD 0.0000 -0.0702 -0.0011
70 1.14500 DEAD 1.735E-18 -0.0702 0.0012
70 1.38000 DEAD 1.735E-18 5.551E-17 0.0000
70 1.38000 DEAD 0.0000 2.776E-17 -1.084E-19
70 1.50000 DEAD 0.0000 2.776E-17 -1.084E-19
70 0.00000 IMPSOED 0.0000 0.0000 0.0000
70 0.14500 IMPSOED 0.0000 0.0000 0.0000
70 0.14500 IMPSOED 6.505E-19 -9.714E-17 4.893E-19
70 0.75000 IMPSOED 6.505E-19 0.1432 -1.150E-06
70 0.91000 IMPSOED 6.505E-19 0.1811 -1.455E-06
70 0.91000 IMPSOED 0.0000 0.1811 -1.455E-06
70 1.14500 IMPSOED 0.0000 -0.5598 2.252E-05
70 1.14500 IMPSOED 8.674E-19 -0.5598 -2.398E-05
70 1.38000 IMPSOED 8.674E-19 2.220E-16 1.863E-19
70 1.38000 IMPSOED 0.0000 2.220E-16 0.0000
70 1.50000 IMPSOED 0.0000 2.220E-16 0.0000
70 0.00000 WINDX (In 0.0000 0.0000 0.0000
service)
70 0.14500 WINDX (In 0.0000 0.0000 -1.610E-17
service)
70 0.14500 WINDX (In 2.082E-17 2.429E-17 0.0000
service)
70 0.75000 WINDX (In 2.082E-17 -0.0357 0.0446
service)
70 0.91000 WINDX (In 2.082E-17 -0.0452 0.0564
service)
70 0.91000 WINDX (In 2.776E-17 -0.0452 0.0564
service)
70 1.14500 WINDX (In 2.776E-17 0.1396 -0.1745
service)
70 1.14500 WINDX (In 0.0000 0.1396 -0.1745
service)
70 1.38000 WINDX (In 0.0000 -5.551E-17 1.943E-16
service)
70 1.38000 WINDX (In 0.0000 -5.551E-17 5.551E-17
service)

LG Page 39 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

70 1.50000 WINDX (In 0.0000 -1.088E-16 5.551E-17

service)
70 0.00000 WINDY (In 0.0000 0.0000 0.0000
service)
70 0.14500 WINDY (In 0.0000 -4.025E-18 0.0000
service)
70 0.14500 WINDY (In 8.132E-20 -1.041E-17 4.791E-20
service)
70 0.75000 WINDY (In 8.132E-20 0.0149 7.376E-15
service)
70 0.91000 WINDY (In 8.132E-20 0.0188 9.327E-15
service)
70 0.91000 WINDY (In 0.0000 0.0188 9.327E-15
service)
70 1.14500 WINDY (In 0.0000 -0.0582 -1.444E-13
service)
70 1.14500 WINDY (In 1.084E-19 -0.0582 1.537E-13
service)
70 1.38000 WINDY (In 1.084E-19 3.469E-17 4.898E-20
service)
70 1.38000 WINDY (In 0.0000 2.776E-17 0.0000
service)
70 1.50000 WINDY (In 0.0000 2.776E-17 0.0000
service)
70 0.00000 WINDZ (In 0.0000 0.0000 0.0000
service)
70 0.14500 WINDZ (In 0.0000 0.0000 0.0000
service)
70 0.14500 WINDZ (In 1.626E-19 -1.388E-17 4.447E-20
service)
70 0.75000 WINDZ (In 1.626E-19 0.0268 -2.151E-07
service)
70 0.91000 WINDZ (In 1.626E-19 0.0339 -2.720E-07
service)
70 0.91000 WINDZ (In 0.0000 0.0339 -2.720E-07
service)
70 1.14500 WINDZ (In 0.0000 -0.1047 4.211E-06
service)
70 1.14500 WINDZ (In 2.168E-19 -0.1047 -4.483E-06
service)
70 1.38000 WINDZ (In 2.168E-19 5.551E-17 1.855E-19
service)
70 1.38000 WINDZ (In 0.0000 5.551E-17 0.0000
service)
70 1.50000 WINDZ (In 0.0000 8.216E-17 0.0000
service)
70 0.00000 WINDX (Out of 0.0000 0.0000 0.0000
service)
70 0.14500 WINDX (Out of 0.0000 1.610E-17 0.0032
service)
70 0.14500 WINDX (Out of 8.674E-19 3.469E-17 0.0032
service)
70 0.75000 WINDX (Out of 8.674E-19 -0.0534 0.0795
service)
70 0.91000 WINDX (Out of 8.674E-19 -0.0676 0.1181
service)
70 0.91000 WINDX (Out of 1.735E-18 -0.0676 0.1181
service)
70 1.14500 WINDX (Out of 1.735E-18 0.2089 -0.3268
service)
70 1.14500 WINDX (Out of 0.0000 0.2089 -0.3045
service)

LG Page 40 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

70 1.38000 WINDX (Out of 0.0000 -2.498E-16 0.0022

service)
70 1.38000 WINDX (Out of 0.0000 -1.110E-16 0.0022
service)
70 1.50000 WINDX (Out of 0.0000 -1.110E-16 2.151E-16
service)
70 0.00000 WINDY (Out of 0.0000 0.0000 0.0000
service)
70 0.14500 WINDY (Out of 0.0000 0.0032 -2.515E-19
service)
70 0.14500 WINDY (Out of 1.041E-17 0.0032 3.795E-18
service)
70 0.75000 WINDY (Out of 1.041E-17 0.0327 8.279E-04
service)
70 0.91000 WINDY (Out of 1.041E-17 0.0589 0.0010
service)
70 0.91000 WINDY (Out of 1.388E-17 0.0589 0.0010
service)
70 1.14500 WINDY (Out of 1.388E-17 -0.1353 -0.0162
service)
70 1.14500 WINDY (Out of 0.0000 -0.1353 0.0173
service)
70 1.38000 WINDY (Out of 0.0000 0.0022 -3.469E-18
service)
70 1.38000 WINDY (Out of 0.0000 0.0022 -1.735E-18
service)
70 1.50000 WINDY (Out of 0.0000 7.373E-17 -1.735E-18
service)
70 0.00000 WINDZ (Out of 0.0000 0.0000 0.0000
service)
70 0.14500 WINDZ (Out of 0.0000 -1.610E-17 0.0000
service)
70 0.14500 WINDZ (Out of 6.939E-18 -2.082E-17 2.114E-18
service)
70 0.75000 WINDZ (Out of 6.939E-18 0.0373 5.924E-04
service)
70 0.91000 WINDZ (Out of 6.939E-18 0.0471 7.491E-04
service)
70 0.91000 WINDZ (Out of 0.0000 0.0471 7.491E-04
service)
70 1.14500 WINDZ (Out of 0.0000 -0.1457 -0.0116
service)
70 1.14500 WINDZ (Out of 6.939E-18 -0.1457 0.0123
service)
70 1.38000 WINDZ (Out of 6.939E-18 2.776E-17 -1.735E-18
service)
70 1.38000 WINDZ (Out of 0.0000 5.551E-17 -1.735E-18
service)
70 1.50000 WINDZ (Out of 0.0000 5.551E-17 -2.567E-18
service)
71 0.00000 DEAD -3.253E-19 0.0000 0.0000
71 0.94340 DEAD -3.253E-19 0.0000 0.0576
71 1.88680 DEAD -3.253E-19 0.0000 -2.776E-17
71 0.00000 IMPSOED -5.421E-20 0.0000 0.0000
71 0.94340 IMPSOED -5.421E-20 0.0000 0.0000
71 1.88680 IMPSOED -5.421E-20 0.0000 0.0000
71 0.00000 WINDX (In -5.204E-18 0.0000 0.0000
service)
71 0.94340 WINDX (In -5.204E-18 0.0000 0.0000
service)
71 1.88680 WINDX (In -5.204E-18 0.0000 0.0000
service)

LG Page 41 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

71 0.00000 WINDY (In 0.0000 0.0000 0.0000

service)
71 0.94340 WINDY (In 0.0000 0.0000 0.0000
service)
71 1.88680 WINDY (In 0.0000 0.0000 0.0000
service)
71 0.00000 WINDZ (In 5.421E-20 0.0000 0.0000
service)
71 0.94340 WINDZ (In 5.421E-20 0.0000 0.0000
service)
71 1.88680 WINDZ (In 5.421E-20 0.0000 0.0000
service)
71 0.00000 WINDX (Out of 7.850E-17 0.0000 0.0000
service)
71 0.94340 WINDX (Out of 7.850E-17 -0.1335 0.0000
service)
71 1.88680 WINDX (Out of 7.850E-17 -1.110E-16 0.0000
service)
71 0.00000 WINDY (Out of -6.072E-18 0.0000 0.0000
service)
71 0.94340 WINDY (Out of -6.072E-18 0.0000 0.0708
service)
71 1.88680 WINDY (Out of -6.072E-18 0.0000 -1.110E-16
service)
71 0.00000 WINDZ (Out of -3.469E-18 0.0000 0.0000
service)
71 0.94340 WINDZ (Out of -3.469E-18 0.0000 0.1132
service)
71 1.88680 WINDZ (Out of -3.469E-18 0.0000 2.220E-16
service)
74 0.00000 DEAD 0.0000 0.0000 0.0000
74 0.37500 DEAD 0.0000 -6.505E-19 0.0322
74 0.75000 DEAD 0.0000 -1.301E-18 0.0430
74 0.75000 DEAD 0.0000 1.735E-18 0.0430
74 1.12500 DEAD 0.0000 4.337E-19 0.0322
74 1.50000 DEAD 0.0000 -8.674E-19 2.082E-17
74 0.00000 IMPSOED 0.0000 0.0000 0.0000
74 0.37500 IMPSOED 0.0000 -2.082E-17 1.1531
74 0.75000 IMPSOED 0.0000 -4.163E-17 2.3062
74 0.75000 IMPSOED 0.0000 -1.388E-17 2.3062
74 1.12500 IMPSOED 0.0000 -8.674E-18 1.1531
74 1.50000 IMPSOED 0.0000 -3.469E-18 4.441E-16
74 0.00000 WINDX (In 0.0000 0.0000 0.0000
service)
74 0.37500 WINDX (In 0.0000 2.602E-18 5.204E-18
service)
74 0.75000 WINDX (In 0.0000 5.204E-18 1.041E-17
service)
74 0.75000 WINDX (In 0.0000 -1.388E-17 -2.082E-17
service)
74 1.12500 WINDX (In 0.0000 -6.072E-18 -7.806E-18
service)
74 1.50000 WINDX (In 0.0000 1.735E-18 5.204E-18
service)
74 0.00000 WINDY (In 0.0000 0.0000 0.0000
service)
74 0.37500 WINDY (In 0.0000 0.2156 1.301E-18
service)
74 0.75000 WINDY (In 0.0000 0.4312 2.602E-18
service)
74 0.75000 WINDY (In 0.0000 0.4312 0.0000
service)

LG Page 42 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

74 1.12500 WINDY (In 0.0000 0.2156 0.0000

service)
74 1.50000 WINDY (In 0.0000 5.551E-17 0.0000
service)
74 0.00000 WINDZ (In 0.0000 0.0000 0.0000
service)
74 0.37500 WINDZ (In 0.0000 -2.602E-18 0.2156
service)
74 0.75000 WINDZ (In 0.0000 -5.204E-18 0.4312
service)
74 0.75000 WINDZ (In 0.0000 0.0000 0.4312
service)
74 1.12500 WINDZ (In 0.0000 -1.301E-18 0.2156
service)
74 1.50000 WINDZ (In 0.0000 -2.602E-18 1.665E-16
service)
74 0.00000 WINDX (Out of 0.0000 0.0000 0.0000
service)
74 0.37500 WINDX (Out of 0.0000 0.0000 5.204E-18
service)
74 0.75000 WINDX (Out of 0.0000 0.0000 1.041E-17
service)
74 0.75000 WINDX (Out of 0.0000 -3.469E-18 -6.939E-18
service)
74 1.12500 WINDX (Out of 0.0000 1.735E-18 -1.735E-18
service)
74 1.50000 WINDX (Out of 0.0000 6.939E-18 3.469E-18
service)
74 0.00000 WINDY (Out of 0.0000 0.0000 0.0000
service)
74 0.37500 WINDY (Out of 0.0000 0.0633 -2.602E-18
service)
74 0.75000 WINDY (Out of 0.0000 0.0844 -5.204E-18
service)
74 0.75000 WINDY (Out of 0.0000 0.0844 0.0000
service)
74 1.12500 WINDY (Out of 0.0000 0.0633 -2.602E-18
service)
74 1.50000 WINDY (Out of 0.0000 3.123E-17 -5.204E-18
service)
74 0.00000 WINDZ (Out of 0.0000 0.0000 0.0000
service)
74 0.37500 WINDZ (Out of 0.0000 2.602E-18 0.0633
service)
74 0.75000 WINDZ (Out of 0.0000 5.204E-18 0.0844
service)
74 0.75000 WINDZ (Out of 0.0000 3.469E-18 0.0844
service)
74 1.12500 WINDZ (Out of 0.0000 8.674E-19 0.0633
service)
74 1.50000 WINDZ (Out of 0.0000 -1.735E-18 3.816E-17
service)
76 0.00000 DEAD 2.854E-04 0.0000 -0.0028
76 0.45069 DEAD 1.386E-04 2.345E-18 0.0062
76 0.90139 DEAD -8.200E-06 4.691E-18 0.0092
76 1.35208 DEAD -1.550E-04 7.036E-18 0.0062
76 1.80278 DEAD -3.018E-04 9.382E-18 -0.0028
76 0.00000 IMPSOED 8.382E-05 0.0000 0.0000
76 0.45069 IMPSOED 8.382E-05 0.0000 0.0000
76 0.90139 IMPSOED 8.382E-05 0.0000 0.0000
76 1.35208 IMPSOED 8.382E-05 0.0000 0.0000
76 1.80278 IMPSOED 8.382E-05 0.0000 0.0000

LG Page 43 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

76 0.00000 WINDX (In 1.764E-06 0.0000 0.0000

service)
76 0.45069 WINDX (In 1.764E-06 0.0000 0.0000
service)
76 0.90139 WINDX (In 1.764E-06 0.0000 0.0000
service)
76 1.35208 WINDX (In 1.764E-06 0.0000 0.0000
service)
76 1.80278 WINDX (In 1.764E-06 0.0000 0.0000
service)
76 0.00000 WINDY (In -5.373E-13 0.0000 0.0000
service)
76 0.45069 WINDY (In -5.373E-13 0.0000 0.0000
service)
76 0.90139 WINDY (In -5.373E-13 0.0000 0.0000
service)
76 1.35208 WINDY (In -5.373E-13 0.0000 0.0000
service)
76 1.80278 WINDY (In -5.373E-13 0.0000 0.0000
service)
76 0.00000 WINDZ (In 1.567E-05 0.0000 0.0000
service)
76 0.45069 WINDZ (In 1.567E-05 0.0000 0.0000
service)
76 0.90139 WINDZ (In 1.567E-05 0.0000 0.0000
service)
76 1.35208 WINDZ (In 1.567E-05 0.0000 0.0000
service)
76 1.80278 WINDZ (In 1.567E-05 0.0000 0.0000
service)
76 0.00000 WINDX (Out of 1.204E-05 0.0000 -0.0268
service)
76 0.45069 WINDX (Out of 1.204E-05 -0.0507 -0.0268
service)
76 0.90139 WINDX (Out of 1.204E-05 -0.0676 -0.0268
service)
76 1.35208 WINDX (Out of 1.204E-05 -0.0507 -0.0268
service)
76 1.80278 WINDX (Out of 1.204E-05 -2.498E-16 -0.0268
service)
76 0.00000 WINDY (Out of 1.414E-05 0.0000 -0.0402
service)
76 0.45069 WINDY (Out of 1.414E-05 -0.0761 -0.0402
service)
76 0.90139 WINDY (Out of 1.414E-05 -0.1014 -0.0402
service)
76 1.35208 WINDY (Out of 1.414E-05 -0.0761 -0.0402
service)
76 1.80278 WINDY (Out of 1.414E-05 -5.551E-17 -0.0402
service)
76 0.00000 WINDZ (Out of 0.0030 0.0000 -0.0288
service)
76 0.45069 WINDZ (Out of 0.0015 -6.880E-17 0.0626
service)
76 0.90139 WINDZ (Out of -1.735E-05 -1.376E-16 0.0931
service)
76 1.35208 WINDZ (Out of -0.0015 -2.064E-16 0.0626
service)
76 1.80278 WINDZ (Out of -0.0030 -2.752E-16 -0.0288
service)

LG Page 44 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

10. Material take-off

This section provides a material take-off.

Table 21: Material List 2 - By Section Property

Table 21: Material List 2 - By Section Property
Section ObjectType NumPieces TotalLength TotalWeight
m KN
50x50x4mm EA Frame 1 1.80278 0.053
70x70x8mm Frame 7 11.87359 1.813
S.H.S.

11. Design preferences

This section provides the design preferences for each type of design, which typically include material reduction factors,
framing type, stress ratio limit, deflection limits, and other code specific items.

11.1. Steel design

Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 1 of 3

Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 1 of 3
FrameType PatLLF SRatioLimit Country CombosEq RelClass KFactorMethod

DCH-MRF 0.750000 0.950000 CEN Default Eq. 6.10 Class 2 Method 2 (Annex
B)

Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 2 of 3

Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 2 of 3
GammaM0 GammaM1 GammaM2 SeisCode SeisLoad PlugWeld q Omega DLRat

1.000000 1.000000 1.250000 Yes Yes Yes 4.000000 1.000000 120.000000

Table 22: Preferences - Steel Design - Eurocode 3-2005, Part 3 of 3

Table 22: Preferences - Steel Design - Eurocode 3-2005, Part
3 of 3
SDLAndLLRat LLRat TotalRat NetRat

120.000000 360.000000 240.000000 240.000000

11.2. Aluminum design

LG Page 45 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Table 23: Preferences - Aluminum Design - AA-ASD 2000

Table 23: Preferences - Aluminum Design - AA-ASD 2000
FrameType SRatioLimit LatFact UseLatFact

Moment Frame 1.000000 1.333333 No

11.3. Cold formed design

Table 24: Preferences - Cold Formed Design - AISI-ASD96

Table 24: Preferences - Cold Formed Design - AISI-ASD96
FrameType SRatioLim OmegaBS OmegaBU OmegaBL OmegaVS OmegaVN OmegaT OmegaC
it S TB S

Braced Frame 1.000000 1.670000 1.670000 1.670000 1.670000 1.500000 1.670000 1.800000

12. Design overwrites

This section provides the design overwrites for each type of design, which are assigned to individual members of the
structure.

12.1. Steel design

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 1 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 1 of 8
Frame DesignSect FrameType Fy RLLF AreaRatio XLMajor XLMinor
KN/m2
59 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
62 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
70 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
71 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
74 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
76 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
1 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined
2 Program Program 0.00 0.000000 0.000000 0.000000 0.000000
Determined Determined

LG Page 46 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 2 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 2 of 8
Frame XLLTB K1Major DeflType K1Minor DLRat K2Major SDLAndLLRat K2Minor

59 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000

Determined
62 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined
70 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined
71 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined
74 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined
76 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined
1 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined
2 0.000000 0.000000 Program 0.000000 0.000000 0.000000 0.000000 0.000000
Determined

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 3 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 3 of 8
Frame LLRat KLTB TotalRat kyyMajor NetRat

59 0.000000 0.000000 0.000000 0.000000 0.000000

62 0.000000 0.000000 0.000000 0.000000 0.000000
70 0.000000 0.000000 0.000000 0.000000 0.000000
71 0.000000 0.000000 0.000000 0.000000 0.000000
74 0.000000 0.000000 0.000000 0.000000 0.000000
76 0.000000 0.000000 0.000000 0.000000 0.000000
1 0.000000 0.000000 0.000000 0.000000 0.000000
2 0.000000 0.000000 0.000000 0.000000 0.000000

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 4 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 4 of 8
Frame kzzMinor DLAbs SDLAndLLAbs LLAbs TotalAbs SectClass NetAbs
m m m m m
59 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
62 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
70 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
71 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
74 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
76 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
1 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000
2 0.000000 0.000000 0.000000 0.000000 0.000000 Program Determined 0.000000

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 5 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 5 of 8
Frame Rolled SpecCambe DCLimit CurveYY CurveZZ CurveLTB
r
m
59 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined

LG Page 47 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

62 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined

70 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined
71 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined
74 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined
76 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined
1 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined
2 Yes 0.000000 0.000000 Program Determined Program Determined Program Determined

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 6 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005,
Part 6 of 8
Frame C1 kzy kyz

59 0.000000 0.000000 0.000000

62 0.000000 0.000000 0.000000
70 0.000000 0.000000 0.000000
71 0.000000 0.000000 0.000000
74 0.000000 0.000000 0.000000
76 0.000000 0.000000 0.000000
1 0.000000 0.000000 0.000000
2 0.000000 0.000000 0.000000

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 7 of 8

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 7 of 8
Frame Omega GammaOV Nc Nt Mc3 Mc2 Mb V2
KN KN KN-m KN-m KN-m KN
59 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
62 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
70 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
71 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
74 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
76 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
1 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000
2 0.000000 0.000000 0.000 0.000 0.0000 0.0000 0.0000 0.000

Table 25: Overwrites - Steel Design - Eurocode 3-2005, Part 8 of 8

Table 25: Overwrites -
Steel Design - Eurocode 3-
2005, Part 8 of 8
Frame V3
KN
59 0.000
62 0.000
70 0.000
71 0.000
74 0.000
76 0.000
1 0.000
2 0.000

LG Page 48 of 49
Steel Truss_2.sdb SAP2000 v16.0.2
1. Model geometry 20 July 2024

13. Design summary

This section provides the design summary for each type of design, which highlights the controlling demand/capacity ratio
and it's associated combination and location in each member.

13.1. Steel design

Table 26: Steel Design 1 - Summary Data - Eurocode 3-2005, Part 1 of 2

Table 26: Steel Design 1 - Summary Data - Eurocode 3-2005, Part 1 of 2
Frame Location Combo DesignSect DesignType Ratio RatioType
m
59 0.14500 2.0(DL+LL+WL) 70x70x8mm Column 0.152139 PMM
S.H.S.
62 0.00000 2.0(DL+LL+WL) 70x70x8mm Brace 0.059324 PMM
S.H.S.
70 0.14500 2.0(DL+LL+WL) 70x70x8mm Column 0.118942 PMM
S.H.S.
71 0.00000 2.0(DL+LL+WL) 70x70x8mm Brace 0.059163 PMM
S.H.S.
74 0.00000 2.0(DL+LL+WL) 70x70x8mm Beam 0.476528 PMM
S.H.S.
76 0.00000 1.4DL+1.4WL 50x50x4mm EA Beam 0.857211 PMM
1 0.00000 2.0(DL+LL+WL) 70x70x8mm Beam 0.188852 PMM
S.H.S.
2 0.00000 2.0(DL+LL+WL) 70x70x8mm Beam 0.167215 PMM
S.H.S.

Table 26: Steel Design 1 - Summary Data - Eurocode 3-2005, Part 2 of 2

Table 26: Steel Design 1 - Summary Data - Eurocode 3-2005, Part 2 of 2
Frame Status ErrMsg WarnMsg

59 No Messages No Messages No Messages

62 No Messages No Messages No Messages
70 No Messages No Messages No Messages
71 No Messages No Messages No Messages
74 No Messages No Messages No Messages
76 No Messages No Messages No Messages
1 No Messages No Messages No Messages
2 No Messages No Messages No Messages

LG Page 49 of 49