An ITT Brand

Goulds 3355
Multistage Process Pump
3355
Multistage Pumps Designed for a Wide Applications
Range of High Pressure Services
• Boiler Feed
• Capacities to 1,500 GPM (340 m3/hr)
• Condensate Return
• Heads to 1,640 feet (500 m)
• Deaerator
• Temperatures to 280° F (140° C)
• Reverse Osmosis
• Pressures to 800 psig (55 bar)
• Shower/Spray Service

• Mine De-watering
Performance Features for High
Pressure Services • Cleaning Systems

Improved Reliability • Seal Water Booster

• Heavy duty bearing design • Product Transfer

• No external balance lines • Reactor Feed

• Internal seal flushing • Pressure Boosting

• Metal to metal casing fits

Multiple nozzle orientations to fit your piping
Ease of Maintenance configurations.
• Modular design

• Off-the-shelf components

• Fully interchangeable stages

• No balancing drum/disc

• Fewer parts than traditional designs

Radial Suction Configuration. Radial nozzles are rotatable at 90° increments.
• Metal fits guarantee alignment

• No flush/bypass lines

• Easily retrofitted

Safety

• ANSI B15.1 Coupling Guard

• Fully confined stage o-rings

End Suction Configuration. Optional Inducer is available for low
• Internal flushing & balance NPSH applications.

• Raised face flanges

2 3355
 Hydraulic Coverage
60 Hz / 3600 rpm

2000
5x6-11B

1000
TOTAL HEAD-FEET

700

500
1.5x2-7A 1.5x2-7B 2.5x4-8A 2.5x4-8B 4x5x4-10A 4.5x10B
400
300

200
5x8-11A

100

70
50
30 40 50 70 100 200 300 400 500 700 1000 2000
CAPACITY-GALLONS PER MINUTE

50 Hz / 3000 rpm
600
1.5x2.5-7B

400

300
TOTAL HEAD-METERS

200

150

1.5x2-7A 2.5x4-8A 4x5-10A 5x6-11A 5x6-11B

100
80

60

40
20 2.5x4-8B 4x5-10B

10
6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500
CAPACITY-m /h 3

3355 3
Rugged Design Features for
Wide Range of Services

DIFFUSERS
Eliminates radial loads to
assure long bearing life.

ANGULAR CONTACT,
DOUBLE-ROW THRUST BEARINGS
Can carry a thrust load in either direction

INTERNAL BALANCING
Eliminates the need for balance lines
outside the pump.

Wear Rings
Optional case wear rings available

SHAFT
Standard material is 12-13% chrome for
improved shaft strengths and corrosion
resistance.

KEYED IMPELLERS
Offset keys ensure rotational
shaft balance.

As optional inducer is available on The 3355 is also available in

the End Suction configuration for End Suction configuration.
SUCTION IMPELLER
low NPSH applications.
First stage suction impeller is designed with
a large eye area to provide reliable operation
in low NPSHA applications.

4 3355
FEWER PARTS
The 3355 uses fewer parts than traditional multistage
pumps with balancing devices, which means less
inventory and increased maintenance ease.

PRODUCT LUBRICATED BEARINGS

(ES Configuration)
Frontal sleeve bearing is located
behind first stage of the impeller for
improved performance and reliability.

HIGH STRENGTH TIE RODS

Bolting machined to SAE standards
using high tensile strength steel,
resulting in easy maintenance.

INTERSTAGE CASING FITS

Metal fits ensure proper
alignment of the stages at any
temperature. No deflection due
to o-ring-fits.

SEAL CHAMBER
Taper Bore design eliminates the
worry associated with venting.
Improved flow to the seal helps
extend seal life.

INTERNAL SEAL FLUSHING

Special internal channels ensure
the seal always has sufficient
flushing fluid.

MULTIPLE HYDRAULICS
Two impeller/diffuser combinations
per size maximizes efficiency at all
conditions of service.

DEEP-GROOVE BALL BEARINGS

Are unconstrained to accommodate
thermal expansion.

3355 5
Other Features for
Application Flexibility
136A 112 248 104 178 356A 425 492Q 184 157 193B 409

228C 397A 119 383S 445E 357F 437A 358 252 100F 412K 101 150 100G 356S 100D 122

Parts List and Materials of Construction

6 3355
 Dimensions
Radial Suction End Suction

Dimensions
DIMENSIONS
Pump
NPSI NPS2 A W D X
Size
1.5x2.5-7 1.5 2.5 9.06 11.02 5.51 7.09
2.5x4-8 2.5 4 9.84 12.40 6.30 8.27
4x5-10 4 5 13.38 14.58 8.27 9.84
5x6-11 5 6 15.75 17.72 9.84 11.81

Number of Stages
Pump NUMBER OF STAGES
Size 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
M 5.7* 7.87 10.04 12.20 14.37 16.54 18.70 20.87 23.03 25.20 27.36 29.53 31.69 33.66 36.02
1.5x2.5-7 CP 24.72 26.88 29.05 31.21 33.38 35.55 37.71 39.88 42.04 44.21 46.37 48.54 50.70 52.87 55.03
Y 9.44 11.81 13.78 15.94 18.11 20.28 22.44 24.60 26.77 28.94 31.10 33.27 35.43 37.60 39.77
M 7.09 9.84 12.60 15.35 18.11 20.87 23.62 26.38 29.13 31.88 34.65 37.40
2.5x4-8 CP 25.64 31.29 34.05 36.80 39.56 42.32 45.07 47.53 50.58 53.33 55.10 58.56
Y 11.02 13.78 16.54 19.29 22.05 24.80 27.56 30.31 33.07 35.83 38.58 41.33
M 10.03 13.39 16.73 20.06 23.43 26.77 30.12 33.47
4x5-10 CP 35.26 36.62 41.96 45.31 48.56 52.00 56.35 58.70
Y 15.75 19.09 22.44 25.79 29.13 32.48 36.83 39.18
M 12.40 16.54 20.67 24.80 26.94 33.07
5x6-11 CP 43.31 47.45 51.58 55.71 59.65 63.96
Y 15.90 23.03 27.17 31.30 35.43 39.57

*Note: Add 0.79" to "Y" dim for size 2.5x4-8 with inducer design.

3355 7
Locations

Manufacturing Center

PRO Services Center

For more information Please Visit:

www.gouldspumps.com | www.ittproservices.com

An ITT Brand
240 Fall Street
Seneca Falls, NY 13148
Phone: 315.568.2811
Fax: 315.568.2418
www.gouldspumps.com © 2023 ITT Goulds Pumps Inc. B.3355.en-US.2023-05