0% found this document useful (0 votes)
139 views76 pages

Universal Electronics ATLAS 4-Device Users Guide

Universal Remote Control

Uploaded by

Carlos San
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
139 views76 pages

Universal Electronics ATLAS 4-Device Users Guide

Universal Remote Control

Uploaded by

Carlos San
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 76

Atlas 4A ENG.

fm Page 1 Thursday, April 12, 2007 1:25 PM

ATLAS 4-Device
Universal Remote Control
Control Remoto Universal

Users Guide
Guía del Usuario

PREPROGRAMMED FOR YOUR SET-TOP BOX


Preprogamado PARA SU SET-TOP BOX (aparato
integrado de convertidor y decodificador)
Atlas 4A ENG.fm Page 2 Thursday, April 12, 2007 1:25 PM

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Searching for Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programming Channel Control Lock . . . . . . . . . . . . . . . . . . . . . . . . 11
Unlocking Channel Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Locking Channel Control to CBL. . . . . . . . . . . . . . . . . . . . . . . 12
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Unlocking Volume Control for a Single Device (Individual
Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Unlocking All Volume Control (Global Volume Unlock) . . . . . 13
Locking Volume Control To One Mode (Global Volume Lock) 14
Programming ID Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Programming the Macro Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Programming the Macro Key . . . . . . . . . . . . . . . . . . . . . . . . . 15
Clearing a Macro Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Programming the Master Power Key . . . . . . . . . . . . . . . . . . . 16
Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . 17
Clearing the Master Power Key . . . . . . . . . . . . . . . . . . . . . . . 17
Re-Assigning Device Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Manufacturer’s Codes (Códigos de Fabricante) . . . . . . . . . . . . . . . 41
Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 41
Setup Codes for Audio Receivers. . . . . . . . . . . . . . . . . . . . . . 41
Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 44
Setup Codes for Cable Boxes/Converters . . . . . . . . . . . . . . . 44
Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setup Codes for DVD Recorders. . . . . . . . . . . . . . . . . . . . . . . 51
Setup Codes for DVD Combos. . . . . . . . . . . . . . . . . . . . . . . . . 51
Satellite Receivers and DVR/PVR Systems. . . . . . . . . . . . . . . 52
Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . 52
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setup Codes for TVs (DLP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Setup Codes for TVs (HDTV) . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Setup Codes for TVs (LCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Setup Codes for TV/DVD Combos . . . . . . . . . . . . . . . . . . . . . . 65
Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 66
Setup Codes for TV/VCR/DVD Combos . . . . . . . . . . . . . . . . . . 68
Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

www.urcsupport.com
2
Atlas 4A ENG.fm Page 3 Thursday, April 12, 2007 1:25 PM

INTRODUCTION
The Atlas 4-Device Universal Remote Control by
Universal Electronics is our latest generation universal
remote control. Its sophisticated technology allows you
to consolidate up to five of your original home
entertainment remote controls into one easy-to-use
product. Moreover, its packed with advanced features
such as:
• Preprogrammed control to operate the cable
converter supplied by your cable service provider
• Programmable Master Power key for master on/off
control of your home entertainment equipment with
a single keystroke
• Programmable Macro Key to allow you to activate
certain keys in a specific order
• Channel Lock to lock channel selection only to the
cable converter
• Volume Lock to lock volume controls to one mode or
individual modes
• Device Key Re-Assignment to remotely control a
second (duplicate) device
• Code Search to help program control of older or
discontinued components
• Color-coded keys to quickly locate popular
functions
• Code library for popular video and audio devices
Before using the product, you will need to install the
enclosed batteries and also perform some programming
to operate the specific home entertainment devices you
wish to control.
Please follow the instructions detailed in this manual to
set up the unit and then start enjoying your new remote
control and cable service.

www.urcsupport.com
3
Atlas 4A ENG.fm Page 4 Thursday, April 12, 2007 1:25 PM

FEATURES AND FUNCTIONS


Use the illustration below to locate features on the Atlas
4-Device Universal Remote Control and then study the
Key Charts (on the next three pages) to learn how they
function.
To find out what type of devices can be controlled by
each device key after programming, see “Device Table”
on page 7 .

www.urcsupport.com
4
Atlas 4A ENG.fm Page 5 Thursday, April 12, 2007 1:25 PM

Key Charts
Key Function
Use SETUP for all programming
sequences. Also use to turn
backlighting on and off, if applicable.
Press PWR once to turn on or off a home
entertainment device. For MASTER
POWER control, see “Using the Master
Power Key” on page 16.
Press AUD, VCR, TV, or CBL once to
select a home entertainment device to
control. Also see “Device Table” on
page 7.
Each device key has an embedded LED
(red light) that blinks upon selection
and indicates the remote control is
working and (after programming) is
sending signals.
Use GUIDE to display the program
guide.
Press SETTINGS once to display available
interactive services.

Use INFO to display the current channel


and program information.
Use DAY+ (or DAY-) to move a day
forward (or back) on your cable
converter’s program guide.
Use the Cursor keys to move the cursor
in the program guide and menu screens
and to navigate within the interactive
service.
Use OK/SELECT to choose options, PPV
events, and to tune to programs from
the program guide.
Use PAGE+ (or PAGE-) to page up (or
page down) through menu screens and
the program guide.

Use EXIT to exit out of your cable


converters menu and guide.
Use A, B, or C to access additional cable
features (see your cable converter’s
manual).

www.urcsupport.com
5
Atlas 4A ENG.fm Page 6 Thursday, April 12, 2007 1:25 PM

Key Function
Use VOL+ (or VOL-) to raise (or lower)
the audio volume.

Use FAV to cycle through your favorite


channels stored in your cable converter.

Use CH+ (or CH-) to select the next


higher (or lower) channel.
For DVD players, use these keys to skip
forward (or reverse) through chapters.
For amplifiers/receivers, use these keys
to select the next higher (or lower)
preset station.
Press MUTE once to turn the sound off
or on.
Press LAST once to recall the last
channel.
Reserved for use as a Macro key (see
“Programming the Macro Key” on
page 15).
In all modes except CBL, use REW, PLAY,
FFWD, STOP, and PAUSE to control a
VCR, DVD player, or a PVR (after
selecting a desired device). To record in
the VCR mode, press REC twice.
In the CBL mode, use these keys to
control the DVR/PVR functions of the
set-top box.
Use the keypad numbers (1-9, and 0) to
directly tune channels (e.g., 09).
For amplifiers/receivers, use the keypad
numbers to select inputs 1 through 10.

Press ENTER once to enter a channel


number on some cable systems.

Press STAR as an optional key on your


numeric keypad.
Use BYPASS to control the Bypass
function of your set-top box.
Press TV/VCR to change your video
source (for example, from TV to VCR).

www.urcsupport.com
6
Atlas 4A ENG.fm Page 7 Thursday, April 12, 2007 1:25 PM

Device Table
NOTE: Please refer to the table below when
performing the instructions in
“Programming Device Control” on page 8 or
“Searching for Your Code” on page 10.
After programming, the Atlas 4-Device Universal
Remote Control will be able to control the following
types of devices:
Device Key Controls these types of devices
VCR, TV/VCR Combo, PVR, or extra
DVD Player
Audio Amplifier, Tuner, Receiver, or
Audio Accessories
Television

Cable Box (Converter), Satellite


Receiver, or Video Accessories

INSTALLING BATTERIES

3
1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.

www.urcsupport.com
7
Atlas 4A ENG.fm Page 8 Thursday, April 12, 2007 1:25 PM

3. Align the covers keys with the cases holes and


press the cover back into place. The tab should
click when the cover is locked.
4. Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
NOTE: When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.

PROGRAMMING DEVICE CONTROL


The Atlas 4-Device Universal Remote Control is
preprogrammed to operate the cable box (converter)
provided by your cable system, an RCA TV, a Toshiba
DVD player, and a Pioneer audio receiver. To control
devices other than the default brands, perform the
following steps; otherwise skip this section.
NOTE: If you have another brand of cable converter
or a satellite receiver you would like to control,
you’ll need to unlock the cable ID Lock before
changing the converter code (see “Program-
ming ID Lock” on page 14).
1. Turn on a device and, if applicable, insert
video media, (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down
the codes and device you wish to program
before moving on to step 2.
2. On the remote control, press a device key once
(i.e., AUD, VCR, TV, or CBL); it will blink once.
Then press and hold SETUP until the selected
mode key blinks twice.
3. Use the “Manufacturer’s Codes (Códigos de
Fabricante)” starting on page 41) to locate the
type of device and brand name and then enter
the first four-digit code for your device. If
performed correctly, the selected mode key
will blink twice.

www.urcsupport.com
8
Atlas 4A ENG.fm Page 9 Thursday, April 12, 2007 1:25 PM

NOTE: If the selected mode key emits a long blink,


the entry is invalid. Repeat steps 2 through 3
and try entering the same code again.
4. Aim the remote control at the device and
press PWR once. The device should turn off. If
it does not, repeat steps 2 through 3, trying
each code for your brand until you find one
that works. If it still does not respond, try
searching for the code (see “Searching for
Your Code” on page 10).
NOTE: If the device does not have a PWR key, press
the(Play) key.
5. Repeat steps 1 through 4 for each device you
want the remote control to operate. For future
reference, write down each working device
code in the boxes on the following page.
VCR Code

Device Type:___________________
DVD Code

Device Type:___________________
AUD Code

Device Type:___________________
CBL Code

Device Type:___________________
TV Code

Device Type:___________________

www.urcsupport.com
9
Atlas 4A ENG.fm Page 10 Thursday, April 12, 2007 1:25 PM

SEARCHING FOR YOUR CODE


If your home entertainment device does not respond to
the Atlas 4-Device Universal Remote Control after trying
all of the codes listed for your brand, or if your brand is
not listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.
3. Enter 9 9 1. The TV key will blink twice.

4. Aim the remote control at the TV and press


PWR once.

5. Press and release the CH+ key continuously,


then stop when the TV turns off.

NOTE: In the search mode, the remote control will


send IR codes from its library to the selected
device, starting with the most popular code
first.
6. Press PWR. The TV should turn on, then press
SETUP to lock in the code.

NOTE: If the TV does not turn on during step 6, then


slowly press and release CH- to go back
through the codes, then press SETUP when the
TV turns on.
7. To search for the codes of your other devices,
repeat steps 1 through 6, but substitute the
appropriate key (e.g., AUD, VCR,or CBL) for the
device you are searching for.

www.urcsupport.com
10
Atlas 4A ENG.fm Page 11 Thursday, April 12, 2007 1:25 PM

CHECKING THE CODES


If you have set up the Atlas 4-Device Universal Remote
Control by searching for your device code (on the
previous page), you may need to find out which four-
digit code is operating your equipment.
For example, to find out which code is operating your TV:
1. On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.

2. Enter 9 9 0. The TV key will blink twice.

3. To view the code for the first digit, press 1


once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 9.
NOTE: If a code digit is 0, the selected mode key will
not blink.
4. Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, and 4 for the fourth digit.
Finish writing down the code in the TV Code
boxes on page 9.
5. To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g., AUD, VCR,or CBL) for the device you are
checking. Write down the codes in the
appropriate boxes on page 9.

PROGRAMMING CHANNEL CONTROL LOCK


By default, the remote control’s channel-control
capabilities are locked to the cable converter. The
affected keys* are 1 through 0, CH+, CH-, and LAST. This
will guarantee that you do not inadvertently change a
channel on your TV or VCR. However, you can de-
activate this feature to allow full access to these keys in
the TV and VCR modes.
*NOTE: This feature does not affect the AUD mode.

www.urcsupport.com
11
Atlas 4A ENG.fm Page 12 Thursday, April 12, 2007 1:25 PM

Unlocking Channel Control


1. On the remote control, press CBL once; it will
blink once. Press and hold SETUP until the
CBL key blinks twice.

2. Enter 9 7 3. The CBL key will blink twice.

3. Press CH- once. The CBL key will blink four


times.

Now the remote control will provide TV and VCR


channel-control capabilities while in the TV or VCR
mode.
Locking Channel Control to CBL
1. On the remote control, press CBL once; it will
blink once. Press and hold SETUP until the
CBL key blinks twice.

2. Enter 9 7 3.The CBL key will blink twice.

3. Press CH+ once. The CBL key will blink twice.

Now, regardless of what mode you select (except AUD),


the channel keys will only change channels on your cable
converter.

CHANGING VOLUME LOCK


Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Atlas 4-
Device Universal Remote Control, Global Volume Lock is
set to TV, so you can control TV volume while in the VCR,
TV or CBL mode. You can perform Individual Volume
Unlock on a selected device to set its volume control for
independent operation.

www.urcsupport.com
12
Atlas 4A ENG.fm Page 13 Thursday, April 12, 2007 1:25 PM

NOTE: The audio mode’s (AUD) volume controls are


active regardless of Volume Lock settings.
However, if you lock the volume controls to
the AUD mode, you will have control of the
audio device’s volume in all other modes (i.e.,
VCR, TV, and CBL). This can be an advantage
if, for example, you always listen to home
entertainment devices through your receiver’s
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1. Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g., CBL) and press it once. Next,
press and hold SETUP until the device key
blinks twice.

2. Enter 9 9 3. The last-selected device key will


blink twice.

3. Press VOL- once. The last-selected device key


will blink four times.

4. Repeat steps 1 through 3 for each device you


want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., CBL), pressing VOL+, VOL-,or MUTE, will control
only that device’s volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE: Performing these instructions will set inde-
pendent volume control for all programmed
devices.
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.

2. Enter 9 9 3. The last-selected device key will


blink twice.

3. Press VOL+ once. The last-selected device key


will blink four times.

www.urcsupport.com
13
Atlas 4A ENG.fm Page 14 Thursday, April 12, 2007 1:25 PM

Locking Volume Control To One Mode (Global


Volume Lock)
NOTE: The audio mode’s volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD
mode, you will control the audio device’s vol-
ume in all other modes (i.e., VCR,TV, or CBL).
This can be an advantage if, for example, you
always listen to home entertainment devices
through your receiver’s speakers.
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.

2. Enter 9 9 3. The last-selected device key will


blink twice.

3. Select a mode (e.g., TV or AUD) which you


want to use to control the volume. The
selected device key will blink twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.

PROGRAMMING ID LOCK
The Atlas 4-Device Universal Remote Control is locked
at the factory to operate your cable provider’s set top
box. However, if you have another brand or model of
cable converter or satellite service that you would like to
control, then you’ll need to perform the following steps
to unlock the ID Lock, enter a new manufacturer’s code,
and lock the ID Lock again.
1. Turn on the cable converter.
2. On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice.

3. Enter 9 8 2. The CBL key will blink four


times, indicating ID Lock is unlocked.

www.urcsupport.com
14
Atlas 4A ENG.fm Page 15 Thursday, April 12, 2007 1:25 PM

4. Perform the instructions under


“Programming Device Control” on page 8 to
program device control for the desired cable
converter or satellite receiver.
When you are done, perform steps 5 and 6 on
this page to again lock the cable ID Lock.
5. On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice.

6. Enter 9 8 2. The CBL key will blink twice,


indicating ID Lock is again locked.

PROGRAMMING THE MACRO KEY


The Atlas 4-Device Universal Remote Control includes
one macro key (located directly below the SETTINGS
key). The macro key allows you to set up key macros to
activate certain keys in a specific order. For example, you
can set up a key macro to change the channels on your
TV, raise or lower the volume, and start recording on
your VCR, all with the touch of one key. If you want to
change the macros stored in a previously-programmed
macro key, you’ll need to clear the key first (see
“Clearing a Macro Key” on page 16).
Programming the Macro Key
1. On the remote control, press and hold SETUP
until it blinks twice.

2. Enter 9 9 5. The SETUP key blinks twice.

3. Press the MACRO key once.


4. Press the key sequence you want to program
into the macro. For example, to turn on your
TV and raise its volume, press TV followed by
VOL+.

www.urcsupport.com
15
Atlas 4A ENG.fm Page 16 Thursday, April 12, 2007 1:25 PM

NOTE: You can program up to 15 key presses into one


macro.
5. Press and hold SETUP until it blinks twice.

6. To add another macro, repeat steps 1 through


5, substituting the new key sequence to be
added in step 4.
NOTE: Programming more than five macros on the
same macro key overwrites previous settings.
Clearing a Macro Key
1. On the remote control, press and hold SETUP
until it blinks twice.

2. Enter 9 9 5. The SETUP key blinks twice.

3. Press the MACRO key once.


4. Press and hold SETUP until it blinks twice.

This macro key is now clear and ready for


reprogramming (see “Programming the Macro Key” on
page 15). If desired, repeat these to clear another Tune-
In key.

USING THE MASTER POWER KEY


The Atlas 4-Device Universal Remote Control has a
unique feature that allows you to sequentially turn up to
five of your home entertainment devices on or off with a
single key press.
NOTE: MASTER POWER (PWR) only works in the CBL
mode. If it is not programmed, only the cable
converter will turn on or off. In any other
mode, pressing MASTER POWER (PWR) once
will turn the selected device on or off.
Programming the Master Power Key
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.

www.urcsupport.com
16
Atlas 4A ENG.fm Page 17 Thursday, April 12, 2007 1:25 PM

2. Enter 9 9 5. The last-selected device key


blinks twice.

3. Press PWR once.

4. For the first device you want in the power on


sequence, press a device key (e.g., CBL) once.
Then press PWR once. For the second device
in the power sequence, press its key once (e.g,
TV). Then press PWR.

5. Repeat step 4 up to four more times to add the


second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
a. Press CBL once.

b. Press and hold SETUP until the CBL key blinks


twice.

Using the Master Power Key


1. After programming, point the remote control
at the devices. Press CBL once.

2. Press PWR once to sequentially turn the


programmed home entertainment devices on
or off.

You will see the devices turn on or off according to the


programmed sequence.
Clearing the Master Power Key
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.

2. Enter 9 9 5. The last-selected device key


blinks twice.

www.urcsupport.com
17
Atlas 4A ENG.fm Page 18 Thursday, April 12, 2007 1:25 PM

3. Press and release PWR.

4. Press and hold SETUP until the CBL key blinks


twice.

RE-ASSIGNING DEVICE KEYS


The Atlas 4-Device Universal Remote Control can be set
up to control a second device of an already-assigned
type. For example, to have the unit control a TV, a Cable
Converter, and two audio devices (for example, two
audio receivers), re-assign the unused VCR key to
operate the second audio device as follows:
NOTE: VCR is preset at the factory to control an RCA
VCR. Performing the steps below will over-
write those settings.
1. On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.

2. Enter 9 9 2. The VCR key will blink twice.

3. Press AUD once, then press VCR once. The VCR


key will blink twice.

The VCR key is now ready to be programmed for your


second audio device. See “Programming Device
Control” on page 8. To re-assign other device keys,
repeat these and substitute the key sequence using the
following chart:
NOTE: Only one device can be assigned to an unused
device key at a time.
To Re-Assign Perform Key Sequence
VCR as 2nd VCRÆSETUPÆ9Æ9Æ2ÆAUDÆVCR
AUD key
VCR as 2nd VCRÆSETUPÆ9Æ9Æ2ÆTVÆVCR
TV key
VCR as 2nd VCRÆSETUPÆ9Æ9Æ2ÆCBLÆVCR
CBL key

www.urcsupport.com
18
Atlas 4A ENG.fm Page 19 Thursday, April 12, 2007 1:25 PM

To Re-Assign Perform Key Sequence


VCR back to VCRÆSETUPÆ9Æ9Æ2ÆVCRÆVCR
VCR

To re-assign another unused device key, substitute it for


the VCR key above and then perform the sequence. For
example, to re-assign an unused AUD key as a second TV
key, perform AUDÆSETUPÆ9Æ9Æ2ÆTVÆAUD.
When a re-assignment is done, the selected device key
(e.g., AUD) will blink twice to confirm your choice. At
that time, you will need to program device control (see
“Programming Device Control” on page 8).

TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a
key.
SOLUTION: Replace the batteries with two (2) new AA
batteries (see “Installing Batteries” on page 7).
PROBLEM: Device key blinks when you press a key, but
home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control
at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home
entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand
being set up. Make sure all devices can be operated with
an infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some
combo units may require both a TV code and a VCR
code for full operation (see page 10).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing
Volume Lock” on page 12.
PROBLEM: PLAY and STOP keys do not work on a
Motorola DCT-2000 cable converter.
SOLUTION: Re-program the CBL key for cable code 0476
(see “Programming Device Control” on page 8).
PROBLEM: Tried Search Method and still could not find
a working code.
SOLUTION: Try the Search Method again after clearing
out the device key as follows:
a. Press and hold SETUP until device key blinks twice.
b. Enter 9 9 2.

www.urcsupport.com
19
Atlas 4A ENG.fm Page 20 Thursday, April 12, 2007 1:25 PM

c. Press and release the device key to be cleared twice.


PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 0032. For Sharp, use
TV code 0093 and VCR code 0048.

ADDITIONAL INFORMATION
This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to your Atlas 4-Device Universal Remote
Control.
• For help via the Internet, visit us at:
www.urcsupport.com
©Copyright 2006 by Universal Electronics Inc. No part of this
publication may be reproduced, transmitted, transcribed,
stored in any retrieval system, or translated to any language, in
any form or by any means, electronic, mechanical, magnetic,
optical, manual, or otherwise, without prior written
permission of Universal Electronics Inc.
M4AB06 4/07

www.urcsupport.com
20
Atlas 4A ENG.fm Page 21 Thursday, April 12, 2007 1:25 PM

ÍNDICE

Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Características y Funciones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Tabla de Botones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Tabla de Dispositivos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Instalación de Baterías . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Programación del Control de Dispositivos. . . . . . . . . . . . . . . . . . . . 28
Búsqueda de Su Código . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Verificación de los Códigos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Programación del Bloqueo del Control de Canales. . . . . . . . . . . . . 31
Desbloqueo del Control de Canales . . . . . . . . . . . . . . . . . . . . 31
Bloqueo del Control de Canales de CBL. . . . . . . . . . . . . . . . . 32
Cambio del Bloqueo del Volumen. . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Desbloqueo del Control de Volumen para un Solo Aparato
(Desbloqueo de Volumen Individual). . . . . . . . . . . . . . . . . 32
Desbloquear Todos los Controles de Volumen (Desbloqueo de
Volumen Global). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Bloquear el Control de Volumen en una Modalidad (Bloqueo de
Volumen Global). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Programación del Bloqueo de Id de Cable . . . . . . . . . . . . . . . . . . . 34
Programación del Botón Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Programación del Botón Macro . . . . . . . . . . . . . . . . . . . . . . . 35
Borrado de un Botón Macro . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Uso del Botón de Encendido Maestro. . . . . . . . . . . . . . . . . . . . . . . . 37
Uso del Botón de Encendido Maestro . . . . . . . . . . . . . . . . . . 37
Uso del Botón de Encendido Maestro . . . . . . . . . . . . . . . . . . 37
Borrado del Botón de Encendido Maestro . . . . . . . . . . . . . . . 37
Reasignación de Botones de Dispositivo . . . . . . . . . . . . . . . . . . . . . 38
Solución de Problemas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Información Adicional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Manufacturer’s Codes (Códigos de Fabricante) . . . . . . . . . . . . . . . 41
Códigos de configuración para los amplificadores de audio 41
Códigos de configuración para los receptores de audio . . . 41
Códigos de configuración para los accesorios de audio . . . 44
Códigos de configuración para los convertidores/cajas de
cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Códigos de configuración para reproductores de DVD . . . . . 46
Códigos de configuración para grabadoras de DVD . . . . . . . 51
Códigos de configuración para conjuntos de DVD . . . . . . . . 51
Receptores de satélite y sistemas de DVR/PVR. . . . . . . . . . . 52
Códigos de configuración para los receptores de satélite . . 53
Códigos de configuración para Televisor . . . . . . . . . . . . . . . 54
Setup Codes for TVs (DLP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Códigos de configuración para Televisor (HDTV). . . . . . . . . . 62
Códigos de configuración para Televisor (LCD). . . . . . . . . . . 63
Códigos de configuración para conjuntos de TV/DVD . . . . . . 66
Códigos de configuración para conjuntos de TV/VCR . . . . . . 66
Códigos de configuración para conjuntos de TV/VCR/DVD . . 68
Códigos de configuración para VCR . . . . . . . . . . . . . . . . . . . 69

www.urcsupport.com
21
Atlas 4A ENG.fm Page 22 Thursday, April 12, 2007 1:25 PM

INTRODUCCIÓN
El control remoto del Control Remoto Universal Atlas 4-
Device por Universal Electronics es nuestro control
remoto universal de generación más reciente. La
tecnología sofisticada con la que cuenta le permite
consolidar hasta cinco de los controles remotos
originales de entretenimiento del hogar en un producto
que fácil de utilizar. Además, cuenta con características
avanzadas como:
• Control preprogramado para poner en
funcionamiento el convertidor de cable que le
proporciona su proveedor de servicio de cable
• Botón programable de encendido maestro para el
control maestro de encendido/apagado de su equipo
de entretenimiento en el hogar con una sola
pulsación
• El botón macro le permite programar botones
macros para activar ciertos botones en un orden
específicor
• Bloqueo de canales para bloquear la selección de
canales únicamente para el convertidor de cables
• Bloqueo de volumen para bloquear los controles de
volumen a un modo o modos individuales
• Reasignación de botones de dispositivo para
controlar de manera remota un segundo dispositivo
(duplicado)
• Búsqueda de código para ayudar al control de
programas de componentes antiguos o
descontinuados
• Botones codificados por color para localizar
rápidamente las funciones más utilizadas
• Biblioteca de códigos para dispositivos de vídeo y
audio más conocidos
Es necesario instalar las baterías que se incluyen antes
de utilizar el producto y también realizar alguna
programación para poner en funcionamiento los
dispositivos específicos de entretenimiento en el hogar
que desea controlar.
Siga las instrucciones que se describen en este manual
para configurar la unidad y luego empezar a disfrutar de
su nuevo control remoto y servicio de cable.

www.urcsupport.com
22
Atlas 4A ENG.fm Page 23 Thursday, April 12, 2007 1:25 PM

CARACTERÍSTICAS Y FUNCIONES
Use la ilustración de abajo para localizar las opciones en
el Control Remoto Universal Atlas 4-Device y luego
estudie la Tabla de Botones (en las próximas tres
páginas) para aprender cómo funcionan.
Para saber qué tipo de dispositivos pueden ser
controlados por cada botón de dispositivo después de la
programación, vea “Tabla de Dispositivos” en la
página 26.

www.urcsupport.com
23
Atlas 4A ENG.fm Page 24 Thursday, April 12, 2007 1:25 PM

Tabla de Botones
Botón Función
Use SETUP (Configuración) para todas
las secuencias de programación. Úselo
también para encender y apagar la
iluminación de fondo,si es pertinente.
Presione PWR (Encendido) una vez para
encender o apagar un dispositivo
doméstico.
Para el control Master Power
(Encendido maestro) vea “USO del
Botón de Encendido Maestro” en la
página 36.
Presione AUD, VCR, TV o CBL para
seleccionar un dispositivo doméstico
que quiera controlar. También vea la
“Tabla de Dispositivos” en la pagina 26.
Cada botón de dispositivo tiene un LED
incorporado (luz roja) que parpadea
cuando es seleccionado e indica que el
control remoto está funcionando y
que(después de la programación) está
enviando señales.
Use GUIDE (Guía) para desplegar la guía
del programa.
Presione SETTINGS (Configuraciones)
una vez para exhibir los servicios
interactivos disponibles.

Use INFO para exhibir el canal actual y


la información del programa.
Use DAY+ (o DAY-) (Día + o Día -) para
adelantar (o para retroceder) un día en
la guía de programa de su convertidor
de cable.
Use los botones del cursor para mover el
cursor en la guía del programa y
pantallas del menú y para navegar en el
servicio interactivo.
Use OK/SELECT (Aceptar/seleccionar)
para elegir opciones, eventos PPV y
para sintonizar programas desde la guía
del programa.
Use PAGE+ (o PAGE-) (Página + o
Página -) para adelantar (o retroceder)
páginas en las pantallas del menú y la
guía de programa.

www.urcsupport.com
24
Atlas 4A ENG.fm Page 25 Thursday, April 12, 2007 1:25 PM

Botón Función
Use EXIT (Salir) para salir del menú y
guía de su convertidor de cable.
Use A, B o C para acceder a las opciones
de cable adicionales (vea el manual de
su convertidor de cable).
Use VOL+ (o VOL-) para subir (o bajar)
el volumen del sonido.

Use FAV (Favoritos) para recorrer sus


canales favoritos en el convertidor de
cable.
Use CH+ (o CH-) para subir (o bajar) el
canal.
Para los reproductores de DVD, use
estos botones para saltar, adelantar(o
retroceder) capítulos.
Para amplificadores /receptores, use
estos botones para subir (o bajar) la
estación prefijada.
Presione MUTE (Silencioso) una vez
para desactivar y activar el sonido.
Presione LAST (Último) una vez para
volver al último canal.
Reservado para su uso como botón
Macro (vea “Programación del Botón
Macro” en la página 35).
En todas las modalidades excepto CBL,
use REW (rebobinar), PLAY
(reproducir), FFWD (adelantar), STOP
(detener) y PAUSE (pausa) para
controlar su VCR, DVD o un PVR
(después de seleccionar el dispositivo
deseado). Para grabar en la modalidad
VCR, presione REC dos veces.
En la modalidad CBL, use esos botones
para controlar las funciones DVR/PVR
de la caja de cable o satélite.
Use los botones numerados (1-9 y 0)
para sintonizar los canales
directamente (ejemplo: 09).
Para amplificadores /receptores, use los
botones numerados para seleccionar las
entradas del 1 a 10.

www.urcsupport.com
25
Atlas 4A ENG.fm Page 26 Thursday, April 12, 2007 1:25 PM

Botón Función
Presione ENTER una vez para ingresar el
número de un canal en algunos
sistemas de cable.
Presione STAR como un botón opcional
en la botonera numerada.
Use BYPASS para controlar la función
Bypass del set-top box.
Presione TV/VCR para cambiar la fuente
de orígen de su video (por ejemplo, de
TV a VCR).

Tabla de Dispositivos
NOTA: Por favor, remítase a la tabla de abajo cuando
ejecute las instrucciones en “Programación
del Control de Dispositivos” en la página 28 o
“Búsqueda de Su Código” en la página 29.
Después de la programación, el Control Remoto
Universal Atlas 4-Device será capaz de controlar los
siguientes tipos de dispositivo:
Botón de
Controla este tipo de dispositivos
Dispositivo
VCR, conjunto de TV/VCR, PVR o
reproductor de DVD adicional
Amplificador de audio, sintonizador,
receptor o accesorios de audio
Televisor

Caja de cable (convertidor), receptor de


satélite o accesorios de video

www.urcsupport.com
26
Atlas 4A ENG.fm Page 27 Thursday, April 12, 2007 1:25 PM

INSTALACIÓN DE BATERÍAS

3
1. En la parte de atrás del control remoto
presione la aleta y levante la tapa de las
baterías.
2. Localice las dos (2) baterías AA que se
incluyen. Haga coincidir las marcas + y - con
aquellas en el compartimiento y luego
insértelas.
3. Alinee los picos de la tapa con los agujeros del
compartimiento y presione la tapa en su lugar.
La aleta debe hacer un sonido cuando la tapa
se cierre.
4. Pruebe el control remoto presionando
cualquier botón de modalidad (ej: TV). Si las
baterías fueron insertadas correctamente, el
LED (luz roja) parpadeará una vez.
NOTA: Cuando las baterías necesitan ser remplaza-
das el control remoto dejará de operar. Cam-
bie las baterías y la unidad será restaurada a
su funcionalidad plena, con sus ajustes favori-
tos.

www.urcsupport.com
27
Atlas 4A ENG.fm Page 28 Thursday, April 12, 2007 1:25 PM

PROGRAMACIÓN DEL CONTROL DE


DISPOSITIVOS
El Control Remoto Universal Atlas 4-Device está
preprogramado para operar la caja de cable
(convertidor) provisto por su sistema de cable, una TV
RCA, un reproductor de DVD Toshiba y un receptor de
audio Pioneer. Para controlar otros dispositivos que no
sean las marcas por defecto, ejecute los siguientes pasos;
si no es así, salte esta sección.
NOTA: Si tiene otra marca de convertidor de cable o
un receptor de satélite que le gustaría contro-
lar, tendrá que abrir la Identificación de Blo-
queo del cable antes de cambiar el código del
convertidor (vea “Programación del Bloqueo
de Id de Cable” en la página 34).
1. Encienda un aparato y, si es posible, inserte
un medio de video (ej: un cassette o un
disco).
NOTA: Por favor, lea los pasos 2-4 por completo antes
de proceder. Subraye o anote los códigos y dis-
positivo que desee programar antes de contin-
uar con el 2do. paso.
2. En el control remoto, presione un botón de
dispositivo una vez (es decir, AUD, VCR, TV o
CBL); parpadeará una vez. Luego presione y
sostenga SETUP hasta que la modalidad
seleccionada parpardee dos veces.
3. Use los "Códigos de Fabricante"(comienzan
en la página 41) para localizar el tipo de
dispositivo y el nombre de la marca y luego
ingresar el primer código de cuatro dígitos de
su dispositivo. Si es ejecutado correctamente,
la modalidad seleccionada parpadeará dos
veces.
NOTA: Si la modalidad seleccionada hace un par-
padeo largo, la entrada es inválida. Repita los
pasos 2 y 3 e intente ingresar el mismo código
de nuevo.
4. Apunte el control remoto hacia el aparato y
presione PWR una vez. El dispositivo debería
apagarse. Si no lo hace, repita los pasos 2 y 3,
probando cada código con su marca hasta que
encuentre uno que funcione.
Si aún no responde, intente buscar el código
(vea “Búsqueda de Su Código” en la
página 29).
NOTA: Si el dispositivo no tiene un botón PWR
(encendido), presione el botón (Repro-
ducir).

www.urcsupport.com
28
Atlas 4A ENG.fm Page 29 Thursday, April 12, 2007 1:25 PM

5. Repita los pasos 1-4 para cada dispositivo que


quiera operar con el control remoto . Para
referencia futura, anote el código que
funciona con cada dispositivo en los casilleros
de la página siguiente.
Código de VCR

Tipo de dispositivo: __________________


Código de DVD

Tipo de dispositivo: __________________


Código de AUD

Código de CBL

Tipo de dispositivo: __________________


Código de TV

Tipo de dispositivo: __________________

BÚSQUEDA DE SU CÓDIGO
Si su dispositivo doméstico no responde al Control
Remoto Universal Atlas 4-Device después de probar
todos los códigos listados para su marca, o si su marca
no está en la lista, pruebe buscar su código.
Por ejemplo, para buscar el código para su TV:
1. Encienda su TV.
2. En el control remoto, presione TV una vez;
papadeará una vez. Luego presione y sostenga
SETUP hasta que el botón TV parpadee dos
veces.

www.urcsupport.com
29
Atlas 4A ENG.fm Page 30 Thursday, April 12, 2007 1:25 PM

3. Ingrese 9 9 1. El botón TV parpadeará una


vez.

4. Apunte el control remoto hacia la TV y


presione PWR una vez.

5. Presione y suelte el botón CH+ repetidamente.


Luego deténgase cuando la TV se apague.

NOTA: En el modo de búsqueda, el control remoto


enviará códigos IR desde su biblioteca al dis-
positivo seleccionado, empezando primero
con el código más utilizado.
6. Presione PWR. La TV debería encenderse.
Luego presione SETUP para guardar el código.

NOTA: Si la TV no se enciende durante el paso 6,


entonces presione y suelte CH- lentamente
para retroceder a los otros códigos. Luego
presione SETUP cuando la TV se encienda.
7. Para buscar los códigos de sus otros
dispositivos, repita los pasos 1-6, pero cambie
el botón correspondiente al dispositivo que
está buscando (ej: AUD, VCR o CBL).

VERIFICACIÓN DE LOS CÓDIGOS


Si ajustó el Control Remoto Universal Atlas 4-Device
buscando el código de su dispositivo (en la página
anterior), podrá tener que averiguar qué código de
cuatro dígitos está operando su equipo.
Por ejemplo, para averiguar qué código está operando su
TV:
1. En el control remoto, presione TV una vez;
parpadeará una vez. Luego presione y
sostenga SETUP hasta que el botón TV
parpadee dos veces.

2. Ingrese 9 9 0. El botón TV parpadeará dos


veces.

www.urcsupport.com
30
Atlas 4A ENG.fm Page 31 Thursday, April 12, 2007 1:25 PM

3. Para ver el código para el primer dígito,


presione 1 una vez. Cuente el número de veces
que el botón TV parpadea (ej: 3 parpadeos =
3)y anote el número en el extremo izquierdo
del casillero de Código de TV en la página 10.
NOTA: Si el dígito del código es 0, el botón de modo
seleccionado no brillará intermitentemente.
4. Repita el paso 3 tres veces más para los dígitos
restantes. Use 2 para el segundo dígito, 3 para
el tercero y 4 para el cuarto dígito. Termine de
anotar el código en los casilleros del Código
de TV en la página 29.
5. Para verificar otros códigos, repita los pasos
1-4, pero cambie el botón correspondiente
con el del dispositivo que está verificando (ej:
AUD, VCR o CBL). Anote los códigos en los
casilleros correspondientes en la página 29.

PROGRAMACIÓN DEL BLOQUEO DEL CONTROL


DE CANALES
Por defecto, la capacidad de control de canales del
control remoto están bloqueadas por el convertidor de
cable. Los botones afectados van del 1 al 0, CH+, CH- y
LAST (último). Esto garantizará que usted no cambie un
canal en su TV o VCR sin darse cuenta. Sin embargo,
usted puede desactivar esta opción para permitir el
acceso completo a estos botones en las modalidades TV
y VCR.
*NOTA: Esta opción no afecta el modo AUD.
Desbloqueo del Control de Canales
1. En el control remoto, presione CBL una vez;
parpadeará una vez. Presione y sostenga
SETUP hasta que el botón CBL parpadee dos
veces.

2. Ingrese 9 7 3. El botón CBL parpadeará dos


veces.

3. Presione CH- una vez . El botón CBL


parpadeará cuatro veces.

Ahora el control remoto tendrá capacidad de control de


canales de TV y VCR mientras esté en la modalidad TV
o VCR.

www.urcsupport.com
31
Atlas 4A ENG.fm Page 32 Thursday, April 12, 2007 1:25 PM

Bloqueo del Control de Canales de CBL


1. En el control remoto presione CBL una vez;
parpadeará una vez. Presione y sostenga
SETUP hasta que el botón CBL parpadee dos
veces.

2. Ingrese 9 7 3.El botón CBL parpadeará dos


veces.

3. Presione CH+ una vez. El botón CBL


parpadeará dos veces.

Ahora, independientemente del botón que seleccione


(excepto AUD), los botones de canal sólo cambiarán
canales en su convertidor de cable.

CAMBIO DEL BLOQUEO DEL VOLUMEN


El bloqueo del volumen le permite controlar el volumen
a través del dispositivo identificado como poseedor de
su altoparlante(s) principal(es), independientemente de
la modalidad que esté usando. En el Control Remoto
Universal Atlas 4-Device, el Bloqueo de Volumen Global
está ajustado para TV, para que usted pueda controlar el
volumen de la TV mientras esté en modo VCR, TV o CBL.
Usted puede ejecutar el Desbloqueo de Volumen
Individual en un dispositivo seleccionado para que su
control de volumen pueda operar independientemente.
NOTA: Los controles de volumen de la modalidad
audio (AUD) están activos independiente-
mente de los ajustes del Bloqueo de Volumen.
Sin embargo, si usted bloquea los controles de
volumen para el modo AUD, tendrá control del
volumen del dispositivo de audio en todos las
otras modalidades (es decir, VCR, TV, y CBL).
Esto puede ser una ventaja si, por ejemplo,
usted siempre escucha a dispositivos del
hogar a través de los altoparlantes de sus
receptores.
Desbloqueo del Control de Volumen para un Solo
Aparato (Desbloqueo de Volumen Individual)
1. Suponiendo que el Bloqueo de Volumen está
activo, seleccione una modalidad en el control
remoto que quiera desbloquear (ej: CBL)y
presiónelo una vez. Luego, presione y
sostenga SETUP hasta que el botón del
dispositivo parapadee dos veces.

www.urcsupport.com
32
Atlas 4A ENG.fm Page 33 Thursday, April 12, 2007 1:25 PM

2. Ingrese 9 9 3. El botón del dispositivo


seleccionado por última vez parpadeará dos
veces.

3. Presione VOL- una vez. El botón del


dispositivo seleccionado por última vez
parpadeará cuatro veces.

4. Repita los pasos 1-3 para cada dispositivo


cuyo volumen quiera desbloquear.
Ahora, después de que seleccione un dispositivo cuyo
volumen está desbloqueado (ej: CBL), presionando
VOL+, VOL- o MUTE, usted controlará el volumen de sólo
aquel dispositivo.
Desbloquear Todos los Controles de Volumen
(Desbloqueo de Volumen Global)
NOTA: Ejecutar estas instrucciones ajustará el control
de volumen independiente para todos los dis-
positivos programados.
1. En el control remoto, presione y sostenga
SETUP hasta que el botón del dispositivo
seleccionado último parapadee dos veces.

2. Ingrese 9 9 3. El botón del dispositivo


seleccionado último parpadeará dos veces.

3. Presione VOL+ una vez. El botón del


dispositivo seleccionado último parpadeará
cuatro veces.

Bloquear el Control de Volumen en una Modalidad


(Bloqueo de Volumen Global)
NOTA: Los controles de volumen de la modalidad de
audio están activos independientemente de
los ajustes del Bloqueo de Volumen. Sin
embargo, si bloquea los controles de volumen
en el modo AUD, usted controlará el volumen
del dispositivo de audio en todos las otras
modalidades (es decir, VCR, TV o CBL). Esto
puede ser una ventaja si, por ejemplo, usted
siempre escucha sus dispositivos de entreten-

www.urcsupport.com
33
Atlas 4A ENG.fm Page 34 Thursday, April 12, 2007 1:25 PM

imiento a través de los altoparlantes de sus


receptores.
1. En el control remoto, presione y sostenga
SETUP hasta que el botón seleccionado último
parpadee dos veces.

2. Ingrese 9 9 3. El botón seleccionado último


parpadeará dos veces.

3. Seleccione un modo (ej: TV o AUD) que usted


quiera usar para controlar el volumen. EL
botón seleccionado parpadeará dos veces
Ahora, cuando presione VOL+, VOL- o MUTE, el volumen
del dispositivo seleccionado (ej: TV) estará controlado
independientemente del modo.

PROGRAMACIÓN DEL BLOQUEO DE ID DE


CABLE
El Control Remoto Universal Atlas 4-Device está
bloqueado desde fábrica para operar su caja de cable.
Sin embargo, si usted tiene otra marca o modelo de
convertidor de cable o servicio de satélite que le gustaría
controlar, entonces deberá ejecutar los siguientes pasos
para desbloquear la Identificación de Bloqueo, ingresar
un nuevo código de manufactura y bloquear la
Identificación de Bloqueo de nuevo.
1. Encienda el convertidor de cable.
2. En el control remoto, presione CBL una vez;
parpadeará una vez. Luego presione y
sostenga SETUP hasta que el botón CBL
parpadee dos veces.

3. Ingrese 9 8 2. El botón CBL parpadeará


cuatro veces, indicando que la Identificación
de Bloqueo está desbloqueada.

4. Ejecute las instrucciones de “Programación


del Control de Dispositivos” en la página 28
para programar el control del dispositivo para
el convertidor de cable o receptor de satélite
deseado.

www.urcsupport.com
34
Atlas 4A ENG.fm Page 35 Thursday, April 12, 2007 1:25 PM

5. Cuando haya terminado, ejecute los pasos 5 y


6 en esta página para bloquear de nuevo la
Identificación del cable.
6. En el control remoto, presione CBL una vez;
parpadeará una vez. Luego presione y
sostenga SETUP hasta que el botón CBL
parpadee dos veces.

7. Ingrese 9 8 2. El botón CBL parpadeará dos


veces, indicando que la Identificación de
Bloqueo está nuevamente activada.

PROGRAMACIÓN DEL BOTÓN MACRO


El Control Remoto Universal Atlas 4-Device incluye un
botón macro (localizado directamente bajo el botón
SETTINGS). El botón macro le permite programar
botones macros para activar ciertos botones en un
orden específico. Por ejemplo, usted puede ajustar un
botón macro para cambiar los canales de su TV, subir o
bajar el volumen y comenzar a grabar en su VCR, todo
con el toque de un botón. Si usted desea cambiar los
macros almacenados en un botón macro previamente
programado, tendrá que borrar el botón primero (vea
“Borrado de un Botón Macro” en la página 36).
Programación del Botón Macro
1. En el control remoto, presione y sostenga
SETUP hasta que parpadee dos veces.

2. Ingrese 9 9 5. El botón SETUP parpadeará


dos veces.

3. Presione el botón MACRO una vez.


4. Presione la secuencia de botones que usted
desea programar en el macro. Por ejemplo,
para encender su TV y subir su volumen
presione TV seguido de VOL+.

www.urcsupport.com
35
Atlas 4A ENG.fm Page 36 Thursday, April 12, 2007 1:25 PM

NOTA: Puede programar hasta 15 botones en un


macro..
5. Presione y sostenga SETUP hasta que
parapadee dos veces.

6. Para agregar otro macro, repita los pasos 1-5,


sustituyendo la nueva secuencia de botones
que se agregará en el paso 4.
NOTA: Programar más de cinco macros en el mismo
botón macro borra ajustes previos.
Borrado de un Botón Macro
1. En el control remoto, presione y sostenga
SETUP hasta que parpadee dos veces.

2. Ingrese 9 9 5. El botón SETUP parpadeará


dos veces.

3. Presione el botón MACRO una vez.


4. Presione y sostenga SETUP hasta que
parpadee dos veces.

Este botón macro ha sido ahora borrado y está listo para


ser reprogramado (vea “Programación del Botón
Macro” en la página 35). Si lo desea, repita estos pasos
para borrar otro botón de canal preprogramado.

USO DEL BOTÓN DE ENCENDIDO MAESTRO


El Control Remoto Universal Atlas 4-Device tiene una
opción única que le permite encender o apagar en
secuencia hasta cinco de sus dispositivos con presionar
sólo un botón.
NOTA: El ENCENDIDO MAESTRO (PWR) únicamente
funciona en el modo CBL. Si no está progra-
mado, únicamente se encenderá o apagará el
convertidor de cable. En cualquier otro modo,
la presión del ENCENDIDO MAESTRO (PWR)
una vez encenderá o apagará el dispositivo
seleccionado.

www.urcsupport.com
36
Atlas 4A ENG.fm Page 37 Thursday, April 12, 2007 1:25 PM

Programación del Botón de Encendido Maestro


1. En el control remoto, presione y sostenga
SETUP hasta que el botón que haya
seleccionado último parpadee dos veces.
2. Ingrese 9 9 5. El botón de dispositivo
seleccionado último parpadeará dos veces.

3. Presione PWR una vez para encender o apagar


los dispositivos programados.

4. For the first device you want in the power on


sequence, press a device key (e.g., CBL) once.
Then press PWR once. For the second device
in the power sequence, press its key once (e.g,
TV). Then press PWR.

5. Repita el paso 4 hasta cuatro veces más para


agregar el segundo, tercero, cuarto y quinto
dispositivo, como usted quiera.
6. Para guardar los ajustes y salir del programa:
a. Presione CBL una vez.

b. Presione y sostenga SETUP hasta que el botón


CBL parpadee dos veces.

Uso del Botón de Encendido Maestro


1. Después de programar, apunte el control
remoto hacia los dispositivos. Presione CBL
una vez.
2. Presione PWR una vez para encender o apagar
los dispositivos programados.

Usted verá los dispositivos encenderse o apagarse de


acuerdo con la secuencia programada.
Borrado del Botón de Encendido Maestro
1. En el control remoto, presione y sostenga
SETUP hasta que el botón de dispositivo
seleccionado por última vez parpadee dos
veces.

www.urcsupport.com
37
Atlas 4A ENG.fm Page 38 Thursday, April 12, 2007 1:25 PM

2. Ingrese 9 9 5. El botón de dispositivo


seleccionado por última vez parpadeará dos
veces.

3. Presione y suelte PWR.

4. Presione y sostenga SETUP hasta que el botón


CBL parpadee dos veces.

REASIGNACIÓN DE BOTONES DE DISPOSITIVO


El Control Remoto Universal Atlas 4-Device puede ser
ajustado para controlar un segundo dispositivo de un
tipo ya asignado. Por ejemplo, para que la unidad
controle una TV, un convertidor de cable y dos
dispositivos de audio (por ejemplo, dos receptores de
audio), reasigne el botón VCR no usado para operar el
segundo dispositivo de audio como sigue:
NOTA: VCR está prefijado desde fábrica para contro-
lar un VCR marca RCA. Al ejecutar los pasos
de abajo borrará esos ajustes.
1. En el control remoto, presione VCR una vez;
parpadeará una vez. Luego presione y
sostenga SETUP hasta que el botón VCR
parpadee dos veces.

2. Ingrese 9 9 2. El botón VCR parpadeará dos


veces

3. Presione AUD una vez, luego presione VCR una


vez. El botón VCR parpadeará dos veces.

El botón VCR está ahora listo para ser programado para


su segundo dispositivo de audio. Vea “Programación del
Control de Dispositivos” en la página 28. Para reasignar
otros botones de dispositivos, repita estos pasos y
cambie la secuencia de botones siguiendo la siguiente
tabla:

www.urcsupport.com
38
Atlas 4A ENG.fm Page 39 Thursday, April 12, 2007 1:25 PM

NOTA: Sólo un dispositivo por vez puede ser asig-


nado a un botón sin uso.
Para
Ejecute la Secuencia de Botones
Reasignar
VCR como 2º VCRÆSETUPÆ9Æ9Æ2ÆAUDÆVCR
botón AUD
VCR como 2º VCRÆSETUPÆ9Æ9Æ2ÆTVÆVCR
botón TV
VCR como 2º VCRÆSETUPÆ9Æ9Æ2ÆCBLÆVCR
botón CBL
VCR de vuelta VCRÆSETUPÆ9Æ9Æ2ÆVCRÆVCR
a VCR

Para reasignar otro botón sin uso, sustitúyalo con el


botón VCR de arriba y luego ejecute la secuencia. Por
ejemplo, para reasignar un botón AUD sin uso como un
segundo botón de TV ejecute
AUDÆSETUPÆ9Æ9Æ2ÆTVÆAUD.
Cuando una reasignación es realizada, el botón de
dispositivo seleccionado (ej: AUD) parpadeará dos veces
para confirmar su opción. En ese momentó usted
deberá programar el control de dispositivos (vea
“Programación del Control de Dispositivos” en la
página 28).

SOLUCIÓN DE PROBLEMAS
PROBLEMA: El botón del dispositivo no brilla
intermitentemente cuando presiona un botón
SOLUCIÓN: Reemplace las baterías con dos (2) baterías
AA nuevas (consulte "Instalación de baterías" en la
página 27).
PROBLEMA: El botón del dispositivo brilla
intermitentemente cuando presiona un botón, pero el
dispositivo del entretenimiento del hogar no responde.
SOLUCIÓN: Asegúrese de que esté apuntando el control
remoto a su dispositivo de entretenimiento del hogar y
que esté a quince pies del dispositivo que intenta
controlar.
PROBLEMA: El control remoto no controla los
dispositivos de entretenimiento del hogar o los
comandos no funcionan correctamente.
SOLUCIÓN: Intente todos los códigos enumerados para
la marca del dispositivo que está configurando.
Asegúrese de que todos los dispositivos se puedan poner
en funcionamiento por medio de un control remoto
infrarrojo.

www.urcsupport.com
39
Atlas 4A ENG.fm Page 40 Thursday, April 12, 2007 1:25 PM

PROBLEMA: El conjunto de TV/VCR no responde


adecuadamente.
SOLUCIÓN: Utilice los códigos de VCR para su marca. Es
posible que algunas unidades combinadas necesiten un
código de televisor y un código de VCR para un
funcionamiento completo (consulte la página 69).
PROBLEMA: No hay volumen en un segundo televisor.
SOLUCIÓN: Siga las instrucciones que se encuentran en
“Cambio del Bloqueo del Volumen” en la página 32.
PROBLEMA: Los botones PLAY (Reproducir) y STOP
(Detener) no funcionan en un convertidor de cable
Motorola DCT-2000.
SOLUCIÓN: Vuelva a programar el botón CBL para el
código de cable 0476 (consulte "Programación de
control de dispositivo" en la página “Programación del
Control de Dispositivos” en la pagina 28).
PROBLEMA: Ya llevó a cabo el método de búsqueda y
todavía no encuentra un código que funcione.
SOLUCIÓN: Lleve a cabo de nuevo el método de
búsqueda después de borrar el botón del dispositivo tal
y como se muestra:
a. Mantenga presionado SETUP (Configuración)
hasta que el botón del dispositivo brille
intermitentemente dos veces..
b. Ingrese 9 9 2.
c. Presione y suelte dos veces el botón del dispositivo
que va a borrar.
PROBLEMA: El control remoto no enciende un conjunto
de TV/VCR Sony o Sharp.
SOLUCIÓN: Para encender estos productos es necesario
programar los códigos de TV en el control remoto. Para
Sony, utilice el código de TV 0000 y el código VCR 0032.
Para Sharp, utilice el código de TV 0093 y el código de
VCR 0048.

INFORMACIÓN ADICIONAL
Este producto no tiene ninguna parte a la que el usuario le
pueda dar servicio. La apertura de la caja, excepto la cubierta
de la batería, puede ocasionar daño permanente en su Control
Remoto Universal Atlas 4-Device.
• Para obtener ayuda por medio de Internet, visítenos en:
www.urcsupport.com
©Copyright 2006 por Universal Electronics Inc. No se puede
reproducir, transmitir, transcribir, almacenar en ningún
sistema de recuperación o traducir a ningún idioma ninguna
parte de esta publicación, de ninguna forma o por ningún
medio, electrónico, mecánico, magnético, óptico, manual o
cualquier otro, sin previa autorización escrita de Universal
Electronics Inc.
M4AB06 4/07

www.urcsupport.com
40
Atlas 4A ENG.fm Page 41 Thursday, April 12, 2007 1:25 PM

MANUFACTURER’S CODES (CÓDIGOS DE


FABRICANTE)

Setup Codes for Audio Amplifiers


Códigos de configuración para los amplificadores de
audio
Adcom 0577, 1100
Bose 0674
Durabrand 1561
Elan 0647
GE 0078
Harman/Kardon 0892
JVC 0331
Left Coast 0892
Lenoxx 1561
Luxman 0165
Marantz 0892, 0321
McIntosh 0251
Nakamichi 0321
NEC 0264
Optimus 0395, 0823
Parasound 0246
Philips 0892
Pioneer 0823
Polk Audio 0892
RCA 0823
Realistic 0395
Sansui 0321
Shure 0264
Sony 0689, 0815, 1126
Soundesign 0078, 0211
Victor 0331
Wards 0078, 0211
Yamaha 0354, 0133

Setup Codes for Audio Receivers


Códigos de configuración para los receptores de
audio
ADC 0531
Aiwa 1405, 0189, 0121, 0405,
1243, 1388, 1641

www.urcsupport.com
41
Atlas 4A ENG.fm Page 42 Thursday, April 12, 2007 1:25 PM

Akai 1512
Alco 1390
Amphion Media Works 1563, 1615
AMW 1563, 1615
Anam 1609, 1074
Apex Digital 1257, 1430, 1774
Arcam 1120
Audiotronic 1189
Audiovox 1390, 1627
B&K 0701, 0820, 0840
BK 0702
Bose 1229, 1629, 1841, 1933
Cambridge Soundworks 1370
Capetronic 0531
Carver 1189, 0189
Classic 1352
Coby 1389
Curtis Mathes 0080
Daewoo 1250
Delphi 1414
Denon 1360, 0004, 1142
Fisher 1801
Gateway 1517
Go Video 1532
Harman/Kardon 0110, 0189, 0891, 1304,
1306
Hitachi 1801
Integra 0135, 1298, 1320
JBL 0110, 1306
JVC 1374, 1495, 1811, 1871
Kenwood 1313, 1570, 1569, 0186
KLH 1390, 1412, 1428
Koss 1366, 1497
Lasonic 1798
LG 1293
Linn 0189
Liquid Video 1497
Magnavox 1189, 1269, 0189, 0391,
0531, 1514
Marantz 1189, 1269, 0189, 1289
Mitsubishi 1393

www.urcsupport.com
42
Atlas 4A ENG.fm Page 43 Thursday, April 12, 2007 1:25 PM

Norcent 1389
Nova 1389
Onkyo 0135, 0842, 1298, 1320,
1531
Optimus 1023, 0080, 0186, 0531,
0670, 1074
Oritron 1366, 1497
Panasonic 1308, 1518, 0309, 0367,
1288, 1316, 1548, 1633,
1763, 1764
Philips 1189, 1269, 0189, 0391,
1120, 1266
Pioneer 1023, 0014, 0080, 0150,
0244, 0531, 0630, 1384
Polaroid 1508
Polk Audio 0189, 1289, 1414
Proscan 1254
RCA 1023, 1609, 1254, 0080,
0531, 1074, 1390, 1511
Rio 1869
Samsung 1295, 1500
Sansui 0189
Sanyo 1251, 1469, 1801
Sharp 0186, 1286
Sharper Image 1556
Sherwood 1077, 1517, 1653
Sirius 1627, 1811, 1987
Sonic Blue 1532, 1869
Sony 1058, 1441, 1258, 1759,
1622, 0474, 1349, 1406,
1442, 1558, 1658, 1758,
1858
Soundesign 0670
Stereophonics 1023
Sunfire 1313
Teac 1074, 1390, 1528
Technics 1308, 1518, 0309
Thorens 1189
Toshiba 1788
Venturer 1390
Wards 0189, 0014, 0080
XM 1406, 1414

www.urcsupport.com
43
Atlas 4A ENG.fm Page 44 Thursday, April 12, 2007 1:25 PM

Yamaha 0176, 0186, 1176, 1276,


1331, 1375
Zenith 0857, 1293

Setup Codes for Audio Accessories


Códigos de configuración para los accesorios de
audio
Accurian 1106
Altec Lansing 0607, 1056, 1485
Apple 1115, 1644
Cambridge Soundworks 1530
Creative 0872
D-Link 1522
DLO 1155
Integra 1789
iPort 1917
Marantz 1491
Motorola 1464
NaviPod 1644
Netgear 1785
Omnifi 1605
Onkyo 1789
Roku 1828
Sonance 1917
SSI 1522
Yamaha 1809, 1810

Setup Codes for Cable Boxes/Converters


Códigos de configuración para los convertidores/
cajas de cable
ABC 0003, 0008, 0014, 0017
Americast 0899
Amino 1602, 1822
Bell & Howell 0014
Bell South 0899
Clearmaster 0883
ClearMax 0883
Coolmax 0883
Digeo 1187
Digi 0637
Director 0476

www.urcsupport.com
44
Atlas 4A ENG.fm Page 45 Thursday, April 12, 2007 1:25 PM

Dumont 0637
General Instrument 0476, 0810, 0276, 0003
GoldStar 0144
Hamlin 0009, 0273
i3 Micro 1602
Jerrold 0476, 0810, 0276, 0003,
0012, 0014
Memorex 0000
Motorola 1376, 0476, 0810, 0276,
1187, 1254, 1106, 1540
Multitech 0883
Myrio 1602, 1822
Pace 1376, 1877, 0237, 0008
Panasonic 1376, 1877, 0000, 0107
Panther 0637
Paragon 0000
Philips 1305, 0317
Pioneer 1877, 0877, 0144, 0533
Pulsar 0000
Quasar 0000
RadioShack 0883
RCA 1256
Regal 0279, 0273
Runco 0000
Samsung 1376, 1877, 0144
Sasktel 1737
Scientific Atlanta 1877, 0877, 0477, 0008,
0017
Sejin 1602
Sony 1006
Starcom 0003
Supercable 0276
Supermax 0883
Thomson 1256
Tocom 0012
Torx 0003
Toshiba 0000
Tristar 0883
V2 0883
Viewmaster 0883
Vision 0883

www.urcsupport.com
45
Atlas 4A ENG.fm Page 46 Thursday, April 12, 2007 1:25 PM

Vortex View 0883


Zenith 0000, 0525, 0899

Setup Codes for Cable/DVR/PVR Combos


Códigos de configuración para reproductores de DVD
Americast 0899
Amino 1822
Digeo 1187
General Instrument 0476, 0810
Jerrold 0476, 0810
Motorola 1376, 0810, 1187, 1106,
1540, 0476
Myrio 1822
Pace 1376,1877, 0237
Panasonic 1376, 1877
Pioneer 1877, 0877
RCA 1256
Sasktel 1737
Samsung 1376, 1877
Scientific Atlanta 1877, 0877
Sony 1006
Supercable 0276
Thomson 1256
Zenith 0899
Setup Codes for DVD Players
Códigos de configuración para reproductores de DVD
Accurian 1072, 1416
Adcom 1094
Advent 1016
Aiwa 0641
Akai 0695, 0770, 0899, 1089
Alco 0790
Allegro 0869
Amphion Media Works 0872, 1245
AMW 0872, 1245
Apex Digital 0672, 0717, 0755, 0794,
0796, 0797, 0830, 1004,
1020, 1056, 1061, 1100
Arrgo 1023
Aspire Digital 1168, 1407
Audiologic 0736

www.urcsupport.com
46
Atlas 4A ENG.fm Page 47 Thursday, April 12, 2007 1:25 PM

Audiovox 0790, 1041, 1071, 1072,


1121, 1122
Axion 1071, 1072
B&K 0655, 0662
BBK 1224
Bel Canto Design 1571
Blaupunkt 0717
Blue Parade 0571
Broksonic 0695, 0868, 1419
Buffalo 1882
Cary Audio Design 1477
CAVS 1057
Centrios 1577
Cinea 0831
Cinego 1399
CineVision 0876, 0833, 0869
Citizen 1277
Coby 0778, 0852, 1086, 1107,
1165, 1177, 1351
Craig 0831
Curtis Mathes 1087
CyberHome 0816, 0874, 1023, 1024,
1117, 1129, 1502, 1537
D-Link 1881
Daewoo 0784, 0705, 0833, 0869,
1169, 1172, 1234, 1242,
1441, 1443
Denon 0490, 0634
Desay 1407, 1455
Diamond Vision 1316, 1609, 1610
Disney 0675, 1270
Dual 1068, 1085
Durabrand 1127
DVD2000 0521
Emerson 0591, 0675, 0821, 1268
Enterprise 0591
ESA 0821, 1268, 1443
Fisher 0670, 1919
Funai 0675, 1268, 1334
Gateway 1073, 1077, 1158
GE 0522, 0815, 0717

www.urcsupport.com
47
Atlas 4A ENG.fm Page 48 Thursday, April 12, 2007 1:25 PM

Go Video 0744, 0715, 0741, 0783,


0833, 0869, 1044, 1075,
1099, 1144, 1158, 1304,
1443, 1730
Go Vision 1071, 1072
GoldStar 0741
GPX 0699, 0769
Greenhill 0717
Harman/Kardon 0582, 0702
Hitachi 0573, 0664, 1247, 1919
Hiteker 0672
iLo 1348, 1472
Initial 0717, 1472
Innovative Technology 1542
Insignia 1268
Integra 0627
Jaton 1078
JBL 0702
Jensen 1016
JSI 1423
JVC 0558, 0623, 0867, 1164,
1275, 1602, 1863
jWin 1049, 1051
Kawasaki 0790
Kenwood 0490, 0534, 0682, 0737
KLH 0717, 0790, 1020, 1149,
1261
Konka 0711, 0719, 0720, 0721
Koss 0651, 0896, 1423
Kreisen 1421
Landel 0826
Lasonic 0798, 1173
Lenoxx 1127
LG 0591, 0741, 0801, 0869,
1526
LiteOn 1058, 1158, 1416, 1440
Loewe 0511
Magnavox 0503, 0539, 0646, 0675,
0821, 1268, 1506
Malata 0782, 1159
Marantz 0539
McIntosh 1273

www.urcsupport.com
48
Atlas 4A ENG.fm Page 49 Thursday, April 12, 2007 1:25 PM

Memorex 0695, 0831, 1270


Microsoft 0522, 1708
Mintek 0839, 0717, 1472
Mitsubishi 1521, 0521
Momitsu 1082
NAD 0741
Nakamichi 1222
NEC 0785
Nesa 0717, 1603
NeuNeo 1454
Next Base 0826
NexxTech 1402
Norcent 1003, 0872, 1107, 1265,
1457
Onkyo 0503, 0627, 0792
Oppo 1224, 1525
OptoMedia Electronics 0896
Oritron 0651
Panasonic 0490, 0632, 0703, 1362,
1462, 1490, 1762
Philips 0503, 0539, 0646, 0675,
0854, 1260, 1267, 1354
Pioneer 0525, 0571, 0631, 0632
Polaroid 1020, 1061, 1086, 1245,
1316, 1478, 1480, 1482
Polk Audio 0539
Portland 0770
Presidian 0675, 1072
Prima 1016
Primare 1467
Princeton 0674
Proscan 0522
ProVision 0778
Qwestar 0651
RCA 0522, 0571, 0717, 0790,
0822, 1022, 1132, 1193
Rio 0869
RJTech 1360
Rotel 0623, 1178
Rowa 0823
Sampo 0698, 0752, 1501

www.urcsupport.com
49
Atlas 4A ENG.fm Page 50 Thursday, April 12, 2007 1:25 PM

Samsung 0490, 0573, 0820, 0899,


1044, 1075
Sansui 0695
Sanyo 0670, 0695, 0873, 1919
Sensory Science 1158
Sharp 0630, 0675, 0752, 1256
Sharper Image 1117
Sherwood 0633, 0770, 1043, 1077,
1889
Shinsonic 0533, 0839
Sigma Designs 0674
Sonic Blue 0869, 1099
Sony 0533, 1533, 0864, 1033,
1431, 1432, 1433, 1548,
1892
Sound Mobile 1298
Sova 1122
Sungale 1074, 1532
Superscan 0821
SVA 0860, 1105
Sylvania 0675, 0821, 1268
Symphonic 0675, 0821
TAG McLaren 0894
Teac 0790, 0809
Technics 0490, 0703
Technosonic 0730
Techwood 0692
Terapin 1031
Theta Digital 0571
Toshiba 0503, 0695, 1045, 1154,
1854
Tredex 0799, 0800, 0803, 0804
Urban Concepts 0503
US Logic 0839
Valor 1298
Venturer 0790
Vialta 1509
Vizio 1064, 1226
Vocopro 1027, 1360
Xbox 0522, 1708
Xwave 1001

www.urcsupport.com
50
Atlas 4A ENG.fm Page 51 Thursday, April 12, 2007 1:25 PM

Yamaha 0490, 0539, 0545


Zenith 0503, 0591, 0741, 0869
Zoece 1265

Setup Codes for DVD Recorders


Códigos de configuración para grabadoras de DVD
Accurian 1416
Apex Digital 1056
Aspire Digital 1168
Coby 1086
CyberHome 1129, 1502
Funai 0675, 1334
Gateway 1073, 1158
Go Video 0741, 1158, 1304, 1730
iLo 1348
JVC 1164, 1275
Kreisen 1421
LG 0741
LiteOn 1158, 1416, 1440
Magnavox 0646, 0675, 1506
Panasonic 0490
Philips 0646
Pioneer 0631
Polaroid 1086
RCA 0522
Samsung 0490
Sensory Science 1158
Sharp 0675
Sony 1033, 1431, 1432, 1433
Sylvania 0675
Zenith 0741
Setup Codes for DVD Combos
Códigos de configuración para conjuntos de DVD
Akai 0695
Audiovox 1071, 1121, 1122
iLo 1472
Initial 1472
LG 1526
Mintek 1472
RCA 1193

www.urcsupport.com
51
Atlas 4A ENG.fm Page 52 Thursday, April 12, 2007 1:25 PM

Satellite Receivers and DVR/PVR Systems


Receptores de satélite y sistemas de DVR/PVR
Setup Codes for Satellite Receivers
Códigos de configuración para los receptores de
satélite
AlphaStar 0772
Amino 1615
Chaparral 0216
Coolsat 1806
Crossdigital 1109
DirecTV 1377, 0392, 0566, 0639,
1639, 1142, 0247, 0749,
1749, 0724, 0819, 1856,
1076, 1108, 0099, 1109,
1392, 1414, 1442, 1443,
1444, 1609, 1640
Dish Network System 1505, 1005, 0775, 1170,
1775
Dishpro 1505, 1005, 0775, 1775
Echostar 1505, 1005, 0775, 1170,
1775
Expressvu 0775, 1775
GE 0566
General Instrument 0869
GOI 0775, 1775
Goodmans 1246
Hisense 1535
Hitachi 0819, 1250
HTS 0775, 1775
Hughes Network Systems 1142, 0749, 1749, 1442,
1443, 1444
Humax 1790
iLo 1535
JVC 0775, 1170, 1775
LG 1226, 1414
Magnavox 0724, 0722
Memorex 0724
Mitsubishi 0749
Motorola 0869
NEC 1270
Next Level 0869
Panasonic 0247, 0701
Pansat 1807

www.urcsupport.com
52
Atlas 4A ENG.fm Page 53 Thursday, April 12, 2007 1:25 PM

Paysat 0724
Philips 1142, 0749, 1749, 0724,
1076, 0722, 0099, 1442
Proscan 0392, 0566
Proton 1535
RadioShack 0869
RCA 0566, 0855, 0143, 1392
Samsung 1377, 1276, 1108, 1109,
1442, 1609
Sanyo 1219
SKY 0856
Sony 0639, 1639, 1640
Star Choice 0869
Tivo 1142, 1442, 1443, 1444
Toshiba 0749, 1749, 0790, 1285
UltimateTV 1392, 1640
Ultrasat 1806
Uniden 0724, 0722
US Digital 1535
USDTV 1535
Voom 0869
Zenith 1856, 0856

Setup Codes for DVR/PVR Systems


Códigos de configuración para los sistemas de DVR/
PVR
Amino 1615
DirecTV 1377, 0392, 0639, 1142, 1076,
0099, 1392, 1442, 1443, 1444,
1640
Dish Network System 1505, 0775
Dishpro 1505, 0775
Echostar 1505, 0775, 1170
Expressvu 0775
Hughes Network Systems 1142, 1442, 1443, 1444, 0739
JVC 1170
Motorola 0869
Philips 1142, 1442, 0739
Proscan 0392
RCA 1392
Samsung 1442, 0739
Sony 0639, 1640

www.urcsupport.com
53
Atlas 4A ENG.fm Page 54 Thursday, April 12, 2007 1:25 PM

Star Choice 0869

Setup Codes for TVs


Códigos de configuración para Televisor
A-Mark 0003
Abex 0032
Accurian 1803
Action 0873l
Admira 0093, 0463
Advent 0761, 0783, 0815, 0817, 0842,
1933
Adventura 0046
Aiko 0092
Aiwa 0701
Akai 0812, 0702, 0030, 0098, 0672,
1207, 1903, 1935
Alaron 0179, 0183, 0216
Albatron 0700, 0843
Ambassador 0177
America Action 0180
Ampro 0751
Anam 0180, 0004, 0009, 0068
Anam National 0055, 0161
AOC 0030, 0003, 0019, 0052, 0137,
0185, 1365
Apex Digital 0748, 0879, 0765, 0767, 0890,
1217, 1943
Archer 0003
Astar 1548
Audiovox 0451, 0180, 0092, 0003, 0623,
0710, 0802, 0846, 0875, 1284,
1937, 1951, 1952
Aventura 0171
Axion 1937
Belcor 0019
Bell & Howell 0154, 0016
BenQ 1032, 1315
Bradford 0180
Brockwood 0019
Broksonic 0236, 0463, 0003, 1935, 1938
Byd:sign 1309, 1311

www.urcsupport.com
54
Atlas 4A ENG.fm Page 55 Thursday, April 12, 2007 1:25 PM

Cadia 1283
Candle 0030, 0046, 0056, 0186
Carnivale 0030
Carver 0054, 0170
CCE 0217, 0329
Celebrity 0000
Celera 0765
Champion 1362
Changhong 0765
Cinego 1986
Citizen 0060, 0030, 0092, 0039, 0046,
0056, 0186, 0280
Clairtone 0185
Clarion 0180
Commercial Solutions 1447, 0047
Concerto 0056
Contec 0180, 0157, 0158, 0185
Craig 0180, 0161
Crosley 0054
Crown 0180, 0039
Curtis Mathes 0047, 0054, 0154, 0451, 0093,
0060, 0702, 0030, 0145, 0166,
1347, 1147, 0747, 0466, 0056,
0039, 0016
CXC 0180
CyberHome 0794
Cytron 1326
Daewoo 0451, 0092, 1661, 0019, 0039,
0066, 0067, 0091, 0623, 0661,
0672
Daytron 0019
Dell 1080, 1178, 1264, 1403
Denon 0145, 0511
Denstar 0628
Diamond Vision 1996, 1997
Dumont 0017, 0019
Durabrand 0463, 0180, 0178, 0171, 1034,
0003
Dwin 0720, 0774
Dynatech 0049
Electroband 0000, 0185
Electrograph 1623, 1755

www.urcsupport.com
55
Atlas 4A ENG.fm Page 56 Thursday, April 12, 2007 1:25 PM

Electrohome 0381, 0389, 0409


Emerson 0154, 0236, 0463, 0180, 0178,
0171, 1963, 1944, 0623, 0282,
0280, 0270, 0185, 0183, 0182,
0181, 0179, 0177, 0158, 0039,
0038, 0019
Emprex 1422, 1546
Envision 0030, 0813, 1365
Epson 0833, 0840, 1290
ESA 0812, 0171, 1944, 1963
Fisher 0154, 0159
FlexVision 0710
Fujitsu 0179, 0186, 0683, 0809, 0853
Funai 0180, 0171, 0179, 1271, 1963
Futuretech 0180
Gateway 1001, 1002, 1003, 1004, 1755,
1756
GE 1447, 0047, 0051, 0451, 0178,
1347, 0747, 0282, 0279, 0251,
0174, 0138, 0135, 0055, 0029,
0027, 0021
Gibralter 0017, 0030, 0019
Go Video 0886
GoldStar 0178, 0030, 0001, 0002, 0019,
0032, 0106, 0409
Goodmans 0360
Gradiente 0392
Grunpy 0180, 0179
Haier 1034, 0768
Hallmark 0178
Hannspree 1348, 1351, 1352
Hantarex 1338
Harley Davidson 0043, 0179
Harman/Kardon 0054, 0078
Harvard 0180, 0068
Havermy 0093
Helios 0865
Hello Kitty 0451
Hewlett Packard 1088, 1089, 1101, 1494, 1502
Hisense 0748

www.urcsupport.com
56
Atlas 4A ENG.fm Page 57 Thursday, April 12, 2007 1:25 PM

Hitachi 1145, 0145, 0016, 0032, 0038,


0056, 0095, 0097, 0151, 0173,
0227, 0279, 0409, 0413, 0797,
1960
HP 1088, 1089, 1101, 1494, 1502
Hyundai 0849, 1219, 1294
iLo 1286, 1603, 1990
Infinity 0054
Initial 1603, 1990
Insignia 0171, 1204, 1326, 1517, 1963,
2002
Inteq 0017
Janeil 0046
JBL 0054
JCB 0000
Jensen 0761, 0050, 0815, 0817, 1299,
1933
JVC 0053, 0036, 0069, 0160, 0169,
0182, 0731, 1253
Kamp 0216
Kawasho 0158, 0216, 0308
Kaypani 0052
KEC 0180
Kenwood 0030, 0019
KLH 0765, 0767, 1962
Kloss 0024, 0046, 0078
KMC 0106
Konka 0628, 0632, 0638, 0703, 0707
Kost 1262, 1483
KTV 0180, 0030, 0039, 0183, 0185,
0217, 0280
LG 1265, 0178, 0442, 0700, 0829,
0856, 1178, 1325, 1423, 1758,
1993
Loewe 0136
Logik 0016
Luxman 0056
LXI 0047, 0054, 0154, 0156, 0178,
0148, 0747
Magnavox 1454, 0054, 0030, 0706, 1963,
1944, 1525, 1254, 1198, 0802,
0386, 0230, 0187, 0186, 0179,
0096, 0036, 0028, 0024, 0020
Majestic 0015, 0016

www.urcsupport.com
57
Atlas 4A ENG.fm Page 58 Thursday, April 12, 2007 1:25 PM

Marantz 0054, 0030, 0444, 0704, 0854,


0855, 1154, 1398
Matsushita 0250, 0650
Maxent 0762, 1211, 1755
Megapower 0700
Megatron 0178, 0145, 0003
MEI 0185
Memorex 0154, 0463, 0150, 0178, 0016,
0106, 0179
MGA 0150, 0178, 0030, 0019, 0155
Midland 0047, 0017, 0051, 0032, 0039,
0135, 0747
Mintek 1603, 1990
Minutz 0021
Mitsubishi 0093, 1250, 0150, 0178, 0014,
0019, 0098, 0155, 0331, 0358,
0836, 0868, 1550
Monivision 0700, 0843
Motorola 0093, 0055, 0835
Moxell 0835
MTC 0060, 0030, 0019, 0049, 0056,
0091, 0185, 0216
Multitech 0180, 0049, 0217
NAD 0156, 0178, 0866
NEC 0030, 0019, 0036, 0056, 0170,
0434, 0497, 0882, 1398, 1704
Neovia 1338
NetTV 0762, 1755
Nikko 0178, 0030, 0092, 0317
Noblex 0430
Norcent 0748, 0824, 1089, 1365, 1589,
1590, 1591
Norwood Micro 1286, 1296, 1303
Noshi 0018
NTC 0092
Olevia 1144, 1240, 1331, 1610
Olympus 1342
Onwa 0180
Optimus 0154, 0250, 0166, 0650
Optoma 0887
Optonica 0093, 0165
Orion 0236, 0463, 1463, 0179

www.urcsupport.com
58
Atlas 4A ENG.fm Page 59 Thursday, April 12, 2007 1:25 PM

Panasonic 0250, 0051, 0055, 0162, 0226,


0338, 0375, 0650, 1291, 1410,
1941, 1946, 1947
Penney 0047, 0156, 0051, 0060, 0178,
0030, 1347, 0747, 0309, 0149,
0138, 0135, 0110, 0039, 0032,
0027, 0021, 0019, 0018, 0003,
0002
Petters 1523
Philco 0054, 0030, 0019, 0020, 0028,
0096, 0302
Philips 1454, 0054, 0690, 1154, 1483
Pilot 0030, 0019, 0039
Pioneer 0166, 0038, 0172, 0679, 0866,
1260, 1398
Polaroid 0765, 0865, 1262, 1276, 1314,
1316, 1326, 1327, 1328, 1341,
1498, 1523, 1991, 1992
Portland 0092, 0019, 0039
Prima 0761, 0783, 0815, 0817, 1933
Princeton 0700, 0717
Prism 0051
Proscan 1447, 0047, 0747, 1347
Proton 0178, 0003, 0031, 0052, 0466
Protron 1320, 1323
Proview 0835, 1401, 1498
Pulsar 0017, 0019
Quasar 0250, 0051, 0055, 0165, 0219,
0650
RadioShack 0047, 0154, 0180, 0178, 0030,
0019, 0032, 0039, 0056, 0165,
0409, 0747
RCA 1447, 0047, 2002, 1958, 1953,
1948, 1547, 1347, 1247, 1147,
1047, 0747, 0679, 0278, 0174,
0135, 0090, 0038, 0029, 0019,
0018
Realistic 0154, 0180, 0178, 0030, 0019,
0032, 0039, 0056, 0165
Rhapsody 0183, 0185, 0216
Runco 0017, 0030, 0251, 0497, 0603,
1398
Sampo 0030, 0032, 0039, 0052, 0100,
0110, 0762, 1755

www.urcsupport.com
59
Atlas 4A ENG.fm Page 60 Thursday, April 12, 2007 1:25 PM

Samsung 0060, 0812, 0702, 0178, 0030,


1903, 1575, 1395, 1312, 1060,
0814, 0766, 0427, 0408, 0329,
0056, 0032, 0019
Samsux 0039
Sansui 0463, 1409, 1935
Sanyo 0154, 0088, 0107, 0146, 0159,
0232, 0484, 0799, 0893, 1142
Sceptre 0878, 1217, 1360, 1599
Scimitsu 0019
Scotch 0178
Scott 0236, 0180, 0178, 0019, 0179,
0309
Sears 0047, 0054, 0154, 0156, 0178,
0171, 0015, 0056, 0146, 0148,
0149, 0159, 0168, 0179, 0281,
0747
Sharp 0093, 0039, 0153, 0157, 0165,
0220, 0281, 0386, 0398, 0491,
0688, 0689, 0818, 0851, 1602
Sheng Chia 0093
Sherwood 1399
Shogun 0019
Signature 0016
Signet 1262
SIM2 Multimedia 1297
Simpson 0186, 0187
Sony 1100, 0000, 0011, 0080, 0111,
0273, 0353, 0810, 0834, 1317
Soundesign 0180, 0178, 0179, 0186
Sova 1320, 1952
Soyo 1520
Spectricon 0003, 0137
Squareview 0171
SSS 0180, 0019
Starlite 0180
Studio Experience 0843
Superscan 0093, 0864
Supre-Macy 0046
Supreme 0000
SVA 0748, 0587, 0768, 0865, 0870,
0871, 0872

www.urcsupport.com
60
Atlas 4A ENG.fm Page 61 Thursday, April 12, 2007 1:25 PM

Sylvania 0054, 0030, 0171, 0020, 0028,


0065, 0096, 0381, 1271, 1944,
1963
Symphonic 0180, 0171, 1944
Syntax 1144, 1240, 1331
Tandy 0093
Tatung 0003, 0049, 0055, 0396, 1101,
1285, 1286, 1287, 1288, 1361,
1756
Technics 0250, 0051
Technol Ace 0179
Technovox 0007
Techview 0847
Techwood 0051, 0003, 0056
Teknika 0054, 0180, 0150, 0060, 0092,
0016, 0019, 0039, 0056, 0175,
0179, 0186, 0312, 0322
Telefunken 0702, 0056, 0074
Tera 0031
Thomson 0209, 0210
TMK 0178, 0056, 0177
TNCi 0017
Toshiba 0154, 1256, 0156, 1265, 0060,
1945, 1935, 1704, 1656, 1635,
1356, 1343, 1325, 1306, 1156,
0845, 0832, 0650, 0149, 0036
Tosonic 0185
Totevision 0039
Trical 0157
TVS 0463
Ultra 0391, 1323
Universal 0027
Universum 1337
US Logic 1286, 1303
Vector Research 0030
Victor 0053
Video Concepts 0098
Vidikron 0054, 0242, 1398
Vidtech 0178, 0019, 0036
Viewsonic 0797, 0857, 0864, 0885, 1330,
1342, 1578, 1627, 1755
Viking 0046, 0312
Viore 1207

www.urcsupport.com
61
Atlas 4A ENG.fm Page 62 Thursday, April 12, 2007 1:25 PM

Visart 1336
Vizio 0864, 0885, 1499, 1756, 1758
Wards 0054, 0178, 0030, 1156, 0866,
0202, 0179, 0174, 0165, 0111,
0096, 0080, 0056, 0029, 0028,
0027, 0021, 0020, 0019, 0016
Waycon 0156
Westinghouse 0885, 0889, 0890, 1282, 1577
White Westinghouse 0463, 0623
Wyse 1365
Yamaha 0030, 0019, 0769, 0797, 0833,
0839
Zenith 0017, 0463, 1265, 0178, 0092,
0016
Zonda 0003

Setup Codes for TVs (DLP)


Códigos de configuración para Televisor (DLP)
Hewlett Packard 1494
HP 1494
LG 1265
Magnavox 1525
Mitsubishi 1250
Optoma 0887
Panasonic 1291
RCA 1447
Samsung 0812, 1060, 1312
SVA 0872
Toshiba 1265, 1306
Vizio 1499

Setup Codes for TVs (HDTV)


Códigos de configuración para Televisor (HDTV)
Advent 0842
Hitachi 1960
Marantz 0854
Mitsubishi 0150
Panasonic 0250, 0650, 1291
Pioneer 0679
Princeton 0717
RCA 1447

www.urcsupport.com
62
Atlas 4A ENG.fm Page 63 Thursday, April 12, 2007 1:25 PM

Samsung 0812, 0702


Sharp 0688, 0689
Toshiba 1256

Setup Codes for TVs (LCD)


Códigos de configuración para Televisor (LCD)
Accurian 1803
Action 0873
Akai 1935
AOC 1365
Apex Digital 0890, 1217
Astar 1548
Audiovox 0180, 0710, 0802, 0846,
0875, 1284, 1937, 1951,
1952
BenQ 1315
Byd:sign 1309, 1311
Cadia 1283
CyberHome 0794
Dell 1080, 1178, 1264
Emprex 1422, 1546
Envision 0813, 1365
FlexVision 0710
Funai 0171
Go Video 0886
Hannspree 1348, 1351
Hewlett Packard 1088
HP 1088
Hyundai 0849, 1219, 1294
iLo 1286, 1603, 1990
Initial 1603, 1990
Insignia 1204, 1517, 2002
Jensen 1299
Kost 1262
LG 0856, 1178, 1993
Magnavox 1454, 0802, 1198
Marantz 0855
Maxent 0762, 1211
Mintek 1603, 1990
Mitsubishi 1250
NetTV 0762

www.urcsupport.com
63
Atlas 4A ENG.fm Page 64 Thursday, April 12, 2007 1:25 PM

Norcent 1365, 1589, 1591


Norwood Micro 1286, 1296
Olevia 1144, 1240, 1331, 1610
Panasonic 0650, 1941
Petters 1523
Philips 1454, 1483
Polaroid 1262, 1276, 1316, 1341,
1498, 1523
Protron 1320, 1323
Proview 1401
RCA 0047, 1958
Sampo 0762
Samsung 0812, 0766, 0814, 1395,
1575
Sansui 1409
Sanyo 1142
Sceptre 0878, 1217, 1360, 1599
Sharp 0093, 0818, 1602
Sherwood 1399
Signet 1262
Sony 0810
Sova 1320
Soyo 1520
Superscan 0864
SVA 0587, 0870, 0871
Sylvania 0171, 1271
Symphonic 0171
Syntax 1144, 1240, 1331
Tatung 1286
Techview 0847
Toshiba 0845, 1343, 1635, 1656
Ultra 1323
US Logic 1286
Vidikron 1398
Viewsonic 0857, 0864, 0885, 1330,
1578, 1627
Visart 1336
Vizio 0864, 0885, 1756
Westinghouse 0885, 0889, 0890, 1282,
1577
Wyse 1365

www.urcsupport.com
64
Atlas 4A ENG.fm Page 65 Thursday, April 12, 2007 1:25 PM

Zenith 1265

Setup Codes for TV/DVD Combos


Códigos de configuración para conjuntos de TV/DVD
Controlled by the TV
Accurian 1803
Advent 1933
Akai 1935
Apex Digital 1943
Audiovox 1937, 1951, 1952
Axion 1937
Broksonic 1935
Cinego 1986
Diamond Vision 1997
Emerson 1963
ESA 1963
Funai 1963
Hitachi 1960
iLo 1990
Initial 1990
Insignia 1963, 2002
Jensen 1933
KLH 1962
LG 1993
Magnavox 1963
Mintek 1990
Panasonic 1941
Polaroid 1991
Prima 1933
RCA 1948, 1958, 2002
Samsung 1903
Sansui 1935
Sova 1952
Sylvania 1963
Toshiba 1635, 1935

Controlled by the DVD


Advent 1016
Akai 0695
Apex Digital 0830
Audiovox 1071, 1121, 1122

www.urcsupport.com
65
Atlas 4A ENG.fm Page 66 Thursday, April 12, 2007 1:25 PM

Axion 1071
Broksonic 0695
Cinego 1399
Diamond Vision 1610
Emerson 0675, 1268
ESA 1268
Funai 1268
Go Vision 1071
Hitachi 1247
iLo 1472
Initial 1472
Insignia 1268
Jensen 1016
KLH 1261
Konka 0719, 0720
LG 1526
Magnavox 1268
Mintek 1472
Panasonic 1490
Philips 0854, 1260
Polaroid 1480
Prima 1016
RCA 1022, 1193
Samsung 0899
Sansui 0695
Sova 1122
Sylvania 0675, 1268
Toshiba 0695
Setup Codes for TV/VCR Combos
Códigos de configuración para conjuntos de TV/VCR
Controlled by the TV
America Action 0180
Audiovox 0180
Emerson 0236

www.urcsupport.com
66
Atlas 4A ENG.fm Page 67 Thursday, April 12, 2007 1:25 PM

Controlled by the VCR


America Action 0278
Audiovox 0278
Broksonic 0002, 0479, 1479
Citizen 1278
Colt 0072
Curtis Mathes 1035
Daewoo 0637, 1278
Emerson 0002, 0294, 0479, 0593,
1278, 1479
Funai 0000
GE 0240, 0807, 1035, 1060
GoldStar 1237
Harley Davidson 0000
Hitachi 0000
LG 1037
Lloyd's 0000
Magnasonic 0593, 1278
Magnavox 0000, 0593, 1781
Magnin 0240
Memorex 0162, 0454, 1037, 1162,
1237, 1262
MGA 0240
Mitsubishi 0807
Optimus 0162, 0454, 0593, 1162,
1262
Orion 0002, 0479, 1479
Panasonic 0162, 1035, 1162, 1262
Penney 0240, 1035, 1237
Quasar 0162, 1035, 1162
RadioShack 0000, 1037
RCA 0240, 0807, 1035, 1060
Samsung 1014
Sansui 0000, 0479, 1479
Sanyo 0240
Sears 0000, 1237
Sony 0000, 1232
Sylvania 1781
Symphonic 0000, 0593
Thomas 0000
Toshiba 0845, 1145

www.urcsupport.com
67
Atlas 4A ENG.fm Page 68 Thursday, April 12, 2007 1:25 PM

White Westinghouse 0637


Zenith 0000, 0479, 0637, 1479

Setup Codes for TV/VCR/DVD Combos


Códigos de configuración para conjuntos de TV/VCR/
DVD
Controlled by the TV
Akai 1903
Broksonic 1938
Diamond Vision 1996
Emerson 1944
ESA 1944
Magnavox 1944
Panasonic 1946, 1947
Polaroid 1992
RCA 1953
Sylvania 1944
Symphonic 1944
Toshiba 1945

Controlled by the DVD


Akai 0899
Broksonic 0868
Diamond Vision 1609
Emerson 0821
ESA 0821
Funai 1334
Magnavox 0821
Panasonic 1362, 1462
Polaroid 1482
RCA 1132
Sharp 0630
Superscan 0821
Sylvania 0821
Symphonic 0821
Toshiba 1045

Controlled by the VCR


Sharp 0807

www.urcsupport.com
68
Atlas 4A ENG.fm Page 69 Thursday, April 12, 2007 1:25 PM

Setup Codes for VCRs


Códigos de configuración para VCR
ABS 1972
Admiral 0048, 0209
Adventura 0000
Aiko 0278
Aiwa 0037, 0000, 0124, 0307,
0468
Akai 0041, 0049, 0053, 0061,
0106, 0175
Alienware 1972
America Action 0278
American High 0035
Asha 0240
Audiovox 0037, 0278
Beaumark 0240
Bell & Howell 0104
Broksonic 0184, 0121, 0209, 0002,
0211, 0295, 0361, 0479,
1479, 1815
Calix 0037
Canon 0035, 0102
Capehart 0020
Carver 0081
CCE 0072, 0278
Citizen 0037, 0278, 1278
Colt 0072
Craig 0037, 0047, 0240, 0072,
0271
Curtis Mathes 0060, 0035, 0162, 0041,
0760, 1035
Cybernex 0240, 0051
CyberPower 1972
Daewoo 0045, 0278, 0020, 0561,
0637, 1278
Daytron 0020
Dell 1972
Denon 0042
DirecTV 0739
Durabrand 0039, 0038
Dynatech 0000
Electrohome 0037

www.urcsupport.com
69
Atlas 4A ENG.fm Page 70 Thursday, April 12, 2007 1:25 PM

Electrophonic 0037
Emerex 0032
Emerson 0037, 0184, 0000, 0121,
0043, 0209, 0002, 0278,
1479, 1278, 0637, 1593,
0593, 0561, 0510, 0479,
0361, 0295, 0294, 0212,
0211, 0208, 0088, 0068,
0061, 0036
Fisher 0047, 0104, 0054, 0066
Fuji 0035, 0033
Funai 0000, 0593, 1593
Garrard 0000
Gateway 1972
GE 0060, 0035, 0240, 0065,
0202, 0760, 0761, 0807,
1035, 1060
Go Video 0232, 0279, 0432, 0526,
0643
GoldStar 0037, 0038, 0018, 1237
Gradiente 0000, 0408
Grundig 0195
Harley Davidson 0000
Harman/Kardon 0081, 0038, 0075
Harwood 0072, 0068
Headquarter 0046
Hewlett Packard 1972
HI-Q 0047
Hitachi 0000, 0042, 0041, 0065,
0082, 0089, 0105, 0166
Howard Computers 1972
HP 1972
Hughes Network Systems 0042, 0739
Humax 0739
Hush 1972
iBUYPOWER 1972
Jensen 0041
JVC 0067, 0041, 0008, 0206,
0207, 0384, 1707
KEC 0037, 0278
Keen 0693
Kenwood 0067, 0041, 0038, 0384
KLH 0072

www.urcsupport.com
70
Atlas 4A ENG.fm Page 71 Thursday, April 12, 2007 1:25 PM

Kodak 0035, 0037


LG 1037
Linksys 1972
Lloyd's 0000, 0208
Logik 0072
LXI 0037
Magnasonic 0593, 1278
Magnavox 0035, 0039, 0081, 0000,
0149, 0110, 0563, 0593,
1593, 1781
Magnin 0240
Marantz 0035, 0081
Marta 0037
Matsushita 0035, 0162, 1162
Media Center PC 1972
MEI 0035
Memorex 0035, 0162, 0037, 0048,
0039, 0047, 0240, 0000,
0104, 0209, 0046, 0307,
0454, 0479, 1037, 1162,
1237, 1262
MGA 0240, 0043, 0061
MGN Technology 0240
Microsoft 1972
Mind 1972
Minolta 0042, 0105
Mitsubishi 0067, 0043, 0061, 0075,
0173, 0443, 0807
Motorola 0035, 0048
MTC 0240, 0000
Multitech 0000, 0072
NAD 0058
NEC 0104, 0067, 0041, 0038,
0040, 0050, 0082
Nikko 0037
Nikon 0034
Niveus Media 1972
Noblex 0240
Northgate 1972
Olympus 0035, 0226
Onkyo 0222

www.urcsupport.com
71
Atlas 4A ENG.fm Page 72 Thursday, April 12, 2007 1:25 PM

Optimus 1062, 0162, 0037, 0048,


0104, 0058, 0432, 0454,
0593, 1048, 1162, 1262
Optonica 0062
Orion 0184, 0209, 0002, 0295,
0479, 1479
Panasonic 1062, 0035, 0162, 0077,
0102, 0225, 0226, 0227,
0378, 0454, 0616, 1035,
1162, 1262
Penney 0035, 0037, 0240, 0042,
0038, 0040, 0054, 1035,
1237
Pentax 0042, 0065, 0105
Philco 0035
Philips 0035, 0081, 0062, 0110,
0618, 0739, 1081, 1181
Pilot 0037
Pioneer 0067, 0058
Polk Audio 0081
Portland 0020
Presidian 1593
Profitronic 0240
Proscan 0060, 0202, 0760, 0761,
1060
Protec 0072
Pulsar 0039, 0051
Quarter 0046
Quartz 0046
Quasar 0035, 0162, 0077, 0454,
1035, 1162
RadioShack 0000, 1037
Radix 0037
Randex 0037
RCA 0060, 0240, 0042, 0149,
0058, 0065, 0077, 0105,
0106, 0202, 0760, 0761,
0807, 0880, 1035, 1060
Realistic 0035, 0037, 0048, 0047,
0000, 0104, 0046, 0062,
0066
ReplayTV 0614, 0616
Ricavision 1972
Ricoh 0034

www.urcsupport.com
72
Atlas 4A ENG.fm Page 73 Thursday, April 12, 2007 1:25 PM

Runco 0039
Salora 0075
Samsung 0240, 0045, 0051, 0053,
0739, 1014
Samtron 0643
Sanky 0048, 0039
Sansui 0000, 0067, 0209, 0041,
0082, 0271, 0479, 1479
Sanyo 0047, 0240, 0104, 0046,
0159
Scott 0184, 0045, 0121, 0043,
0210, 0211, 0212
Sears 0035, 0037, 0047, 0000,
0042, 0104, 0046, 0054,
0066, 0105, 1237
Sharp 0048, 0062, 0807, 0848
Shintom 0072
Shogun 0240, 0051
Singer 0072
Sonic Blue 0614, 0616
Sony 0035, 0032, 0033, 0000,
0011, 0034, 0636, 1032,
1232, 1972
Stack 9 1972
STS 0042
Sylvania 0035, 0081, 0000, 0043,
0110, 0593, 1593, 1781
Symphonic 0000, 0593, 1593
Systemax 1972
Tagar Systems 1972
Tatung 0041
Teac 0000, 0041
Technics 0035, 0162
Teknika 0035, 0037, 0000, 0052
Thomas 0000
Tivo 0618, 0636, 0739, 1996
TMK 0240, 0036, 0208
Toshiba 0045, 0043, 0066, 0210,
0212, 0366, 0845, 1008,
1145, 1972, 1996
Totevision 0037, 0240
Touch 1972
Unitech 0240

www.urcsupport.com
73
Atlas 4A ENG.fm Page 74 Thursday, April 12, 2007 1:25 PM

Vector 0045
Vector Research 0038, 0040
Video Concepts 0045, 0040, 0061
Videomagic 0037
Videosonic 0240
Viewsonic 1972
Villain 0000
Voodoo 1972
Wards 0060, 0035, 0048, 0047,
0081, 0240, 0000, 0042,
0072, 0149, 0062, 0212,
0760
White Westinghouse 0209, 0072, 0637
XR-1000 0035, 0000, 0072
Yamaha 0038
Zenith 0039, 0033, 0000, 0209,
0034, 0479, 0637, 1139,
1479
ZT Group 1972

www.urcsupport.com
74
Atlas 4A ENG.fm Page 75 Thursday, April 12, 2007 1:25 PM

NOTES
Atlas 4A ENG.fm Page 76 Thursday, April 12, 2007 1:25 PM

M4AB06

Revision 1.0

www.urcsupport.com
76

You might also like