5 CorelDRAW Worksheet 2 1 ShapeBuilding Basics

TLE 10 -Illustration
WORKSHEET 2.1 – SHAPE BUILDING BASICS
CorelDRAW: Shape Building Basics
This CorelDRAW tutorial focuses entirely on creating elements from basic shapes using a small
selection of the program's shape tools. Additionally, we'll play with some of the tools, toolbars, and
dockers dedicated to altering said shapes.
1. From Rectangle to Pumpkin
Step 1: Create a New Document and draw a rectangle with the Rectangle Tool (F6). Select the newly
drawn rectangle and in the Property Bar, you'll find options for altering the shape and radius of its
corners. Choose Round Corners and enter 2.0" for the Corner Radius.
https://design.tutsplus.com/tutorials/coreldraw-shape-building-basics--cms-22190
Step 2: In order to adjust the shape's nodes, select the rounded rectangle and hit Convert to Curves
(Control-Q). Using the Pick Tool, Scale the rounded rectangle inward so it's thinner. Then, use
the Shape Tool (F10) to adjust the shape's nodes so the top of the shape is narrower than the bottom
(see below).
Step 3
1. Copy (Control-C) and Paste (Control-V) the rounded rectangle shape and, using the Pick
Tool, Double-Click the copied object so you can rotate it toward the center of the design.
2. Copy and Paste the shape on the left and hit Mirror Horizontally in the Property Bar. Once
again, adjust the nodes of each shape with the Shape Tool so you've got more of a lumpy
pumpkin look.
3. In Object Manager, place the two side shapes behind the center shape. Paste another pumpkin
section behind the three objects already drawn. Rotate it to the center, Scale it down, and adjust
the nodes as needed.
4. I opted for six objects total. Group (Control-G) your pumpkin shapes together.
Step 4: Select each section of the pumpkin in Object Manager and in Object Properties (Alt-
Enter), change the Outline to null and each object's Fill color to a varying shade of orange. From front
to back, I chose these four shades:
• #FFB02D
• #FF9C1E
• #FF862C
• #FF782C
Copy and Paste the pumpkin group and Ungroup (Control-U) the objects. With all of them still
selected, hit Weld in the Property Bar. When you Copy and Paste an object, you'll notice it's already
aligned with its parent item. Push the welded object behind the pumpkin group in the Object
Manager and set the Outline to dark orange ( #F74A00 ) at 4.0 pt Weight.
2. From Ellipses to Leaves and a Stem
Step 1
1. Use the Ellipse Tool (F7) to draw a circle (hold Control to keep it uniform in shape).
2. Hit Convert to Curves in the Property Bar and use the Shape Tool to pull the right node out to
the right, extending the shape into a sideways teardrop.
3. With the Smear Tool, select Pointy Smear in the Property Bar and bring the right side to a
point. Adjust the tool's size and pressure to your liking.
4. Switch to Smooth Smear and carefully brush it across the leaf shape so it looks longer and more
like a wiggling, waving leaf.
5. How extreme of a shape your ellipse becomes is up to you. My final shape is seen below.
Step 2
1. Place the leaf on the top of the pumpkin. Scale and Rotate as needed. Copy and Paste the leaf
so you have two of them. Add an Outline of 2.0 pt Weight in the Object Properties docker.
2. Draw an ellipse that bisects the first leaf.
3. In the Property Bar, change the drawn shape from Ellipse to Arc. Set the Outline color to match
the leaves' outline color.
4. Select both the arc and leaf, and hit Intersect in the Properties Bar. Delete the arc object in
the Object Manager and set the newly created shape's Outline to 2.0 pt Weight.
5. Copy, Paste, and Rotate for the second leaf. Make sure the leaf's vein is behind the first leaf in
the Object Manager.
Step 3
For the stem, we'll use two alternate shape tools.
1. Start with the 3-Point Ellipse Tool and draw a line that takes up the width of your stem.
2. After clicking with your mouse, drag the tool upward to create the ellipse. Keep it horizontal and
relatively narrow.
3. Set the Fill color to brown ( #996633 ).
4. Use the 3-Point Rectangle Tool to drag a line across the width of the ellipse and pull a rectangle
down to the length of your stem.
5. Set both of the objects at brown for the Fill color and null for the Outline color.
6. Copy and Paste the ellipse twice and place one at the bottom of the rectangle. Weld one of the
top ellipses, the rectangle, and the bottom ellipse together.
Step 4
1. Change the welded object's color to a darker brown ( #663300 ).
2. Use the Shape Tool to select the nodes of the bottom of the stem shape and bring them inward.
3. Keep the bottom rounded by adjusting both nodes and node handles. Group the two objects
together.
4. Place the stem underneath the first three sections of the pumpkin (you will likely have
to Ungroup these objects to place it). Add a dark brown Outline to the main stem shape of 2.0–
3.0 pts Weight.
Step 5
Under the Polygon Tool (Y) in the Toolbox, there are a plethora of custom shape tools. Grab
the Spiral Tool (A), set the number of Spiral Revolutions to 2, and chose Logarithmic Spiral. Draw a
couple of spiral shapes and place them near the stem and leaves.
Great Job, You're Done!
You've learned the basics of CorelDRAW, running through the Ellipse Tool, Rectangle
Tool, Property Bar, Object Manager, Object Properties, and Smear Tool.

5 CorelDRAW Worksheet 2 1 ShapeBuilding Basics

Uploaded by

Copyright:

Available Formats

5 CorelDRAW Worksheet 2 1 ShapeBuilding Basics

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

5 CorelDRAW Worksheet 2 1 ShapeBuilding Basics

Uploaded by

Copyright:

Available Formats

TLE 10 -Illustration

WORKSHEET 2.1 – SHAPE BUILDING BASICS

CorelDRAW: Shape Building Basics

1. From Rectangle to Pumpkin

Great Job, You're Done!

You might also like