Zboomspec Z80 60 En-Us Na LR

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Articulated Boom Lifts ANSI A92.20, CSA B354.

Genie Z -80 / 60
® ®

Specifications Range of motion Z-80 / 60


90 ft
Models Z-80/60 27.43 m

Measurements US Metric 80 ft
 orking height max.(1)
W 84 ft 25.77 m 24.38 m

Platform height max. 78 ft 23.77 m 70 ft


21.34 m
Horizontal reach max. 60 ft 18.29 m
Below ground reach 15 ft 10 in 4.83 m 60 ft
18.29 m
Up and over clearance max. 29 ft 8.83 m
A Platform length (8 ft/6 ft) 3 ft/2 ft 6 in 0.91 m / ​0.76 m 50 ft
15.24 m
B Platform width (8 ft/6 ft) 8 ft/6 ft 2.44 m / ​1.83 m
C Height - stowed 9 ft 10 in 3.00 m 40 ft
12.19 m
D Length - stowed 37 ft 11.27 m
D Length - storage/transport (jib tucked under) 24 ft 10.5 in 7.3 m 30 ft
9.14 m

E Length - transport 37 ft 11.27 m


20 ft
F Width 8 ft 2 in 2.49 m 6.1 m

G Wheelbase 9 ft 4 in 2.85 m
10 ft
H Ground clearance - center 12 in 0.30 m 3.05 m

0 ft
Productivity 0m

L ift capacity max. - unrestricted 500 lb 227 kg -10 ft


Platform rotation 160° -3.05 m

Jib length 6 ft 1.83 m -20 ft


Vertical jib rotation 135° -6.1 m
-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft
Turntable rotation 360° -3.05 m 0m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m

Drive speed - stowed(2) 3.0 mph 4.83 km/h


Drive speed - raised 0.68 mph 1.1 km/h
Gradeability - stowed(2) 30 %
Tilt sensor activation (front to back/side to side) 4.5° / 4.5°
Turning radius - inside/outside 14 ft 6 in / ​24 ft 6 in 4.42 m / ​7.47 m
Tires 18-625 NHS

Power
Power Diesel
Auxiliary power unit 12 V DC
Hydraulic tank capacity 45 gal 170 L
Fuel tank capacity 35 gal 132 L

Weight(3) and Floor Loading(4)


Weight, 2WS 37,500 lb 17,010 kg
Weight, 4WS 38,000 lb 17,237 kg
Tire contact pressure 130 psi 896 kPa
Occupied floor pressure (tires) 377 psf 18.05 kPa

Sound and Vibration Levels


Sound Pressure level (ground workstation) 85 dBA
S ound Pressure level (platform workstation) 74 dBA
Vibrations 8 ft 2 in/s² 2.5 m/s2

E
A

F B C

H
D G

(1) The metric equivalent of working height adds 2 m to platform height. The imperial equivalent adds 6 ft to platform height.
(2) Gradeability applies to driving on slopes and may vary depending on options and machine configurations. See operator’s manual
for details regarding slope ratings.
(3) Weight refers to standard configuration and may vary depending on options and/or country standards.
(4) Floor loading information is approximate and may vary depending on options and machine configurations. It should be used only
with adequate safety factors.
Articulated Boom Lifts ANSI A92.20, CSA B354.6

Genie Z -80 / 60
® ®

SKU: Standard Model


• Z8000001AF0049: Z-80/60, 4WD
• Z8000001AF0078: Z-80/60, 12kW Welder Ready, 4WD, 2WS
* Build to Order

Option availability S S+ BtO S Standard


67 hp, 50 kW, Perkins, 404F-E22TA, Turbo Diesel, T4f ✔ ✔ ✔ S+ Standard +
70 hp, 52 kW, GM Vortec 3.0L Gas/LPG Dual Fuel ✔ ✔ ✔ BtO Build to Order
74 hp, 55 kW, Deutz TD2.9L4 turbo diesel, Tier 4f ✔ ✔ ✔ ✔ Standard Features
Cold weather package ✔ ✔ ❍ ❍ Options
Power

Diesel air intake pre-cleaner ✔ ✔ ❍


LPG tank 33.5 lb ✔ ❍ ❍
Positive air shutdown system ✔ ✔ ❍
Auto engine fault shutdown ✔ ✔ ✔
Engine gauge display ✔ ✔ ✔
Genie FastMast 3 Steering Modes Outreach 60ft/18m
6ft/1.83m dual-entry platform with side swing gate ✔ ✔ ❍
8ft/2.44m tri-entry platform with side swing gate ✔ ✔ ✔
Dual axis joystick steering ✔ ✔ ✔
Thumb rocker steering ✔ ✔ ❍
Air line to platform ✔ ✔ ❍
Control box covers ✔ ❍ ❍
Lift Guard Full Mesh panels ✔ ✔ ❍
Lift Guard Half Mesh panels ✔ ✔ ❍
Light Package: drive and work lights ✔ ❍ ❍
Platform auxiliary top rail ✔ ✔ ❍
3kW AC Generator, 110V/60Hz ✔ ✔ ❍
Platform

3kW AC Generator, 220V/50Hz ✔ ✔ ❍


12kW Welder ready ✔ ✔ ❍
6ft/1.83m Jib ✔ ✔ ✔
AC Power cord to platform ✔ ✔ ✔
Alarm package: flashing beacons, descent, travel and tilt alarms ✔ ✔ ✔
Drive enable system ✔ ✔ ✔
Horn ✔ ✔ ✔
Lift Guard Contact Alarm ✔ ✔ ✔
Lift Tools Work Tray ✔ ✔ ✔
Platform load sense system ✔ ✔ ✔
Proportional controls ✔ ✔ ✔
Self-leveling platform ✔ ✔ ✔
Telescoping riser for up and over ✔ ✔ ✔
Lift Connect Telematics ✔ ❍ ❍
Telematics-ready ✔ ✔ ✔
Lift Connect with Access Manager upgrade ✔ ❍ ❍
Biodegradable hydraulic oil ✔ ✔ ❍
Cold weather hydraulic oil ✔ ✔ ❍
Fire resistant hydraulic oil ✔ ✔ ❍
Rough terrain, foam-filled tires ✔ ✔ ✔
Rough terrain, foam-filled, non-marking tires ✔ ❍ ❍ Genie Genuine Accessories(1)
Chassis

2 wheel steering ✔ ✔ ✔
4 wheel steering ✔ ✔ ❍
• Lift Tools Productivity Tools
Deluxe hostile environment kit ✔ ✔ ❍
Hostile environment kit ✔ ✔ ❍ • Lift Connect Telematics
2 speed wheel motors ✔ ✔ ✔ • Tech Pro Link Handheld Device
Active oscillating axle ✔ ✔ ✔ (1) More accessories available from Genie Genuine Parts.
Chassis tilt drive function cut-out ✔ ✔ ✔
Chassis tilt lift function cut-out ✔ ✔ ✔
Hour meter ✔ ✔ ✔ Product specifications are subject to change without notice or obligation. Photographs
Hydraulic oil cooler ✔ ✔ ✔ and/or drawings herein are for illustrative purposes only. Refer to the appropriate
Operator’s Manual for instructions on proper equipment use. Failure to follow instructions
Positive air shutdown Deutz engines only in the Operator’s Manual may result in serious injury or death. The only warranty
applicable to our equipment is the standard written warranty applicable to the particular
product and sale and we make no other warranty, express or implied. Products and
services listed may be trademarks, service marks or trade names of Terex Corporation
and/or their subsidiaries in the USA and many other countries. Terex, Genie, Quality By
Design, Xtra Capacity, Lift Power, Lift Guard, Lift Tools, Lift Connect and Tech Pro Link are
registered trademarks of Terex Corporation or its subsidiaries.
05/23

© 2023 Terex Corporation

You might also like