Figure 1. Cisco 4400 Series Wireless LAN Controller
Figure 1. Cisco 4400 Series Wireless LAN Controller
Figure 1. Cisco 4400 Series Wireless LAN Controller
Because the Cisco 4400 Series Wireless LAN Controller supports 802.11a/b/g and the IEEE 802.11n draft 2.0 standard, organizations can deploy the solution that best meets their individual requirements. Organizations can offer robust coverage with 802.11 a/b/g or deliver greater performance with 5x the throughput and unprecedented reliability using 802.11n and Cisco's NextGeneration Wireless Solutions and Cisco Enterprise Wireless Mesh. The Cisco 4400 Series Wireless LAN Controller is available in two models. The Cisco 4402 Wireless LAN Controller with two 1 GB Ethernet ports comes in configurations that support 12, 25, and 50 access points. The Cisco 4404 Wireless LAN Controller with four 1 GB Ethernet ports supports 100 access points. The Cisco 4402 controller provides one expansion slot. The Cisco 4404 controller provides two expansion slots that can be used to add VPN termination today, as well as enhanced functionality in the future. In addition, each Cisco 4400 WLAN Controller supports an optional redundant power supply to ensure maximum availability.
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Data Sheet
Product Specifications
Table 1 lists the product specification for Cisco 4400 Series wireless LAN controllers.
Table 1.
Item Wireless Wired/Switching/Routing Data Request For Comments (RFC)
Security Standards
WPA IEEE 802.11i (WPA2, RSN) RFC 1321 MD5 Message-Digest Algorithm RFC 1851 The ESP Triple DES Transform RFC 2104 HMAC: Keyed Hashing for Message Authentication RFC 2246 TLS Protocol Version 1.0 RFC 2401 Security Architecture for the Internet Protocol RFC 2403 HMAC-MD5-96 within ESP and AH RFC 2404 HMAC-SHA-1-96 within ESP and AH RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV RFC 2406 IPsec RFC 2407 Interpretation for ISAKMP RFC 2408 ISAKMP RFC 2409 IKE RFC 2451 ESP CBC-Mode Cipher Algorithms RFC 3280 Internet X.509 PKI Certificate and CRL Profile RFC 3602 The AES-CBC Cipher Algorithm and Its Use with IPsec RFC 3686 Using AES Counter Mode with IPsec ESP
Encryption
WEP and TKIP-MIC: RC4 40, 104 and 128 bits (both static and shared keys) SSL and TLS: RC4 128-bit and RSA 1024- and 2048-bit AES: CCM, CCMP IPSec: DES-CBC, 3DES, AES-CBC
IEEE 802.1X RFC 2548 Microsoft Vendor-Specific RADIUS Attributes RFC 2716 PPP EAP-TLS RFC 2865 RADIUS Authentication RFC 2866 RADIUS Accounting RFC 2867 RADIUS Tunnel Accounting RFC 2869 RADIUS Extensions RFC 3576 Dynamic Authorization Extensions to RADIUS RFC 3579 RADIUS Support for EAP RFC 3580 IEEE 802.1X RADIUS Guidelines RFC 3748 Extensible Authentication Protocol Web-based authentication
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 4
Data Sheet
Item Management
Specification SNMP v1, v2c, v3 RFC 854 Telnet RFC 1155 Management Information for TCP/IP-Based Internets RFC 1156 MIB RFC 1157 SNMP RFC 1213 SNMP MIB II RFC 1350 TFTP RFC 1643 Ethernet MIB RFC 2030 SNTP RFC 2616 HTTP RFC 2665 Ethernet-Like Interface types MIB RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual LAN Extensions RFC 2819 RMON MIB RFC 2863 Interfaces Group MIB RFC 3164 Syslog RFC 3414 User-Based Security Model (USM) for SNMPv3 RFC 3418 MIB for SNMP RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs Cisco private MIBs
Management Interfaces
Web-based: HTTP/HTTPS Command-line interface: Telnet, SSH, serial port Uplink: 2 (4402) or 4 (4404) 1000Base-X transceiver slots LED indicators: link, activity Service Port: 10/100 Mbps Ethernet (RJ45) LED indicators: link, activity Utility Port: 10/100/1000 Mbps Ethernet (RJ45) LED indicators: link, activity Expansion Slots: 1 (4402) or 2 (4404) Console Port: RS232 (DB-9 male, DTE interface) Other Indicators: Status, Alarm, Power Supply 1, Power Supply 2
Dimensions (WxDxH): 17.45 x 15.75 x 1.75 in. (443 x 400 x 44.5 mm) Weight: 15.3 lbs (6.95 kg) with 2 power supplies Temperature: Operating: 32 to 104 (0 to 40 F C) Storage: -13 to 158 (-25 to 70 F C) Humidity: Operating humidity: 10 95%, non-condensing Storage humidity: up to 95% Input power: 100 240 VAC; 50/60 Hz; 0.43 A at 110 VAC, 0.23 A at 220 VAC; 50W. Redundant power option available. Heat Dissipation: 171 BTU/hour
Regulatory Compliance
CE Mark Safety: UL 60950-1:2003 EN 60950:2000 EMI and susceptibility (Class A): U.S.: FCC Part 15.107 and 15.109 Canada: ICES-003 Japan: VCCI Europe: EN 55022, EN 55024
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Data Sheet
Ordering Information
Table 2 provides ordering information for the Cisco 4400 Series. To place an order, visit the Cisco Ordering Website: http://www.cisco.com/en/US/ordering/index.shtml
Table 2. Ordering Information for Cisco 4400 Series Wireless LAN Controllers
Product Name 4400 Series WLAN Controller for up to 12 Cisco access points 4400 Series WLAN Controller for up to 25 Cisco access points 4400 Series WLAN Controller for up to 50 Cisco access points 4400 Series WLAN Controller for up to 100 Cisco access points 4400 Series WLAN Controller AC Power Supply (redundant)
Summary
The Cisco 4400 Series Wireless LAN Controller is ideal for enterprise and service provider wireless LAN deployments. It simplifies deployment and operation of wireless networks, helping to ensure smooth performance, enhance security, and maximize network availability. The Cisco 4400 Series Wireless LAN Controller manages all of the Cisco access points within campus environments and branch locations, eliminating complexity and providing network administrators with visibility and control of their wireless LANs.
Printed in USA
C78-332267-06
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 4