9/18/21, 8:01 AM Control Systems - Signal Flow Graphs

Control Systems - Signal Flow Graphs

Signal flow graph is a graphical representation of algebraic equations. In this chapter, let us
discuss the basic concepts related signal flow graph and also learn how to draw signal flow
graphs.

Basic Elements of Signal Flow Graph

Nodes and branches are the basic elements of signal flow graph.

Node

Node is a point which represents either a variable or a signal. There are three types of nodes —
input node, output node and mixed node.

Input Node − It is a node, which has only outgoing branches.

Output Node − It is a node, which has only incoming branches.

Mixed Node − It is a node, which has both incoming and outgoing branches.

Example

Let us consider the following signal flow graph to identify these nodes.

The nodes present in this signal flow graph are y1, y2, y3 and y4.
y1 and y4 are the input node and output node respectively.
y2 and y3 are mixed nodes.

Branch

Branch is a line segment which joins two nodes. It has both gain and direction. For example,
there are four branches in the above signal flow graph. These branches have gains of a, b, c
and -d.

Construction of Signal Flow Graph

https://www.tutorialspoint.com/control_systems/control_systems_signal_flow_graphs.htm 1/4
9/18/21, 8:01 AM Control Systems - Signal Flow Graphs

Let us construct a signal flow graph by considering the following algebraic equations −

y 2 = a 12y 1 + a 42y 4

y 3 = a 23y 2 + a 53y 5

y 4 = a 34y 3

y 5 = a 45y 4 + a 35y 3

y 6 = a 56y 5

There will be six nodes (y1, y2, y3, y4, y5 and y6) and eight branches in this signal flow graph.
The gains of the branches are a12, a23, a34, a45, a56, a42, a53 and a35.
To get the overall signal flow graph, draw the signal flow graph for each equation, then combine
all these signal flow graphs and then follow the steps given below −

Step 1 − Signal flow graph for y 2 = a 13y 1 + a 42y 4 is shown in the following figure.

Step 2 − Signal flow graph for y 3 = a 23y 2 + a 53y 5 is shown in the following figure.

Step 3 − Signal flow graph for y 4 = a 34y 3 is shown in the following figure.

https://www.tutorialspoint.com/control_systems/control_systems_signal_flow_graphs.htm 2/4
9/18/21, 8:01 AM Control Systems - Signal Flow Graphs

Step 4 − Signal flow graph for y 5 = a 45y 4 + a 35y 3 is shown in the following figure.

Step 5 − Signal flow graph for y 6 = a 56y 5 is shown in the following figure.

Step 6 − Signal flow graph of overall system is shown in the following figure.

Conversion of Block Diagrams into Signal Flow Graphs

Follow these steps for converting a block diagram into its equivalent signal flow graph.

Represent all the signals, variables, summing points and take-off points of block
diagram as nodes in signal flow graph.
Represent the blocks of block diagram as branches in signal flow graph.
Represent the transfer functions inside the blocks of block diagram as gains of the
branches in signal flow graph.
Connect the nodes as per the block diagram. If there is connection between two nodes
(but there is no block in between), then represent the gain of the branch as one. For

https://www.tutorialspoint.com/control_systems/control_systems_signal_flow_graphs.htm 3/4
9/18/21, 8:01 AM Control Systems - Signal Flow Graphs

example, between summing points, between summing point and takeoff point, between
input and summing point, between take-off point and output.

Example

Let us convert the following block diagram into its equivalent signal flow graph.

Represent the input signal R(s) and output signal C(s) of block diagram as input node R(s) and
output node C(s) of signal flow graph.
Just for reference, the remaining nodes (y1 to y9) are labelled in the block diagram. There are
nine nodes other than input and output nodes. That is four nodes for four summing points, four
nodes for four take-off points and one node for the variable between blocks G 1 and G 2.

The following figure shows the equivalent signal flow graph.

With the help of Mason’s gain formula (discussed in the next chapter), you can calculate the
transfer function of this signal flow graph. This is the advantage of signal flow graphs. Here, we
no need to simplify (reduce) the signal flow graphs for calculating the transfer function.

https://www.tutorialspoint.com/control_systems/control_systems_signal_flow_graphs.htm 4/4