Cpe334 Energy Conservation and Management
Uploaded by
Pavithran RajaCpe334 Energy Conservation and Management
Uploaded by
Pavithran RajaCPE334 ENERGY CONSERVATION AND MANAGEMENT LTPC
3003
OBJECTIVES:
At the end of the course, the student is expected to .
understand and analyse the energy data of industries .
carryout energy accounting and balancing.
conduct energy audit and suggest methodologies for energy savings and
utilise the available resources in optimal ways
UNIT I INTRODUCTION 9
Energy - Power – Past & Present scenario of World; National Energy consumption Data –
Environmental aspects associated with energy utilization – Energy Auditing: Need, Types,
Methodology and Barriers. Role of Energy Managers. Instruments for energy auditing.
UNIT II ELECTRICAL SYSTEMS 9
Components of EB billing – HT and LT supply, Transformers, Cable Sizing, Concept of
Capacitors, Power Factor Improvement, Harmonics, Electric Motors - Motor Efficiency
Computation, Energy Efficient Motors, Illumination – Lux, Lumens, Types of lighting,
Efficacy, LED Lighting and scope of Encon in Illumination.
UNIT III THERMAL SYSTEMS 9
Stoichiometry, Boilers, Furnaces and Thermic Fluid Heaters – Efficiency computation and
encon measures. Steam: Distribution &U sage: Steam Traps, Condensate Recovery, Flash
Steam Utilization, Insulators & Refractories
UNIT IV ENERGY CONSERVATION IN MAJOR UTILITIES 9
Pumps, Fans, Blowers, Compressed Air Systems, Refrigeration and Air Conditioning
Systems –Cooling Towers – D.G. sets
UNIT V ECONOMICS 9
Energy Economics – Discount Rate, Payback Period, Internal Rate of Return, Net Present
Value, Life Cycle Costing –ESCO concept
TOTAL: 45 PERIODS
OUTCOMES:
Upon completion of this course, the students can able to analyze the energy data of
industries.
CO1: Remember the knowledge for Basic combustion and furnace design and
selection of thermal and mechanical energy equipment.
CO2: Study the Importance of Stoichiometry relations, Theoretical air required for
complete combustion.
CO3: Skills on combustion thermodynamics and kinetics.
CO4: Apply calculation and design tube still heaters. CO5: Studied different heat treatment furnace.
CO6: Practical and theoretical knowledge burner design.
TEXT BOOKS:
1. Energy Manager Training Manual (4 Volumes) available at
www.energymanagertraining.com. a website administered by Bureau of Energy
Efficiency (BEE), a statutory body under Ministry of Power, Government of India, 2004.
REFERENCES:
1. Witte. L.C., P.S. Schmidt, D.R. Brown, “Industrial Energy Management and
Utilisation” Hemisphere Publ, Washington, 1988.
2. Callaghn, P.W. “Design and Management for Energy Conservation”, Pergamon
Press, Oxford, 1981.
3. Dryden. I.G.C., “The Efficient Use of Energy” Butterworths, London, 1982
4. Turner. W.C., “Energy Management Hand book”, Wiley, New York, 1982.
5. Murphy. W.R. and G. Mc KAY, “Energy Management”, Butterworths, London 1987
