DPCO Lab Questions Print
DPCO Lab Questions Print
2. Design and implement a combinational circuit using basic gates for arbitrary function
like half adder and half subtractor.
4. Design and construct a 4-bit binary adder using suitable logic gates and verify its truth
table
Page 1 of
5. Design and implement a combinational circuit using basic gates for binary to gray
code convertor.
7. Validate a combinational circuit that converts a four bit gray code to binary code.
8. Design and implement a combinational circuit for 1 x 4 demux using basic gates.
9. Design and construct a combinational circuit for 4 x 1 mux using basic gates.
Page 2 of
Aim/Principle/ Tabulation/ Calculatio Viva-Voce Recor Total
Apparatus Circuit/ n& d
required/Procedure Program/ Results
Drawing
25 35 20 10 10 100
10. Design and implement a combinational circuit using basic gates for BCD to Excess –
3 code Convertor.
11. Design and construct a 4 bit Synchronous down counter using JK flip flops
13. Design a combinational circuit for verifying Demorgan’s theorems and implement it
using digital logic gates.
Aim/Principle/ Tabulation/ Calculatio Viva-Voce Recor Total
Apparatus Circuit/ n& d
Page 3 of
required/Procedure Program/ Results
Drawing
25 35 20 10 10 100
15. Design and construct a 4 bit Synchronous up counter using JK flip flops
Aim/Principle/ Tabulation/ Calculatio Viva-Voce Recor Total
Apparatus Circuit/ n& d
required/Procedure Program/ Results
Drawing
25 35 20 10 10 100
Page 4 of