TECHNICALDATA29121A
TECHNICALDATA29121A
TECHNICALDATA29121A
.c
October, 1976 600, 1200, 2000, 2500 and 3000
Supersedes Technical Data 29-820 T WE A Continuous Amperes, sce-:ZI Systems
pages 1-4, dated October, 1975. 240, 480, 600 volts Ac
Mailed to: E, D, C/1901, 1923, 1929/PL Circuit Breakers
ls
ua
SCB-11 Systems Circuit Breakers 250-3000 Amperes,
600 Volts Ac
3 Poles Only
an
Listed with Underwriter's Laboratories, Inc.
except as noted.
tM
nation Size, Amperes Amperes
Cont.
Amps
240 Volts Ac
SPCB-600 600 75,000(9 65,000(9
SPCB-1200 1200 75,000 65,000
SPCB-2000 2000 150,000 125,000
ar
SPCB-2500 2500 150,000 125,000
SPCB-3000 3000 150,000 125,000
480 Volts Ac
SPCB-600 600 40,000(9 35,000(9
SPCB-1200 1200 58,000 50,000
lP
How to Order
1. Specify quantity.
2. Give following information on breaker:
Type
Continuous Current Rating
lec
Volts
Phase, No. of Wires. Frequency
3. Select desired modifications and/or ac
cessories.
4. Ordering example: One (1) Type SPCB-
2000, 1600 amperes, 240 volts Ac, 3
phase, 4 wire, 60 Hz fixed mounting
.E
Discount SCB-1
Current
ww
Monitor
Adjustable
Static Sensor
om
Page 2
.c
Selection Data- 250-3000 Amps, 600 Volts Ac, 3 Poles Only Optional Adjustable Static Sensor
List Prices: See Price List 29-020 P WE A Discount Symbol SCB-1 These sensors are optional, at the price ad
dition shown in 29-020 P WE A, in place
Fixed Mounting Breakers, Standard Rear Connected@
of the one included with the breaker. Prices
List Price Includes: Breaker frame with trip unit and flux transfer shunt trip®; current
shown list style number and description of
ls
monitors; static sensor with adjustable long time delay and instantaneous pick-up, push-to
sensor required. Sensor units with cir
trip button, rear bus connectors.
cuitry providing indication of tripping due
Breaker Mounting Operation Continuous Current Rating,
to Ground Fault or Instantaneous, require
Type Amperes
120/60 control power, a 120 volt indicating
ua
@SPCB-600 Fixed® Manual 250,400 and 600 light, and a single pole switch to reset the
@SPCB-1200 F ixed® Manual 250,400,600, 800,1000 and 1200 circuit. Light and switch must be ordered
@SPCB-2000 Fixed Manual 600, 800,1000, 1200,1600 and 2000 separately, or supplied by user. See below.
@SPCB-2500 Fixed Manual 2500
@SPCB-3000 Fixed Manual 3000
Indicator Light and Reset Button Kits®
Ground Trip Indicator Kit
an
Fixed Mounting Breakers With Front Removable Mounting Frame@
Style No. 766 A374G03
List Price Includes: Breaker frame with trip unit and flux transfer shunt trip®; current Instantaneous Trip Indicator Kit
monitors; static sensor with adjustable long time delay and instantaneous pick-up, push-to Style No. 766 A374G04
trip button, and front removable mounting frame. Stationary portion of mounting frame
(?) Not listed with Underwriters Laboratories. Inc.
may be ordered separately.
@ � 000,2500 and 3000 amp. frames must be used
I
Breaker Mounting Operation Continuous Current Rating,
tM
1n a ventilated enclosure.
Type Amperes
@) For use with special sensors listed below with
Ground Trip or Instantaneous Trip Indicator
@SPCB-2000 Fixed Front Removable Manual 600, 800, 1000,1200,1600, 2000 ctrcuitry.
@SPCB-2500 Fixed Front Removable Manual 2500
@SPCB-3000 Fixed Front Removable Manual 3000
@ U/L listed for application at 100% of rating.
@ When ordering breaker with movable portion only
for use with previously installed stationary portion
Drawout Mounting Breakers@
ar
deduct the list price of stationary portion from
List Price Includes: Breaker frame with trip unit and flux transfer shunt trip®; current complete breaker with mounting frame or draw
out frame list price.
monitors; static sensor with adjustable long time delay and instantaneous pick-up; push-to
(j) Secondary contacts when required for motor
trip button, complete drawout frame. Shipped as two items, movable and stationary parts.
operator or other attachment must be specified
Breaker frame, static sensor and current monitor attached and wired up to movable portion. and factory mounted on stationary mounting
lP
Secondary contacts supplied as required at no extra charge. Stationary portion may be frame when it is ordered separately.
ordered separately. @ On 2000. 2500. 3000 amp units the sensor and
monitors are mounted inside the breaker frame.
Breaker Mounting Operation Continuous Current Rating,
Type Amperes ® The standard fixed mounted 600 and 1200 am
pere units have the frame, sensor. monitors and
ca
I
For Stationary Portion of Front Stationary Portion of
Breaker Removable Mounting Frame Only@ Drawout Frame Only@(j)
@SPCB-600 Available
lec
@SPCB-1200 Available
@SPCB-2000 Available Available
@SPCB-2500 Available Available
@SPCB-3000 Available Available
Page 3
.c
Modifications Auxiliary Accessories ( Supplied separately)
List Prices: See Price List 29-020 P WE A Contacts@ Handle Extension®
Discount Symbol: SCB-1 Breaker Style Number
Modifications are available as listed below. SPCB-1200 1251 C65G01
ls
Only one modification marked @ can be SPCB-2000, 2500, 3000 315C882G01
installed.
Handle Locks®
Racking Crank For SP CB-600, 1200
A special crank to engage or withdraw the
ua
Non-Padlockable
moving portion of the drawout; however, a
Fits over breaker handle
standard % inch hex socket with extension 2 Contacts {1 "A", 1 "B") SPOT Switch
and is removable.
can be used for this purpose. Availability: SP CB-600, 1200, 2000, Style Number 1720 101
Style No. 765A767G01 2500 and 3000
an
( Specify voltage Availability: SP CB-600, 1200, 2000, ( Meets requirements
and frequency) 2500 and 3000 of California Code;
sold only in lots of 1 0)
Key Interlock® Style Number 3738591G02
Mounted on
breaker, cannot
tM
be used with
motor operator.
Availability: SP CB-600, 1200, 2000,
Base Mounting Hardware for Stand
2500 and 3000.
ard Fixed Mounting Units
Undervoltage Order separately when required. No charge
Availability: SP CB-600, 1200, 2000,
Release@ when ordered with breaker.
ar
2500 and 3000
SP CB- 600: Style Number 1614 613
SP CB-1200: Style Number 1091 716
Connectors for Fixed Mounting
SP CB-2000: Style Number 624B375G22
Rear connectors for Bus connection sup
SP CB-2500: Style Number 624B375G22
plied as standard at no charge with standard
lP
Motor Operator®
Availability: SP CB-600, 1200, 2000,
2500 and 3000
The SP CB-2000 and SP CB-2500 fixed
On- Off/reset cover-mounted pushbutton
mounting breaker can be supplied with
lec
Up to four switches can be provided. Each This test kit is designed for making func
switch provides a N O and N C contact that tional checks on static sensor circuits and
transfers before reaching the test position shunt trip. Testing can be done without
when being withdrawn, and after the test disconnecting or removing the breaker from
position when being racked in. service, with down-time limited to the time
@ Only one modifi catron marked @ c2.n be r nstclled. required to reset and reclose the breaker.
@ Not Underwriter"s Laboratories. Inc. listed.
The tester operates on 120 volts Ac, 60 Hz
@ Separate selling price: included with f rame at no
and includes complete instructions.
w
charge.
@ Not f ield mountable. Style Number: 1255 C48G02®
@ For use only on SPCB breakers manufac tured
af ter first quarter 1975 using new style senes
2607084 sensor units.
ww
om
Technical Data
29-121
Page4
.c
ls
ua
an
tM
ar
lP
ca
tri
lec
.E