REFORMER

A N A LY S I S T O O L
Contents

1 Analysis Tool ......................................................................................................................................................................................... 3

1.1 Installation and Setup ............................................................................................................................................................. 3
1.2 Licensing ...................................................................................................................................................................................... 3
1.3 Getting Started with the Analysis Tool ............................................................................................................................. 3
1.4 Creating Your Own Libraries ................................................................................................................................................ 4
1.5 Guidelines for Creating Libraries ........................................................................................................................................ 5
1.6 Using Your Libraries in Reformer Pro ................................................................................................................................ 6
1.7 Sharing Libraries ....................................................................................................................................................................... 6

KROTOS LIMITED IS INCORPORATED AND REGISTERED IN SCOTLAND WITH COMPANY NUMBER SC458616
WHOSE REGISTERED OFFICE IS AT CITYPOINT · 65 HAYMARKET TERRACE · EDINBURGH · EH12 5HD. · UK
1 Analysis Tool
The Analysis Tool is a partner tool for Reformer Pro. This is a powerful
standalone application that allows users to create their own libraries for
use in Reformer Pro.

NB: These libraries will not load in Reformer (only Reformer Pro)

1.1 Installation and Setup

Installing Reformer Pro will also install Reformer Analysis Tool. If you
cannot load or find the Analysis Tool, please re-run your installer or
contact [email protected].

No other additional setup is required.

1.2 Licensing
You need a license for Reformer Pro to use the Analysis Tool. If your
license is not activated, you will not be able to use the Analysis Tool. If
you do not have an active license, you will need to purchase one, or
activate a limited-time free trial of the plugin. This can be done from the

NB: You cannot activate the plugin from the Analysis Tool. Activating a license can only be done from Reformer
Pro, and not vice-versa.

1.3 Getting Started with the Analysis Tool

You can open the Analysis Tool directly from inside Reformer Pro.

Click on the Analysis Tool icon to open the Analysis Tool. This will open the tool as a standalone application,
outside of your DAW. The icon can be found on the Library Selection bar in the plugin UI.

button (if on Windows) or on the Red button in the title bar (on OS X).

You can also open the Analysis Tool from a specific location on your machine. It will have been placed there
when you installed Reformer Pro. You can find it in the following location:

OS X: /Applications/Krotos/Reformer Pro
Windows: C:\Program Files\Krotos\Reformer Pro

Once you have located the Analysis Tool, simply double-click it to open.

KROTOS LIMITED IS INCORPORATED AND REGISTERED IN SCOTLAND WITH COMPANY NUMBER SC458616
WHOSE REGISTERED OFFICE IS AT CITYPOINT · 65 HAYMARKET TERRACE · EDINBURGH · EH12 5HD. · UK
1.4 Creating Your Own Libraries
Creating libraries for Reformer Pro is a simple
process. Simply, drag and drop a folder of audio
Choose
Folder a folder manually.

NB: Only folders of audio files are supported in

the current version, not individual loose files.

The path to the uploaded folder will be displayed in the UI, for reference.

Select the sample rates at which you want to analyse the library. Reformer
Pro requires you to analyse your library at every sample rate you are

to run. These are created by the Analysis Tool. For example, if you only
intend to work at 48khz, simply select this option.

Next, choose your thumbnail option.

option when creating a library, the default thumbnail will be selected.

Your library will appear like this in Reformer Pro:

Custom
section area. A popup will appear giving you the choice to add a thumbnail of your choice.

You can add your own thumbnail, but the image must be 56x56 pixels to display correctly in Reformer
Pro.

Your library will now be ready to analyse. Create

You will now be prompted to choose a name for your

library. Pick something you are happy to have displayed
in Reformer Pro, preferably something related to your

names will need to be fairly short as they may

edge of the Reformer Pro UI if too long.

bar increasing as the analysis progresses. Depending on

the size of your folder of audio files, this may take some
time.

KROTOS LIMITED IS INCORPORATED AND REGISTERED IN SCOTLAND WITH COMPANY NUMBER SC458616
WHOSE REGISTERED OFFICE IS AT CITYPOINT · 65 HAYMARKET TERRACE · EDINBURGH · EH12 5HD. · UK
 When the analysis is complete, you see this screen. Press

library.

To view your new library in Reformer Pro, you may need to close and open the plugin window to refresh
the library list.

1.5 Guidelines for Creating Libraries

Experimentation is key to finding the best sound and response from your material. However, to get the best
results from your libraries, we recommend you follow these general guidelines.

• Normalize your files

artificial feel from the content when used in Reformer Pro (unless this ). You
can also add gain to libraries from within Reformer Pro (per voice) to compensate for any level
discrepancies.
• Variety Libraries are most successful when they include a range of takes or gestures, with a large
dynamic range. The most important consideration is the variety included in the set of audio files. 10
lengthy, varied files with usable audio regions of different length can be more effective than better
than 50 very short files, or a collection of transients-only material.
• Recordings should all be from the same perspective (a variety of recordings from differing distances
do not work effectively).
• Recordings should be close- if possible.
• The sample rate of your content should be as high as possible, preferably 96khz or 192khz. This allows
you more possibilities when changing playback speed in real-time from within Reformer Pro (as the
high-frequency content will be maintained when pitching down, as long as you are currently working
at a high sample rate in your DAW). Reformer Pro will dynamically re-sample on the fly, so if you are
working at 48khz, and your content is at a higher sample-rate, it will sound as intended when played
back at the default playback speed per voice.
• You cannot use a folder of audio files larger than 1GB in this version. Using multiple versions of
libraries this size will also have a serious impact on your memory and CPU.
• There is no limit on the number of files that can be used in a library. Depending on the type of
material and the content of the files, some Reformer libraries are only 50MB, so are 500MB. A successful
library relies on the content, rather than file size or quantity.
• Each audio file should contain a minimum of 1 second of useable material (not including silence at
the end of a file). Anything under this duration will be automatically ignored by the system, and you
will be greeted with a popup from the Analysis Tool.
• micro libraries
folders. If you have recordings of one type of object, device or animal, make these available as
individual, labelled folders. For example, our Electro Mechanical Reformer Library, from Soundbits, was
originally one large folder containing a large range of recordings of various devices. We then broke this
down into smaller sections, per device, which were turned into individual Reformer libraries. We have
We find that this
approach allows you more precise control over the layers of your sound design.

KROTOS LIMITED IS INCORPORATED AND REGISTERED IN SCOTLAND WITH COMPANY NUMBER SC458616
WHOSE REGISTERED OFFICE IS AT CITYPOINT · 65 HAYMARKET TERRACE · EDINBURGH · EH12 5HD. · UK
 •
summed if you include stereo files). If using M/S (mid-side) recordings, please only provide the mono
channel for maximum effect
• If using material with clear, sharp transients, these often work better as edited together, with multiple
transients into one file, following one another once the decay such faded out, rather than one
hit/transient sound per file
• Formats - Audio files can be either WAV, AIF, or OGG, at 16/24-bit. MP3 is not supported
• Output Location - Analysed libraries will be placed in the following location:
o On OS X: /Library/Application Support/Krotos/Reformer/Library/Reformer Libraries
o On Windows: C:\ProgramData\Krotos\Reformer\Reformer Sample Libraries
o NB - This location cannot be changed in this version, and will cause major issues with the
behaviour of Reformer Pro if changed. We do not recommend you make any changes to these
files or folders.
• To minimise disk space, only analyse libraries at the sample rates you are likely to work at. A library
needs to be analysed for every sample rate you will work at in your DAW (48khz, 96khz, etc). For
example, if you know you are not likely to work at 176.4khz, you do not need at analyse for this sample
rate. If you find you are missing a sample rate for a library, you can simply run the Analysis Tool again to
create it. These files are proportional to the size of your folder of samples. A larger folder of samples
creates a larger set of preference files, and this increases in size with sample rate (i.e. a library only
analysed at 44.1khz will have a lower footprint than one at 192khz)
o If you are not concerned about disk space, feel free to analyse at all sample rates to prevent any
issues down the line.

1.6 Using Your Libraries in Reformer Pro

Pro UI in your DAW, and open it again (you do not need to remove the plugin from your track, only re-open the
UI). Your new libraries should now appear in the library list.

1.7 Sharing Libraries

Reformer Analysis Tool is an open platform. You can share these licenses between friends, colleagues and
the Reformer Pro community. As long you as you have a valid Reformer Pro license, you can use libraries
created by other users.

NB: You will need to share both the preference files created by the Analysis Tool and the audio files used to
create it to share the library with another Reformer Pro user.

You will need the rights to share/re-distribute the audio files used to create a library to share it with
other users as well as full user privileges to some areas of your hard drive.

You will first need to locate the preferences files on your hard drive. By Default, all Libraries created with the
Analysis Tool are placed in the following locations:

On OS X: /Library/Application Support/Krotos/Reformer/Reformer Sample Libraries/

On Windows: C:\ProgramData\ \Krotos\Reformer\Reformer Sample Libraries

These files are hidden by default on windows, and you may need to change your settings to view them.

KROTOS LIMITED IS INCORPORATED AND REGISTERED IN SCOTLAND WITH COMPANY NUMBER SC458616
WHOSE REGISTERED OFFICE IS AT CITYPOINT · 65 HAYMARKET TERRACE · EDINBURGH · EH12 5HD. · UK
 ry we created. On OS

used to create your Whoosh library.

Compress this folder (e.g. .zip) and share it.

The receiver

On OS X: /Applications/Krotos/Reformer/Reformer Sample Libraries/

On Windows: C:\Program Files\Krotos\Reformer\Reformer Sample Libraries

They will also need to copy the audio files, and place them somewhere appropriate. Bear in mind that this
location is likely to be different to the location on your machine, where the library was created.

they select the library, they will need to re-link to the audio files used in the library. This location will be saved
for future use.

KROTOS LIMITED IS INCORPORATED AND REGISTERED IN SCOTLAND WITH COMPANY NUMBER SC458616
WHOSE REGISTERED OFFICE IS AT CITYPOINT · 65 HAYMARKET TERRACE · EDINBURGH · EH12 5HD. · UK