Scribd
Upload
11 views

Exercise

Exercise

Uploaded by

brillantejohnlloyd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

Exercise

Exercise

Uploaded by

brillantejohnlloyd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

College of Information Technology

Unit III Activity

Screenshot the output of the following procedure


Submit the output in PDF format e.g. Juego_act3.pdf

Aim: Connect the computers in Local Area Network.

Procedure: On the host computer

On the host computer, follow these steps to share the Internet connection:
1. Log on to the host computer as Administrator or as Owner.
2. Click Start, and then click Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click the connection that you use to connect to the Internet. For example, if you
connect to the Internet by using a modem, right-click the connection that you want under Dial-up
/ other network available.
6. Click Properties.
7. Click the Advanced tab.

8. Under Internet Connection Sharing, select the Allow other network users to connect
through this computer's Internet connection check box.

9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection
whenever a computer on my network attempts to access the Internet check box if you
want to permit your computer to automatically connect to the Internet.

10. Click OK. You receive the following message:

When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP address
192.168.0. 1. Your computer may lose connectivity with other computers on your network. If
these other computers have static IP addresses, it is a good idea to set them to obtain their IP
addresses automatically. Are you sure you want to enable Internet Connection Sharing?

11. Click Yes.


The connection to the Internet is shared to other computers on the local area network (LAN).

The network adapter that is connected to the LAN is configured with a static IP address of
192.168.0. 1 and a subnet mask of 255.255.255.0

On the client computer

To connect to the Internet by using the shared connection, you must confirm the LAN adapter IP
configuration, and then configure the client computer. To confirm the LAN adapter IP
configuration, follow these steps:

1. Log on to the client computer as Administrator or as Owner.


2. Click Start, and then click Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click Local Area Connection and then click Properties.
6. Click the General tab, click Internet Protocol (TCP/IP) in the connection uses the following
items list, and then click Properties.

7. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address
automatically (if it is not already selected), and then click OK.

Note: You can also assign a unique static IP address in the range of 192.168.0.2 to
254. For example, you can assign the following static IP address, subnet mask, and default gateway:

8. IP Address 192.168.31.202
9. Subnet mask 255.255.255.0
10. Default gateway 192.168.31.1

11. In the Local Area Connection Properties dialog box, click OK.

12. Quit Control Panel.

You might also like