Assignment-1
Total Marks -10
Instruc ons:
1. Design a circuit using Mul sim so ware and run a simula on.
2. Capture screenshots of the simula on results.
3. Insert each screenshot into an Excel file as follows:
Sheet 2: Qn-1
Sheet 3: Qn-2
Sheet 4: Qn-3
4. On Sheet 1, include your name, registra on number, and batch number, Assignment number.
Ques ons: Total 3 Ques ons are framed and all ques ons are compulsory
Due date: 16-09-2024 (10 Days)
Qn-1
Consider the following condi ons to start the Igni on of electric scooter
Inputs
a. Proper key should be inserted
b. Correct password to be entered
c. Side stand should be OFF
d. Any one riding mode should be selected either Economy or Sports
e. Ba ery charge should be at least 10%
f. Igni on bu on Should be on
Output
a. Output should be high (For Igni on) if all the above condi ons are sa sfied
References for inputs
Sl No Condi ons Status
Proper key inserted 1
1
Improper key inserted 0
Correct password entered 1
2
Incorrect password entered 0
Side stand ON 1
3
Side stand OFF 0
Economy riding mode 1
4
Sports mode 1
Ba ery charge >10% 1
5
Ba ery charge <10% 0
Igni on bu on ON 1
6
Igni on bu on OFF 0
Qn-2
Consider the following condi ons to Protect the power transformer by overhea ng/Damage
Inputs
a. Oil temperature should not cross the threshold
b. Winding temperature should not cross the threshold
c. Current Should not cross the 60% threshold
d. Current Should not cross the 80% threshold
e. Current Should not cross the 85% threshold
f. Current Should not cross the 90% threshold
Outputs
a. Turn ON cooling system-1
Condi ons: 1. Oil temperature threshold crossed
2. Load current is > 60%
b. Turn ON cooling system-2
Condi ons: 1. Winding temperature threshold crossed
2. Load current > 80%
c. Trigger Alarm
Condi ons: 1. Oil temperature threshold crossed
2. Winding temperature threshold crossed
3. Load current > 85%
d. Trigger Shut down
Condi ons: 1. Oil temperature threshold crossed
2. Winding temperature threshold crossed
3. Load current > 90%
Sl No Condi ons Status
Oil temperature threshold crossed 1
1
Oil temperature threshold not crossed 0
Winding temperature threshold crossed 1
2
Winding temperature threshold not crossed 0
Load current > 60% 1
3
Load current < 60% 0
Load current > 80% 1
4
Load current < 80% 0
Load current > 85% 1
5
Load current < 85% 0
Load current > 90% 1
6
Load current < 90% 0
Qn-3
Simplify the below and simulate it by using basic gates
𝐴̅𝐵 𝐶̅ + 𝐴̅𝐵 𝐶 + 𝐴̅𝐵𝐶 + 𝐴𝐵𝐶
