Scribd
Upload
39 views2 pages

Sample Final Practical Assessment

Practical assesment

Uploaded by

kartavya.kg777
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

Sample Final Practical Assessment

Practical assesment

Uploaded by

kartavya.kg777
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Sample Final Practical Assessment

2020-HS1-TNE10006/TNE60006-Networks and Switching-H1

Topology Diagram and Addressing Table

VLAN VLAN Name Network Address


15 Centralbank 213.17.144.128/25
50 Royalmint 165.45.160.0/19
150 Management 55.252.16.240/28

Note: when running this sample assessment on ATC equipment, use Switch 3 for Tokyo, Switch 4
for Lisbon, Router 1 for Nairobi. If on-campus, ask your instructor to connect the Ethernet PC.

Task 1: Configure Device Names and MOTD


• All devices must be configured with a hostname
• All devices must display a MOTD including your student ID

Task 2: Configure VLANs and VLAN membership


• All VLANs must exist on Tokyo and Lisbon
• Ports gi1/0/1-3 in Lisbon must be access ports for the Centralbank VLAN
• Ports gi1/0/11-13 in Lisbon must be access ports for the Royalmint VLAN
• All unused switchports in Lisbon must be disabled

Task 3: Configure Router-on-a-Stick


• Nairobi must be the default gateway router for all VLANs
• The default gateway IP for all VLANs must be the last usable IP
• You must follow best practices for sub-interface ID configuration
• Configure Loopback0 on Nairobi with IP address 53.15.30.33/29
Task 4: Configure Switch Management
• The management IP on Tokyo must be the second-last usable IP
• The management IP on Lisbon must be the third-last usable IP
• Configure SSH access on Lisbon
• Domain name: ccna.lab
• User account details: Username: cisco, Password: cisco

Task 5: Fine-tune STP


• Tokyo must be the root bridge for the Royalmint VLAN
• Lisbon must be the root bridge for the Centralbank VLAN
• Access ports in Lisbon must be portfast ports by default

Task 6: Configure Port-Security


• Gi1/0/3 in Lisbon must be configured with port-security
• Violation mode must be protect
• MAC address learning must be sticky
• Maximum allowed MAC addresses must be set to 2

Task 7: Configure EtherChannel


• The links between Tokyo and Lisbon must be bundled
• The native VLAN must be the Management VLAN
• Use LACP as the link aggregation protocol

Task 8: Additional Settings


• Configure descriptions on all interfaces in Nairobi
• Configure synchronous logging in Lisbon and Tokyo

You might also like