Bill of Materials

TI DESIGNS
TIDA-00150
Automotive Resistive Pressure Sensor Interface

Item # Quantity Designator Comment Description Footprint P/N P/N (DIGIKEY) REMARKS P/N (NEWARK)
CAPACITORS
1 5 C1, C35, C42, C52, C53 1uF,16V,X7R 1uF,0805,16V,10%,X7R 0805 C2012X7R1C105K 445-1358-1-ND
C2, C3, C4, C5, C34, C36, C37, C39, C40, C46, C48, C68,
2 13 C69 0.1uF,16V,X7R 0.1uF,0603,16V,10%,X7R 0603 399-1096-1-ND, C0603C104K4RACTU 399-1096-1-ND, C0603C104K4RACTU
3 2 C6, C7 36pF,50V,C0G 36pF,0603,50V,5%,C0G 0603 GRM1885C1H360JA01D 490-1416-1-ND
4 1 C8 0.1uF,16V,X7R 0.1uF,0805,16V,10%,X7R 0805 C0603C104K4RACTU 399-1096-1-ND 603 VS 805 PACKAGE USE 805 package
C9, C17, C43, C45, C49, C51, C54, C60, C61, C62, C63,
5 12 C64 0.1uF,50V,X7R 0.1uF,0805,50V,10%,X7R 0805 C2012X7R1H104K 445-1349-2-ND
6 4 C10, C15, C26, C31 0.01uF, 0.01uF,50V,X7R 0.01uF,0805,50V,10%,X7R 0805 C2012X7R1H103K 445-1348-1-ND
7 1 C12 10uF,16V,Tant 10uF,1206,16V,10%,Tant 1206 B45196H3106K109 495-2236-1-ND
8 1 C14 22uF,16V,Tant 22uF,1206,16V,20%,Tant 1210 TCTAL1C226M8R 511-1502-1-ND
9 2 C18, C21 Cap Var 7-50pF, 50V Cap Var - Murata TZB4R500BA10R00 490-1983-6-ND
10 2 C19, C22 30pF 30pF,0805,100V,5%,NP0 0805 08051A300JAT2A 478-3738-1-ND
11 2 C20, C23 56pF 56pF,0805,100V,5%,C0G 0805 08051A560JAT2A 478-5023-1-ND
12 4 C24, C27, C28, C32 1nF 1nF,0805,50V,10%,X7R 0805 C2012X7R1H102K 445-1347-1-ND
13 4 C30, C33, C38, C41 2.2nF,16V,X7R 2.2nF,0603,16V,10%,X7R 0603 C0603C223K4RACTU 399-1093-1-ND 2.2NF VS 22NF USE 2.2nF
14 2 C44, C47 100pF,50V,,X7R 100pF,0805,50V,10%,X7R 0805 C2012C0G1H101J 445-1329-1-ND 5% VS 10% USE Either Tolerance
15 1 C50 100pF,250V,C0G 100pF,0603,250V,5%,C0G 0603 C1608C0G2E101J 445-2314-1-ND

16 1 CBulk1 100uF,16V, AL 100uF,16V, 20% AL CAP 6.6 X 6.6 MM SMD EEV-TG1C101P PCE3619CT-ND

JUMPERS / HEADERS
17 1 J1 Female Receptacle Assembly, 9 Position, RA/F DSUB1.385-RA/F A35109-ND 1734348-1
The Following Four Parts (Item #: 18-21) Will Be Cut from the Larger Part (A26513-40) to the Appropriate Number of Pins
JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP11, JP13,
18 19 JP14, JP15, JP16, JP18, JP22, JP23, JP28, JP29 JUMPER 2 PIN Two Pin Jumper JMP0.2 4-103185-0 A26513-40-ND
19 6 JP10, JP12, JP17, JP19, JP26, JP27 JUMPER 3 PIN Three Pin Jumper JMP0.3 4-103185-0 A26513-40-ND
20 1 H1 Header 4 Header, 4-Pin HDR1X4
21 1 H2 Header 6 Header, 6-Pin HDR1X6

22 2 P1, P3 GND, VPW R BANANA STACK (FEMALE END) BANANA-LARGE-HEX - R2D2 35F865 96B5641
23 1 P2 2 Pos Term Block 2 Pos Term Block 2 Pos Term Block 1729018 277-1236-ND
24 1 P4 Header 20X2 Header, 20-Pin, Dual row HDR2X20 4-103240-0 A26528-40-ND
25 1 P6 TIGER - A TIGER - A HDR-2x15-M TSW -115-08-T-D-RA SAM1049-15-ND

INDUCTORS, COILS, ETC.

26 4 L1, L2, L3, L4 0R 0805 MCR10EZPJ000 RHM0.0ARCT-ND

RESISTORS
27 6 R1, R2, R12, R13, R22, R23 0.0R 0.0,0603,1/10W ,5% 0603 MCR03EZPJ000 RHM0.0GCT-ND
28 1 R5 1M 1M,0603,1/10W ,5% 0603 MCR03EZPJ105 RHM1.0MGCT-ND
29 1 R6 200R 200,0805,1/8W ,1% 0805 MCR10EZPJ201 RHM200ARCT-ND
30 1 R7 1k 1k,0805,1/4,1% 0805 MCR10EZPF1001 RHM1.00KCRCT-ND
31 1 R8 47k 47k,0805,1/10W ,5% 0805 x 4 Concave (2012 metric) 743C083473JPTR 743C083473JPCT-ND
32 4 R9, R10, R19, R20 10k 10k,0805,1/8W ,5% 0805 MCR10EZPF1002 RHM10.0KCRCT-ND
33 4 R14, R15, R27, R28 RPot SM-42TX502 pot_murata SM-42TX502 SM-42TX502CT-ND
34 4 R17, R18, R29, R30 7.5k 7.5k,0805,1/8W ,5% 0805 MCR10EZHJ752, RHM7.5KACT-ND MCR10EZHJ752, RHM7.5KACT-ND
35 8 R24, R25, R31, R32, R35, R36, R40, R41 1k 1k,0603,1/10W ,1% 0603 MCR03EZPFX1001 RHM1.00KHCT-ND
R33, R34, R37, R38, R39, R42, R43, R49, R50, R51, R52,
36 19 R69, R76, R77, R78, R79, R80, R89, R91 49.9k 49.9k,0603,5%,1/10W 0603 MCR03EZPFX4992, RHM49.9KHCT-ND MCR03EZPFX4992, RHM49.9KHCT-ND
37 4 R44, R45, R47, R48 49k 49k,0805,1/8W ,5% 0805 MCR03EZPFX4992 RHM49.9KHCT-ND 49.9K^ VS 49K^ OR 603 VS 805 USE 805 49.9k
38 1 R46 200R 200,0805,1/8W ,5% 0805 MCR10EZPJ201 RHM200ARCT-ND
39 2 R53, R55 4.99k 4.99k,0603,1/10W ,1% 0603 MCR03EZPFX4991 RHM4.99KHCT-ND
40 1 R54 200R 200,0805,1/8W ,1% 0805 MCR10EZPJ201 RHM200ARCT-ND
41 1 R64 1k 1k,0603,1/10W ,5% 0603 MCR03EZPJ102 RHM1.0KGCT-ND
42 1 R66 220k 220k,0603,1/10W ,5% 0603 MCR03EZPJ224 RHM220KGCT-ND
43 1 R68 5R 5R,1206,1/3W ,5% 1206 ESR18EZPJ5R1 RHM5.1ICT-ND 5^ VS 5.1^ USE 5.1 Ohms
44 1 R70 10R 10R,0603,1/10W ,1% 0805 MCR03EZPFX10R0 RHM10.0HCT-ND 603 VS 805 USE 805
45 4 R75, R81, R87, R94 100,0805,1/10W ,5% 100,0805,1/10W ,5% - NETW ORK 0805 x 4 Concave (2012 metric) 743C083101JPTR 743C083101JPCT-ND
46 1 R88 332, 0805,1/8W ,5% 332, 0805,1/8W ,5% 0805 MCR10EZPF3320 RHM332CRCT-ND
47 2 R93, R930 510,0805,1/8W ,5% 510,0805,1/8W ,5% 0805 MCR10EZPJ511 RHM510ARCT-ND
48 1 R931 1.1k 1100,0805,1/8W ,5% 0805 MCR10EZPJ112 RHM1.1KARCT-ND

TI - SEMICONDUCTORS
The Following Parts (Item #: 49-64) Will Be Provided By Texas Instruments
QFN ICs are not available from standard inventory.
They are orderable here:
http://giant2.itg.ti.com/hval/msa/cisevm.nsf/Reques
49 1 U1 PGA400 - PSSC QFN 790-41036-101T t?OpenForm
50 1 U2 TLV1117 TLV1117CDCYR PG-SOT-223 296-17598-1-ND 296-17598-1-ND
51 1 U4 REG102-5 REG102NA-5/250 DBV (R-PDSO-G5) REG102NA-5/250 REG102NA-5CT-ND
52 3 U5, U10, U19 OPA2335UA OPA2335AIDR 182H_L OPA2335AIDR 296-14170-5-ND should be 296-13462-1-ND MPN & DIGIKEY PART NOT SAME
53 4 U6, U7, U9, U11 TS5A3359 TS5A3359DCUR MSOP8 (DCU) TS5A3359DCUR 296-21193-1-ND
54 1 U8 DAC8574 DAC8574IPW PW (R-PDSO-G)-16 DAC8574IPW 296-14170-5-ND
55 2 U12, U13 SN74LVC1G07 SN74LVC1G07DBVR DBV (R-PDSO-G5) SN74LVC1G07DBVR 296-8485-1-ND
56 1 U14 ADS1100A2 ADS1100A2IDBVT DBV (R-PDSO-G6) ADS1100A2IDBVT 296-12966-1-ND should be 296-14299-1-ND MPN & DIGIKEY PART NOT SAME
Item # Quantity Designator Comment Description Footprint P/N P/N (DIGIKEY) REMARKS P/N (NEWARK)
57 1 U15 TS12A44514 TS12A44514PW R PW (R-PDSO-G)-14 TS12A44514PW R 296-23621-1-ND
58 1 U16 ADS1100A3 ADS1100A3IDBVT DBV (R-PDSO-G6) ADS1100A3IDBVT 296-14298-1-ND should be 296-14300-1-ND MPN & DIGIKEY PART NOT SAME
59 2 U17, U27 TS5A23159 TS5A23159DGSR MSOP10 (DGS) TS5A23159DGSR 296-18598-1-ND
60 1 U18 ADS1100A4 ADS1100A4IDBVT DBV (R-PDSO-G6) ADS1100A4IDBVT 296-14299-1-ND should be 296-14301-1-ND MPN & DIGIKEY PART NOT SAME
61 1 U20 ADS1100A5 ADS1100A5IDBVT DBV (R-PDSO-G6) ADS1100A5IDBVT 296-14300-1-ND should be 296-14302-1-ND MPN & DIGIKEY PART NOT SAME
62 1 U23 MAX3221ECAE MAX3221IDBR SSOP16 MAX3221IDBR 296-9595-1-ND
63 1 U25 SN74LVC1G240 SN74LVC1G240DCKR DCK (R-PDSO-G5) SN74LVC1G240DCKR 296-11610-1-ND
64 1 U26 SN74CBTLV3257 SN74CBT3257CPW R PW (R-PDSO-G)-16 SN74CBT3257CPW R 296-19211-1-ND

SEMICONDUCTORS
65 1 D1 Diode Schottky DIODE SCHOTTKY 4A 40V SMB DO-214AA SSB44-E3/52T SSB44-E3/52TGICT-ND
66 4 D2, D3, D30, D31 LED2 Typical RED, GREEN, YELLOW , AMBER GaAs LED 0805 - LumexLED 67-1553-2, SML-LXT0805GW -TR 67-1553-2, SML-LXT0805GW -TR
67 1 DZ1 13V Zener 13V Zener DO-214aa SMBJ5350B-TP SMBJ5350B-TPMSCT-ND
68 1 DZ4 5.1V Zener 5.1V Zener SOT-23 BZX84C5V1-7-F BZX84C5V1-FDICT-ND
69 1 Q3 SI2319DS-T1-E3 SI2319DS-T1-E3 SOT-23 SI2319DS-T1-E3 SI2319DS-T1-E3CT-ND
70 1 Q4 2N2222 NPN General Purpose Amplifier SOT-23 SMBT2222AE6327 SMBT2222AINCT-ND
71 1 X1 ECS-400-20-30B-DU ECS-400-20-30B-DU Crystal 4 ECS-400-20-30B-DU XC1520CT-ND

TESTPOINTS AND SWITCHES

72 3 T1, T6,
T5, T2, T100,
T3 T101, T102, TP5, TP6, TP7, TP8, TP9, TP10, +5V, CPU_RX,
/CS, +7.5V, VPW R
CPU_TX, GPIO1, GPIO2, GPIO3, GPIO4, TEST POINT 0.052 151-107-RC 151-107-RC
73 29 TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, GPIO5, GPIO6, ICAP1, ICAP2, MISO, MOSI, OW I, RX, TEST POINT 0.042 151-201-RC 151-201-RC
74
75 5 TP1, TP2, TP3, TP4, TP200 +2.5V, AVDD, DVDD, VDD, VP_OTP TEST POINT 0.042 151-207-RC 151-207-RC
76 1 TP29 TP31, TP32, TP33, TP34, TP35, TP36, TP37, TP38,
TP30, GND TEST POINT 0.042 151-203-RC 151-203-RC
77 15 TP39, TP40, TP41, TP42, TP44, TP45 GND TEST POINT 0.052 151-103-RC 151-103-RC

STANDOFFS and HARDWARE

78 4 SPC TECHNOLOGY - 2401 - Spacer n/a 2401 92N4906
79 4 SPC TECHNOLOGY - BG-705 - Open Grommet n/a BG-705 43F475
80 8 KEYSTONE - 09300 - Machine Screw n/a 9300 30M0258

SHUNTS
SHUNTS Will Be Installed According the Diagram in the "Hardware Assembly" Document
81 24 CONN JUMPER SHORTING GOLD FLASH N/A N/A SPC02SYAN S9001-ND

NOT INSTALLED COMPONENTS

82 2 R3, R4 0.0R 0.0,0603,1/10W ,5% 0603 MCR03EZPJ000 RHM0.0GCT-ND
83 2 C25, C29 10nF - X2Y 10nF X2Y CAPACITOR 0805_X2Y 500X14W 103MV4T 709-1008-1-ND
84 1 C59 330nF,16V,X7R 330nF,0603,16V,10%,X7R 0603 C1608X7R1C334K 445-5126-1-ND
 IMPORTANT NOTICE FOR TI REFERENCE DESIGNS
Texas Instruments Incorporated ("TI") reference designs are solely intended to assist designers (“Buyers”) who are developing systems that
incorporate TI semiconductor products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains
responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products.
TI reference designs have been created using standard laboratory conditions and engineering practices. TI has not conducted any
testing other than that specifically described in the published documentation for a particular reference design. TI may make
corrections, enhancements, improvements and other changes to its reference designs.
Buyers are authorized to use TI reference designs with the TI component(s) identified in each particular reference design and to modify the
reference design in the development of their end products. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL
OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY
OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right,
or other intellectual property right relating to any combination, machine, or process in which TI components or services are used.
Information published by TI regarding third-party products or services does not constitute a license to use such products or services, or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
TI REFERENCE DESIGNS ARE PROVIDED "AS IS". TI MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE
REFERENCE DESIGNS OR USE OF THE REFERENCE DESIGNS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR
COMPLETENESS. TI DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY
INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO TI REFERENCE DESIGNS OR USE THEREOF. TI SHALL NOT BE LIABLE
FOR AND SHALL NOT DEFEND OR INDEMNIFY BUYERS AGAINST ANY THIRD PARTY INFRINGEMENT CLAIM THAT RELATES TO
OR IS BASED ON A COMBINATION OF COMPONENTS PROVIDED IN A TI REFERENCE DESIGN. IN NO EVENT SHALL TI BE
LIABLE FOR ANY ACTUAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES, HOWEVER CAUSED, ON ANY
THEORY OF LIABILITY AND WHETHER OR NOT TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, ARISING IN
ANY WAY OUT OF TI REFERENCE DESIGNS OR BUYER’S USE OF TI REFERENCE DESIGNS.
TI reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per
JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant
information before placing orders and should verify that such information is current and complete. All semiconductor products are sold
subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques for TI components are used to the extent TI
deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not
necessarily performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
Reproduction of significant portions of TI information in TI data books, data sheets or reference designs is permissible only if reproduction is
without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for
such altered documentation. Information of third parties may be subject to additional restrictions.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that
anticipate dangerous failures, monitor failures and their consequences, lessen the likelihood of dangerous failures and take appropriate
remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in
Buyer’s safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed an agreement specifically governing such use.
Only those TI components that TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components that
have not been so designated is solely at Buyer's risk, and Buyer is solely responsible for compliance with all legal and regulatory
requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated