103 Engg. Regement

Bid Number/बोली मांक ( बड सं या) :
GEM/2024/B/5127998
Dated/ दनांक : 04-07-2024
Bid Document/ बड द तावेज़
Bid Details/ बड ववरण
Bid End Date/Time/ बड बंद होने क तार ख/समय 25-07-2024 21:00:00
Bid Opening Date/Time/ बड खुलने क

25-07-2024 21:30:00
तार ख/समय
Bid Offer Validity (From End Date)/ बड पेशकश

30 (Days)
वैधता (बंद होने क तार ख से)
Ministry/State Name/मं ालय/रा य का नाम Ministry Of Defence
Department Name/ वभाग का नाम Department Of Military Affairs
Organisation Name/संगठन का नाम Indian Army
Office Name/कायालय का नाम ***********
Total Quantity/कुल मा ा 2452
1 / 37
Tubelight LED with complete fitting 18 oblique 20Watt , PVC

insulated single core unsheathed industrial Multistrand
cables 1 sq mm , PVC insulated single core unsheathed
industrial Multistrand cables 1.5 sq mm , PVC insulated
single core unsheathed industrial Multistrand cables 2.5 sq
mm , PVC Insulated electric cable with standard aluminium
conductor 1100V Grade , PVC Flexible wire copper
conductor , Switch piano type 5 oblique 6 Amp , Switch
piano type 15 oblique 16 Amp , Switch socket combination 5
oblique 6 AMP 3 Pin with Gang box , Switch socket
combination 5 oblique 6 AMP 3 Pin without Gang box ,
Switch socket combination 15 oblique 16 AMP 3 Pin with
Gang Box , Switch socket combination 15 oblique 16 AMP 3
Pin without Gang Box , Socket 5 oblique 6 AMP 5 Pin ,
Socket 15 oblique 16 AMP 5 Pin , MCB 16 A SP 240 volt ,
MCB 20 A SP 240 volt , Insulation tape 19mm width 25m
long , LED Bulb 5 W , LED Bulb 9 W , LED Bulb 15 W , Step
Fan Regulator , Exhaust fan 300mm sweep ISI marked with
heavy speed motor and louvers , Ceiling Fan 1200 mm
sweep with 5 step fan regulator one modular , Change over
switch 32 Amp SP , Pendent Holder , Angle holder ,
Capacitor 2.5 mfd for ceiling fans , Bed Switch 5 oblique 6
Item Category/मद केटे गर
Amp , Pozzolana Portland Cement PPC 43 grade in 50 Kg
bags , Non skid ceramic tile of size 300mm x 300mm x
7mm thick , Vitrified coloured tile of size 600mm x 600mm
x 10 mm thick , PPGI Roofing Sheet 12 feet x 4 feet of
0.5mm thick , PPGI Roofing Sheet 10 feet x 4 feet of 0.5mm
thick , Paint Red Oxide , Thinner 1ltr as per approved
sample , Paint Brush 2 inch , Paint Brush 3 inch , Synthatic
Enamel Paint OG , Synthatic Enamel Paint White , Synthatic
Enamel Paint Black , Synthatic Enamel Paint Red , Plywood
8 feet x 4 feet x 12mm , Plywood 6 feet x 3 feet x 12mm ,
CGI Sheet 12 feet x 3 feet x 0.50mm , CGI Sheet 10 feet x 3
feet x 0.50mm , Nails various sizes , Binding wire 20 guage ,
Plastic Tarpaulin HDPE 15 feet x 18 feet Green , Plastic
Tarpaulin HDPE 30 feet x 30 feet Green , Wash Hand Basin
with CP waste coupling and waste pipe along with MS
Bracket suitable for fixing of WHB , PVC Waste pipe for
Wash Hand Basin as per approved sample , M seal superior
quality 100gms Pkt , PVC Bib cock 15mm dia , CP Brass Bib
Cock 15mm dia , Plastic water tank for storage of drinking
water manufactured under rotationally moulded process
using FDA approved grade of High Density Polyethylene
Enamel
BOQ Title/बीओ यू शीषक MTA NO 06
Minimum Average Annual Turnover of the

bidder (For 3 Years)/ बडर का यूनतम औसत 9 Lakh (s)
वा षक टनओवर (3 वष का)
OEM Average Turnover (Last 3 Years)/मूल

9 Lakh (s)
उपकरण िनमाता का औसत टनओवर (गत 3 वष का)
Years of Past Experience Required for

same/similar service/उ ह ं/समान सेवाओं के िलए 3 Year (s)
अपे त वगत अनुभव के वष
MSE Exemption for Years Of

Yes
Experience/अनुभव के वष से एमएसई छूट/
2 / 37
Startup Exemption for Years of Experience

No
and Turnover/ अनुभव के वष से टाटअप छूट
Experience Criteria,Past Performance,Bidder

Turnover,Certificate (Requested in ATC),OEM Authorization
Certificate,OEM Annual Turnover,Additional Doc 1
Document required from seller/ व े ता से मांगे (Requested in ATC),Compliance of BoQ specification and
supporting document
गए द तावेज़ *In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer
Past Performance/ वगत दशन 70 %
Bid to RA enabled/ बड से रवस नीलामी स य कया No
Type of Bid/ बड का कार Two Packet Bid
PVC insulated single core unsheathed industrial Multistrand

Primary product category
cables 1 sq mm
Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 2 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय
Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)
Estimated Bid Value/अनुमािनत बड मू य 1999000
Evaluation Method/मू यांकन प ित Total value wise evaluation
Financial Document Required/ व ीय द तावेज

Yes
क आव यकता है ।
EMD Detail/ईएमड ववरण
Required/आव यकता No
ePBG Detail/ईपीबीजी ववरण
Advisory Bank/एडवाइजर बक State Bank of India
ePBG Percentage(%)/ईपीबीजी ितशत (%) 3.00
Duration of ePBG required (Months)/ईपीबीजी क

12
अपे त अविध (मह ने).
(a). EMD & Performance security should be in favour of Beneﬁciary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।
3 / 37
Beneficiary/लाभाथ :
COMMANDING OFFICER
103 ENGR REGT PIN 914103 C/O 99 APO
(Col Mukul Tewari)
Splitting/ वभाजन
Bid splitting not applied/बोली वभाजन लागू नह ं कया गया.
Reserved for Make In India products
Reserved for Make In India products Yes
MSE Purchase Preference/एमएसई खर द वर यता
MSE Purchase Preference/एमएसई खर द वर यता Yes
1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
3. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU for number of Financial years as indicated above in the bid document
before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having
supplied some quantity during each of the Financial year. In case of bunch bids, the category of primary product
having highest value should meet this criterion.
4. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
5. Bid reserved for Make In India products: : Procurement under this bid is reserved for purchase from Class 1
local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time
to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products.
However, eligible micro and small enterprises will be allowed to participate. The minimum local content to
qualify as a class 1 local supplier is denoted in the bid document. All bidders must upload a certificate from the
OEM regarding the percentage of the local content and the details of locations at which the local value addition is
made along with their bid, failing which the bid is liable to be rejected. In case the bid value is more than Rs 10
Crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost
auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other
than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020 . In
case Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will get
precedence over this clause.
6. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are
validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small
4 / 37
Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and
its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the
Purchase preference, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers
offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in
this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide
eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is
not an MSE and MSE Seller (s) has / have quoted price within L-1+ 15% (Selected by Buyer) of margin of
purchase preference /price band defined in relevant policy, such MSE Seller shall be given opportunity to match
L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are
advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for
compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012
and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is
validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents
submitted.
7. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
8. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 70% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU. Copies of relevant contracts (proving supply of
cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity
supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having
highest bid value should meet this criterion.
Tubelight LED With Complete Fitting 18 Oblique 20Watt

(Minimum 50% Local Content required for qualifying as Class 1 Local Supplier)
Technical Specifications/तकनीक विश याँ
Specification Document View File
BOQ Detail Document View File
Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
1 *********** ***********Tinsukia 113 30
5 / 37
PVC Insulated Single Core Unsheathed Industrial Multistrand Cables 1 Sq Mm
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 11 30
PVC Insulated Single Core Unsheathed Industrial Multistrand Cables 1.5 Sq Mm

6 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 11 30
PVC Insulated Single Core Unsheathed Industrial Multistrand Cables 2.5 Sq Mm

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 10 30
PVC Insulated Electric Cable With Standard Aluminium Conductor 1100V Grade
7 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 5 30
PVC Flexible Wire Copper Conductor

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 20 30
Switch Piano Type 5 Oblique 6 Amp

8 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 53 30
Switch Piano Type 15 Oblique 16 Amp

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 52 30
Switch Socket Combination 5 Oblique 6 AMP 3 Pin With Gang Box

9 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 52 30
Switch Socket Combination 5 Oblique 6 AMP 3 Pin Without Gang Box

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 52 30
Switch Socket Combination 15 Oblique 16 AMP 3 Pin With Gang Box

10 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 52 30
Switch Socket Combination 15 Oblique 16 AMP 3 Pin Without Gang Box

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 52 30
Socket 5 Oblique 6 AMP 5 Pin
11 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 33 30
Socket 15 Oblique 16 AMP 5 Pin

12 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 32 30
MCB 16 A SP 240 Volt

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 20 30
MCB 20 A SP 240 Volt

13 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 20 30
Insulation Tape 19mm Width 25m Long

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 45 30
LED Bulb 5 W
14 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 76 30
LED Bulb 9 W
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 76 30
LED Bulb 15 W
15 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 47 30
Step Fan Regulator

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 32 30
Exhaust Fan 300mm Sweep ISI Marked With Heavy Speed Motor And Louvers
16 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 10 30
Ceiling Fan 1200 Mm Sweep With 5 Step Fan Regulator One Modular
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 25 30
Change Over Switch 32 Amp SP
17 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 5 30
Pendent Holder
18 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 53 30
Angle Holder
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 60 30
Capacitor 2.5 Mfd For Ceiling Fans

19 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 63 30
Bed Switch 5 Oblique 6 Amp

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 52 30
Pozzolana Portland Cement PPC 43 Grade In 50 Kg Bags

20 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 105 30
Non Skid Ceramic Tile Of Size 300mm X 300mm X 7mm Thick

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 100 30
Vitrified Coloured Tile Of Size 600mm X 600mm X 10 Mm Thick

21 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 100 30
PPGI Roofing Sheet 12 Feet X 4 Feet Of 0.5mm Thick

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 51 30
PPGI Roofing Sheet 10 Feet X 4 Feet Of 0.5mm Thick

22 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 51 30
Paint Red Oxide

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 50 30
Thinner 1ltr As Per Approved Sample
23 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 20 30
Paint Brush 2 Inch

24 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 35 30
Paint Brush 3 Inch

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 35 30
Synthatic Enamel Paint OG

25 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 75 30
Synthatic Enamel Paint White

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 45 30
Synthatic Enamel Paint Black

26 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 45 30
Synthatic Enamel Paint Red

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 35 30
Plywood 8 Feet X 4 Feet X 12mm

27 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 36 30
Plywood 6 Feet X 3 Feet X 12mm

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 72 30
CGI Sheet 12 Feet X 3 Feet X 0.50mm

28 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 44 30
CGI Sheet 10 Feet X 3 Feet X 0.50mm

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 41 30
Nails Various Sizes
29 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 48 30
Binding Wire 20 Guage

30 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 34 30
Plastic Tarpaulin HDPE 15 Feet X 18 Feet Green

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 47 30
Plastic Tarpaulin HDPE 30 Feet X 30 Feet Green

31 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 51 30
Wash Hand Basin With CP Waste Coupling And Waste Pipe Along With MS Bracket
Suitable For Fixing Of WHB
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 10 30
PVC Waste Pipe For Wash Hand Basin As Per Approved Sample
32 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 30 30
M Seal Superior Quality 100gms Pkt

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 63 30
PVC Bib Cock 15mm Dia

33 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 44 30
CP Brass Bib Cock 15mm Dia

Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 46 30
Plastic Water Tank For Storage Of Drinking Water Manufactured Under Rotationally
Moulded Process Using FDA Approved Grade Of High Density Polyethylene Enamel
34 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 5 30
Plastic Water Tank For Storage Of Drinking Water Manufactured Under Rotationally
Moulded Process Using FDA Approved Grade Of High Density Polyethylene Enamel
35 / 37
Consignee
सं. दन
अिधकार
1 *********** ***********Tinsukia 2 30
Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत
1. Generic
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 50% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.
2. Buyer Added Bid Specific ATC
Buyer uploaded ATC document Click here to view the file .
Disclaimer/अ वीकरण
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-
1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.
Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
36 / 37
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.
This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।
---Thank You/ ध यवाद---
37 / 37

103 Engg. Regement

Uploaded by

Copyright:

Available Formats

103 Engg. Regement

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

103 Engg. Regement

Uploaded by

Copyright:

Available Formats

Bid Number/बोली मांक ( बड सं या) :

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 25-07-2024 21:00:00

Bid Opening Date/Time/ बड खुलने क

Bid Offer Validity (From End Date)/ बड पेशकश

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Defence

Department Name/ वभाग का नाम Department Of Military Affairs

Organisation Name/संगठन का नाम Indian Army

Office Name/कायालय का नाम ***********

Total Quantity/कुल मा ा 2452

Tubelight LED with complete fitting 18 oblique 20Watt , PVC

BOQ Title/बीओ यू शीषक MTA NO 06

Minimum Average Annual Turnover of the

OEM Average Turnover (Last 3 Years)/मूल

Years of Past Experience Required for

MSE Exemption for Years Of

Startup Exemption for Years of Experience

Experience Criteria,Past Performance,Bidder

Past Performance/ वगत दशन 70 %

Bid to RA enabled/ बड से रवस नीलामी स य कया No

Type of Bid/ बड का कार Two Packet Bid

PVC insulated single core unsheathed industrial Multistrand

Time allowed for Technical Clarifications

Inspection Required (By Empanelled

Estimated Bid Value/अनुमािनत बड मू य 1999000

Evaluation Method/मू यांकन प ित Total value wise evaluation

Financial Document Required/ व ीय द तावेज

EMD Detail/ईएमड ववरण

ePBG Detail/ईपीबीजी ववरण

Advisory Bank/एडवाइजर बक State Bank of India

ePBG Percentage(%)/ईपीबीजी ितशत (%) 3.00

Duration of ePBG required (Months)/ईपीबीजी क

Bid splitting not applied/बोली वभाजन लागू नह ं कया गया.

Reserved for Make In India products

Reserved for Make In India products Yes

MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

Tubelight LED With Complete Fitting 18 Oblique 20Watt

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

1 *********** ***********Tinsukia 113 30

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

PVC Insulated Single Core Unsheathed Industrial Multistrand Cables 1.5 Sq Mm

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

PVC Insulated Single Core Unsheathed Industrial Multistrand Cables 2.5 Sq Mm

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Technical Specifications/तकनीक विश याँ

1 * *Tinsukia 113 30