SELF-ASSESSMENT CHECKLIST

Name: Thomas F. Martin

Qualification: Automotive Servicing NC II

INSTRUCTIONS: This Self-Check Instrument will give the trainer necessary data
or information which is essential in Automotive Servicing NCII.
Please check the appropriate box of your answer to the
questions below.

CAN I…? YES NO

BASIC COMPETENCIES
1. Participate in Workplace Communication
1.1 Obtain and convey workplace information /
1.2 Participate in workplace meetings and discussions /
1.3 Complete relevant work related documents /
2. Work in Team Environment
2.1 Describe team role and scope? /
2.2 Identify own role and responsibility within team? /
2.3 Work as a team member? /
3. Practice Career Professionalism
3.1 Integrate personal objectives with organizational goals? /
3.2 Set and meet work priorities? /
3.3 Maintain professional growth and development? /
4. Practice Occupational Health and Safety Procedures
4.1 Identify hazards and risks? /
4.2 Evaluate hazards and risks? /
4.3 Control hazards and risks? /
4.4 Maintain occupational health and safety awareness? /
COMMON COMPETENCIES
1. APPLY APPROPRIATE SEALANT/ADHESIVE
1.1 Identify appropriate Sealant/adhesive /
1.2 Prepare surface for Sealant/adhesive /
1.3 Apply sealant/adhesive evenly /
1.4 Store/Dispose of sealant/adhesive /
2. MOVE AND POSITION VEHICLE /
2.1 Prepare vehicle for driving /
2.2 Move and position vehicle /
2.3 Check the vehicle /
3. PERFORM MENSURATION AND CALCULATION
3.1 Select measuring instruments /
3.2 Carry out measurements and calculation /
3.3 Maintain measuring instruments /
4. READ, INTERPRET AND APPLY SPECIFICATION AND MANUALS
4.1 Identify and access manual/ specification /
4.2 Interpret manuals /
4.3 Apply information in manual /
 4.4 Store manuals /
5. USE AND APPLY LUBRICANTS/COOLANTS
5.1 Identify types of lubricants/ coolants /
5.2 Use and apply lubricants/coolant /
5.3 Perform housekeeping activities pose wastes/used lubricants /
6. PERFORM SHOP MAINTENANCE
6.1 Inspect/clean tools and work area /
6.2 Store/arrange tools and shop equipment /
6.3 Report damaged tools/equipment /
7. PREPARE JOB ESTIMATE/COSTING
7.1 Identify nature/scope of work /
7.2 Prepare and present estimate /
8. INTERPRET/DRAW TECHNICAL DRAWING
8.1 Interpret technical drawing /
8.2 Select correct technical drawing /
8.3 Apply freehand sketching /
9. PRACTICE HEALTH, SAFETY AND ENVIRONMENT
PROCEDURES
9.1 Apply basic safety procedures /
9.2 Apply emergency procedures /
10. INSPECT TECHNICAL QUALITY OF WORK
10.1 Gather information to carry out inspection /
10.2 Inspect and apply quality standards to work /
10.3 Achieve quality work outcomes /
11. MAINTAIN QUALITY SYSTEMS
11.1 Conduct final quality check on completed work / orders /
11.2 Report on the quality of processes and work outcomes /
11.3 Implement improvements to work processes /
12. PROVIDE WORK SKILL INSTRUCTIONS
12.1 Organize instruction and demonstration /
12.2 Conduct instruction and demonstration /
12.3 Check training performance /
12.4 Review personal training performance and finalize /
documentation
13. IDENTIFY AND SELECT ORIGINAL AUTOMOTIVE PARTS AND
PRODUCTS
13.1 Identify the part/product and its end use /
13.2 Identify details of the part/product /
13.3 Part/product is supplied or ordered for customer /
CORE COMPETENCIES
1. SERVICE AUTOMOTIVE BATTERY
1.1 Test automotive battery /
1.2 Remove and replace batteries. /
1.3 Service and charge batteries. /
1.4 Jump-start vehicle. /
2. SERVICE IGNITION SYSTEM
2.1 Check Ignition System /
2.2 Perform spark test /
2.3 Check ignition coil resistance /
2.4 Check ballast resistor /
2.5 Adjust contact point clearance (if any) /
2.6 Perform ignition wiring installation /
2.7 Perform ignition timing /
2.8 Repair non-electronic ignition system and/or components /
3. TEST AND REPAIR WIRING/LIGHTING SYSTEMS
3.1 Test electrical systems /
3.2 Repair electrical systems /
3.3 Practice courtesy /
3.4Respect traffic enforcers and other traffic management unit /
4. SERVICE STARTING SYSTEM
4.1 Test system/components and identify faults /
4.2 Repair starting systems associated components /
5. SERVICE CHARGING SYSTEMS
5.1 Test system/components and identify faults /
5.2 Repair charging system associated components /
6. SERVICE ENGINE MECHANICAL SYSTEM
6.1 Service cooling system /
6.2 Service lubricating system /
6.3 Service fuel system /
6.4 Service diesel fuel injector /
7. SERVICE CLUTCH SYSTEM
7.1 Diagnose clutch failure/problem /
7.2 Pull-out and mount clutch Component parts /
7.3 Overhaul hydraulic clutch mechanism /
7.4 Perform clutch parts failure analysis /
7.5 Set/Adjust clutch system components /
7.6 Bleed clutch hydraulic system /
8. SERVICE DIFFERENTIAL AND FRONT/REAR AXLE
8.1 Inspect drive shaft and joint /
8.2 Dismount differential assembly /
8.3 Overhaul differential /
8.4 Mounting differential assembly /
8.5 Overhaul rear/front wheel hub /
8.6 Analyze king pin condition /
 8.7 Inspect/replace I-beam /
9. SERVICE DIFFERENTIAL AND FRONT/REAR AXLE
9.1 Analyze front end geometry failure /
9.2 Service steering system /
9.3 Perform wheel balancing /
9.4 Conduct wheel alignment /
10. SERVICE BRAKE SYSTEM
10.1 Pull-out/mount brake system components /
10.2 Disassemble/assemble brake systemcomponents /
10.3 Conduct road test /
11. SERVICE SUSPENSION SYSTEM
11.1 Diagnose suspension system failure /
11.2 Dismount/mount suspension components parts /
11.3 Disassemble/Assemble suspension parts /
11.4 Inspect/replace suspension component parts /
12. PERFORM UNDERCHASSIS PREVENTIVE MAINTENANCE
12.1 Check clutch fluid and lines /
12.2 Inspect brake system /
12.3 Inspect/change transmission/ differential gear oil /
12.4 Inspect/Replace power steering fluid /
12.5 Check/Re-fill automatic transmission fluid /
12.6 Inspect/Bleed air tank /
12.7 Check tires and tire pressures /
12.8 Check under chassis body bolts and nuts /
13. OVERHAUL MANUALTRANSMISSION
13.1 Diagnose manual transmission failure /
13.2 Pull-out manual transmission /
13.3 Disassemble manual transmission /
13.4 Inspect manual transmission parts /
13.5 Assemble manual transmission /
13.6 Test manual transmission /
13.7 Road test transmission /