Cmua Lyn Ar SD 2002 01

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

GRID LOCATION IF IN DOUBT - ASK!

Assembly: Qty: Precamber: Finish:

2001 .-/ MATERIAL LIST 2001 2 C2


2
MARK QTY SECTION LENGTH GRADE WEIGHT(kg) AREA (m ) REMARKS
p2002 1 FL10*50 50 300 0.2 0.0
TOTAL REQ'D FOR ONE ASSEMBLY 0.2 0.0

25 25

1 - 18Ø

25
50

25
50
PLOTTED : 25.07.2024 13:35:10

2 - LOOSE PLATE'S REQUIRED MK'D 2001


Finish = C2
1. ASSEMBLY MARKS TO BE MARKED ON THE TOP FACE, LEFT HAND END. Christchurch - New Zealand
MODEL NAME : 24-024 - Te Kaha Stadium - Lyndon Eng

COPYRIGHT
N/S = NEAR SIDE O/A = OVERALL 2. ALL HOLES 22mm Ø FOR 20mm Ø 8.8 S BOLTS U.N.O. p: +64 3 943 2240
THE CONCEPTS AND
3. ALL WELDING 6mm CONT. FILLET U.N.O. www.idetail.co.nz
F/S = FAR SIDE FLG. = FLANGE INFORMATION CONTAINED
GENERAL NOTES
ABBREVIATIONS

IN THIS DOCUMENT ARE


4. ALL NOTCHES TO HAVE 11mm RADIUS AT INTERNAL CORNERS. CLIENT: PROJECT:
REVISIONS

THE COPYRIGHT OF
B/S = BOTH SIDES TYP. = TYPICAL
5. ALL TREATMENT AND PAINTING AS PER SPEC.AS 1627.4 Sa 2.5
.......................... IDETAIL PTY. LTD. TE KAHA
USE OR COPYING OF THE
CL = CENTRE LINE GA. = GAUGE
C2 U.N.O.
..................................................................................................................... DOCUMENT IN WHOLE OR
220 MADRAS STREET
01 25.07.2024 ISSUED FOR CONSTRUCTION 6. NO PAINT WITHIN 75mm OF HOLES MARKED 8.8 TF BOLTS. IN PART WITHOUT THE CHRISTCHURCH
BTM. = BOTTOM U.N.O. = UNLESS NOTED PERMISSION OF IDETAIL
7. ALL WELDING & STEELWORK IS TO CONFORM PTY. LTD. CONSTITUTES AN SCALE: DRAWING DESCRIPTION:
A 28.05.2024 ISSUED FOR APPROVAL OTHERWISE
TO CURRENT AS/NZS 1554.1 E49XX SP WELD TYPICAL INFRINGEMENT OF
NOT TO SCALE
LOOSE PLATE - PF11 - L01 SOUTH 06
C/C = CROSS CENTRES S.O.E. = SAME OTHER COPYRIGHT
END DRN: CHK: DATE: DRG NO. REV:
8. MINIMUM EDGE DISTANCE TO HOLES TO BE 30mm FOR 22mm Ø HOLES.
No. DATE DESCRIPTION LR SD 28.05.2024 CMUA-LYN-AR-SD-2001 01
idetail Limited. | Steel Detailing / Workshop drawings www.idetail.co.nz | New Zealand +61 3 943 2240
GRID LOCATION IF IN DOUBT - ASK! Assembly: Qty: Precamber: Finish:
MATERIAL LIST 2002 1 C2
2002 .-/-.
2
MARK QTY SECTION LENGTH GRADE WEIGHT(kg) AREA (m ) REMARKS
m2003 1 PFC250*90 2905 300 103.1 2.4 PF11
m2001 1 PFC230*75 2733 300PLUS 68.7 2.0
m2002 1 PFC230*75 2644 300PLUS 66.5 2.0
m2004 1 SHS89*89*5.0 600 C350L0 7.5 0.2
p2001 4 PLT16*80 218 300 8.7 0.2
p2003 1 PLT10*69 218 300 1.2 0.0
p2004 1 PLT10*87 242 300 1.7 0.0
p2005 2 PLT6*83 83 300 0.6 0.0
TOTAL REQ'D FOR ONE ASSEMBLY 258.0 6.9

p2004

p2001

2905

7 75 8
16 214 2445 214 16

PPBW 6 6
6 PPBW
flgs typ. 5 - 14Ø flgs typ. 6
m2003

250
2x p2001
2x p2001
flg flg flg
flg

10 - 14Ø
10 - 14Ø

00

.
m
41

di
k
ec
ch
2894
2904
2993

2993
2733
38 37

A-A
m2002

B 185 6 230 6 185


B

m2001
p2004
2 - 18Ø 185 242 185
10
89

10
p2003 m2004
3 A
m2004
p2005
TO BE SITE DRILLED

37
TO SUIT p2005

45
2745 90 70

TO BE SITE DRILLED
TO SUIT
B-B
ONE - FRAME REQUIRED MK'D 2002
Finish = C2
PORTAL FRAME 11
PLOTTED : 25.07.2024 13:35:11

1. ASSEMBLY MARKS TO BE MARKED ON THE TOP FACE, LEFT HAND END. Christchurch - New Zealand
COPYRIGHT
N/S = NEAR SIDE O/A = OVERALL 2. ALL HOLES 22mm Ø FOR 20mm Ø 8.8 S BOLTS U.N.O. p: +64 3 943 2240
THE CONCEPTS AND
3. ALL WELDING 6mm CONT. FILLET U.N.O. www.idetail.co.nz
F/S = FAR SIDE FLG. = FLANGE INFORMATION CONTAINED
GENERAL NOTES

01 25.07.2024 ISSUED FOR CONSTRUCTION


ABBREVIATIONS

IN THIS DOCUMENT ARE


4. ALL NOTCHES TO HAVE 11mm RADIUS AT INTERNAL CORNERS. CLIENT: PROJECT:
MODEL NAME : 24-024 - Te Kaha Stadium - Lyndon Eng

REVISIONS

THE COPYRIGHT OF
B/S = BOTH SIDES TYP. = TYPICAL
5. ALL TREATMENT AND PAINTING AS PER SPEC.AS 1627.4 Sa 2.5
.......................... IDETAIL PTY. LTD. TE KAHA
B 27.06.2024 RE-ISSUED FOR APPROVAL USE OR COPYING OF THE
CL = CENTRE LINE GA. = GAUGE
C2 U.N.O.
..................................................................................................................... DOCUMENT IN WHOLE OR
220 MADRAS STREET
01 20.06.2024 ISSUED FOR CONSTRUCTION 6. NO PAINT WITHIN 75mm OF HOLES MARKED 8.8 TF BOLTS. IN PART WITHOUT THE CHRISTCHURCH
BTM. = BOTTOM U.N.O. = UNLESS NOTED PERMISSION OF IDETAIL
7. ALL WELDING & STEELWORK IS TO CONFORM PTY. LTD. CONSTITUTES AN SCALE: DRAWING DESCRIPTION:
A 28.05.2024 ISSUED FOR APPROVAL OTHERWISE
TO CURRENT AS/NZS 1554.1 E49XX SP WELD TYPICAL INFRINGEMENT OF
NOT TO SCALE
FRAME - PF11 - L01 SOUTH 06
C/C = CROSS CENTRES S.O.E. = SAME OTHER COPYRIGHT
END DRN: CHK: DATE: DRG NO. REV:
8. MINIMUM EDGE DISTANCE TO HOLES TO BE 30mm FOR 22mm Ø HOLES.
No. DATE DESCRIPTION LR SD 20.06.2024 CMUA-LYN-AR-SD-2002 01
idetail Limited. | Steel Detailing / Workshop drawings www.idetail.co.nz | New Zealand +61 3 943 2240
GRID LOCATION IF IN DOUBT - ASK! Assembly: Qty: Precamber: Finish:

2003 -/-. MATERIAL LIST 2003 4 BLACK


2003 /-.
2
MARK QTY SECTION LENGTH GRADE WEIGHT(kg) AREA (m ) REMARKS
m2005 1 TRD16 274 8.8S 0.4 0.0
pr2001 1 M16_NUT 0 8.8S 0.1 0.0
pr2002 1 M16_WASHER 0 8.8S 0.0 0.0
TOTAL REQ'D FOR ONE ASSEMBLY 0.5 0.0

274
PLOTTED : 25.07.2024 13:35:12

4 - HD_BOLT'S REQUIRED MK'D 2003


Finish = BLACK
1. ASSEMBLY MARKS TO BE MARKED ON THE TOP FACE, LEFT HAND END. Christchurch - New Zealand
MODEL NAME : 24-024 - Te Kaha Stadium - Lyndon Eng

COPYRIGHT
N/S = NEAR SIDE O/A = OVERALL 2. ALL HOLES 22mm Ø FOR 20mm Ø 8.8 S BOLTS U.N.O. p: +64 3 943 2240
THE CONCEPTS AND
3. ALL WELDING 6mm CONT. FILLET U.N.O. www.idetail.co.nz
F/S = FAR SIDE FLG. = FLANGE INFORMATION CONTAINED
GENERAL NOTES
ABBREVIATIONS

IN THIS DOCUMENT ARE


4. ALL NOTCHES TO HAVE 11mm RADIUS AT INTERNAL CORNERS. CLIENT: PROJECT:
REVISIONS

THE COPYRIGHT OF
B/S = BOTH SIDES TYP. = TYPICAL
5. ALL TREATMENT AND PAINTING AS PER SPEC.AS 1627.4 Sa 2.5
.......................... IDETAIL PTY. LTD. TE KAHA
USE OR COPYING OF THE
CL = CENTRE LINE GA. = GAUGE
C2 U.N.O.
..................................................................................................................... DOCUMENT IN WHOLE OR
220 MADRAS STREET
6. NO PAINT WITHIN 75mm OF HOLES MARKED 8.8 TF BOLTS. IN PART WITHOUT THE CHRISTCHURCH
BTM. = BOTTOM U.N.O. = UNLESS NOTED PERMISSION OF IDETAIL
7. ALL WELDING & STEELWORK IS TO CONFORM PTY. LTD. CONSTITUTES AN SCALE: DRAWING DESCRIPTION:
01 25.07.2024 ISSUED FOR CONSTRUCTION OTHERWISE
TO CURRENT AS/NZS 1554.1 E49XX SP WELD TYPICAL INFRINGEMENT OF
NOT TO SCALE
HD_BOLT - PF11 - L01 SOUTH 06
C/C = CROSS CENTRES S.O.E. = SAME OTHER COPYRIGHT
END DRN: CHK: DATE: DRG NO. REV:
8. MINIMUM EDGE DISTANCE TO HOLES TO BE 30mm FOR 22mm Ø HOLES.
No. DATE DESCRIPTION LR SD 25.07.2024 CMUA-LYN-AR-SD-2003 01
idetail Limited. | Steel Detailing / Workshop drawings www.idetail.co.nz | New Zealand +61 3 943 2240
GRID LOCATION IF IN DOUBT - ASK! Assembly: Qty: Precamber: Finish:

2004 -/-. MATERIAL LIST 2004 2 BLACK


2004 /-.
2
MARK QTY SECTION LENGTH GRADE WEIGHT(kg) AREA (m ) REMARKS
m2005 1 TRD16 274 8.8S 0.4 0.0
pr2001 1 M16_NUT 0 8.8S 0.1 0.0
pr2002 1 M16_WASHER 0 8.8S 0.0 0.0
TOTAL REQ'D FOR ONE ASSEMBLY 0.5 0.0

274
PLOTTED : 25.07.2024 13:35:13

2 - HD_BOLT'S REQUIRED MK'D 2004


Finish = BLACK
1. ASSEMBLY MARKS TO BE MARKED ON THE TOP FACE, LEFT HAND END. Christchurch - New Zealand
MODEL NAME : 24-024 - Te Kaha Stadium - Lyndon Eng

COPYRIGHT
N/S = NEAR SIDE O/A = OVERALL 2. ALL HOLES 22mm Ø FOR 20mm Ø 8.8 S BOLTS U.N.O. p: +64 3 943 2240
THE CONCEPTS AND
3. ALL WELDING 6mm CONT. FILLET U.N.O. www.idetail.co.nz
F/S = FAR SIDE FLG. = FLANGE INFORMATION CONTAINED
GENERAL NOTES
ABBREVIATIONS

IN THIS DOCUMENT ARE


4. ALL NOTCHES TO HAVE 11mm RADIUS AT INTERNAL CORNERS. CLIENT: PROJECT:
REVISIONS

THE COPYRIGHT OF
B/S = BOTH SIDES TYP. = TYPICAL
5. ALL TREATMENT AND PAINTING AS PER SPEC.AS 1627.4 Sa 2.5
.......................... IDETAIL PTY. LTD. TE KAHA
USE OR COPYING OF THE
CL = CENTRE LINE GA. = GAUGE
C2 U.N.O.
..................................................................................................................... DOCUMENT IN WHOLE OR
220 MADRAS STREET
6. NO PAINT WITHIN 75mm OF HOLES MARKED 8.8 TF BOLTS. IN PART WITHOUT THE CHRISTCHURCH
BTM. = BOTTOM U.N.O. = UNLESS NOTED PERMISSION OF IDETAIL
7. ALL WELDING & STEELWORK IS TO CONFORM PTY. LTD. CONSTITUTES AN SCALE: DRAWING DESCRIPTION:
01 25.07.2024 ISSUED FOR CONSTRUCTION OTHERWISE
TO CURRENT AS/NZS 1554.1 E49XX SP WELD TYPICAL INFRINGEMENT OF
NOT TO SCALE
HD_BOLT - PF11 - L01 SOUTH 06
C/C = CROSS CENTRES S.O.E. = SAME OTHER COPYRIGHT
END DRN: CHK: DATE: DRG NO. REV:
8. MINIMUM EDGE DISTANCE TO HOLES TO BE 30mm FOR 22mm Ø HOLES.
No. DATE DESCRIPTION LR SD 25.07.2024 CMUA-LYN-AR-SD-2004 01
idetail Limited. | Steel Detailing / Workshop drawings www.idetail.co.nz | New Zealand +61 3 943 2240

You might also like