A330 Demagnatized

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

JOB CARD PACKAGE TITLE: LYX -

Demagnatized Tail Number - MSN -


FSN
ALL

MPD Reference Title DocType

Demagnetization of the External Parts of the


NONE 05-54-00-860-801-A AMM
Frames of the Windshield and Sliding Windows

Job Cards Package is made of: 1 job cards.

JCP Title: Demagnatized CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 2


PRINT DATE: Sep 12/2024
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
JOB CARD PACKAGE TITLE: LYX -
Demagnatized Tail Number - MSN -
FSN
ALL

INTENTIONALLY LEFT BLANK

JCP Title: Demagnatized CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 2


PRINT DATE: Sep 12/2024
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
JOB CARD REV DATE: Jul 01/2024
AMM - LYX - A330 TASK:
05-54-00-860-801-A
05-54-00-02 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 05-54-00-860-801-A - Demagnetization of the External Parts NONE
ALL of the Frames of the Windshield and Sliding Windows

MECH. INSP.

** ON A/C FSN ALL


TASK 05-54-00-860-801-A
Demagnetization of the External Parts of the Frames of the Windshield and Sliding
Windows
1. Reason for the Job
The demagnetization procedure is applicable to the external parts of the
frames of the windshield and sliding windows.
Use this procedure if you are sure that incorrect deviation of the standby
compass occurs after adjustment on the compensation base.

2. Job Set-up Information

A. Fixtures, Tools, Test and Support Equipment

REFERENCE QTY DESIGNATION


DM05275A 1 DEMAGNETIZER - 110V/60HZ
DM05275B 1 DEMAGNETIZER - 220V/50HZ
MGM50 1 GAUSSMETER
SAV890-71 1 DEMAGNETIZER-230V 50HZ

B. Referenced Information

REFERENCE DESIGNATION
Ref. Compensation Adjustment of the Standby
34-22-00-730-801-A Compass
Ref. Compensation Adjustment of the Standby
34-22-00-730-801- Compass with a Standby Compass Calibrator
A01
Ref. Removal of the Standby Compass
34-22-23-000-801-A
Ref. Installation of the Standby Compass
34-22-23-400-801-A

JCP Title: Demagnatized CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 3


PRINT DATE: Sep 12/2024
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
JOB CARD REV DATE: Jul 01/2024
AMM - LYX - A330 TASK:
05-54-00-860-801-A
05-54-00-02 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 05-54-00-860-801-A - Demagnetization of the External Parts NONE
ALL of the Frames of the Windshield and Sliding Windows

MECH. INSP.

3. Job Set-up

SUBTASK 05-54-00-860-050-A
A. Aircraft Configuration
(1) Make sure that the A/C is not energized (batteries, engines or
external power supply).

SUBTASK 05-54-00-020-050-A
B. Removal of the Standby Compass
(1) Remove the standby compass Ref. AMM TASK
34-22-23-000-801 from the cockpit and keep it away from
magnetic sources.

4. Procedure

SUBTASK 05-54-00-280-050-A
A. Find the Magnetic Zones:
(1) Obey the instructions from the manufacturer for the
GAUSSMETER (MGM50).
(2) Make sure that the Gaussmeter operates correctly:
- the pointer must move when you put the instrument
near the shaft of the windshield wiper motors.

(3) With the Gaussmeter, find the magnetic zones of the external
parts of the frames of the windshield and sliding windows.
Record the value for each zone.

NOTE: Ignore the magnetization on the shaft of the


windshield wiper motors.

SUBTASK 05-54-00-869-050-A
B. Demagnetize:
(1) Obey the instructions from the manufacturer for the
DEMAGNETIZER - 110V/60HZ (DM05275A),

JCP Title: Demagnatized CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 3


PRINT DATE: Sep 12/2024
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
JOB CARD REV DATE: Jul 01/2024
AMM - LYX - A330 TASK:
05-54-00-860-801-A
05-54-00-02 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 05-54-00-860-801-A - Demagnetization of the External Parts NONE
ALL of the Frames of the Windshield and Sliding Windows

MECH. INSP.

DEMAGNETIZER - 220V/50HZ (DM05275B) or the


DEMAGNETIZER-230V 50HZ (SAV890-71)
(2) Energize the demagnetizer.
(3) Put the demagnetizer at a very small distance (1 cm approx.)
from the part it is necessary to demagnetize. This position
gives the reference plane.
(4) Push the power supply button (indicator light on) and keep the
demagnetizer above the magnetic zone during 2 to 3 seconds.
Then move the demagnetizer away slowly at a constant speed
and at right angles to the reference plane. You must move the
demagnetizer to a minimum distance of 50 cm approx. before
you release the button.
(5) Do the step (4) again for each zone that you must
demagnetize.
(6) De-energize the demagnetizer.
(7) For each demagnetized zone, read the value shown on the
Gaussmeter. Make sure that this value is near zero.
(8) If you find zones that are not fully demagnetized, do again the
step (4) until the value read on the Gaussmeter is near zero.

5. Close-up

SUBTASK 05-54-00-420-050-A
A. Installation of the Standby Compass
(1) Install the standby compass Ref. AMM TASK
34-22-23-400-801.

SUBTASK 05-54-00-730-050-A
B. Compensation of the Standby Compass
(1) Do the compensation of the standby compass Ref. AMM TASK
34-22-00-730-801.

© *** END OF CARD ***

JCP Title: Demagnatized CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 3


PRINT DATE: Sep 12/2024
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE

You might also like