SafeFit Reference:

IEC-62380

Rev. 01 May 2019

IEC-62380 SafeFit Reference
Rev.01 - May 2019

Change Control
Revision # 01 Date May 6, 2019
Section Changes
* Initial version
IEC-62380 SafeFit Reference
Rev.01 - May 2019

Contents
1 Resistor 4
1.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Capacitor 5
2.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Diode 6
3.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 Inductor 7
4.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5 Transistor 8
5.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6 Optocoupler 10
6.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7 Connector 11
7.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8 Switch/Keyboard 12
8.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

9 Converter 13
9.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

10 Display 14
10.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

11 Disk Drive 15
11.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
11.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1
IEC-62380 SafeFit Reference
Rev.01 - May 2019

12 Microwave/Piezoelectric 16
12.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

13 Optoelectronic 17
13.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
13.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

14 PCB 19
14.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
14.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

15 Protection 20
15.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
15.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

16 Relay 21
16.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
16.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

17 Lamp 23
17.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
17.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

18 Integrated Circuit 24
18.1 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
18.2 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2
IEC-62380 SafeFit Reference
Rev.01 - May 2019

Abstract
This document lists all supported parameters in SafeFit for the standard IEC-62380.
Names in the Parameter column are the exact string of CSV columns recognized by SafeFit.
The Value column indicates possible values, which can be:

• Designator specification, e.g. R<Num>[<Char>]. This means: a letter, an integer (any

number digits), and an optional upper case character, e.g. R1A, R15, etc.
• Integer ranges, e.g. x >= 0.
• Real number ranges, e.g. x >= 0.0 [W]. Characters between square brackets [] specify
the units in SI format (generally).
• Enumeration values, e.g Carbon (1), Potentiometer (6). As with parameter names, these
exact names are required for successful recognition. Additionally, their index in the list
of values can also be used (zero-based). For a resistor, Carbon is 1, and Potentiometer
is 6.

Sensitivity tables indicate which parameters are required to compute the FIT for a given
component type. Some require all, a few depend only on global parameters, and the rest depend
on a subset.

3
IEC-62380 SafeFit Reference
Rev.01 - May 2019

1 Resistor
1.1 Parameters

Parameter Value
Designator R<Num>[<Char>] (e.g. R1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Low Dissipation Film, Carbon, High
Dissipation Film Low Dissipation
Wirewound, High Dissipation Wirewound,
Low Dissipation Array, Potentiometer
Delta Temp x >= 0.0 [o C]
Operating Power x >= 0.0 [W]
Rated Power x >= 0.0 [W]
Max Temp x >= 0 [o C]
Array Number x >= 0
Annual Turns x >= 0
Parallel Resistance x >= 0.0 [Ω]
Linear Resistance x >= 0.0 [Ω]
Operating Voltage x >= 0.0 [V]

1.2 Sensitivity

Type Sensitivity
Low Dissipation Film Operating Power, Rated Power
Carbon Operating Power, Rated Power, Max Temp
High Dissipation Film Operating Power, Rated Power
Low Dissipation Wirewound Operating Power, Rated Power
High Dissipation Wirewound Operating Power, Rated Power
Low Dissipation Array Operating Power, Rated Power, Max Temp,
Array Number
Potentiometer Operating Power, Rated Power, Max Temp,
Annual Turns, Parallel Resistance,
Linear Resistance, Operating Voltage

4
IEC-62380 SafeFit Reference
Rev.01 - May 2019

2 Capacitor
2.1 Parameters

Parameter Value
Designator C<Num>[<Char>] (e.g. C1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Plastic, Ceramic Temp, Ceramic No Temp,
Tantalum, Aluminium Non Solid
Electrolyte, Aluminium Solid
Electrolyte, Aluminium Polymer
Electrolyte, Variable Ceramic Disk,
NTC
Delta Temp x >= 0.0 [o C]
Applied Peak Voltage x >= 0.0 [V]
Rated Peak Voltage x >= 0.0 [V]
Applied Ripple Voltage x >= 0.0 [V]
Rated Ripple Voltage x >= 0.0 [V]

2.2 Sensitivity

Type Sensitivity
Plastic
Ceramic Temp
Ceramic No Temp
Tantalum
Aluminium Non Solid Electrolyte
Aluminium Solid Electrolyte Applied Peak Voltage, Rated Peak
Voltage, Applied Ripple Voltage, Rated
Ripple Voltage
Aluminium Polymer Electrolyte
Variable Ceramic Disk
NTC

5
IEC-62380 SafeFit Reference
Rev.01 - May 2019

3 Diode
3.1 Parameters

Parameter Value
Designator D<Num> (e.g. D1)
Description Text
FIT x >= 0.0 [1e-9]
Type Signal LP, Recovery Rectifier LP,
Zener LP, Suppressor LP, Suppressor
Trigger LP, Gallium Arsenide LP, Triac
LP, Recovery Rectifier HP, Zener HP,
Suppressor HP, Suppressor Trigger HP,
Gallium Arsenide HP, Triac HP
Delta Temp x >= 0.0 [o C]
Usage Triac Permanent Reverse, Triac
Ocasional Reverse, Triac Permanent
Forward, Triac Ocasional Forward,
Other
Environment Computer, Telecom Switching, Telecom
Transmitting, Telecom Subscriber,
Railway Payphone, Civilian Avionics,
Voltage Supply Converter, Non
Interface
Package TO18, TO39, TO92, SOT23, SOT143, SOT223,
SOT323, SOT343, SOT346, SOT363, SOT457,
SOT89, SOT32 TO126, SOT82, DPACK
SOT428, D2PACK, TO220, TO218 SOT93,
TO247, ISOTOP, SOT90B, SO8, DO34
DO204AG, DO35 DO204AH, DO41 DO204AL
Glass, DO41 DO204AL Plastic, F126,
Micromelf, SOD80 Minimelf, Melf,
SOD110, SOD123, SOD323, SOD523, SMA, SMB
DO214, SMC DO215, DO220, SOD15
Dissipated Power x >= 0.0 [W]
Thermal Resistance x >= 0.0 [o C/W]

3.2 Sensitivity

Complete - all parameters are used in all cases.

6
IEC-62380 SafeFit Reference
Rev.01 - May 2019

4 Inductor
4.1 Parameters

Parameter Value
Designator L<Num> (e.g. L1)
Description Text
FIT x >= 0.0 [1e-9]
Type Fixed Low Current, Variable Low
Current, Power inductor, Signal
transformer, Power transformer
Delta Temp x >= 0.0 [o C]
Power Loss x >= 0.0 [W]
Radiant Surface x >= 0.0 [dmˆ2]

4.2 Sensitivity

Complete - all parameters are used in all cases.

7
IEC-62380 SafeFit Reference
Rev.01 - May 2019

5 Transistor
5.1 Parameters

Parameter Value
Designator Q<Num> (e.g. Q1)
Description Text
FIT x >= 0.0 [1e-9]
Type Bipolar, GaAs Bipolar, MOS, IGBT, FET,
GaAs FET
Delta Temp x >= 0.0 [o C]
Max Vds x >= 0.0 [V]
Min Spec Vds x >= 0.0 [V]
Max Vgs x >= 0.0 [V]
Min Spec Vgs x >= 0.0 [V]
Max Vce x >= 0.0 [V]
Min Spec Vce x >= 0.0 [V]
Dissipated Power x >= 0.0 [W]
Thermal Resistance x >= 0.0 [o C/W]
Power Type LP, HP
Environment Computer, Telecom Switching, Telecom
Transmitting, Telecom Subscriber,
Railway Payphone, Civilian Avionics,
Voltage Supply Converter, Non
Interface
Package TO18, TO39, TO92, SOT23, SOT143, SOT223,
SOT323, SOT343, SOT346, SOT363, SOT457,
SOT89, SOT32 TO126, SOT82, DPACK
SOT428, D2PACK, TO220, TO218 SOT93,
TO247, ISOTOP, SOT90B, SO8, DO34
DO204AG, DO35 DO204AH, DO41 DO204AL
Glass, DO41 DO204AL Plastic, F126,
Micromelf, SOD80 Minimelf, Melf,
SOD110, SOD123, SOD323, SOD523, SMA, SMB
DO214, SMC DO215, DO220, SOD15

5.2 Sensitivity

8
IEC-62380 SafeFit Reference
Rev.01 - May 2019

Type Sensitivity
Bipolar Max Vce, Min Spec Vce, Power Type,
Environment, Package, Dissipated Power,
Thermal Resistance
GaAs Bipolar Max Vds, Min Spec Vds, Max Vgs, Min
Spec Vgs, Power Type, Environment,
Package, Dissipated Power, Thermal
Resistance
MOS Max Vds, Min Spec Vds, Max Vgs, Min
Spec Vgs, Power Type, Environment,
Package, Dissipated Power, Thermal
Resistance
IGBT Max Vds, Min Spec Vds, Max Vgs, Min
Spec Vgs, Power Type, Environment,
Package, Dissipated Power, Thermal
Resistance
FET Max Vds, Min Spec Vds, Max Vgs, Min
Spec Vgs, Power Type, Environment,
Package, Dissipated Power, Thermal
Resistance
GaAs FET Max Vds, Min Spec Vds, Max Vgs, Min
Spec Vgs, Power Type, Environment,
Package, Dissipated Power, Thermal
Resistance

9
IEC-62380 SafeFit Reference
Rev.01 - May 2019

6 Optocoupler
6.1 Parameters

Parameter Value
Designator OC<Num> (e.g. OC1)
Description Text
FIT x >= 0.0 [1e-9]
Delta Temp x >= 0.0 [o C]
Environment Computer, Telecom Switching, Telecom
Transmitting, Telecom Subscriber,
Railway Payphone, Civilian Avionics,
Voltage Supply Converter, Non
Interface
Package TO18, TO39, TO92, SOT23, SOT143, SOT223,
SOT323, SOT343, SOT346, SOT363, SOT457,
SOT89, SOT32 TO126, SOT82, DPACK
SOT428, D2PACK, TO220, TO218 SOT93,
TO247, ISOTOP, SOT90B, SO8, DO34
DO204AG, DO35 DO204AH, DO41 DO204AL
Glass, DO41 DO204AL Plastic, F126,
Micromelf, SOD80 Minimelf, Melf,
SOD110, SOD123, SOD323, SOD523, SMA, SMB
DO214, SMC DO215, DO220, SOD15
Applied Voltage x >= 0.0 [V]
Insulation Voltage x >= 0.0 [V]
Dissipated Power x >= 0.0 [W]
Thermal Resistance x >= 0.0 [o C/W]

6.2 Sensitivity

Complete - all parameters are used in all cases.

10
IEC-62380 SafeFit Reference
Rev.01 - May 2019

7 Connector
7.1 Parameters

Parameter Value
Designator J<Num> (e.g. J1)
Description Text
FIT x >= 0.0 [1e-9]
Type Cir/Rect, Coaxial, PCB/Socket
Material Gold, Silver, Tin, Other
Contacts x >= 0
Operating Current x >= 0.0 [A]
Rated Current x >= 0.0 [A]

7.2 Sensitivity

Type Sensitivity
Cir/Rect Material, Rated Current, Operating Current, Contacts
Coaxial Material, Rated Current, Operating Current
PCB/Socket Material, Rated Current, Operating Current, Contacts

11
IEC-62380 SafeFit Reference
Rev.01 - May 2019

8 Switch/Keyboard
8.1 Parameters

Parameter Value
Designator (S|SW)<Num> (e.g. SW1)
Description Text
FIT x >= 0.0 [1e-9]
Type Toggle, Push, Keyboard, Rotary
Type2 Reversible, Other, Keyboard
Contacts x >= 0

8.2 Sensitivity

Complete - all parameters are used in all cases.

12
IEC-62380 SafeFit Reference
Rev.01 - May 2019

9 Converter
9.1 Parameters

Parameter Value
Designator CONV<Num>[<Char>] (e.g. CONV1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Converter < 10W, Converter 10W to 30W

9.2 Sensitivity

Complete - all parameters are used in all cases.

13
IEC-62380 SafeFit Reference
Rev.01 - May 2019

10 Display
10.1 Parameters

Parameter Value
Designator (DS|DISP|DISPLAY)<Num>[<Char>] (e.g. DISP1A)
Description Text
FIT x >= 0.0 [1e-9]
Type LCD 10-char, CRT, LCD

10.2 Sensitivity

Complete - all parameters are used in all cases.

14
IEC-62380 SafeFit Reference
Rev.01 - May 2019

11 Disk Drive
11.1 Parameters

Parameter Value
Designator DSK<Num>[<Char>] (e.g. DSK1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Battery Primary Cells, Battery
Secondary Cells Ni-Cd, Battery
Secondary Cells Li-Ion, IC Fan, Ball
Bearing Fan, Bearing Fan,
Thermoelectric Cooler, Long Duration
Disk Drive

11.2 Sensitivity

Complete - all parameters are used in all cases.

15
IEC-62380 SafeFit Reference
Rev.01 - May 2019

12 Microwave/Piezoelectric
12.1 Parameters

Parameter Value
Designator (MW|MICROW|PZ|PIEZO)<Num>[<Char>]
(e.g. PIEZO1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Microwave Passive: Fixed, Microwave
Passive: Variable, Microwave Passive:
w/Ferrite, Piezo Resonator, Piezo
Oscillator: XO, PXO, Piezo
Oscillator: VCXO, TCXO, Piezo
Oscillator: OCXO, Acoustic Wave
Filters

12.2 Sensitivity

Complete - all parameters are used in all cases.

16
IEC-62380 SafeFit Reference
Rev.01 - May 2019

13 Optoelectronic
13.1 Parameters

Parameter Value
Designator (DL|LED|LSR|PHD|LDR|OPTIC)<Num>[<Char>]
(e.g. DL10A, LDR1B)
Description Text
FIT x >= 0.0 [1e-9]
Type LED Modules, Laser Modules,
Photodiodes/RX Modules for Telecom,
Passive Optic, Miscellaneous Optic
Delta Temp x >= 0.0 [o C]
Power x >= 0.0 [W]
Optical Power x >= 0.0 [W]
Rth x >= 0.0 [o C/W]
Subtype Depends on Type
(LED Modules) Emitter DEL w/o Driver, Emitter DEL
w/ Driver, Emitter/Receiver DEL + PIN
w/ Driver, Emitter/Receiver DEL + APD
w/ Driver
(Laser Modules) Elementary Emitter: GaAlAs/GaAs,
Elementary Emitter: InGaAs/InP,
Emitter w/ Driver InGasAs/InP,
Emitter Receiver PIN InGaAs/InP,
Integrated Modulator InGaAs/InP, Pump
Laser: LP InGaAs/InP, Pump Laser: HP
InGaAs/InP, Pump Laser: InGaAs/GaAs
(Photodiodes/RX Modules for Telecom) PIN Diode: Silicon, PIN Diode: InGaAs,
APD Diode: Silicon, APD Diode:
Germanium, APD Diode: InGaAs, PIN
Module: w/ Driver, APD Module: w/
Driver

17
IEC-62380 SafeFit Reference
Rev.01 - May 2019

Parameter Value
(Passive Optic) Attenuator: Bulk, Attenuator: Fusion
Splice <= 10db, Attenuator: Fusion
Splice > 10db, Attenuator: Pasted
Splice, Fusing: 1 to 2, Fusing: 1 to N
(<= 5), Integrated Coupler, Mux/Demux:
Fusing 1 to 2, Mux/Demux: Fusing 1 to
N, Mux/Demux: Micro-optic, Connectors,
Jumper/Optical Cord, Optical Fibre,
Doped Optical Fibre
(Miscellaneous Optic) LiNbO3 Modulator, Isolator, Accordable
Filter, Bragg Array Filter, Optical
Commutator: Mirror, Optical
Commutator: Prism, VCSEL 840 nm,
Thermoelectric Cooler, Thermistor

13.2 Sensitivity

Type Sensitivity
LED Modules Power, Rth, Subtype
Laser Modules Power, Optical Power, Rth, Subtype
Photodiodes/RX Modules for Telecom Power, Rth, Subtype
Passive Optic Subtype
Miscellaneous Optic Subtype

18
IEC-62380 SafeFit Reference
Rev.01 - May 2019

14 PCB
14.1 Parameters

Parameter Value
Designator PCB<Num>[<Char>] (e.g. PCB1A)
Description Text
FIT x >= 0.0 [1e-9]
Holes x >= 0
Area x >= 0.0 [cmˆ2]
Solder Connections x >= 0
Crimp Connections x >= 0
Wrapped Connections x >= 0
Pressfit Connections x >= 0
Track Width x >= 0.0 [mm]
Layers x >= 0

14.2 Sensitivity

Complete - all parameters are used in all cases.

19
IEC-62380 SafeFit Reference
Rev.01 - May 2019

15 Protection
15.1 Parameters

Parameter Value
Designator (D|PTC|VAR|F|ARR)<Num>[<Char>]
(e.g. PTC1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Diode: TVS LP, Diode: Trigger TVS LP,
Diode: TVS HP, Diode: Trigger TVS HP,
Thermistor PTC, Varistor, Fuse,
Arrestor: Solid State, Arrestor: Gas
Tube
Environment Computer, Telecom: Switching, Telecom:
TX Access/Subs Card, Telecom:
Subscriber, Railways/Payphone,
Civilian Avionics, Voltage
Supply/Converters

15.2 Sensitivity

Complete - all parameters are used in all cases.

20
IEC-62380 SafeFit Reference
Rev.01 - May 2019

16 Relay
16.1 Parameters

Parameter Value
Designator (K|RY|RLA)<Num>[<Char>] (e.g. RLA1A)
Description Text
FIT x >= 0.0 [1e-9]
Type Mercury Wetted Reed: LP Monostable,
Mercury Wetted Reed: LP Bistable
Latching, Dry Reed LP: Monostable, Dry
Reed LP: Bistable Latching,
Electromechanical: Miniature,
Electromechanical: Thermal,
Industrial, HV Vaccuum, HP Mercury
Wetted
Active Contacts x >= 0
Inverse Contacts x >= 0
Transient Voltage x >= 0.0 [V]
Transient Current x >= 0.0 [A]
Cycle Rate x >= 0.0 [Hz]
Enclosure Hermetically Sealed, Sealed, Dust
Protected, Exposed Contact, Mercury
Wetted
Pollution Low, Moderate, High
Current Type AC, DC

16.2 Sensitivity

Type Sensitivity
Mercury Wetted Reed: LP Monostable Active Contacts, Inverse Contacts,
Cycle Rate
Mercury Wetted Reed: LP Bistable Active Contacts, Inverse Contacts,
Latching Cycle Rate
Dry Reed LP: Monostable Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current

21
IEC-62380 SafeFit Reference
Rev.01 - May 2019

Type Sensitivity
Dry Reed LP: Bistable Latching Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current
Electromechanical: Miniature Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current, Enclosure,
Pollution, Current Type
Electromechanical: Thermal Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current, Enclosure,
Pollution, Current Type
Industrial Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current, Enclosure,
Pollution, Current Type
HV Vaccuum Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current, Enclosure,
Pollution, Current Type
HP Mercury Wetted Active Contacts, Inverse Contacts,
Cycle Rate, Transient Voltage,
Transient Current, Enclosure,
Pollution, Current Type

22
IEC-62380 SafeFit Reference
Rev.01 - May 2019

17 Lamp
17.1 Parameters

Parameter Value
Designator LAMP<Num>[<Char>] (e.g. LAMP1A)
Description Text
FIT x >= 0.0 [1e-9]

17.2 Sensitivity

Only depends on the Mission Profile.

23
IEC-62380 SafeFit Reference
Rev.01 - May 2019

18 Integrated Circuit
18.1 Parameters

Parameter Value
Designator (IC|U)<Num>[<Char>] (e.g. U1A)
Description Text
FIT x >= 0.0 [1e-9]
Type BICMOS: Digital, BICMOS:
Linear/Digital (< 6V), BICMOS:
Linear/Digital (>= 6V), BICMOS: SRAM,
BICMOS: Gate Array, Bipolar: Digital,
Bipolar: Linear, Bipolar: MMIC,
Bipolar: Linear/Digital (< 30V),
Bipolar: Linear/Digital (>= 30V),
Bipolar: SRAM, Bipolar: PROM, Bipolar:
PLD/PAL, Bipolar: Gate Array, GaAs:
Digital, Normally ON, GaAs: Digital,
Normally ON/OFF, GaAs: MMIC,
Low-Noise LP, GaAs: MMIC, Power
Microwave, ASIC: Std Cell/Full Custom,
ASIC: Gate Array, ASIC: LCA,
RAM-based, ASIC: PLD, GAL/PAL, ASIC:
CPLD, EPLD/MAX/FLEX/FPGA, MOS:
Digital/MCU/DSP, MOS: Linear, MOS:
Digital/Linear, MOS: ROM, MOS:
DRAM/VideRAM/AudioRAM, MOS: RAM, High
Speed/FIFO, MOS: SRAM, LP, MOS: SRAM,
Double Access, MOS:
EPROM/UVPROM/REPROM, MOS: OTP, MOS:
FLASH, MOS: EEPROM/Flash EEPROM
Delta Temp x >= 0.0 [o C]

24
IEC-62380 SafeFit Reference
Rev.01 - May 2019

Parameter Value
Package TO18, TO39, TO92, SOT23, SOT143, SOT223,
SOT323, SOT343, SOT346, SOT363, SOT457,
SOT89, SOT32 TO126, SOT82, DPACK
SOT428, D2PACK, TO220, TO218 SOT93,
TO247, ISOTOP, SOT90B, SO8, DO34
DO204AG, DO35 DO204AH, DO41 DO204AL
Glass, DO41 DO204AL Plastic, F126,
Micromelf, SOD80 Minimelf, Melf,
SOD110, SOD123, SOD323, SOD523, SMA, SMB
DO214, SMC DO215, DO220, SOD15
Package Material Plastic, Ceramic, Metallic
Technology MOS/BICMOS LV, Bipolar/BICMOS HV, AsGa
Numerical, AsGa MMIC
Power Dissipation x >= 0.0 [W]
Cooling Natural Convection, Slightly Assisted,
Fan Assisted, Forced
Pins x >= 0
Transistor Number x >= 0
Year x >= 0
Substrate Epoxy Glass, PTFE Glass, Flexible,
Cu-Invar-Cu
Electrical Environment Computer, Telecom Switching, Telecom
Transmitting, Telecom Subscriber,
Railway Payphone, Civilian Avionics,
Voltage Supply Converter, Non
Interface

18.2 Sensitivity

Complete - all parameters are used in all cases.

25