Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    6EP19612BA00 Datasheet en

    Uploaded by

    deivis freitez
    modulo de diagnostico siemens

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6EP19612BA00 Datasheet en

    Uploaded by

    deivis freitez
    2 views3 pages
    modulo de diagnostico siemens

    Original Title

    6EP19612BA00_datasheet_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    modulo de diagnostico siemens

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views3 pages

    6EP19612BA00 Datasheet en

    Uploaded by

    deivis freitez
    modulo de diagnostico siemens

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Data sheet 6EP1961-2BA00

    SITOP SELECT DIAGNOSIS MODULE


    SITOP select Diagnostics module 4-channel input: 24 V DC/40 A
    output: 24 V DC/4x 10 A Level adjustable 2-10 A

    Input
    Type of the power supply network Controlled DC voltage (SITOP select is not designed for operation
    with DC UPS module 40 A (6EP1 931-2FC21/-2FC42)
    Supply voltage / at DC / Rated value 24 V
    Input voltage / at DC 22 ... 30 V
    Overvoltage overload capability 35 V; 100 ms
    Input current / at rated input voltage 24 V / Rated 40 A
    value

    Output
    Voltage curve / at output controlled DC voltage
    Formula for output voltage Vin - approx. 0.3 V
    Relative overall tolerance / of the voltage / Note In accordance with the supplying input voltage
    Number of outputs 4
    Output current / up to 60 °C / per output / rated value 10 A
    adjustable pick-up value current / of the current- 2 ... 10 A
    dependent overload release
    Type of response value setting via potentiometer
    Product feature
    ● parallel switching of outputs No

    6EP1961-2BA00 Subject to change without notice


    Page 1/3 08/14/2020 © Copyright Siemens
    ● bridging of equipments Yes
    Type of outputs connection Simultaneous connection of all outputs after power up of the
    supply voltage, delay time of 24 ms or 100 ms programmable for
    sequential connection

    Efficiency
    Efficiency in percent 97 %
    Power loss [W] / at rated output current / for rated 30 W
    value of the output current / typical

    Switch-off characteristic per output


    Switching characteristic
    ● of the excess current Iout = 1.0 ...1.3 x set value, switch-off after approx. 5 s
    ● of the current limitation Iout = 1.3 x set value, switch-off after approx. 50 ... 100 ms
    ● of the immediate switch-off Iout > set value and Vin < 20 V, switch-off after approx. 0.5 ms
    Residual current at switch-off / typical 20 mA
    Design of the reset device/resetting mechanism Using keys on the module
    Remote reset function -

    Protection and monitoring


    Fuse protection type / at input Blade-type fuse per output (equipped when delivered with 15 A
    fuse)
    Display version / for normal operation Two-color LED per output: green LED for "Output switched
    through"; red LED for "Output switched off due to overcurrent"
    Design of the switching contact / for signaling Common signal contact (NO contact, rating 0.5 A/24 V DC)
    function

    Safety
    Galvanic isolation / between input and output at No
    switch-off
    Standard / for safety according to EN 60950-1 and EN 50178
    operating resource protection class Class III
    Protection class IP IP20

    Approvals
    Certificate of suitability
    ● CE marking Yes
    ● UL approval Yes; UL-Recognized (UL 2367) File E328600; cULus-Listed (UL
    508, CSA C22.2 No. 107.1) File E197259; cURus (UL 60950,
    CSA C22.2 No. 60950) File E151273
    ● ATEX Yes; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus Class I, Div.
    2, Group ABCD, T4
    Standard / for explosion protection ATEX (EN 60079-0, -15); cCSAus (CSA E60079-0, -15; UL
    60079-0, -15; UL 1604)
    Certificate of suitability
    ● Shipbuilding approval No

    EMC

    6EP1961-2BA00 Subject to change without notice


    Page 2/3 08/14/2020 © Copyright Siemens
    Standard
    ● for emitted interference EN 55022 Class B
    ● for interference immunity EN 61000-6-2

    environmental conditions
    Ambient temperature
    ● during operation 0 ... 60 °C; with natural convection
    ● during transport -40 ... +85 °C
    ● during storage -40 ... +85 °C
    Environmental category / acc. to IEC 60721 Climate class 3K3, 5 … 95% no condensation

    Mechanics
    Type of electrical connection screw-type terminals
    ● at input +24 V: 2 screw terminals for 0.5 ... 16 mm²; 0 V: 2 screw terminals
    for 0.5 ... 4 mm²
    ● at output Output 1 ... 4: 1 screw terminal each for 0.22 ... 4 mm²
    ● for signaling contact 2 screw terminals for 0.22 ... 4 mm²
    ● for auxiliary contacts -
    Width / of the enclosure 72 mm
    Height / of the enclosure 90 mm
    Depth / of the enclosure 90 mm
    Installation width 72 mm
    Mounting height 190 mm
    Required spacing
    ● top 50 mm
    ● bottom 50 mm
    ● left 0 mm
    ● right 0 mm
    Net weight 0.4 kg
    Mounting type Snaps onto DIN rail EN 60715 35x7.5/15
    Product component / belonging to 4x blade-type fuse 15 A
    MTBF / at 40 °C 616 675 h
    Other information Specifications at rated input voltage and ambient temperature +25
    °C (unless otherwise specified)

    6EP1961-2BA00 Subject to change without notice


    Page 3/3 08/14/2020 © Copyright Siemens

    You might also like