Production Engineering

RAJASTHAN TECHNICAL UNIVERSITY, KOTA
Scheme of
POSTGRADUATE DEGREE COURSE
M.Tech. I to IV Semester
Production Engineering
(Effective from academic session: 2020-21)
Rajasthan Technical University, Kota

Akelgarh, Rawatbhata Road, Kota-324010
Semester - I
Contact Marks
Hours
Course Course per
SN Course Name Week Credits
Type Code
Exam IA ETE Total
L T P
Hrs
Machining
1 PCC 1MPD1-01 Processes and 3 0 0 3 30 70 100 3
Analysis
Automation and
2 PCC 1MPD1-02 Computer Aided 3 0 0 3 30 70 100 3
Manufacturing
Casting and
1MPD2-11 Welding
Technologies
3 PEC 1MPD2-12 Industrial Robotics 3 0 0 3 30 70 100 3
Simulation
1MPD2-13 Modeling and
Analysis
Plastic
1MPD2-14 Manufacturing
Processes
4 PEC Metrology & 3 0 0 3 30 70 100 3
1MPD2-15 Computer Aided
Inspection
1MPD2-16 Quality Systems

Research
5 MCC 1MCC4-21 Methodology and 2 0 0 2 30 70 100 2
IPR
Machining
6 PCC 1MPD1-06 Processes and 0 0 4 4 60 40 100 2
Analysis Lab
7 PCC 1MPD1-07 CAM Lab 0 0 4 4 60 40 100 2
SOCIAL Outreach
8 Discipline & Extra
SODECA 1MPD5-00 100 2
Curriculum
Activities
Total 270 430 800 20

Semester - II
Contact Marks
Hours
Course Course per
Type Code
Exam
L T P IA ETE Total
Hrs
Modern Machining
1 PCC 2MPD1-01 3 0 0 3 30 70 100 3
Processes
Metal Forming
2 PCC 2MPD1-02 3 0 0 3 30 70 100 3
Analysis
Fabrication
3 2MPD2-11 Techniques of Advance
& Smart Materials
Computer Integrated
PEC 3 0 0 3 30 70 100 3
4 2MPD2-12 Manufacturing
Systems
Operations and Supply

5 2MPD2-13
Chain Management
Rapid Product
Development
6 2MPD2-14
Technologies
PEC 30 70 100
Lean, Six Sigma and 3 0 0 3 3
7 2MPD2-15 Sustainable
Manufacturing
8 2MPD2-16 Design of Experiments
Audit Course-I
9 MCC 2MCC3-XX 2 0 0
Modern Machining
10 PCC 2MPD1-06 0 0 4 4 60 40 100 2
Processes Lab
Metal Forming
11 PCC 2MPD1-07 0 0 4 4 60 40 100 2
Analysis Lab
12 REW 2MPD4-50 Mini Project 0 0 4 4 60 40 100 2
SOCIAL Outreach
13 SODECA 2MPD5-00 Discipline & Extra 100 2
Curriculum Activities
Total 300 300 800 20

Semester - III
Contact Marks
Hours
Course Course per
Type Code
Exam IA ETE Total
L T P
Hrs
Micro and
Precision
1 3MPD2-11
Manufacturing
Systems
Mechatronic
2 PEC 3MPD2-12 Systems Design 3 0 0 3 30 70 100 3
and Applications
Innovation and
3 3MPD2-13 Entrepreneurship
for Engineers
4 MCC 3MCC3-XX Open Elective 3 0 0 3 30 70 100 3
5 MCC 3MCC3-XX Audit Course-II 2 0 0
Dissertation-I /
6 REW 3MPD4-60 0 0 20 240 160 400 10
Industrial Project
Total 300 300 600 16

Semester - IV
Contact Marks
Hours
Course Course per
SN Course Name Week Cr
Type Code
Exam IA ETE Total
L T P
Hrs
1 REW 3MPD4-70 Dissertation-II 0 0 32 360 240 600 16
Total 360 240 600 16

1MPD1-01: Machining Processes and Analysis

Credit: 3 Max. Marks: 100(IA:30 ETE:70)
3L+0T+0P End Term Exam: 3 Hours
SN Contents Hours
1 Introduction: Objective, scope and outcome of the course.

Machining; Plastic Deformation, Tensile Test, Stress and 2
Strain
2 Types of machining processes; Chip formation; Orthogonal
and Oblique Cutting; Types of Chips; Built-up edge 2
formation.
3 Reference planes; Tool specification: American System (ASA),

continental or Orthogonal System (ORS), International or
Normal Rake system (NRS); Tool angle relationships in ORS, 4
ASA and NRS; Selection of Tool Angles; Multiple-point
cutting tools: twist drill, helical milling cutter
4 Merchant's Circle Diagram; Co-efficient of Friction:

Determination of stress, strain and strain rate; Measurement
4
of shear angle; Thin Zone model: Lee and Shaffer's
Relationship.
5 Nature of sliding friction; Friction in Metal Cutting: Sticking

and Sliding Zones, Analysis of Stress Distribution on the tool 3
face: Zorev’s model; Determination of mean angle of friction.
6 Rake angles in oblique cutting: Analytical determination of
Normal Rake angle, velocity rake angle and effective rake
4
angle; their relationship; shear angles in oblique cutting;
velocity relationship; Force relationships in oblique cutting.
7 Turning, shaping and planning, Slab milling, Drilling:

Machining Parameters, force magnitudes, power 4
consumption, material removal rate, time per pass.
8 Basic methods of measurement: Axially Loaded members,

Cantilever Beam, Rings and Octagon, dynamometer 2
requirements; machine tool dynamometers.
9 Tool angles; Measurement of cutting forces in turning and
grinding; Measurement of temperature; chip thickness ratio; 3
grain concentration in grinding.
Minimum Production Cost Criterion; Maximum Production

Rate Criterion, and Maximum Profit Rate Criterion.
10 Restrictions on cutting conditions: maximum power 4
restriction, speed restriction, force and vibration restriction,
surface finish restriction.
Distinct regions of heat generation; Equations of Heat Flow:

heat Flow due to conduction, heat flow due to transportation,
11 heat absorbed and heat generated; Average Shear Plane 4
temperature; Average Chip-tool interface Temperature;
Experimental determination of cutting temperatures.
Introduction: Types of abrasive machining processes;

Grinding; types and characteristics; characteristics and
12 specification of grinding wheels; Mechanics of Grinding 4
Process; Determination of chip length in Grinding; Size effect;
Wheel wear; Thermal Analysis; Honing and Lapping.
Total 40
TEXT BOOK
A.Ghosh and Asok Mallik, “Machining Science” Affiliated East-West Press
1
REFERENCE BOOKS
SN Name of Authors /Books /Publisher
1 E.J.A. Armarego and R.H.Brown-The machining of Metals
2 G Boothroyd-Fundamentals of Metal Machining and Machine tools
3 M.C.Shaw-Metal Cutting Principle
4 G.K.Lal and S.K.Choudhury-Fundamental of Manufacturing Processes

1MPD1-02: Automation and Computer Aided Manufacturing

SN Contents Hours
1 Introduction: Objective, scope and outcome of the course. 1
2 Automation: Automation production system, Mechanization and
automation, Types of automation, Automation strategies,
6
Mechanical, electrical, hydraulic and Pneumatic automation
devices and controls, Economics of automation.
3 Computer Numerical Control (CNC): Introduction, Numerical
Control, Numerical Control Modes, Numerical Control Elements,
NC Machine Tools.
CNC Hardware Basics: Structure of CNC Machine Tools, Spindle
Design, drives, Actuation Systems, Feedback Devices, Axes-
standards.
10
CNC Tooling: Cutting tool materials, Turning-Tool geometry, Milling
Tooling Systems, Tool Presetting, Automatic Tool Changers, Work
holding, cutting – process parameter selection.
CNC Machine Tools and Control Systems: CNC machining Centers,
CNC Turning Centers, High Speed Machine Tools, Machine Control
Unit, Support Systems. Touch-Trigger Probes.
4 CNC Programming: Part programming Fundamentals, manual part-
programming methods, preparatory functions, Miscellaneous
functions, Program number, tool-length compensation, canned
cycles, and cutter-radius compensation.
Turning-Centre Programming: Comparison between machining
centres and turning centres, tape formats, axes system, general
programming functions, motion commands, cut planning, thread
cutting, canned cycles. 12
Advanced part-programming methods: polar coordinates,
parameters, looping and jumping, subroutines, mirror imaging and
scaling, special canned cycles.
Computer –Aided Part Programming: concept of CAP, APT language
structure, geometry commands, motion commands, postprocessor
commands, compilation control commands, repetitive
programming, complete part program in APT, CAM systems.
5 Information Requirement of Manufacturing: Discrete part
Manufacture, information requirements of a production
organization, manufacturing strategies, integration requirements. 11
Computer Aided Process Planning: Process planning, computer

aided process planning, CAPP implementation techniques,

concurrent engineering and design for manufacturing, advanced
manufacturing planning.
Production Planning and Control: introduction, production

planning, capacity planning, master production schedule, material
requirement planning (MRP), production activity control (PAC),
optimised production technology (OPT), manufacturing Resource
Planning (MRP II), Just in Time (JIT).
Total 40
TEXT BOOK
P.N. Rao, CAD/CAM: Principles and applications, 3rd Edition, Tata McGraw Hill Education
1
Private Limited, New Delhi, 2011
REFERENCE BOOKS
1 Yoram Koren, "Computer Control of Manufacturing Systems", McGraw Hill Book Co. New
Delhi, 1986
2 Radhakrishnan P., "Computer Numerical Control Machines", New Book Agency, Calcutta,
1991
3 P.N. Rao, N.K. Tewari, T.K. Kundra “Computer Aided Manufacturing” Tata McGraw Hill
Publishing Co. Ltd
4. Mikell P. Groover, “Automation, Production Systems and Computer-Integrated
Manufacturing, 2nd Edition, Pearson Education Asia, 2001.
1MPD2-11: Casting and Welding Technologies

SN Contents Hours
2 Core making processes - design for moulding and casting -

different moulding and casting processes-function of the gating 10
system-permanent mould casting-centrifugal casting- investment
casting-mercast casting-continuous casting-low pressure casting.
3 Melting and quality control of various steels and non-ferrous
7
alloys - casting defects - fettling, inspection and testing of
castings - Manufacturing of Cast irons - Design for casting.
4 Arc welding power sources-Different arc welding processes-solid
state welding process- soldering, Brazing and adhesive bonding 6
– metal surfacing and spraying-thermal cutting processes.
5 Welding metallurgy – weldability criteria – Different types of joint
6
configuration-different types of welding position-design of
weldments and joints.
6 Inspection and testing of welding and casting – Defects,
Destructive tests - Non destructive testing techniques – surface 10
treatments-safety aspects in welding processes- specific welding
applications and innovations.
Total 40
TEXT BOOK
Scrope Kalpakjian,, “Manufacturing processes for Engineering Materials”, Addision Wesley,
1
1997.
REFERENCE BOOKS
1 R.S. Parmar “Welding processes and technology” Khanna Publishers
2 Heine, Loper and Rosenthal Principles of Metal Castings TMH
3 A.Ghosh and Ashok Mallik, “Machining Science” Affiliated East-West Press
1MPD2-12: Industrial Robotics

SN Contents Hours
Introduction: Objective, scope and outcome of the course.

Fundamentals of robotics: Automation, Robot Anatomy, work 4
1
volume, robot drive systems, control systems, precision of
movement, end effectors, robotic sensors, robot applications.
2 Robot Technology: The Robot and its peripherals: Control
systems and components, robot motion and analysis and control, 6
Robot End Effectors, sensors in robotics Machine vision.
3 Robot Programming and Languages: Methods of robot
programming, lead through programming, A robot program as a
path in space, Motion interpolation, capabilities and limitations of
leadthrough programming. 12
The textual robot languages, generations of programming languages,
Robot language structure, motion commands, End Effectors and
sensor commands, program control and subroutines, monitor mode
commands. Artificial Intelligence.
4 Robot Applications in Manufacturing: Material Transfer and
machine loading/unloading: General considerations in robot
material handling, material transfer applications and machine 12
loading/unloading. Processing operations like- spot welding,
continuous arc welding spray coating and other processing
operations using robots, Assembly and Inspection
5 Implementation Principles and Issues: An Approach for
implementing Robotics, safety, training, maintenance and quality.
6
Social issue and the future of robotics: Social and labor issues,
robotics Technology of the future and future applications.
Total 40
TEXT BOOK
Groover, Weiss, Nagel, Odrey and Dutta, "Industrial Robotics Technology, Programming and
1
Applications (McGraw Hill Education.)
REFERENCE BOOKS
1 Pessen, David W.(1990), "Industrial Automation, Circuit Design & Components", (John Wiley&
Sons, Singapore)
2 Koren, Yoram "Robotics for Engineers", (McGraw Hill)
1MPD2-13: Simulation Modeling and Analysis

SN Contents Hours
Physical modeling: Concept of system and environment, continuous

and discrete system, linear and nonlinear system, stochastic
activities, static and dynamic models, principles used in modeling,
8
Basic simulation modelling.
Role of simulation in model evaluation and studies, Advantages and

Disadvantages of simulation. Modeling of Systems, iconic analog.
Mathematical Modeling.
2 Computer system simulation: Technique of simulation, Monte Carlo

method, experimental nature of simulation, numerical computation
techniques, continuous system models, analog and hybrid simulation,
feedback systems. 8
Buildings simulation models of waiting line system, Job shop, material

handling and flexible manufacturing systems
3 Probability concepts in simulation: Stochastic variables, discrete and

continuous probability functions mainly Normal, lognormal, Weibull,
exponential, Uniform, Poisson, Binomial, Triangular, Erlang etc.
Random Numbers: Properties, Generations methods, Tests for
Random number- Frequency test, Runs test, Autocorrelation test. 8
Random Variate Generation: Inverse Transform Technique-
Exponential, Uniform, Weibull, Triangular distributions, Direct
transformation for Normal and log normal Distributions, convolution
methods- Erlang distribution, Acceptance Rejection Technique
4 Input Modelling: Data collection, Identification and distribution with

data, parameter estimation, Goodness of fit tests, Selection of input
models without data, Multivariate and time series analysis. 8
Verification and validation: Design of simulation experiments,
validation of experimental models, testing and analysis.
5 Output Analysis: Types of Simulations with Respect to Output

Analysis, Stochastic Nature of output data, Measures of Performance
and their estimation, Output analysis of terminating simulation,
Output analysis of steady state simulations.
8
Selection of Simulation Software, Simulation packages, Trend in
Simulation. Do modeling using ARENA software which is freely
available. Some more suggested simulation packages are Promodel,
Quest, Witness, Extend, Simio etc. Students can learn any one of them.
Total 40
TEXT BOOK
Simulation Modelling and Analysis by Law, A.M. & Kelton , McGraw Hill, 2nd
1
Edition
REFERENCE BOOKS
1 Simulation Modeling and Analysis with ARENA, Altiok and Melamed, Academic
Press
2 Simulation Modeling and ARENA, Rossetti and Taha, John Wiley and Sons
3 Discrete-Event System Simulation, Banks and Carsan, Prentice Hall of India
4 Simulation with ARENA, Keltan, Sadowski and Turrock, McGraw Hill
1MPD2-14: Plastic Manufacturing Processes

SN Contents Hours
2 Classification of plastic materials - physical and mechanical

properties - selection of plastics for various applications - 5
advantages and limitations of using plastics.
3 Viscoelastic behavior - mathematical models for viscoelastic
behavior -deformation behavior of plastics - reinforced plastics - 10
analysis of polymer melt flow
4 Polymer processing techniques such as extrusion, compression

and transfer molding - Injection molding - blow molding - 12
thermoforming -rotational molding – calendaring - Bag molding-
reaction molding- Computer application in plastic molding.
5 Methodical mold design - determination of economical
number of cavities - temperature control of injection molds - 12
calculation of mold opening force and ejection force - die design
for simple components.
Total 40
TEXT BOOK
1 E.B Seamour, Modern Plastics Moulding, John Wiley
REFERENCE BOOKS
1 S Kalpakjian, S. R. Schmid, Manufacturing Engineering & Technology, Pearson Education
Canada
2 A.W. Birley, B. Howarth, Hana, "Mechanics of plastics processing properties
1MPD2-15: Metrology & Computer Aided Inspection

SN Contents Hours

Metrology and Techniques: Standards in metrology, definitions,
Traceability, Characteristics Length & Angular measurements-
8
Review of standard instruments, GD and tolerance procedure-
Review of dimension & form tolerance and methods of
measurement, Tolerance analysis, Surface metrology-
Instruments, Methods and new approaches.
2 Laser Applications in Metrology: LASER light source, LASER
interferometer, LASER alignment telescope, LASER micrometer,
On-line and in-process measurements of diameter, Roundness and 8
surface roughness using LASER, Micro holes and topography
measurements.
3 Special Measuring Instruments and Techniques: Optoelectronic
devices, contact and non-contact types, Applications in on-line
and in-process monitoring systems, Tool wear measurement,
Surface measurement, Machine vision, shape identification, 8
Edge detection techniques, Normalisation, gray scale correlation,
Template Techniques, Surface roughness using vision system,
Interfacing robot and image processing system.
4 Co-ordinate Measuring Machine: Types of CMM, Probes used,
Applications, Non-contact CMM using electro optical sensors for
dimensional metrology, Non-contact sensors for surface finish 8
measurements, statistical evaluation of data using computer, Data
integration of CMM and data logging in computers.
5 Sensors in Inspection: Manufacturing applications of photo
detectors, deflection methods-beam detection, Reflex detection, &
Proximity detection, Applications of Inductive and Capacitive
proximity sensors, Understanding microwave sensing 8
applications laser sensors and limit switches. Advanced sensor
technology-Bar code systems, Principles and applications of
Colour sensors, electro-magnetic identifier, Tactile sensors,
Ultrasonic sensors, Odour sensors
Total 40
TEXT BOOK
1 Fundamentals of dimensional Metrology T. Busch and R. Harlow Delmar, 3e
REFERENCE BOOKS
1 Engineering Metrology G. Thomas and G. Butter Worth PUB
2 Sensors and Control systems in Manufacturing Sabne Soloman McGraw Hill Book.
1MPD2-16: QUALITY SYSTEMS

SN Contents Hours
2 Introduction to Quality Management: Quality – Concept,
Different Definitions and Dimensions, Inspection, Quality 4
Control, Quality Assurance and Quality Management, Quality
as Wining Strategy, Views of different Quality Gurus, Quality
Cost.
3 Process Quality Improvement: Introduction, Graphical and
statistical techniques for process Quality Improvement,
Graphical tools for data representation, 7QC tools. Control 5
Charts for Attributes and Variables, Random and assignable
causes of variations, Type I & Type II errors. Process capability
analysis. Pattern Analysis, Advanced Control Charting
Techniques
4 Acceptance sampling, OC curve, Acceptance Sampling plans 4
and its design, ISO 2500, MIL-STD-105E, Continuous sampling
Plans, Sequential Sampling
5 Gage and Measurement system analysis, Analysis of Variance 4
(ANOVA), Design and analysis of experiment (DOE),
Introduction to TQM
6 Leadership, Lean and JIT Quality Philosophy, Benchmarking,
Process failure mode and effect analysis (PFMEA), Service 9
Quality, Six sigma for process Improvement, ISO 9001, ISO
14000 and QS 9000, Quality audit, Quality Circles.
7 Product Quality Improvement: Quality Function Deployment, 08
Robust Design and Taguchi Method
8 Design Failure Mode and Effect Analysis, Product Reliability 05
Analysis, Six sigma in product development
Total 40
TEXTBOOK
Amitava Mitra, Fundamentals of Quality Control and Improvement, Prentice
1
Hall
REFERENCE BOOKS
1 Douglas C. Montgomery, Introduction to Statistical Quality Control, Wiley.
2 R.P.Mohanty and R.R.Lakhe, TQM in Service Sector, Jaico Pub.
3 Douglas C. Montgomery, Design & Analysis of Experiments, 5th Edition, Wiley-
India
4 Total Quality Management, Dale H. Besterfield et. al, Pearson.
1MPD1-06: Machining Processes and Analysis Lab
Credit: 2 Max. Marks: 100(IA:60, ETE:40)

SN List of Experiments
1 Measurement of forces in case of milling and grinding operations.
2 Measurement of surface roughness in case of milling and grinding operations.

3 Measurement of temperature in case of milling and grinding operations.
4 Exercise on Measurement of Specific cutting energy in turning Process.
5 Exercise on Temperature measurement in drilling.
6 Force analysis in turning.
7 To investigate the effect of material removal rate (MRR), Tool Wear and Surface
roughness on workpiece in turning.
Note: The above list is suggestive. Experiments/case studies may be added relevant to the theory courses taught in the semester.
1MPD1-07: CAM Lab

1 Practice in part programming and operation of CNC turning machines

making use of subroutine techniques and cycles for rotational
components. Students need to develop manual part program using
G&M code for given rotational components.
2 Practice in part programming and operation of CNC Milling machines

making use of subroutine techniques and cycles for prismatic
components. Students need to develop manual part program using
G&M code for given prismatic components.
3 Practice in part programming and operating a machining center, tool

panning and selection of sequences of operations, tool setting on
machine, practice in computer assisted part programming using APT
programming.
4 Practice in Robot programming and its languages. Robotic simulation

using software. Robot path control, preparation of various reports and
route sheets.
5 Simulation of computer aided manufacturing system using simulation

software such as ARENA or Xcos.
6 Practice in coding a CAPP program for a given part produced through

machining processes using higher level languages such as C++,
python, Prolog etc.
7 Problems on MRP-I, MRP-II to be solved as case study in which data

may be procured from local MSME units.
Note: The above list is suggestive. Experiments/case studies may be added

relevant to the theory courses taught in the semester.
2MPD1-01: Modern Machining Processes

SN Contents Hours

Introduction to manufacturing processes: Overview of non 4
conventional machining processes with (AJM, USM, ECM, EDM,
EBM, LBM, AFM, MRF, MAF, MFP and MRAFF etc.)
2 Introduction to nanofinishing and need of nanofinishing, Abrasive
Flow Finishing (AFF), Introduction to AFF and self deformable
feature, AFF machine elements, Magnetic Abrasive Finishing (MAF), 4
Introduction to MAF, Elements of MAF, Setup and process
parameters for AFF and MAF, Parametric analysis and applications
of MAF and AFF.
3 Non-Traditional Machining Processes(Mechanical): Ultrasonic
Machining, Abrasive Jet Machining, Water Jet Machining, and 6
Abrasive Water Jet Machining; Process details, parametric effects,
recent advancements and modelling.
4 Non-Traditional Machining Processes(Thermal): Electro discharge
Machining, Plasma Arc Machining, Electron Beam Machining, and 8
Laser Beam Machining; process, parameters, recent advances and
modeling.
5 Chemical and Electrochemical processes; Chemical Machining, 4
Electro Chemical Machining and Electrochemical grinding.
6 Hybrid-type systems; Electro Chemical Discharge Machining,
Ultrasonic-assisted Electro Discharge Machining, ELID during
grinding and other types,
High Production Rate Machining and Grinding; Designing suitable 8
tooling, cutting fluid application; alternative processes- hot
machining, stretch machining, etc.; obstacles faced and possible
remedies.
7 Micro and Nano machining, Environment friendly machining.
Intelligent Manufacturing Systems: Fuzzy, Neural Networks, 6
Genetic Algorithms to be applied in smart / digital manufacturing.
Industry 4.0: Cyber Physical Manufacturing System.
Total 40
TEXT BOOK
1 V.K.Jain, Advance Machining Processes, Allied Publisher Bombay
REFERENCE BOOKS
1 "Modern Machining Processes" - P.C. Pandey and H.S. Shan, Tata McGraw-Hill Publication
2 Ghosh and Mallik, Manufacturing Science, EWP Private Ltd.
3 H.A.G. El-Hofy , “Advanced Machining Processes – Nontraditional and Hybrid Machining
Processes” McGraw Hill
4 The Science and Engineering of Micro-fabrication, Stephen P. Campbell, Oxford University
2MPD1-02: Metal Forming Analysis

SN Contents Hours

Different metal forming processes, importance of plasticity in the 2
course.
2 Fundamentals of plasticity, yield and flow, anisotropy, instability,
limit analysis, slipline field theory. Applications to forging, wire and
3
tube drawing, deep drawing, extrusion and rolling. High velocity
forming.
3 Review-Analysis of stress: transformation relations, principal

stresses and directions, maximum normal and shear stresses,
invariants, hydrostatic and deviatoric parts; Analysis of 4
(infinitesimal) strain: transformation relations, principal strains,
invariants, hydrostatic and deviatoric parts; (Infinitesimal) rotation,
Stress-strain relations for isotropic, linearly elastic material.
4 Experimental observations on plasticity: yielding, strain-hardening,
viscoplasticity, temperature softening, Baushinger effect, 3
hysteresis, incompressibility of plastic deformation, anisotropy,
plastic instability.
5 Yield criterion for isotropic materials: von Mises and Tresca yield
criterion, their geometric interpretation, convexity of the yield 3
surfaces, experimental validation.
6 Change in yield criteria due to isotropic hardening: strain
hardening and work hardening hypotheses, experimental validation 2
of the hypotheses.
7 Plastic stress-strain relations for isotropic materials: plastic

potential and associated flow rule, incremental and rate forms of
elasto-plastic stress-strain relations, simplifications for non- 5
hardening and rigid-plastic materials (Prandtl- Reuss and Levy-
Mises relations),Objective measures of stress rate and incremental
stress.
8 Anisotropy: strain rate ratio, normal and planer anisotropies, Hill’s 1
anisotropic yield criterion.
Approximate methods of solving plasticity problems: upper and
9 lower bound methods, slip line field equations, different boundary 3
value problems of slip line method, one example of all 3 methods.
Slab method for sheet and wire drawing processes for predicting
drawing force and die pressure, comparison with Wistreich
10 experimental results, optimum die angle, maximum reduction for 4
non-hardening material, upper bound method for sheet/wire
drawing, slip-line method for sheet drawing, correction for
hardening effect in upper bound and slip line methods.
Slab method for extrusion of rod and sheets for predicting
11 extrusion pressure, upper bound method for sheet/wire extrusion, 4
dead-metal zone for square die, slip-line method for sheet
extrusion.
Slab method for plane strain rolling for predicting roll force and roll
torque, limiting reduction, roll diameter to sheet thickness ratio
and friction coefficient.
12 Slab method for sheet and disc forging processes for predicting 5
forging force, sticking radius, slab method for hollow disc forging,
neutral radius, upper bound method for sheet and disc forging with
and without bulge, slip-line method for sheet forging.
13 Slab method for the flange analysis in deep drawing, limiting 1
drawing ratio for non-hardening materials.
Total 40
TEXT BOOK
1 Metal Forming: Processes and Analysis by B. Avitzur, McGraw-Hill Book Co., 1968
REFERENCE BOOKS
1 The Mathematical Theory of Plasticity by R. Hill, Oxford University Press, 1950
2 Engineering Plasticity by W. Johnson and P.B. Mellor, von Nostrand Co. Ltd, 1972
3 Theory of Plasticity by J. Chakrabarty, McGraw-Hill Book Co., International Edition, 1987
4 Continuum Theory of Plasticity by A.S. Khan and S. Huang, John Wiley and Sons
5
G.W Rowe, Introduction to the Principles of Metalworking, Hodder & Stoughton Educational
6 George Ellwood Dieter, “Mechanical Metallurgy” McGraw-Hill
2MPD2-11: Fabrication Techniques of Advance & Smart Materials

SN Contents Hours
2 Polymers - molding of thermoplastics - plastic sheet forming

process - machining of thermoplastics - Thermosetting plastics - 7
properties, molding processes and machining - other processing
methods for plastics - plastic component design.
3 Rubber: Manufacturing process - Manufacturing techniques,
materials design, sizing, components, building, moulding and 9
vulcanising of tyres - Belting – manufacture and types of hose.
4 Types, processing and manufacturing techniques of Glass vessels 7
5 Ceramic materials - Processing of ceramic products 6
6 Composite materials, Fiber, particulate, whisker reinforced

ceramics, properties of reinforcements and matrix. Manufacturing 10
Techniques and applications of different Composites namely PMC,
MMC and CMC.
Total 40
TEXT BOOK
E. P. DeGarmo, J. T Black, R. A. Kohser, Materials and Processes in Manufacturing, Prentice
1
Hall of India
REFERENCE BOOKS
1 Blow C M,, “Rubber Technology and Manufacturing”, Newman Butterworths, 1977
2 Vanviack L.H, “Physical Ceramics for Engineers”, Addision Wesley Publicxation

2MPD2-12: Computer Integrated Manufacturing Systems

SN Contents Hours
2 Evaluation, hardware and software of CIM - Concurrent

engineering - Advance modeling techniques- Numerical control, 8
Computer Numerical Control, Direct Numerical Control, Adaptive
Control, Communication methods and communication standards.
3 Materials handling and Identification Technologies: introduction to
material handling, material transport systems, automatic guided 8
vehicles, automatic storage and retrieval systems, automatic data
capture.
4 Manufacturing Systems: Introduction to manufacturing systems,
single station manufacturing cells, group technology and cellular
manufacturing, manual assembly lines, transfer lines and similar
automated manufacturing systems, automated assembly systems.
Flexible Manufacturing Systems - computer control and functions - 13

Planning, scheduling and control of FMS - general considerations -
selection, evaluation and control. FMS planning and
implementation issues, quantitative analysis of FMS, CAD/CAM
considerations - planning FMS database. Examples of FMS
installations -Artificial Intelligence and CIM systems.
5 Computer aided Quality Control Systems: introduction to quality
control assurance, statistical process control, inspection principles
and practices, inspection technologies, coordinate measuring
machine, non-contact inspection methods, and integration of
CAQC.
10
Manufacturing Support systems: product design and CAD/CAM in
the production system, lean production and agile manufacturing
Computer Integrated Manufacturing: Historical background,

integration, CIM implementation, benefits of CIM.
Total 40
TEXT BOOK
Mikell P Groover,, “Automation, Production Systems and Computer
1 Integrated Manufacturing”, Prentice Hall,2007
REFERENCE BOOKS
1 Paul Ranky, “Computer Integrated Manufacturing”, Prentice Hall, 2005
2 Donatas T I junclis, Keith E Mekie, “Manufacturing High Technology Hand

Book”, Marcel Decker
3 P.N. Rao, CAD/CAM Principles and applications, McGraw Hill Book Co. New Delhi
2MPD2-13: Operations and Supply Chain Management

SN Contents Hours
2 Introduction to operations management for competitiveness of

corporate - Product life cycle - types of productive systems - process 4
life cycles and technology.
3 Generic enterprise strategies - Role of productivity improvement-
components of operations strategy and its implementation, -Utility 7
theory.
4 Forecasting - inventory planning and control - MRP - operations
scheduling. Product and process design and technological choice - 10
capacity planning - MRP-II - location theory and distribution - work
measurement - facility layout and assembly line balancing.
5 Historical evolution of SCM- Inbound logistics, Operations, 6
Outbound logistics.
6 Forecasting- Inventory strategy- Transportation strategy-
Warehouse management- Information strategy for SCM -
Performance management- Organization design and structure for 12
effective supply chain- Supply chain integration and coordination
strategies.
Total 40
TEXT BOOK
E.E. Adam, Jr. and R.J. Ebert, "Production and Operations Management" Prentice
1 Hall Publication
REFERENCE BOOKS
1 Sunil Chopra, Peter Meindl and Kalra, “Supply Chain Management, Strategy,
Planning, and Operation”, Pearson Education
2 R. Panneerselvam, Production and Operations Management, Prentice Hall India
Learning Private Limited
2MPD2-14: Rapid Product Development Technologies

SN Contents Hours
2 Overview of Rapid Product Development:

Product Developing Cycle, Components of RPD, Classification of
manufacturing processes. Preprocessing: Solid Modeling, Data 4
exchange formats, STL file format, RP Preprocessing.
3 Rapid Prototyping (RP):

Introduction to RP, Need of RP; Basic Principles of RP, Steps in RP,
Process chain in RP in integrated CAD-CAM environment, 7
Advantages of RP, Classifications of different RP techniques,
Selection of RP processes, Issues in RP, Emerging trends.
4 RP Techniques:
Solid RP, liquid RP techniques and Powder RP Techniques -
Process Technology and Comparative study of Selective laser 8
sintering, Selective powder binding, etc.
5 Rapid Tooling (RT):

Introduction to RT, Indirect RT processes – silicon rubber molding,
epoxy tooling, spray metal tooling and investment casting. Direct
RT processes – laminated tooling, powder metallurgy based 5
technologies, welding based technologies, direct pattern making,
emerging trends in RT.
6 Reverse Engineering: 5
Geometric data acquisition, 3D reconstruction.
7 Applications and case
5
studies:
Engineering applications, Medical applications
8 Special Topic on RP:
Programming in RP, Modelling, Slicing, Internal Hatching, Surface 5
Skin Fills, Support Structure.
Overview of the algorithms for RP&T and Reverse Engineering.
Total 40
TEXT BOOK
Chua, C.K., Leong, K.F., Rapid Prototyping: Principles and Applications in Manufacturing, John
1 Wiley and Sons Inc., 2000.
REFERENCE BOOKS
1. Noorani, R., Rapid Prototyping: Principles and Applications, John Wiley & Sons,
Inc., New Jersey, 2006.
2. 2Ali K. Kamrani, Emand Abouel Nasr, “Rapid Prototyping: Theory and
Practice”, Springer
3. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct

Digital Manufacturing by Brent Stucker, David W. Rosen, and Ian Gibson, Springer
4. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital

Manufacturing, Gibson, Ian, Rosen, David, Stucker, Brent, Pearson.
5. Pham, D.T., Demov, S.S., Rapid Manufacturing: The Technologies and Applications
of Rapid Prototyping and Rapid Tooling, Springer-Verlag London Limited, 2001.
6. Hopkinson, N., Hague, R.J.M. and Dickens, P.M., Rapid Manufacturing and
Industrial Revolution for the Digital Age, John Wiley and Sons Ltd, Chichester,
2005.
2MPD2-15: Lean, Six Sigma and Sustainable Manufacturing

SN Contents Hours
2 Objectives of lean manufacturing - key principles and implications

of lean manufacturing - traditional versus lean manufacturing 8
characteristics - concept of takt time, continuous flow, continuous
improvement, single piece flow.
3 Overview of six sigma concept - definition, origin, terms -
Foundations of lean six sigma –four keys, five laws of lean six sigma
-types of lean six sigma - DMAIC versus DMADV –lean six sigma
project selection - Team stages, characteristics of effective teams - 12
six sigma training plan - Six sigma metrics- Common
implementation issues and management strategies-
Implementation steps.
4 Concepts of sustainability and sustainable development – Need for
sustainable development - Components of sustainability- Social,
Economic, Environmental dimensions - Linkages between 9
technology and sustainability - Sustainable Manufacturing –Scope,
Need and Benefits.
5 Tools and Techniques of Sustainable Manufacturing-
Environmental Conscious Quality Function Deployment, Life cycle
assessment, Design for Environment - Design for recycling- 10
Environmental, Economic, Societal and Business indicators -
Concept Models and Various Approaches, Product Sustainability
and Risk/Benefit assessment– Corporate Social Responsibility.
Total 40
TEXT BOOK
G. Atkinson, S. Dietz, E. Neumayer, Handbook of Sustainable Manufacturing.
1. Edward Elgar Publishing Limited
Askin R G, Goldberg J B, Design and Analysis of Lean Production Systems, John
2. Wiley and Sons Inc.
Gopalakrishnan N., Simplified Six Sigma methodology, tools and implementation,
3. PHI Learning Pvt Limited.
REFERENCE BOOKS
1 Hobbs P. Dennis, Lean Manufacturing Implementation, Cengage Learning.
2 Jay Arthur, Lean Six Sigma –Demystified, Tata McGraw Hill Companies Inc
3 Rogers, P.P., Jalal, K.F. and Boyd, J.A., An Introduction to Sustainable

Development, Earthscan, London.
2MPD2-16: Design of Experiments

SN Contents Hours
2 Classification of experimental designs, Analysis of variance

(ANOVA), ANOVA for detecting sources of variation – Statistical 10
procedure for one- way ANOVA, Procedure for two-way ANOVA
3 Planning & management of experiments;- Conventional method for
experiment-One factor at a time (OFAT) experiment - Concept of
design of experiments - Common terms - Designed experiment - 10
Full factorial experiments - main effect analysis, interaction
analysis and results.
4 Fractional factorial experiments - Resolution of design - screening
DoE, practicing with excel and statistical software - Optimizing 10
using Response Surface Methodology (RSM).
5 Taguchi Methods - Difference between conventional DoE and
Taguchi methods -Orthogonal arrays - Taguchi’s Robust parameter 9
design -Noise factors, S/N ratio - Selection of right orthogonal
array.
Total 40
TEXT BOOK
2 Phillip, J. Ross Taguchi Techniques for Quality Engineering, The Tata McGraw-Hill.
REFERENCE BOOKS
1 Douglas C Montgomery, Design and Analysis of Experiment John Wiley & Sons
2 Ranjit Gupta, “Design of Experiments (DOE) Using the Taguchi Approach”- John Wiley &
Sons
2MPD1-06: Modern Machining Processes Lab

1 To investigate the effect of material removal rate (MRR), Tool Wear and Surface
roughness on workpiece and tool on Electrical Discharge Machining (EDM) and rapid
EDM drilling machine
2 Micro drilling using Electrochemical Discharge Machining (ECDM).

3 Machining practice and parametric analyses on USM, EDM, ECM, AJM.
Note: The above list is suggestive. Experiments/case studies may be added relevant to the theory courses being taught in the semester.
2MPD1-07: Metal Forming Analysis Lab

1 Analysis of Forming Process, Slab method, Upper & lower bound, FEM based
simulation, slip line theory
2 Use of CAE platform for Die Design and Simulation.

3 Exercises in modelling and drafting of mechanical components - Assembly using
parametric and feature based packages like Autodesk Inventor® / HyperWorks® etcas
per availability.
4 Analysis of mechanical components – Use of software like Hyperworks® etc., Exercises
shall include analysis of:
a) Mould flow analysis
b) Forming analysis.
Note: The above list is suggestive. Experiments/case studies may be added relevant to the theory courses being taught in the semester.
3MPD2-11: Micro and Precision Manufacturing Systems

SN Contents Hours
2 Overview of Microsystems: Microsystems, typical Microsystems
products, evolution of micro fabrication, Micro systems and micro
electronics, multidisciplinary nature of Microsystems design and
manufacturing, Microsystems and miniaturization, applications of
9
Microsystems in the automotive industry and other industries.
Working Principles of Microsystems: introduction, Microsensors,
Microactuation, MEMS with Microactuators, Microaccelerometers,
Microfluidics.
3 Microsystem Fabrication Processes: introduction, Photolithography
(overview, photoresists and application, light sources, photoresist
development, photoresist removal and postbaking), Ion
implantation, Diffusion, Oxidation (thermal oxidation, silicon
dioxide, thermal oxidation rates, oxide thickness by color),
Chemical Vapor Deposition (working principle of CVD, Chemical
reactions in CVD, rate of deposition, enhanced CVD), physical
vapour deposition – sputtering, deposition by Epitaxy, Etching
(chemical etching, plasma etching), summary of Microfabrication. 10
Overview of Micromanufacturing: introduction, Bulk
Micromanufacturing (overview of etching, isotropic and anisotropic
etching, wet etchants, etch stop, dry etching, comparison of wet
versus dry etching), surface Micromachining (general description,
process in detail, mechanical problems associated with surface
micromachining), The LIGA process (General description of LIGA
process, materials for substrates and photoresists, electroplating,
the SLIGA process.
4 Precision manufacturing- Introduction, concept of accuracy,
tolerance and fits - influence of different factors on the
maintainability of accuracy of the machine tools and the product - 10
compensation of thermal errors and location errors, -effects of
vibration and tool wear, -dimensioning and dimensional chains.
5 Nano finishing- magnetorheological finishing process-micro/nano
finishing with flexible flow of abrasives- Electrolytic In-process
Dressing (ELID) Grinding. Optical microscopy- confocal laser 10
scanning microscopy- Scanning Electron Microscope (SEM)-Atomic
Force Microscope (AFM).
Total 40
TEXT BOOK
Tai-Ran Hsu, “MEMS & Microsystems design and Manufacturing”, 2002, McGraw Hill
1
Education (India) Private Limited
REFERENCE BOOKS
1 I. Fujimasa, "Micromachines: A New Era in Mechanical Engineering", Oxford Science
Publications
2 R.L. Murty, "Precision Engineering in Manufacturing", New Age International Publishers
3 V.K.Jain, “Introduction to Micromachining”, Narosa Publishing House, 2010

3MPD2-12: Mechatronic Systems Design and Applications

SN Contents Hours

Overview of Mechatronics: Historical perspective, Definition,
Applications, Block diagram of Mechatronic system, Functions
of Mechatronics Systems, Design process, systems,
measurement systems, control systems, programmable logic
controller, examples of mechatronic systems. 10
Sensors and T r a n s d u c e r s : Performance terminology,
Displacement, Position, and Proximity Sensors, velocity and
motion, Force and torque sensors, f l u i d Pressure, liquid Flow,
liquid level, Temperature, Light sensors, Smart material sensors,
Micro and Nano sensors, Selection criteria for sensors.
2 Signal conditioning, Operational amplifier, protection, filtering,
wheatstone bridge, pulse modulation.
Digital Signals, Analogue and digital signals, digital-to-analogue
and analogue-to-digital converters, multiplexers, data acquisition,
digital signal processing. 8
Digital Logic, logic gates, applications of logic gates, sequential logic
Data presentation systems: displays, data presentation elements,
magnetic recording, optical recording, displays, data acquisition
systems, measurement systems, testing and calibration.
3 Pneumatic and hydraulic actuation systems: actuation systems,
pneumatic and hydraulic systems, directional control valves,
pressure control valves, cylinders, servo and proportional control
valves, process control valves, rotary actuators.
Mechanical actuation systems: mechanical systems, types of
motion, kinematic chains, cams, gears, ratchet and pawl, belt and 8
chain drives, bearings, mechanical aspects of motor selection.
Electrical actuation systems: electric systems, mechanical
switches, solid-state switches, solenoids, DC motors, AC motors,
and stepper motors.
4 Basic System Models: mathematical models, mechanical system

building blocks, electrical systems building blocks, fluid system
building blocks, and Thermal system building blocks. 8
System Models: Engineering systems, rotational – translational
systems, electromechanical systems, linearity, and hydraulic-
mechanical systems.
Dynamic responses of systems: modeling dynamic systems,
terminology, first-order systems, second order systems,
performance measures of second order system and system
identification
System Transfer Functions: Transfer function, first –order
systems, second order systems, systems in series, systems with
feedback loops, effect of pole location on transient response.
Frequency response: sinusoidal input, phasors, frequency

response, bode plots, performance specifications, and stability.
5 Closed-loop controllers: continuous and discreet control
processes, terminology, two-step mode, proportional mode,
derivative control, integral control, PID controller, digital
controllers, control system performance, controller tuning,
velocity control and adaptive control. 6
Microprocessors: control, microprocessor systems,
microcontrollers, and applications.
Programmable logic controllers: Basic PLC structure, Input/output
processing.
Mechatronic systems: mechatronic designs, case studies.
Total 40
TEXT BOOK
W. Bolton, Mechatronics, Electronic control systems in mechanical and
1
electrical engineering, Pearson Education, 5/e, 2011.
REFERENCE BOOKS
1 David G. Alcaiatore and Michel B. Histand, Introduction to Mechatronics
and Measuring Systems, Mc. Graw Hill Int. Edition, 3/e,
2 James J Allen, Micro Electro Mechanical Systems Design, CRC Press.
3 Craig K. C. and Stolfi, F. R., Introduction to Mechatronic System Design

with Applications, IEEE Educational Activities Department,.
4 Robert H. Bishop. The Mechatronics Handbook, CRC Press, 2/e
5 K P Ramachandran, G K Vijayraghavan and M S Balasundaram, “Integrated

mechanical electronic systems” Wiley India Edition, 2008
3MPD2-13: Innovation and Entrepreneurship for Engineers

SN Contents Hours
1. Introduction: Objective, scope and outcomes of the course. 1
2. Entrepreneurship: Concept and Definitions; Entrepreneurship and 5
Economic Development; Types of Entrepreneurs; Factor Affecting
Entrepreneurial Growth – Economic, Non-Economic Factors; EDP
Programmes; Entrepreneurial Training; Traits/Qualities of an
Entrepreneurs; Manager Vs. Entrepreneur, types of entrepreneurships,
Entrepreneurial myths.
3. Opportunity Identification and Product Selection: Entrepreneurial 8
Opportunity Search and Identification; Criteria to Select a Product;
Conducting Feasibility Studies; Sources of business ideas, launching a
new product; export marketing, Methods of Project Appraisal, Project
Report Preparation; Project Planning and Scheduling. Sources of
finance for entrepreneurs. Procedure for Export and Import. Handicraft
business opportunities in India.
4. Support Institutions and Management of Small Business: MSME- 10
Definition and significance in Indian economy, Registration, NOC from
Pollution Board; Major problems faced by MSME; MSME Schemes,
Challenges and Difficulties in availing MSME Schemes, Development
Commissioner (MSME); Department of Industrial Policy and Promotion
(DIPP); Director of Industries (DIC); KVIC, Coir Board; SIDBI; RIICO,
SIDCO; NSIC, RSIC; Entrepreneurship development institutes:
NIESBUD, IIE, NIMSME, EDI etc; State Financial Corporation SFC;
Venture Capital: Concept, venture capital financing schemes offered by
various financial institutions in India, Legal issues related to forming
business entity, Requirements for formation of a Private/Public Limited
Company. Steps in registration of firms and partnership.
5. Introduction to IPR and patents: Basic concept of intellectual 8
property Rights: Patents, design, trademark, GI, Copyright. Indian
patent system and salient features of patent Act 1970. WTO-TRIPS
agreement: Development of TRIPS Complied Regime in India. Patent
Databases & Patent Information System: WIPO, IPINDIA, USPTO,
Google Patents etc. Novelty searches. Subject matters of patentable
and non-patentable in India. Procedure of patent filing, PCT
application, provisional application, date of priority.
6. Startup: Stages in transforming idea to a startup, Idea – Create, 8
develop and validation. Prototype testing, Developing the product,
developing the team, creating traction for the product, pitching the
startup, Sources for funding of a startup, Pre Seed funding – Business
angles, accelerators, Seed Funding - Angles, venture capitalists, crowd
funding, syndicate investing, SME lending, grants, Accelerator funding.
Mergers and acquisition.
TOTAL 40
TEXT BOOK
Entrepreneurship development small business enterprises, Poornima
1
M Charantimath, Pearson.
2 Understanding Patent Law, Vishnu S. Warrier, LexisNexis.
REFERENCE BOOKS
1. Entrepreneurship, Roy Rajiv, Oxford University Press.
2. Innovation and Entrepreneurship, Drucker. F, Peter, Harper
Business.
3. Entrepreneurship, Robert D. Hisrich, Mathew J. Manimala, Michael P
Peters and Dean A. Shepherd, Tata Mc-Graw Hill Publishing Co. Ltd.
4. Enterpreneurship Development, S.S.Khanka, S.Chand & Co.
5. Small-Scale Industries and Entrepreneurship, Vasant Desai,
Himalaya Publishing House.
6. Entrepreneurship Management, Cynthia, Kaulgud, Aruna, Vikas Publ
7. Entrepreneurship: Ideas in Action, Cynthia L. Greene, Thomson Asia
Pvt.
8. Patent Law in India, M. B. Rao , Manjula Guru, Kluwer Law
International
9. Intellectual Property Law, P Narayan, Eastern Law House
10. Intellectual Property Rights: Drafting,Interpretation of Patent
Specifications and Claims, N.S. Rathore, New India Publishing Agency
11. Handbook on Patent Law - The Patents Act, 1970, LexCampus
12. The Law of Intellectual Property Rights : Introductory, WTO, Patent
Laws, Shiv Sahai Singh, Eastern book Company.
13. Patents Act, 1970, SCC Editorial, Eastern book Company.

Production Engineering

Uploaded by

Copyright:

Available Formats

Production Engineering

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Production Engineering

Uploaded by

Copyright:

Available Formats

RAJASTHAN TECHNICAL UNIVERSITY, KOTA

(Effective from academic session: 2020-21)

Rajasthan Technical University, Kota

3 PEC 1MPD2-12 Industrial Robotics 3 0 0 3 30 70 100 3

1MPD2-16 Quality Systems

Total 270 430 800 20

Operations and Supply

Total 300 300 800 20

4 MCC 3MCC3-XX Open Elective 3 0 0 3 30 70 100 3

5 MCC 3MCC3-XX Audit Course-II 2 0 0

Total 300 300 600 16

Total 360 240 600 16

1MPD1-01: Machining Processes and Analysis

1 Introduction: Objective, scope and outcome of the course.

3 Reference planes; Tool specification: American System (ASA),

4 Merchant's Circle Diagram; Co-efficient of Friction:

5 Nature of sliding friction; Friction in Metal Cutting: Sticking

7 Turning, shaping and planning, Slab milling, Drilling:

8 Basic methods of measurement: Axially Loaded members,

Minimum Production Cost Criterion; Maximum Production

Distinct regions of heat generation; Equations of Heat Flow:

Introduction: Types of abrasive machining processes;

2 G Boothroyd-Fundamentals of Metal Machining and Machine tools

3 M.C.Shaw-Metal Cutting Principle

4 G.K.Lal and S.K.Choudhury-Fundamental of Manufacturing Processes

1MPD1-02: Automation and Computer Aided Manufacturing

Computer Aided Process Planning: Process planning, computer

aided process planning, CAPP implementation techniques,

Production Planning and Control: introduction, production

1MPD2-11: Casting and Welding Technologies

1 Introduction: Objective, scope and outcome of the course. 1

2 Core making processes - design for moulding and casting -

1MPD2-12: Industrial Robotics

Introduction: Objective, scope and outcome of the course.

1MPD2-13: Simulation Modeling and Analysis

1 Introduction: Objective, scope and outcome of the course.

Physical modeling: Concept of system and environment, continuous

Role of simulation in model evaluation and studies, Advantages and

2 Computer system simulation: Technique of simulation, Monte Carlo

Buildings simulation models of waiting line system, Job shop, material

3 Probability concepts in simulation: Stochastic variables, discrete and

4 Input Modelling: Data collection, Identification and distribution with

5 Output Analysis: Types of Simulations with Respect to Output

1MPD2-14: Plastic Manufacturing Processes

1 Introduction: Objective, scope and outcome of the course. 1

2 Classification of plastic materials - physical and mechanical

4 Polymer processing techniques such as extrusion, compression

1MPD2-15: Metrology & Computer Aided Inspection

Credit: 3 Max. Marks: 100(IA:30 ETE:70)

1 Introduction: Objective, scope and outcome of the course.

1MPD2-16: QUALITY SYSTEMS

1MPD1-06: Machining Processes and Analysis Lab

Credit: 2 Max. Marks: 100(IA:60, ETE:40)

1 Measurement of forces in case of milling and grinding operations.

2 Measurement of surface roughness in case of milling and grinding operations.

1MPD1-07: CAM Lab

Credit: 2 Max. Marks: 100(IA:60, ETE:40)

1 Practice in part programming and operation of CNC turning machines

2 Practice in part programming and operation of CNC Milling machines

3 Practice in part programming and operating a machining center, tool