JC International Limited: Defect / Non Compliance Report
Uploaded by
Michael OkwuwaJC International Limited: Defect / Non Compliance Report
Uploaded by
Michael OkwuwaJCI
JC International Limited RC 413243
Plot 5 JC Street, Off Peter Odili Road, Trans Amadi, P.O. Box 6427 Trans Amadi Port Harcourt TEL: 234-084-489909, 08033108342, E-mail: [email protected] Website: www.jcinternationalng.com
DEFECT / NON COMPLIANCE REPORT
Certificate No. Date of Examination Examiner Qualifications
1883 Identification Number
15/07/11 Description of Equipment:
SIMON OGBAN
SNT LEVEL II (MT, PT & UT)
10.3/4 9.5/8 CASING BOWL (BUSHING)
154787.0
METHOD: All Accessible Load Bearing Areas were cleaned to bare metal and inspected based on the specification and the test procedure stipulated below for surface breaking defects RESULTS: Crack was found at the base as at the time of inspection.
SPECIFICATION : BS MPI METHOD: RESULTS:
EN ISO 9934-1:2001, API RP 8B
TEST PROCEDURE:
JOP-020
Wet Visible Crack was found at the base.
MAGNETIC FIELD INDICATOR: BURMAH CASTROL STRIP ILLUMINATION: 1000 LUX TEST TEMPERATURE: 28 DEGREE CELSIUS.
MATERIAL: Carbon steel. EQUIPMENT USED: Permanent Magnet. SERIAL NO. : A706 TEST WEIGHT: 40 LBS Contrast Media: White contrast paint Indicator: Black magnetic ink
Name and address of equipment owner:
Address of premises where Test / Examination was held:
KCA DEUTAG
KCA DEUTAG STACKING AREA (T 41) SIMON OGBAN
We hereby certify that on 15/07/11 (date) defect was found on the item/s described on this Certificate as at the time of inspection. Signature of Inspector: Name of Inspector:
Cert No.227173
JCI
JC International Limited RC 413243
Plot 5 JC Street, Off Peter Odili Road, Trans Amadi, P.O. Box 6427 Trans Amadi Port Harcourt TEL: 234-084-489909, 08033108342, E-mail: [email protected] Website: www.jcinternationalng.com
DEFECT / NON COMPLIANCE REPORT
Certificate No. Date of Examination Examiner Qualifications
1898 Identification Number
26/07/11
SIMON OGBAN
SNT LEVEL II (MT, PT & UT)
Description of Equipment: 2.7/8
TUBING CENTER ELEVATOR
DIMENSIONS
E672 (031471095) (087805.7)
Right Ear: 3.5/8 Left Ear: 3.5/8 Top Bore: N/A Middle Bore: N/A Bottom Bore: N/A Hinge Gap dia.: 1/4 Door Gap dia.: 2/32
SPRING CONDITION- OK
SHOULDER CONDITION- OK MANUFACTURER: BJ YT
METHOD: All Accessible Load Bearing Areas were cleaned to bare metal and inspected based on the specification and the test procedure stipulated below for surface breaking defects RESULTS: Crack was found on the handle as at the time of inspection.
SPECIFICATION : BS MPI METHOD: RESULTS:
EN ISO 9934-1:2001, API RP8B
TEST PROCEDURE:
JOP-020
Wet Visible Crack was found at the Handle.
MAGNETIC FIELD INDICATOR: BURMAH CASTROL STRIP ILLUMINATION: 1000 LUX TEST TEMPERATURE: 28 DEGREE CELSIUS.
MATERIAL: Carbon steel. EQUIPMENT USED: Permanent Magnet. SERIAL NO. : A706 TEST WEIGHT: 40 LBS Contrast Media: White contrast paint Indicator: Black magnetic ink
Name and address of equipment owner:
Address of premises where Test / Examination was held:
KCA DEUTAG
KCA DEUTAG STACKING AREA (T 41) SIMON OGBAN
We hereby certify that on 26/07/11 (date) defect was found on the item/s described on this Certificate as at the time of inspection. Signature of Inspector: Name of Inspector:
Cert No.227173
