HERMETIC

COMPRESSOR
AW 2512ZXG
BOM ID : 73J-A0
-
PRINCIPAL DIMENSIONS - mm Electrical : 380-420 V/50 Hz., 440-460 V V/60 Hz. 3 Phase
Nominal Performance
Capacity 3,282 / 3,722 Watts
11,198 / 12,699 BTU/Hr
2,822 / 3,200 Kcal/Hr
Power Input 2,550 / 2,970 Watts
Locked Rotor Amps 40.00 / 40.00 Amps
Max Continuous Current - / - Amps
Rated Load Amps 4.60 / 4.60 Amps
COP 1.29 / 1.25 Watts / Watts
EER 4.39 / 4.28 BTU/W-Hr
Testing Conditions
A: 324 B: 223 C: 191 D: 191 E: 239 Condensing Temperature 54.40 °C 129.9 °F
Evaporating Temperature -23.30 / - °C -9.9 / - °F
SCHEMATIC WIRING DIAGRAM 3 PHASE
Liquid Temperature 32.20 °C 90.0 °F
- Return Gas Temperature 32.20 °C 90.0 °F
Ambient Temperature 32.20 °C 90.0 °F
SCHEMATIC WIRING DIAGRAM -
Application
Evaporating Temp. Range LBP @ -34.40 ° C to -12.20 ° C
(-29.9° F to 10.0° F)
Heat Pump - ° C to - ° C
(-° F to -° F)
Refrigerant R404A
Refrigerant Flow Control Capillary Tube
Compressor Cooling Fan
Compressor and Motor data
Compressor Type Reciprocating
Displacement 71.00 cc.
Oil Type Polyolester Oil
Oil Charge 1,142 cc.
Motor Type 3 PHASE ; 2 Pole 2,850 / 3,500 r/m
-
Voltage Range 323-437/391-529 Volts 50/60 Hz.
MOUNTING KIT Winding Resistance at 25 ° C
L1-L2 4.08 Ohms
L1-L3 4.08 Ohms
L2-L3 4.08 Ohms
Weight with Oil 30.50 Kg.
Weight with Oil and Accessories 30.66 Kg.
Electrical Components
Motor Protector
Type Internal Overload
Model Number 4042KGE658-4
Open / Close 120-130 / 52-70 ° C
1st Cycle trip at 25 ° C 49.00 Amps(main) - Amps(start)
Motor Starter
Type -
Model Number -
Pick Up (max.) - Volts
Drop Out (min.) - Volts
Terminal Cover KGM 901-2
Start Capacitor No µF No VAC.
Disch Resistor for Start Cap -
Run Capacitor No µF No VAC.
Mounting Kit
Rubber Grommet 4007KGM905
Sleeve Grommet 4023KGM903-2
Washer -
Since we are constantly improving our product , the REV. DATE C / N No.
specification are subject to change without notice. 18-01-13 0012/13
Certificate Marks www.alamko.by

COMPRESSOR PERFORMANCE TABLE