Scribd
Upload
29 views3 pages

Business Gateway - mp264 Quick Start Guide

Uploaded by

hatim.lakhraid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views3 pages

Business Gateway - mp264 Quick Start Guide

Uploaded by

hatim.lakhraid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

COMMANDERGATEWAY

QUICK START GUIDE


> Please read carefully before use.

SAVES BUSINESS
Connecting your gateway to your Business NBN/Fibre Broadband
& Voice Service
This quick start guide is designed to get you up and running quickly with your new gateway.

Power Adaptor

MP26444C630
MP26444C630
Phone Cable
VT4532920
VT4532920
M2
M2

VT4532920
VT4532920
P03
P03
2x Network Cable

Business Fibre Data Port


For NBN connections please refer
to your NBN welcome pack

1. Connect your gateway to the internet by connecting the LAN4/WAN to the NBN Data Port
or the allocated labelled UNI-D on the NBN ONT using the supplied network cable .
2. Connect the second network cable to your computer then to your gateway port labelled LAN1 .
3. Connect your power adaptor to the gateway and your wall outlet. Ensure the gateway is switched on.
4. If you have a Business NBN/Fibre Broadband or Voice Service, delivered over the Commander
Gateway, connect the telephone cable from your existing telephone or telephone system to the
port labelled Phone 1 and / or Phone 2 (refer to your welcome email) .

Configuring Your Gateway


After you have completed steps 1 through 4, your gateway will automatically start talking to our
servers. It will retrieve your login details and other settings during this time, so please leave it
connected and allow up to 10 minutes for your gateway to set up automatically. Your gateway may
reboot during this process.
Once this process has completed, you should have a green light for Status and Broadband (and
Phone if applicable).
Setting up your WiFi Network
Your gateway has WiFi capabilities which means you can connect wireless devices such as laptops,
smartphones and tablets to the gateway in your office, so that you can access the internet through
them wirelessly.
On the back of the gateway you will find your WiFi network name (WiFi SSID) and password (WiFi
Password), you will need these details to connect your devices.

Using the device you would like to connect to your gateway, search for WiFi networks. Once you find
your WiFi network name (or SSID) select that network. You will be prompted to enter a password or
network key. Once you have entered your password you should be connected!
Your connection and WiFi network settings are unique and automatically secure, you can repeat the
above steps on multiple devices that you would like to connect wirelessly.

SAVES BUSINESS

Commander Pty Ltd


ABN 85 136 950 082
Level 10, 452 Flinders St
Melbourne VIC 3000
www.commander.com

You might also like