From Food Waste to Biogas: Energy for Small Scale Farms

An Interactive Qualifying Project Report

Submitted By:
Natalie Marquardt
Justin Marsh
Joseph Pizzuto
Alex Silk

Sponsor:
Nuestro Huerto

Advisors:
Prof. Robert Hersh
Prof. Derren Rosbach

This report represents the work of WPI undergraduate students submitted to the faculty as evidence of
completion of a degree requirement. WPI routinely publishes these reports on its website without
editorial or peer review. For more information about the projects program at WPI, please see
http://www.wpi.edu/academics/ugradstudies/project-learning.html
Abstract
Our team faced the challenge of restarting and improving the design and operation of a small
scale biodigester constructed by a WPI team the previous year for Nuestro Huerto, an urban farm in
Worcester. The overall goal was to use the food and plant waste to produce a useable energy source in
the form of methane gas and to serve as an educational example for the community. We developed
methods to produce, filter, collect, and store biogas and used the gas as a cooking fuel instead of a heat
source for the greenhouse. Our work was influenced by a human centered design framework in which
we focused our design and improvements on the needs and capacities of our sponsor to maintain and
operate the technology.

I
Acknowledgments
The completion of this project and report would not have been possible without a few

individuals who we would like to acknowledge. We would like to extend gratitude to our faculty

advisors, Professor Robert Hersh and Professor Rosbach. They helped guide us through the project as

well as draft and revise the final report for the project. In addition to our faculty advisors, we would like

to thank other WPI faculty members Professors Bergendahl and Kmiotek for providing insight on gas

testing. We would like to thank Amanda Barker of Nuestro Huerto for the opportunity to work on this

project. We all take away numerous lessons learned from the journey.

II
Executive Summary

Sustainability, is “the quality of not being harmful to the environment or depleting natural

resources, and thereby supporting long-term ecological balance” (Random House, 2015). Using

resources sustainably is especially relevant to small scale organizations that farm in cities. Urban farms

can improve what are often degraded, compacted urban soils through application of compost and

organic fertilizers created from recycling food waste; they can also use food wastes as a feedstock to

produce renewable energy (e.g., heat) through anaerobic digestion. This renewable energy source can

help urban farmer’s heat greenhouses and extend the growing season to maximize crop yields.

Nuestro Huerto, an urban farm located in Worcester, MA, hopes to use the food and plant

waste that it generates to produce a useable energy source in the form of methane gas and to serve as

an educational example for the community. Last year, another WPI team was able to construct a

biodigester to begin and establish a mesophilic bacteria culture meant to function at a temperature of

about 90-100 degrees Fahrenheit without the presence of oxygen. The process of anaerobic digestion

consists of bacteria breaking down organic material and producing biogas containing methane, carbon

dioxide and trace amounts of other gasses. Because the bacteria are living biological organisms, they

require certain conditions to live, such as maintaining a constant temperature, pH level, and a constant

supply of food. These conditions can be difficult to maintain, especially in the cold climate of Worcester.

Despite the team’s efforts to create a functional small scale biodigester, the prototype built last year did

not reliably produce biogas. Procedures for feeding and managing the biodigester, and for capturing

biogas were not firmly established, nor were suitable educational documents about operating and

troubleshooting the biodigester developed. Our task was to develop a system that provides a

productive and maintainable feeding schedule, establish a means to filter and store the biogas, and

institute a plan to apply the final methane gas product as an energy source to benefit Nuestro Huerto.

III
These goals were organized into a design challenge: How can we further develop the biodigester’s

operation in order to produce a viable product all the while keeping the needs, hopes, and aspirations of

Nuestro Huerto in mind?

With a solid design challenge as our focus, we developed four objectives to guide our project.

The first was to gain a better understanding of the needs and capacity of our sponsor to operate and

manage the biodigester. In order to do this, the team

utilized a Human Centered Design Toolkit which gave ideas

on how to design using three criteria: desirability, feasibility

and viability. These criteria, discussed with the sponsor,

guided our design ideas and improvements. We then

focused on the next objective which was to determine the

drawbacks of the existing design and identify improvement

to make the biodigester more efficient and easier to

operate. After the initial assessment of the biodigester’s functionality, we were able to quickly identify

the most pressing issues of the existing biodigester design. First and foremost, the bacteria culture

residing in the biodigester had become dormant due to lack of feeding. To produce biogas, we quickly

developed techniques to feed the biodigester that were specific to the Phase 1 design. By doing this, the

bacteria culture was restarted and biogas began to be produced at a slowly increasing rate.

The initial feeding process was one of trial and error. The Phase 1 design proved to be very

inefficient as it led to spills during feeding and because of the difficulty of feeding, increased the amount

of time needed to feed. In order to solve this, the team decided that improvements to the roof and

physical structure of the biodigester had to be made. The new roof was designed to make it easier to

IV
feed the biodigester and to improve the heat retention of the

biodigester box. After multiple revisions, for the final design, we decided

on an angled roof with a chimney-style feeding tube protruding through

the roof.

With a bacteria colony established within the biodigester, the

team had to make sure to maintain an environment conducive to biogas

production. The mesophilic bacteria, as noted above, rely on a

temperature range of 90-100 Fahrenheit. To maintain this temperature

we used a heating mat wired to a thermostat. We monitor the system

through a thermometer that was purchased for its ability to record temperatures. The thermometer

readings were used to calibrate the thermostat in order to reduce energy required by the heating mat.

The first graph below is from the beginning of the project when temperatures varied widely. The graph

shows temperature recordings from the thermometer that was inside the biodigester from Thursday,

November 20th, to Monday, December 1st. The temperature varied over a large range of temperatures.

This was because we did not know how to properly set the thermostat to get the desired temperature.

These recordings were significant because it allowed us to predict if the bacteria colonies were still alive

and producing gas. The second graph show temperature values from April 12th to 13th when the

temperatures had become steadier. At this time, the temperature was in the desired range for

mesophilic bacteria to produce gas and was remaining relatively constant.

V
 In addition to calibrating the thermostat and heating mat, the team investigated ways to

improve heat retention of the biodigester box. This was done by implementing a new roof design as well

as by sealing holes from the existing design that were deemed unnecessary. By sealing the holes, the

team not only improved the system’s heat retention, but also eliminated possible oxygen leaks into the

VI
system. This was important because allowing oxygen into the system could kill off any bacteria that

were producing gas. This also stopped any biogas from being released into the atmosphere.

Our third and primary objective was to establish a sustainable system

that uses food waste to produce biogas and a process to filter and collect the

gas. This system is sustainable in that it can be easily managed and uses

readily available food waste as source of renewable energy. We developed a

filtration process to remove hydrogen sulfide and carbon dioxide from the

biogas. The removal of hydrogen sulfide is critical to ensure storage vessels,

potential gas lines, and

burners do not erode from the corrosive

properties of the gas. To do so, the team utilized

the chemical reaction that happens between

hydrogen sulfide and iron present in steel wool.

Steel wool was placed inside of a PVC container. The PVC scrubber was then attached to the gas pipe

leading out of the biodigester vessel in a location that assured gas would flow through the scrubber

before entering any sort of collection bag.

The scrubber to remove carbon dioxide was developed as a

possible addition to the biodigester and became a recommendation for

future use of the biodigester. In order to separate CO2 from methane, the

biogas is passed through water. The water absorbs a percentage of the

CO2 and has to be changed once it becomes saturated with CO2. Based on

potential gas production calculations and CO2 saturation data, it was

estimated that a CO2 scrubber that held 10 gallons of water, would need

to be replaced every 3 feeds. Because of the work required to change the water, and the amount of

VII
water that would have been needed to use, the scrubber was not used on the final design. A

consequence of not having a scrubber is that between 30 and 40% of the collected gas will be CO2 and

not methane. This means that between 30-40% of the space in a collection vessel will be wasted on gas

that cannot be combusted. Pictured below is the full schematic, with the CO2 scrubber left in, in case it is

decided to be used in the future.

A byproduct of the anaerobic digestion process is unused biomaterial called effluent. This

effluent can be utilized as a very effective fertilizer for various crops and plant life as well as a good

indicator of the health of the bacteria culture. The biodigester had a pipe built into it that would release

the built up effluent once it reached a certain level in the tank. The effluent needs to be drained or else

the tank will fill up and overflow causing possible over pressurization. It is important to keep track of the

effluent level so that the health of the biodigester is known. Besides testing the chemical properties

such as pH, the effectiveness of digestion can also be assessed by analyzing the contents of the effluent.

VIII
For example a clear, odorless, liquid would indicate a healthy digestion process. It took a while for the

biodigester vessel to reach the correct level of slurry in order to remove effluent, but once it did the

team was able to remove about 5 gallons. This collected effluent was not as clear as expected but this

was assumed to be because it was the first sample collected. Despite this, the pH level of the collected

effluent was tested and found to be within the correct range

With warmer weather came an increase in biogas production. There were many factors that led

to the increase in production. One suspected main factor was tightening the gas outlet and effluent

pipes. These pipes were inaccessible until the construction and installation of the new roof revealed

them. Another factor of the increase in gas production is an increase in

regular feedings. During the winter months, access to feed and the

biodigester became limited and the feedings decreased. When it became

easier to travel to the biodigester and a regular feeding schedule was made,

the gas production increased. An average feed consisted of nine to ten

pounds of solid food and up to twenty pounds of water. Based on our

calculations, we should have produced 24 gallons of biogas per feed. In our

actual collections, the amount was around 10 gallons. This lack of production

could have been caused by collecting the gas before the feed was fully digested or by not being able to

collect all of the produced gas at once because of low pressures not forcing all of the gas out. A third

factor in the biogas production was a constant temperature. Once the thermostat and heating mat and

been fully calibrated, the internal temperature of the biodigester stopped fluctuating widely like it had

before.

With the increasing production of biogas, the team had to quickly develop methods to collect

and possibly store the biogas for extended periods of time. The first methods of collection we devised

used a plastic grocery bag and a rubber band to create a gas-tight seal. This proved effective initially

IX
when gas production was at low. The grocery bags then evolved into an 8-gallon prototype collection

bag created by a trash bag, duct tape and PVC pieces. This prototype proved to be efficient at collecting

gas but was not effective at storing the gas over time.

At this time, the gas production rate greatly increased causing

pressure issues to arise within the system. While a pressure gauge was

installed, it failed to record any readings even when there was noticeable

pressure in the system. To deal with the increasing pressures, the team

decided to create a larger storage bag using a larger trash bag. The volume

chosen was a 55-gallon bag that proved to be somewhat successful at

collecting gas for a short amount of time. After a few days the team noticed

that the gas was diffusing through the bag membrane and the excessive size of the bag caused it to not

fill up as quickly as anticipated because of an over estimation of gas production.

To deal with the leaking bags, the team attempted to pressurize the gas by compressing the bag

in order to force the biogas into a metal tank containing a rubber bladder. This

attempt failed because insufficient pressure to bypass a regulatory valve within

the bladder tank. Although there was a design for a collection system designed

by a member of last year’s group, it was deemed to complex and did not fit our

design challenge of being able to build the biodigester so that it is reproducible

and cost effective.

Tests were then conducted on the biogas using an experimental setup

that involved heating a known amount of water and measuring the initial and final temperatures of the

water. This test consisted of burning the gas and using the heat produced by the combustion to raise the

temperature of a beaker of water. The energy typically found in biogas is 80 BTU per gallon of gas. While

methane has a BTU value of 133, biogas is only 600 because of the 40% that is CO2 and does not

X
combust (Dana, 2010). By heating the water, we hoped to

calculate energy of the gas. By knowing how much energy

there was in our gas sample, we could figure out the

composition of the gas. This was an important aspect to our

project because we had not come up with a method to test

the composition of the gas that could help determine what

application the gas would be best used for. The first time the

test was conducted, the results produced estimated the

amount of energy produced per gallon of methane to be

about 8 BTU per gallon, which is one tenth of the expected value. This result was found to be very low

with the reason being that not enough water was used causing it to boil. Once the water boiled, there

was a lot of energy that was lost through the water vapor that evaporated and the phase change of

water to gas. Heat loss to the atmosphere was also credited as a source of error in the calculation.

A second test was conducted with the hope to improve upon the first trial. This time the team

used a larger quantity of water and a slightly more controlled version of the experiment setup. This

second test yielded results that were much better than those of the first test however they were still not

to expected levels. The calculated energy value per gallon of gas was now at about 20 BTU. The error in

this experiment was again credited to heat loss to the environment and through the heat transfer

process involving the container holding the water. Due to the fact that the container was metal, a lot of

the heat from the combustion was absorbed into the container before it could heat the water. This led

to our results being inaccurate because a lot of the energy could not be determined because it was not

used in heating the water.

XI
 During the final presentation to the sponsor and a group

of interested local community members the team was finally able

to successfully use the gas as a fuel for cooking. The team adapted

a grill located near the biodigester so that the 8-gallon prototype

bag could easily be fitted to the burner. We compressed the bag

thus forcing the gas out of the bag and through the burner where

it was ignited. Once lit, a cooking pan was placed on the burner

and an egg was cooked in the pan.

We also achieved the final goal of developing relevant

operational and troubleshooting guides so that Nuestro Huerto can successfully manage the biodigester

in the future. The team compiled an Operations Guide as well as additional deliverables including a Feed

Data Record sheet and Scrubber Check-Up Guides. These accomplished the objective of producing

deliverables capable of establishing institutional knowledge for the sponsor to ensure the future success

of the project.

XII
Recommendations:

1. Proposed methane compression techniques

A. The gas collection bag can be placed inside of a rigid structure, such as a trash can, or

another container with vertical sides. A weighted platform placed on top of the bag

would compress the gas to levels that can allow us to move the gas into a more

permanent storage vessel such as a propane or air tank.

B. A compression pump can easily be made from a bike pump which would intake gas from

the short term gas storage vessel and then compress the gas moving it into a more

permanent storage vessel such as a propane tank, via the pump.

XIII
2. Nuestro Huerto should establish a feeding schedule that would maximize the production rate of

the biodigester. This would be done initially through trial and error by measuring and controlling

the amount of feed, number of times fed per week, temperature inside and outside, etc. We

made a feeding schedule that fit our needs, but this would have to adapted based on the

availability of resources in the future, such as amount of food and peoples availability to feed

the biodigester. Additionally, a schedule to remove gas and effluent should be created. A form

for these tasks has been made and can be found in the appendix

3. To lessen or eliminate reliance on external electrical and water input, for sustainability and

financial benefit, we recommend Nuestro Huerto make use of a solar panel and rain collection

system. The current method to power the heating mat uses electricity from a wall outlet. While

this is a convenient and relatively cheap method for energy, it reduces the biodigester’s

sustainability, as it becomes reliant on a nonrenewable source of energy. Although the initial

cost of a solar panel might be high, it would pay for itself eventually, as it would eliminate

XIV
electricity costs created by the heating mat. Also it is a cleaner, more sustainable source of

energy than a wall outlet. This is because the electricity from the solar panel is from a renewable

source and produces no emissions while the electricity from the wall comes from traditional

power sources such as coal, which produce a lot of greenhouse gases. By including rain barrels,

rainwater can be collected to be used for mixing the feed and for a potential CO2 scrubber.

Currently water is taken from a sink to mix the feed. This method is the only possibility for the

winter months as the water from a rain barrel would freeze. However, including a barrel would

make use of wasted water that would normally just fall on the ground. This method of collecting

water also makes the biodigester more sustainable because it reduces water usage from

Nuestro Huerto.

XV
Authorship
All team members added to the development of the overall outline and revision of the entire

report. Justin Marsh contributed to writing and revising of the final submission, and he drew most of the

diagrams included. Alex Silk helped format the final submission as well as wrote and edited particular

sections. Joe Pizzuto led in outlining sections to be written and helped revise the final version. Natalie

Marquardt led primarily in editing and revising the content of this submission. Most of the content was

written collaboratively, by dividing each section into four parts for each team member to write. All team

members have given feedback on and approved each other’s work, and all agree on this final

submission.

XVI
Table of Contents
Abstract................................................................................................................................. I
Acknowledgments ............................................................................................................. II
Executive Summary ............................................................................................................III
Authorship.........................................................................................................................XVI
Table of Figures ..............................................................................................................XIX
1.0 Introduction ................................................................................................................. 1
2.0 Background .................................................................................................................. 4
2.1 Urban Agriculture ........................................................................................................... 4
2.2 Biogas and Biodigesters: ................................................................................................. 7
2.2.1 Biogas: ...................................................................................................................... 7
2.2.2 Biodigesters: ............................................................................................................ 9
2.3 The Nuestro Huerto Biodigester ...................................................................................12
2.3.1 Potential benefits ...................................................................................................12
2.3.2 Adapting the Phase 1 design ..................................................................................13
3.0 Design Challenge ......................................................................................................17
3.1 Human Centered Design ................................................................................................17
3.2 Initial Assessment ..........................................................................................................19
3.3 Development of the Biodigester Feeding Process........................................................20
3.4 Improved Roof and Heat Retention ..............................................................................22
3.5 Maintaining Mesophilic Conditions ................................................................................24
3.6 Cleaning Biogas and Maintaining Pressure....................................................................27
3.7 Effluent ..........................................................................................................................30
3.8 Gas Collection and Storage ...........................................................................................31
4.0 Conclusion ...................................................................................................................36
5.0 Recommendations ......................................................................................................37
6.0 Literature Cited .........................................................................................................39
Appendix A: Additional Readings ..............................................................................................41
Appendix B: Operation Guide ...................................................................................................44
How It Works..............................................................................................................................45
Feeding Guide .............................................................................................................................47
Maintenance Guide.......................................................................................................................52
Troubleshooting Guide .................................................................................................................55

XVII
Appendix C: Brochure ...............................................................................................................56
Appendix D: Feeding chart........................................................................................................57
Appendix E: Effluent Collection sheet ......................................................................................58
Appendix F: H2S Filter Sheet .....................................................................................................59
CO2 scrubber capacity: ........................................................................................................60
BTU Calculation: ..................................................................................................................60
Potential Methane yield.......................................................................................................60

XVIII
Table of Figures
Figure 1: Greenhouse at Nuestro Huerto ................................................................................... 2
Figure 2: Anaerobic Digestion Process (Gunaseelan, 2004) ...................................................... 8
Figure 3: Large Bag Style Digester (Weiland, 2010) .................................................................10
Figure 4: Floating Drum Collection (Dana, 2010) ......................................................................11
Figure 5: Initial state of biodigester at site .................................................................................12
Figure 6: Solidworks rendering of digester piping, Phase 1 .......................................................13
Figure 7: Inside the biodigester box, mid Phase 1 .....................................................................14
Figure 8: Insulated collection space, Phase 1 ...........................................................................15
Figure 9: Damaged old roof.......................................................................................................19
Figure 10: Initial feedings with funnel ........................................................................................20
Figure 11: Design matrix for roof design ...................................................................................23
Figure 12: New roof implemented with chimney style feed tube ................................................24
Figure 13: Final thermometer design attached to feed tube cap ................................................25
Figure 14: Dated thermometer readings ....................................................................................26
Figure 15: PVC H2S filter...........................................................................................................28
Figure 16: Design matrix for PVC filter ......................................................................................28
Figure 17: Effluent drainage system ..........................................................................................30
Figure 18: Grocery bag capturing biogas ..................................................................................31
Figure 19: Popped roof from excessive pressure ......................................................................32
Figure 20: 8 gallon collection bag ..............................................................................................32
Figure 21: Water boil test in Goddard Hall.................................................................................34
Figure 22: Recommended drawing for carbon dioxide scrubber ................................................37

XIX
1.0 Introduction
Sustainability, is “the quality of not being harmful to the environment or depleting natural

resources, and thereby supporting long-term ecological balance” (Random House, 2015). Using

resources sustainably is an especially important goal of small-scale organizations that farm in cities. With

sustainable operations, these communities can thrive independently despite the potentially harmful

impacts of their industrial surroundings. Urban farms can improve what are often degraded, compacted

urban soils through application of compost and organic fertilizers created from recycling food waste;

they can also use food wastes as feedstock to produce renewable energy (e.g. heat) through anaerobic

digestion. This renewable energy source can help urban farmers heat greenhouses and extend the

growing season to maximize crop yields. The independence gained from practicing sustainability allows

urban farmers to practice and profit from their trade while being environmentally conscious and

beneficial.

Nuestro Huerto is an urban farm located in Worcester, MA, founded in 2009. Their mission is “to

foster community resilience by making urban food production a viable possibility for Worcester

residents (Nuestro Huerto, 2009).” They grow vegetables, flowers, and herbs to sell to Worcester

residents, local restaurants, and farmers markets. They hope to use the food and plant waste that they

generate to produce a useable energy source in the form of methane gas and to serve as an educational

example for the community. Last year, another IQP team built a biodigester for Nuestro Huerto but

despite efforts to create a functional small scale biodigester, the prototype built last year did not reliably

produce biogas. Nuestro Huerto wants to use food waste to create biogas, both as a means of

generating usable energy, and as an educational example for the community.

The biodigester at Nuestro Huerto was built by a previous IQP team, and their design will be

referred to as Phase 1. Phase 1 was incomplete, as systems for feeding and managing the biodigester,

1
and for capturing biogas were not established, nor were suitable educational documents about

operating and troubleshooting the biodigester developed. Our task was to implement our own Phase 2

design, the intention of which was to improve the biodigester to a fully functional state, establish a

means to filter and store the biogas, and an institute plan to apply the final methane gas product as an

energy source to benefit Nuestro Huerto.

The first step was to study the anaerobic digestion process and the functionality of

biodigesters. We then analyzed the original state of the Nuestro Huerto biodigester and made

improvements to its physical structure, functionality and manageability. As part of a human centered

design process, throughout this project, we took into account the resources and capacity of Nuestro

Huerto to manage the biodigester far into the future.

Figure 1: Greenhouse at Nuestro Huerto

This project established a solid understanding of how biodigesters function, which will be

discussed in the background section, and then applied that knowledge to the Nuestro Huerto

biodigester. First we assessed the site needs and needs of the sponsor. It was important to research

2
similar biogas operations in order to achieve a working knowledge of the system. In addition to this, we

implemented useful problem solving techniques in order to improve efficiency of communication within

the group as well as with the sponsor. Personal communication and conversations were vital in creating

a process that can be sustained by this community, fits their lifestyle, and will provide them with long-

term benefits. Finally, we applied appropriate solutions through human centered design,

experimentation, assessment, and modification.

3
2.0 Background

2.1 Urban Agriculture

The Food and Agriculture Organization (FAO) of the United Nations defines urban agriculture as

“the growing of plants and the raising of animals within and around cities” (FAO, 2014). It is an industry

that creates fresh, locally grown produce in an urban setting. The practice generally involves large

communities, and greatly impacts these communities and the urban area as a whole (Ringenbach,

Valcourt, & Wang, 2013). Urban agriculture is practiced in many countries around the world, however it

is increasing in popularity in the United States. Urban agriculture in the US is tied to de-industrialization.

In the 1970’s, the practice of offshoring factories became very popular among American manufacturers

(The Week, 2011). Factories that once used land and provided jobs in American cities began to migrate

to Mexico and Asia. This migration produced abandoned lots and unemployed workers. From these

abandoned lots a new, community-driven practice emerged, as community gardens took root in these

vacant lots. These smaller gardens quickly evolved into larger urban farming initiatives, producing fresh

food for local residents to consume or sell for a profit (Philpott, 2010).

Between the 1970’s and today, local and national programs have been established to help

promote urban farming, such as Growing Power, the national leader of the “Good Food movement”

(Growing Power, n.d.). Existing programs have also expanded their interests to include urban farming,

such as the United States Department of Agriculture (USDA, “Urban agriculture” n.d.).

Modern urban agriculture in the US has become a multifaceted practice, with various styles and levels of

success, including small-scale community gardens for personal consumption, and larger farming

initiatives that are run like businesses for profit.

There are several obstacles that make urban farming difficult. Urban farms are much smaller

and denser than rural farms, as large open spaces are scarce in cities, and most urban farmers are

compelled to grow their food on small plots of land that they do not own (Mougeot, 2000). Land

4
availability and land tenure are major constraints but urban farmers face additional challenges as well.

In highly industrial environments, soil can be prone to contamination, making crops grown in these

conditions prone to health risks from contaminant uptake (Ringenbach, Valcourt, & Wang, 2013). In

temperate climates, especially continental climates (climates with considerable variation in temperature

which typically occur in northern Asia and North America), little work can be done during the winter

months (A. Barker, personal communication, Sept. 16, 2014). Additionally, in drier climates, watering

crops can become difficult, especially in dense arrangements, as plants are forced to compete for

resources (Ringenbach, Valcourt, & Wang, 2013). Moreover, many cities also have laws and regulations

that can inhibit urban agriculture. For example, a 2013 zoning policy in Philadelphia that restricted the

use of commercially zoned areas put 20% of Philadelphia’s existing urban farms and community gardens

at risk due to zoning conflicts of having agricultural plots in commercial areas (McGoran, 2013). All of

these challenges work to hinder the growth and practice of urban agriculture, however, there are many

other factors that are favorable.

There are several organizations across the country, and even some international organizations,

that work to promote urban agriculture in American and international cities. Sharing Backyards is a

Canada-based organization that links people who would like to grow food in an urban setting with

people who have unused space available for farming. By helping to foster a productive relationship

between farmer and land owner, Sharing Backyards achieves their goal of “every single person who

wants to garden, can garden.” This organization not only operates in Canada, but also in the US and New

Zealand as well (Sharing Backyards, n.d.). Another organization that promotes and aids the urban

agriculture community is Food Field. Located in Detroit, Food Field promotes urban agriculture by

setting environmental, social, and economic goals to strengthen the community and the success of their

operations (Food Field, n.d.). In addition to private organizations, governments can also help to promote

urban agriculture. The city of Chicago, for instance, specifically amended their zoning laws to allow more

5
community gardens and urban farms, as well as helping to integrate them with the community by

minimizing potential negative impacts on the surrounding neighborhood, such as conflict within

industrial and commercial zones (City of Chicago, 2015). Even internationally, the FAO recognizes the

importance of, and supports the integration of urban agriculture, with programs in Burundi, Colombia,

Guatemala, Namibia, Venezuela, and many other countries (FAO, 2014).

There are many reasons that an urban agriculture initiative may exist in an area, as the practice

has many benefits. Urban agriculture increases the availability of access to healthy food, and increases

food security (FAO, “Urban agriculture”). It also provides education about agriculture to people who

would otherwise have no experience with the process (Ringenbach, Valcourt, & Wang, 2013). It not only

provides healthy food for the growers, it is also an industry that generates tens of millions of dollars

yearly as income for urban farmers (Mougeot, 2000). Farmers’ markets are becoming increasingly

popular, and are an excellent way to provide income to farmers, and to share locally grown food with

the community, increasing their access to fresh and healthy produce (FAO, “Urban agriculture”). Finally,

it also promotes the ideals of sustainability within the community, by recycling waste, utilizing otherwise

empty space, and distributing food without wasteful packaging or transportation expenses (Ringenbach,

Valcourt, & Wang, 2013).

One of the less obvious impacts that an urban farming initiative can have on the larger urban

community is innovating new ways to be sustainable. One such way of promoting sustainability is the

practice of using biogas as an alternative energy source. This process is particularly conducive to farms,

as they tend to have access to large quantities of food and plant waste. The use of methane as a means

of producing energy can be traced back to 17th century England, but it wasn’t until the early 1930’s that

the technology boomed and researchers rapidly expanded methods of creating biodigesters to safely

produce and capture biogas. Many reports of small scale biodigesters have been documented from

6
developing countries starting from the 1970’s. Numerous advancements have been made since then,

contributing to the modern practice of biogas production (Sasse, 2013).

2.2 Biogas and Biodigesters:

2.2.1 Biogas:

Biogas is a gas mixture containing roughly 60% methane (CH4), 40% carbon dioxide (CO2), and

trace amounts of hydrogen sulfide (H2S) and hydrogen gas (H2). Biogas is the main product of an

anaerobic digestion process, which involves four stages (Dana, 2010). These stages are shown in Figure

2. The first stage, hydrolysis, is where enzymes begin to break down larger polymers and molecules such

as proteins, carbohydrates and fats from the feed, into amino acids, sugars, and fatty acids. This leads

into the second stage of the process, acidogenesis. During this stage, the products of the hydrolysis

stage are converted to volatile fatty acids and alcohols. In the third stage of anaerobic digestion,

acetogenesis, bacteria break down these volatile fatty acids into acetic acids. The final stage of the

process is methanogenesis, in which acetic acid is converted into the final products of methane and

carbon dioxide (Kim, 2012).

One of the most important factors in anaerobic digestion is temperature. The temperature in

the digester will determine what type of bacteria will grow and the rate at which they will produce

biogas. There are two different types of bacteria that can drive the process of anaerobic digestion. The

first type of bacteria is called mesophilic bacteria. These bacteria prefer temperatures around 35

degrees Celsius. The other type of bacteria are thermophilic bacteria. Thermophilic bacteria prefer

warmer temperatures nearing 55 degrees Celsius. Thermophilic bacteria are very specialized and can

become unstable if the operation conditions are constantly changing. On the other hand, mesophilic

bacteria are more resilient to changes in operating conditions (Kim, 2012).

7
 Another major difference between the two types of bacteria is the fact that thermophilic

bacteria have a faster reaction rate than mesophilic bacteria. This means that the thermophilic bacteria

can digest more influent matter than mesophilic bacteria. Under thermophilic conditions, it takes about

four days to generate gas, depending on the feed material. Using mesophilic conditions, it will take

about 17 days to generate a similar volume of gas (Kim, 2012).

Figure 2: Anaerobic Digestion Process (Gunaseelan, 2004)

Because of the mixed composition of the biogas the methane must be separated from the other

gases in order for it to be used effectively. If the hydrogen sulfide is not removed from the biogas, it can

lead to the corrosion of tanks and equipment that are used to collect and utilize the gas. Also, burning

biogas with hydrogen sulfide will create sulfur dioxide as a byproduct, which is environmentally

hazardous. Hydrogen sulfide is commonly removed by using iron oxide. The iron atoms in the iron oxide

binds with the sulfur atoms in the hydrogen sulfide, creating iron sulfide on the surface of the iron in

addition to water vapor. In small biodigesters, iron oxide is usually used in the form of iron shavings or

steel wool that the gas flows through for filtration (Inthapanya, 2013).

8
 Like hydrogen sulfide, carbon dioxide is another gas that needs to be removed in order to have a

more pure methane product. Methods of removing carbon dioxide include physical absorption using

water, chemical absorption using basic compounds, adsorption on solid surfaces, and membrane

filtration (Kapdi, 2005). If carbon dioxide is not removed from the biogas, it will not burn as effectively as

it would without the carbon dioxide (Dana, 2010).

2.2.2 Biodigesters:

Small scale biodigesters are used around the world to produce low cost, sustainable energy.

They are commonly used in developing areas such as India, Africa, and other countries in Asia and South

America where traditional energy sources are expensive or unavailable. Biodigesters can also be useful

in urban agriculture, as a potential source of clean, sustainable energy. Biodigesters are also being used

more frequently in developed countries where people are trying to live greener lives and be more

sustainable because they are less expensive than traditional energy sources and use easily available

materials.

One challenge in using biodigesters is collecting the generated gas. Because of methane’s

physical properties, it would be too costly and not feasible for urban agriculture groups to liquefy the

biogas like traditionally done with propane. One method to capture the gas involves using large bags,

which take up a lot of room and are prone to leaks (See Figure 3). A benefit to this method is that it is

simple and one can see how much gas has been generated. Another way to capture the gas is to store it

in a floating water drum (See Figure 4). Some positive aspects of this method are that it is easy to see

how much gas has been produced, and it can be easily pressurized by adding weight to the top of the

drum. A problem with this method is the water in the drum can freeze at low temperatures and it is

possible to spill and lose the collected gas. A third method to contain the gas is to pressurize it in a tank

9
and then transfer the gas into a propane tank. This process takes more work than the other methods

and involves equipment that is not easily accessible.

One important part of the biodigester’s operation is the feed used, or the organic material to be

broken down by the bacteria culture in the anaerobic digestion process. This organic material can vary

from animal manure to ground up fruits and vegetables (Gunaseelan, 2004). Feed can be categorized as

either wet or dry, based on its aqueous percentage of the final mixture, also known as slurry. A feed

with 15% or more solid organic material is considered “dry” and is only considered an option in small

scale biodigesters. Since wet feed exposes more surface area to the bacteria culture, it is the more

productive method of feeding a biodigester, but is not always applicable in barren environments

(Weiland, 2010). In order for a biodigester to produce the most methane that it can, the feed must have

a high concentration of volatile solids. A report from Gunaseelan (2004) reflects on the potential

methane yield from differing fruits and vegetables for a large scale biodigester. These numbers can be

easily translated to fit our small scale design when calculating our potential yield as well. A reference to

the table (Tauseef, 2013) can be found in the appendices. This report shows that citrus matter contains

the highest percentage of volatile solids and would allow for the highest methane production. On the

other hand, cellulose based organic material such as tree leaves and celery produced the least amount

of methane because of their low percentage of volatile solids (Gunaseelan, 2004).

Figure 3: Large Bag Style Digester (Weiland, 2010)

10
 Figure 4: Floating Drum Collection (Dana, 2010)

The amount and type of feed will ultimately determine how much gas can be produced.

Depending on the setup, energy may have to be used to maintain operation, in the form of heaters, feed

mixers/grinders, electrical pumps, etc. It is essential that the amount of energy produced by the digester

is greater than what is used to produce biogas, otherwise, it results in a net energy loss. In order to

make sure a biodigester operates efficiently and maximizes the energy gain, all components of its

operation must be assessed and implemented in a cost-effective manner.

11
2.3 The Nuestro Huerto Biodigester

2.3.1 Potential benefits

The use of a biodigester at Nuestro Huerto provides a number of benefits for the local

Worcester urban agriculture

community. These benefits include

reduction of food waste, renewable

energy production, and education

opportunities. Resources required to

run a biodigester include an abundance

of organic material and a means of

constant high temperature, two things

Figure 5: Initial state of biodigester at site

Nuestro Huerto can easily produce

without any real negative impacts on their operations. In fact, collecting organic waste from the

community is a benefit in and of itself, as this waste will not contribute to landfills or greenhouse gas

emissions. The biodigester’s byproducts can also be used to improve plant growth at Nuestro Huerto.

Digested feed from a biodigester will eventually need to be extracted from the mixing tank to make way

for new feed to be added and digested. This digested feed, or effluent, retains properties that make it an

excellent fertilizer for plant growth. In addition to this, the carbon dioxide scrubber produces a

renewable resource as well in the form of C02 rich water that can be used to further aid plant growth.

With two instances of plant growth acceleration as well as a positive yield of energy, the biodigester

benefits suit Nuestro Huerto and their self-sustainability mindset.

By using food waste to generate gas, biodigesters will help keep groups practicing urban

agriculture sustainable and efficiently using food scraps and other plant waste as fuel for the digester.

This helps limit the contribution to the use of landfills and other waste management sources. Another

12
advantage of biodigesters used in urban agriculture is that a byproduct of the process is a liquid

fertilizer, which helps to reduce reliance on fertilizers produced from unsustainable means. This fertilizer

is nearly odorless and does not attract insects and pests, unlike traditional compost fertilizers. A third

advantage to using biodigesters is that it limits the amount of methane that would be released to the

environment. By using composts, the natural digestion of the food waste creates methane that goes

directly into the atmosphere as a greenhouse gas. However, by using a biodigester, that methane is

being used and burned, and is not released into the atmosphere as a pollutant. Another byproduct of

biodigesters that can be helpful for practitioners of urban agriculture is a carbon dioxide enriched water

source. In systems that use a carbon dioxide scrubber, water that has been saturated with CO2 becomes

a byproduct. This enriched water has been shown to improve plant growth compared to watering plants

with non-carbonated water (Enoch, 1992).

2.3.2 Adapting the Phase 1 design

Figure 6: Solidworks rendering of digester piping, Phase 1

13
 The biodigester located at Nuestro Huerto was built to operate as a small scale biodigester and

to produce enough methane gas to heat the greenhouse on site at Nuestro Huerto in late March to

provide a suitable environment for seedlings, ultimately extending the growing season. The final

schematic of the Phase 1 biodigester built by last year’s team can be seen in Figure 6.

The biodigester vessel that holds the food waste slurry is just a simple, plastic tank. The influent

pipe, or feeding tube, goes all the way to the bottom of the tank to ensure that the slurry is fed from the

Figure 7: Inside the biodigester box, mid Phase 1

bottom which is a key aspect to the design. This is important so that the new, undigested influent is

added below the more digested slurry. Eventually when the influent or slurry has become fully digested,

it will rise to the top of the tank, where it can be removed through the effluent pipe. Another

characteristic of this feed tube design is an easier removal of the methane gas from the digester tank.

With the influent being added at the bottom of the digester tank, it will force the methane gas gathering

in the space above the slurry out of the tank through the gas release pipe that is labeled on the model

above.

14
 Despite these numerous benefits of the design for the influent pipe, there are possible

drawbacks to the design as well. The main drawback is that the influent tube may be clogged by larger

parts of solid food waste at the very bottom of the tank. This buildup could result in a thick sediment at

the bottom of the tank that may be difficult to remove, even if the drain valve is opened, as well as limit

the efficiency of the digestion process.

As mentioned previously, temperature is a vital part in the anaerobic digestion process that is

taking place inside the digester vessel. In order to ensure easy maintenance of the proper temperature,

the Phase 1 biodigester included a heating mat that is located underneath the digester vessel. To control

the temperature of the heating mat and thus the tank and its contents, the Phase 1 team installed a

thermostat that is wired to the heating mat. Along with the heating mat, another important aspect of

temperature control is insulation or heat retention of the box that contains the digestion tank.

To deal with the problem of insulation, the Phase 1 team coated the inside of the box that

contains the tank with R19 fiberglass insulation. This provided an insulated base for the box, on all of its

sides. In addition to the insulated wall material, the group stuffed the open space between the tank and

the sides of the box, including the roof, with fiberglass insulation. On top of the fiberglass insulation the

Figure 8: Insulated collection space, Phase 1

15
group stapled a thermal-heat shield to add even more heat retention to the insulation system. The

insulation inside of the biodigester box can be seen in Figure 8 (K. Gagnon, S. Peoples, C. Bloniasz,

personal communication, September 20, 2014).

The Phase 1 team concluded their work on the project by building the biodigester as well as

inoculating the anaerobic digestion process inside of the tank, by introducing bacteria to hopefully

produce some methane. Although they had no way of collecting any of the gas, the team managed to fill

the tank with a slurry composed of 65 pounds of cow manure and 193 gallons of water. This slurry

provided the necessary fuel and the live mesophilic and thermophilic bacteria required to digest it. After

introduction, either a mesophilic or thermophilic culture would develop from the slurry. In addition, the

Phase 1 team was able to compile technical guidelines for how the biodigester should be fed and with

what feed. They calculated that the influent should have an approximate composition of about 79% of

volatile solids per gallon of water (Gagnon, Peoples, & Bloniasz, 2014). They also presented calculations

to find the percentage of volatile solids in a given feed source as well as a table of various feed materials

and their volatile solid percentages. All of this information and more on how to restart the digestion

process and how and what to manage and monitor in the system at Nuestro Huerto can be found in the

Operator’s Handbook (Gagnon, Peoples, & Bloniasz, 2014).

The challenge presented to our team on the project was to continue where the Phase 1 team

left off. During Phase 1, the sponsor’s goal was to produce the methane and use it as an energy source

to heat its greenhouse in order to help germinate and grow seedlings in the spring. This goal was revised

to first make the biodigester operative and then to focus efforts on capturing and storing methane in a

viable, safe, and sustainable way. The sponsor also stated that if it is deemed impossible or

unsustainable to properly heat the greenhouse, then the use of the methane could be applied to

another task and the biodigester could primarily serve educational purposes as an operating prototype

for others in the local area of Worcester.

16
3.0 Design Challenge

To begin our project, we formulated a design challenge: How can we further develop the

biodigester’s operation in order to produce a viable product while keeping the needs, hopes, and

aspirations of Nuestro Huerto in mind? To answer this question, we looked at several factors that could

improve the biogas production, including the type of feed, feeding methods, and advancements that

could be made to improve the Phase 1 structure and the internal digestion process, as well as ways to

test the products created by the biodigester, to confirm that we have achieved our goal.

3.1 Human Centered Design

To help us focus the project on the end-user and their experience, we used a method known as

Human Centered Design. Human Centered Design involves using techniques and strategies to

successfully develop solutions, with the human user in mind. This process involves three lenses of focus:

desirability, feasibility, and viability. Desirability takes into account what is wanted by listening to the

needs of the people. Feasibility organizes what is and what is not technically possible. Viability considers

what is financially reasonable for the project. The goal of this Human Centered Design process is to

overlap all three lenses and fulfill the design challenge (Human Centered Design Toolkit, IDEO).

At the very beginning, it was important for our group to identify what the sponsor was hoping to

achieve as a result of the project. In order to fully understand the challenge presented by Nuestro

Huerto, a meeting was held at the site of the biodigester with the sponsor representative, Amanda

Barker. During this meeting, Ms. Barker was asked what her vision for this project was. She described

how she wanted to see the biodigester fully operational. Her goal was to extend their growing season by

heating their greenhouse in late winter months to allow for seedling growth. In order to properly grow

seedlings, the greenhouse would have to be around 32℃ during the months (late February - early

March) when growing begins. However, based on the results of the Phase 1 IQP, it was unclear whether

17
or not this would be a plausible objective. Regardless, Ms. Barker expressed her wish to create biogas,

and to use it in any way that could be helpful to their operations. Other options presented to us, in the

event that the greenhouse could not be heated adequately or when the greenhouse does not need to

be heated, were to use the gas as fuel for cooking on a grill or to produce electricity with a generator.

Additionally, Ms. Barker expressed her wish that the operation of the biodigester contribute to

the sustainability of their farming practices. Because the biodigester requires a constant temperature, a

heating source was needed, especially in the winter months. Ms. Barker wanted us to use as little

energy as possible while heating the biodigester. Another constraint that results from the cold climate of

New England, is the fact that no water outside of the biodigester vessel can be utilized due to freezing

conditions, therefore limiting various collection and filtration methods that involve water. An additional

request from Ms. Barker was to keep the biodigester as simple as possible to ensure that anyone would

be able to operate it. The size of the Phase 1 biodigester box was also to be maintained into Phase 2,

prohibiting any possible space additions.

One specific practice taken from the Human Centered Design Toolkit (IDEO 89) was “empathetic

design.” This includes the development of a positive relationship to increase the likelihood of a

successful project outcome. The idea behind this approach is to obtain a deep understanding of what

feelings and ideas the stakeholders have regarding the project, in order to engage them into a co-design

process. This allowed us, as the design team, to become straightforward and transparent with the

sponsor about our ideas, data, and overall level of success throughout the duration of the project, and

get appropriate feedback from them to integrate their ideas. One very important way that we achieved

this with our sponsor was with the use of prototypes, in the forms of models and sketches. These

prototypes created a tangible medium for us to discuss ideas with the sponsor. Together using the

prototypes, we could visualize the ideas, allowing for easy understanding, critique, and adaptations of

each idea, before final implementation of the collaborated result.

18
 Our sponsor had expressed a desire for the creation of durable institutional knowledge, so that

the project can continue to run and benefit the urban farm community however it may evolve in the

future. It is necessary that the knowledge to maintain the project does not rely on one singular person,

but rather on the community as a whole, so that as community members come and go, the project can

remain as productive and educational as possible. The use of sketches was essential in accomplishing

this goal and these were compiled into the operations manual, which aims to educate individuals about

the biodigester processes as well as aid the facilitation of its future operations. For the operations

manual to be effective, the Human Centered Design approach was instrumental. Ms. Barker relayed to

us that she wanted it to be very simply written and easy to follow by someone who may have almost no

previous knowledge of the biodigester system. After meeting with our sponsor, we turned our attention

towards the biodigester itself.

3.2 Initial Assessment

When our team arrived in early September to see the

biodigester, the heating mat had been turned off, the feed cap was

open to the atmosphere, and inside of the biodigester vessel was

roughly 200 gallons of stagnant slurry used by the Phase 1 team in

an attempt to begin a bacteria culture in the spring of 2014. From

last year’s report, we ascertained that the contents of the slurry

were a mixture of about 65 pounds of fresh cow manure and 193

gallons of water (Gagnon, et al, 2014). The gas collection sub-

system of the biodigester had not been created and the biogas

outlet pipe was closed with a valve. The roof of the biodigester box

had been severely damaged from inclement weather over the Figure 9: Damaged old roof

summer months and was sagging in the middle near the location of the feed tube. The insulation had

19
also suffered serious water damage and needed repairs as well. However, the most pressing task was to

reboot the anaerobic digestion process inside of the digester vessel, which had slowed to a stop. This

began with feeding the biodigester and making improvements to the feeding process.

3.3 Development of the Biodigester Feeding Process

In order to restart the bacteria colony established in Phase 1, we began feeding the biodigester

food scraps that we collected from the compost pile near the biodigester. These included rotten fruits

and vegetables, other food scraps, and brewery spent grain (BSG). To begin feeding, a process had to be

developed to reduce the food waste to small chunks that would fit down the feed pipe without clogging.

Different methods of chopping were considered, including food processors, hand-powered meat

grinders, and drill bit attachments. While these options are feasible, none of them were deemed

suitable due to their reliance on added electricity and concerns

about reproducibility. As an alternative, we experimented with

manually chopping with various tools, such as shovels, hoes,

and pitchforks. It was found that a flat hoe worked the best,

however it still left some larger chunks, mainly orange peels

that could not be completely cut or mashed up.

As the fall season came to an end, new problems in the

feeding process were revealed. The winter months proved to

be difficult for feeding the biodigester because of a couple of

issues. Due to intense weather conditions, it was difficult for

our team to travel to the biodigester and feed it on a

Figure 10: Initial feedings with funnel

regimented schedule. For part of the winter, the biodigester

could not be reached, due to the amount of snow that had accumulated surrounding it, even when

20
travel to the site was possible. In addition to not being able to access the biodigester, the amount of

food waste available for feeding had decreased. During the warmer farming season, there was a lot of

available food waste in the form of rotten fruits, vegetables and fresh compost materials. The cold

temperature froze the primary source of biodigester feed in the form of fresh compost, extremely

limiting the amount of feed available throughout the majority of the winter. The decrease in the number

of feedings and the amount of available feed lead to decreased gas production to the point where

essentially no gas was being produced. This caused us to realize how important consistency and size of

the feedings are to the biodigester’s production.

Once we returned to feeding the digester regularly, the problem of how to estimate gas

production potential needed to be addressed. In order to properly estimate how much gas would be

produced, the weight of the feed must be known. In the beginning of the project, we did not have

access to any sort of scale and just fed the biodigester everything we had without knowing the actual

amount, and therefore had no means to calculate gas outputs in relation to food inputs. This restricted

our ability to evaluate potential uses of the gas for heating purposes, as we did not know what the

production rate would be. This also limited the reproducibility of the biodigester, as we could not make

recommendations on how much feed could optimize the system. Eventually we acquired a scale through

our sponsor in order to compare theoretical to experimental gas production rates. We determined that

on average we would feed the biodigester a 4-gallon mixture comprised of approximately 9-10 pounds

of miscellaneous solid food waste and 20 lb. of water each feeding.

Because of the design of the feed tube, it was difficult to lift the 20-30 pound bucket to the top

of the tube without spilling or having to climb on top of the roof in order to feed it. Standing on top of

the roof presented safety concerns as it did not feel sturdy enough to hold too much weight, and was

also slippery when wet. In addition to the feed tube being placed in an awkward position, it did not

initially have a cap after Phase 1.

21
3.4 Improved Roof and Heat Retention

With winter approaching and the roof in bad condition, we decided that a new roof had to be

designed and built. The main issue with the Phase 1 roof was its inability to keep water out of the

insulation surrounding the vessel and piping. Fiberglass insulation is rendered ineffective when wet,

meaning that heat could easily escape through the insulation and roof. Mold had also begun to grow in

the insulation directly surrounding the feed tube, which began to smell and further limit the insulation’s

heat retention ability. We assessed the issues with the roof and concluded that the fact that it was flat

allowed water to accumulate in the middle and caused sagging. In addition, the Phase 1 roof was poorly

waterproofed. A single sheet of roofing paper with an unreinforced flap for feed pipe access provided no

sort of moisture defense.

Before designing and installing a new roof, we needed a temporary fix to protect the biodigester

box from further water damage. Phase 1 had left a tarp covering the roof, but it was worn out and

ripped at the corners. We purchased a new tarp that was specifically designed for long term outdoor use

and screwed it to the sides of the biodigester box to keep it in place. This was not enough to fully fortify

the biodigester against the weather, but it was enough to reduce its impact until we could implement a

more appropriate, permanent solution.

After researching different designs and styles of roofs, a decision matrix (see Fig.11) was created

in order to analyze the most viable roof design option. We weighed each factor with respect to the

importance of its impact on the final result of the design. A scale of 1-10 was used to represent the

desirability of each factor of each design. The value of 10 represents the ideal situation and the most

positive impact, while a 1 represents the least positive impact. Ensuring the digester could be safely and

easily fed was the forerunning factor of our roof design decision. With this in mind we set the “Feed

Accessibility” factor with the highest weight and chose the “Cost” factor to be the lowest weight since all

22
three design options would roughly result in the same amount of material used. The factors and their

respective weights along with each design’s score can be seen below:

Designs

A-Frame Inclined Flat

Factors Factor Weight Score / 10

Simplicity 0.25 4 6 9

Feed Accessibility 0.35 5 7 4

Climate Defense 0.25 9 8 2

Cost 0.15 4 8 9

Total 1 5.6 7.15 5.5

Figure 11: Design matrix for roof design

The decision matrix showed that the inclined roof design would be the most feasible option. We

began the development of the roof with simple sketches showing size and shape. We then evolved

these sketches to show more detail such as support for the roof and materials needed for the

construction. With the inclined roof design, there were two possible ways to access the feed tube. The

first being a flap cut into the roof and the second being a chimney style feed tube through a hole cut in

the roof. We took these ideas and schematics to Ms. Barker, and together we analyzed and evaluated

them collaboratively. After discussion, the inclined roof with a chimney style feeding tube was chosen as

the final design of the roof. Once the materials were acquired, the roof was constructed using plywood

and 2x4s. A plastic waterproof lining was wrapped around the exterior to increase the roof’s weather

defense. After the lining, corrugated steel was drilled into the top using self-tapping screws. The layers

overlapped going up the incline of the roof, to ensure rainwater would flow smoothly off and not seep

into the lining or plywood. Creating a hole for the feed tube presented a challenge during the

construction. The team decided it would be best to drill the hole using a metal hole-saw bit that was

slightly larger in diameter than our feed tube to make sure the chimney would fit. When attempting to

23
drill the hole, we depleted two drill batteries and over-heated a wired hammer-drill with no success of

boring a hole. We finally created the hole by taking metal snips and cutting around the desired outline

made by the hole-saw bit. In addition to replacing the roof, we replaced old the ineffective insulation.

An image of the Phase 2 roof can be seen with Figure 12.

3.5 Maintaining Mesophilic Conditions

Figure 12: New roof implemented with chimney style feed tube

The bacteria that live inside of the biodigester vessel require a very specific environment, with

the most important factor being the temperature. The condition of the open feed tube, left by Phase 1,

was concerning because of the amount of heat that was lost through it. In order to fix this problem we

installed a removable PVC cap on the open end of the feed tube. This helped with heat retention within

the system by limiting heat loss through the open end of the feed tube. The feed tube was located next

to two open holes that, in Phase 1, were intended to be used for an internal heat source (heating coil)

and a manometer or pressure column to measure pressure inside of the system. We determined that

these access holes would not be useful, as the heating coil was redundant with the heating mat, and the

planned manometer would be inaccessible in that location, so they were not going to be useful, and

24
capped them as well. This was to further improve heat retention, as well the elimination of oxygen in

the system, another important aspect of the bacteria’s environment.

To determine the temperature of the biodigester, we needed to install a thermometer. Initially,

we obtained a thermometer that could read temperatures of two separate locations. This was useful

because it allowed us to know both the internal temperature of the biodigester vessel as well as the

temperature of the outside environment. Knowing this allowed us to see how well the insulation worked

to retain the heat as well as whether the temperature was ideal for the bacteria. The thermometer

showed us that the biodigester was running at over 150 degrees Fahrenheit, and that the thermostat

that controlled the heating mat was not accurate. This thermometer did not last very long due to

humidity and orientation issues causing it to break. Being in a

horizontal position for too long caused the fluid inside to give

inaccurate readings. A better solution was needed, and research

efforts were directed to find the thermometer that would best

fit our design challenge. A thermometer was found that fit our

financial constraints and could record temperatures over

extended periods of time.

The new thermometer was attached to a thin metal

wire and placed inside the feed tube. The team believed that

this was the best spot as we could directly see the temperature

of the slurry inside the biodigester vessel. Over a period of a few

months, the thermostat was slowly dialed in and the

Figure 13: Final thermometer design
attached to feed tube cap
temperature readings stabilized. This was difficult as the winter

months began and the outside temperature was continuously dropping. This can be seen in Figure 14.

25
 Figure 14: Dated thermometer readings

Also shown in the graph are brief and sudden dips that are caused by the times that the thermometer

was removed from the biodigester, while we extracted the data from it. This continued until the battery

(which was supposed to last for a year) unexpectedly died, causing a gap in the data. Additionally,

shortly after the battery was replaced, the thermometer was accidentally lost inside the biodigester,

26
causing another gap in the data. During a feeding, the thermometer was not removed beforehand, and

ended up being pushed down, irretrievably into the tank, along with the feed.

Once a replacement for the second thermometer was purchased, a new method of putting the

thermometer inside the biodigester was needed, so that the same mistake would not be repeated. To

keep the thermometer from falling into the biodigester again, it was attached to a PVC pipe, which we

permanently fixed to the cap. This way whenever the cap is taken off, the thermometer comes out, and

when it is put back on, the thermometer is returned. While the data was steadier once the second

thermometer was installed, the temperature began to decline. This could have been caused by the

heating mat being unplugged. The thermostat also may have turned off the heating mat since it is

reading the temperature of the area around that biodigester tank, which had increased due to warmer

spring weather, and not inside the tank, where the thermometer is located.

Another condition that needed to be maintained for a healthy bacteria colony was the pH level.

To check the pH level of the biodigester, a pH test strip was used in the effluent from the biodigester.

Because effluent was only collected once, the pH was only tested once. The strip showed that the

biodigester was at a pH of 8, which is right in the middle of the desired 7.5-8.5 range. Once these

conditions were met, the biodigester began producing a reliable source of energy.

3.6 Cleaning Biogas and Maintaining Pressure

Purifying the biogas is an important step that must be completed before it can be stored or

used. The two main ways this can be done is by scrubbing, or removing, the hydrogen sulfide (H2S) and

carbon dioxide out from the biogas. The removal of these gases can be done using filters, before the gas

is collected for use or storage.

The first filter we focused on implementing was the hydrogen sulfide filter. The reason behind

this was because removing hydrogen sulfide is more critical to the collection process due to its corrosive

properties. The reduction of carbon dioxide simply allows more gas to be stored in a smaller area, since

27
its percent methane will be increased. The H2S filter

uses steel wool to remove the H2S from the biogas, as

described earlier in the background section. The

removal of this compound serves two main purposes:

to reduce the odor of the gas and to reduce its

corrosive properties. The two options for the filter

casing came down to a glass jar and a PVC casing

roughly 8” in diameter. Our weighing of the options

can be found below in another decision matrix below

where the factors were assigned weights based on the

importance of the factor to us and our sponsor. The

Figure 15: PVC H2S filter
designs were then scored in each factor based on a

scale of 1-10, exactly like the decision matrix created for the analysis of roof designs.

Designs

Glass Jar PVC

Factors Factor Weight Score / 10

Cost 0.1 8 4

Ease of Use 0.3 5 7

Reproducibility 0.1 6 6

Effectiveness 0.2 5 6

Size 0.1 5 7

Design 0.2 6 9

Total 1 5.6 6.8

Figure 16: Design matrix for PVC filter

28
 Seeing that it would fit better into our design and it is more resistant to breaking, we went with
the PVC casing.

The second filter, the carbon dioxide scrubber, was then considered. We brainstormed

containers that could be used to house such a filter and came up with ideas such as glass or acrylic

prisms so the person collecting the gas would be able to see the biogas bubble through the water due to

their transparent properties. We calculated that with a 10 gallon filter, the water would need to be

changed every 3.4 cubic meters of gas that passed through, which we estimated to happen about every

three feeds of 9-10 pounds of miscellaneous solid food waste. Although the carbon rich water is ideal

for aiding plant growth at Nuestro Huerto, when we discussed our ideas with Ms. Barker, she expressed

concerns. She explained that the high volumes of water required for an effective filter would be

unmanageable to keep up with. Our burn tests showed that the biogas burned effectively without

having the carbon dioxide scrubbed out, and for these reasons, a carbon dioxide scrubber was not built

or implemented.

A point to be made about the use of these filters is that they only work as the biogas travels

through them. The only way for the biogas produced in the vessel to travel through them is for pressure

to build within the entire system. The anaerobic digestion naturally produces this pressure as food

waste digests, and in order to monitor this process we decided it would be useful to measure this

pressure. A pressure gauge was purchased and attached to the system’s piping just before the H2S filter.

The pressure gauge ranged from 0-100 psi making it less precise at the lower limit. This caused the

gauge to never register a reading even though gas passed through the piping it was located on under a

noticeable pressure. Knowledge of the value of pressure would have allowed us to directly relate a

pressure reading to how much gas is in the system at any given time. This could also be used as a safety

measure, by never allowing the system to reach a particular pressure that would cause a breach of the

PVC connections or a rupture of the entire system.

29
 Initially, the lack of a pressure reading was thought to be the result of a leak in the system. To

ensure that this was not the case we secured and sealed all of the PVC pipe connections located

underneath of the roof during the roof replacement process. We also had the pressure gauge tested,

confirming that it functioned as it was meant to. After this, there was still no pressure reading, even

when it was clear that there was pressure in the system because gas was being forced out when the

valve was opened. This allowed us to form the conclusion that the pressures we were dealing with were

too small to be registered by the large range pressure gauge.

3.7 Effluent

Once we had fed the digester enough to reach a slurry level above the bottom of the effluent

pipe, and there was a sufficient amount of pressure inside, we were ready to remove some effluent. The

back pressure inside forces the effluent out

through the effluent valve, if opened, until it

reaches a pressure equilibrium. The effluent is

very useful for two reasons: it can give us an idea

of the current conditions inside the digester, and it

can be used as a fertilizer for plants.

We were able to collect approximately 5

gallons of effluent in a large bucket, and tested the

pH of this collection using pH litmus paper strips.

This testing method is easily available to our

sponsor for future use to maintain the correct

levels. The pH we measured was about an 8, which

is perfectly in the middle of the ideal value range Figure 17: Effluent drainage system

of 7.5-8.5. If the pH level was found to be outside of this range, it can be lowered or increased by adding

30
more acidic or alkaline foods, as we recommend in our operations manual (Appendix A). After we

finished testing, we gave the effluent to Ms. Barker, which she used to fertilize a patch of raspberry

bushes growing near the biodigester.

3.8 Gas Collection and Storage

In order to collect the methane, we needed to decide on a

method to safely store the biogas. Without having a way to contain

the gas, it cannot be used effectively and will end up being wasted.

Because of methane’s physical properties, unlike propane, it requires

extreme pressures to liquefy at room temperature. This means that

methane cannot be easily stored in a propane tank in sizeable

quantities suited for longer term storage. The initial method we used

to collect the biogas was putting plastic grocery bags around the end

of the biogas line fixed by a rubber band (Figure 18). Once gas was

produced, we opened the valve at the end of the biogas line allowing
Figure 18: Grocery bag capturing
biogas
the stored pressure inside the digester vessel to fill the bag. This

method was used because only a small amount of gas was being produced at the time, and the bags

were cheap, available, and took little pressure to fill. They also allowed us to quickly test the contents

due to their portable and disposable nature.

Different designs for gas collection were researched until one was found that fit the design

requirements set by the team and Ms. Barker. A design was selected that incorporated a sealed trash

bag as a collection device. The benefits of the bag are a low cost, portability, availability, and ease of

construction and use. A prototype methane storage bag was made using a white, thin trash bag that

held eight gallons of gas. This bag was used to temporarily store the gas we collected so the system

31
could safely generate more. The construction of the bag was simple and

easily reproducible using a PVC connection consisting of two parts that

screwed into each other. We fixed the connection on opposing sides of one

wall of the trash bag and poked a small hole for gas to travel through. We

then duct taped the open side of the trash bag shut and attached a valve to

the external PVC piece to create a closed system. An image of our prototype

collection bag can be found in Figure 20.

As the spring season approached and climate temperatures began to

rise, more feed became available strengthening the bacteria culture and Figure 19: Popped roof from excessive
pressure

reinvigorating gas production. After each feeding, roughly 6-7 gallons of gas

was collected, which our 8 gallon storage bag could not fully contain for successive days. This increased

amount of gas production began to cause issues when gas was not released for extended periods of

more than 24-48 hours. One of these issues was the metal roofing surrounding the feed tube would pop

up due to the feed tube under so much pressure as seen in Figure 19.

Another major issue was the increased back pressure of the system

which was caused by the gas pushing slurry back up the feed tube.

One instance of this resulted in slurry shooting up and out of the feed

tube causing an overflow of effluent. In order to stop this from

occurring, the team discovered that if gas is released prior to taking

the feed cap off, the back pressure will be reduced. Because of the

increase in gas production, the team built a larger bag of around 55

gallons using the same PVC connections and method. The larger bag

proved to be successful in capturing gas, but not for very long. The gas
Figure 20: 8 gallon collection bag
would diffuse out of the bag, as it was noticeably less full before every

32
feeding. After further inspection we realized the bag began to tear which led to a complete loss of all

collected gas. For this reason, the larger collection bag was discarded.

A more permanent storage solution was designed using a bladder tank that was present from

the project last year. After collecting a fairly large sample of gas in the 55-gallon bag, we attempted to

compress the methane and transfer it into the vacated bladder tank. This test was done by attaching the

gas bag to the tank via PVC piping with a pressure gauge and a valve to secure the system. After the bag

was attached to the bladder tank, we compressed the gas bag by hand and then opened the valve to

allow transfer between the bag and bladder tank. When the valve was opened, no pressure was

measured on the pressure gauge and no flow from the bag into the bladder tank appeared evident. This

solidified the test as a failure, however much was learned from this attempt at compression.

Through this test, the team found out that there may be some sort of regulatory valve in the

bottom of the bladder tank that could require a certain amount of pressure to overcome thus opening

the bladder. This theory can be supported by the fact that there was no pressure registered on the

gauge during the attempt.

3.9 Biogas Testing and Application

The gas that was collected was tested in different ways, to determine the gas’s chemical energy.

In the initial grocery bags, a hole was punctured into the bag and the gas that escaped was ignited with

a lighter. The first bag that was filled did not produce a very large flame and did not stay lit long. This

shows that the bag did not contain a sufficient concentration of methane, as it did not ignite fully. This

was to be expected, however, as low concentrations of methane are common when a bacteria culture is

first being established. After more time had passed, another bag was filled and tested. This bag quickly

ignited with a large blue flame, indicating an appropriate concentration of methane in the biogas.

33
 Once the biodigester was consistently producing gas, we wanted to do a more accurate test to

determine its composition. This would allow us to give an accurate estimate of how much energy per

unit volume could be released from burning the gas. One way that we tried to test the gas was using a

gas chromatography, which would let us know the percentage of each substance present in the gas. We

contacted various professors at WPI to see about using a gas chromatograph on campus, unfortunately,

it can only be used on liquids that have been evaporated into a gaseous state which is impossible to do

with methane since it is naturally gaseous at room temperature.

Another method that we considered was the use of colorimetric gas detection tubes. By passing

a set volume of gas through these tubes, they would measure how much carbon dioxide is present,

changing color accordingly to show the percentage of carbon dioxide in the gas. Because of the

composition of biogas, it can be assumed that remaining percentage is almost all methane, with only

trace amounts of other gases. However, after discussing this method as a team and with our sponsor,

we concluded that this method would be too expensive.

The simplest way that we found to test the gas’s

energy output was by burning it. Gas samples were

collected using the 8 gallon prototype collection bag, and

an experiment was set up in Goddard Hall to boil a 25 mL

sample of water at room temperature (22 degrees Celsius)

to test for energy potential. A glass beaker containing the

water was mounted using a clamp with a thermometer

placed in the beaker. The bag with an added makeshift

nozzle was then placed beneath it. Once the valve was

opened we lightly compressed the bag to force a steady Figure 21: Water boil test in Goddard Hall

stream of biogas out of the nozzle and lit the end using a lighter. Right away, the gas began to burn a

34
shade of blue and the temperature of the water sample began to increase rapidly. In under a minute,

the sample was boiling and an estimated one gallon of gas was burned during the process. With a quick

calculation involving the temperature difference and the standard BTU consumption of heating water,

we estimated that one gallon of the biogas yielded 8 BTU (Appendix E).

With this number seeming extremely inefficient, we decided to refine our experiment and run it

again using a full 8-gallons of gas. We decided to heat 3 liters of water in an aluminum bowl using the

same method as before, which turned out to be a success. We chose a larger amount to prevent the

water from reaching its boiling point and having a more finite temperature gradient when calculating

the estimated BTU/gallon of biogas. The initial temperature of the water was 21.8 degrees C and the

final temperature was 34.1 degrees C. After similar calculations (Appendix F) this experiment resulted in

one gallon of the biogas yielding roughly 24 BTU. Although this is more than double our previous

experiment, it is still well below being an energy efficient system with respect to the amount of energy

added through the heating mat. This low estimate was likely caused by heat being absorbed by the

metal test bowl that held the water and heat loss to the air surrounding the experiment, as well as an

overestimation of the amount of gas contained in the bag.

However, at a presentation to demonstrate our final results and educate people from the local

Worcester community about the potential for biogas production, we were able to successfully cook an

egg as an example of an application for the biogas. In order to accomplish this, we adapted a grill that

was located near the biodigester to connect to an eight gallon collection bag. Pressure was manually

applied to the bag to push the gas out and into a burner that had a baking pan on it and an egg in the

pan. This test showed that the gas can be used as a viable cooking fuel at Nuestro Huerto.

In this final presentation, we demonstrated every aspect of our overall goal. We fed the digester

to produce gas, we filtered and collected gas, we used the gas in a beneficial way, and we educated the

community on its operations and benefits, by demonstrating the whole process.

35
4.0 Conclusion

In the beginning of this project, the team set out to improve a biodigester to an operational

condition, so that the energy it produced could be used to heat a greenhouse in the late winter months

to assist early seedling growth for a local urban farm. After researching similar operations around the

world, our team was able to create solutions to productively create, filter, and store the biogas. In

addition to this, we wrote a user manuals to aid in the future use and sustainability of the Nuestro

Huerto biodigester. A presentation was given to the local urban agricultural community with the

intention of educating about biodigesters and how they can be used as a means to increase

sustainability in a community. The biogas produced proved to be of a high enough quality to ignite and

create heat. Using the energy from the biogas, the team was able to boil water and cook food. This fell

short of the sponsor’s ultimate goal of heating a greenhouse, however, the biodigester can still be a

useful tool to Nuestro Huerto. Until a long term storage method can be found the biodigester would

best be used for cooking fuel and as an educational model for a sustainable system. The future of the

biodigester project at Nuestro Huerto relies on the creation of a feasible heating system for the

greenhouse.

36
5.0 Recommendations

After working on this project over the course of the past academic year, the biodigester has

gone through numerous improvements and changes. With this being said, there are a few

recommendations that may be beneficial to the advancement of not only the biodigester, but also the

project as a whole. These recommendations have been compiled into the following: deliverables,

biodigester improvement plans, and project ideas.

Our first recommendation comes in the form of a proposed methane compression process. The

process is an adaptation of a method using a floating drum collection system. With the floating drum

system, weights can easily be placed on top of the floating drum to increase the pressure of the

methane that has collected inside. We took this idea and adapted it to eliminate the water aspect in the

drum of the system and included the storage bag that we have implemented thus far. A diagram of the

suggested compression process can be seen below.

Figure 22: Recommended drawing for carbon dioxide scrubber

37
 Another recommendation is to set forth a definite feeding schedule that would maximize the

production rate of the biodigester. This can be done through trial and error by measuring the amount of

feed, number of times fed per week, temperature inside and outside, etc. These variables can all be

controlled and changed in order measure the waste to methane conversion rates, ultimately yielding

information that can be used to optimize the system. In addition to this, it is necessary to establish an

efficient schedule for removing effluent and methane from the biodigester. Because the pressure in the

system is dependent on both of these levels, they must be balanced properly. A procedure must be

established that takes this into account to ensure proper slurry and gas levels in the tank to avoid over

pressurizing the biodigester vessel.

A third recommendation is to install a solar panel on the biodigester to power the heating mat

to make the whole system more sustainable. While the heating mat currently uses roughly 3 kWh/day,

adding a solar panel would make it completely independent of electricity added from outside the

system. In addition to a solar panel, a rain barrel can be used to collect water for the feed mix. This

would eliminate the need to use tap water and would make the biodigester more sustainable. One

challenge that we faced this year was preparing the food waste for feeding the biodigester. Our method

to chop the food waste was to use a hoe to manually break apart the food. This is a tedious, inefficient,

method that leaves behind large chunks of food. By using a food disposal system, this task would be

much easier and quicker, while only using a small amount of electricity.

38
6.0 Literature Cited
Barker, A. (2014). Personal Communication, First Meeting. In N. Marquardt, J. Marsh, J. Pizzuto & A. Silk
(Eds.).

Bloniasz, C., Gagnon, K., & Peoples, S. (2014). Turning Waste Into Heat: Designing an Anaerobic Digester
to Extend the Growing Season for Small Scale Urban Farmers: Worcester Polytechnic Institution.

Bryan, A., & Link, N. (2012). Food Field. 2014, from http://www.foodfielddetroit.com/

Dana, R. (2010). Micro-scale Biogas Production: A Beginner’s Guide. National sustain.

Enoch, B. H., & Olsen, J. M. (2006). Plant response to irrigation with water enriched with carbon dioxide
(Vol. 125): New Phytologist.

(FAO), F. a. A. O. (1999). Urban Agriculture. 1. Retrieved from

http://www.fao.org/ag/magazine/9901sp2.htm

Gagnon, K., Peoples, S., & Bloniasz, C. (2014). Designing Biodigester for Urban Farm. Worcester
Polytechnic Institute Electronic Projects Collection, E-project-101614-164946. Retrieved from
http://www.wpi.edu/Pubs/E-project/Available/E-project-101614-164946/

Gunaseelan, V. N. (2004). Biochemical methane potential of fruits and vegetable solid waste feedstocks.
Biomass and Bioenergy, 26(4), 389-399.

IDEO, Human-Centered Design Toolkit - A Free Toolkit for NGOs and Social Enterprise (2009)

Inthapanya, S., Chathaokalor, D., Phongpanith, S., Leng, R. A., & Preston, T. R. (2013). Fermentation of
fruit waste in an anaerobic batch digester. Livestock Research for Rural Development, 25(9).

Kapdi, S. S., Vijay, V. K., Rajesh, S. K., & Prasad, R. (2005). Biogas scrubbing, compression and storage:
perspective and prospectus in Indian context. Renewable Energy, 30(8), 1195-1202.

Kim, M., Ahn, Y.-H., & Speece, R. E. (2002). Comparative process stability and efficiency of anaerobic
digestion; mesophilic vs. thermophilic. Water Research, 36(17), 4369-4385.

McGoran, J. (2013). Zoning Amendment Threatens Urban Farms in Philly - Home - gridphilly.com.

Mougeot, L. J. A. (2000). Urban agriculture: definition, presence, potentials and risks. Growing cities,
growing food: Urban agriculture on the policy agenda, 1-42.

Philpott, T. (2010). The history of urban agriculture should inspire its future. Retrieved from
http://grist.org/article/food-the-history-of-urban-agriculture-should-inspire-its-future/

Power, G. (2014). About | Growing Power. from http://www.growingpower.org/?page_id=89

39
Ringenbach, J. A., Valcourt, M. T., & Wang, W. (2013). Mapping the Potential for Urban Agriculture in
Worcester A Land Inventory Assessment. from http://www.wpi.edu/Pubs/E-project/Available/E-project-
042813-132523/

Sasse, L., Kellner, C., & Kimaro, A. (1991). Improved biogas unit for developing countries. Deutsche
Gesellschaft für Technische Zusammenarbeit (GTZ) GmbH, Vieweg & Sohn Verlagsgesellschaft
Braunschweig.

Sharing Backyards. 2014, from http://www.sharingbackyards.com/about.sby

Sustainability. (n.d.). Dictionary.com Unabridged. Retrieved May 05, 2015, from Dictionary.com website:
http://dictionary.reference.com/browse/sustainability

Tauseef, S. M., Premalatha, M., Abbasi, T., & Abbasi, S. A. (2013). Methane capture from livestock
manure. Journal of environmental management, 117, 187-207.

USDA. (2014). Urban Agriculture | Alternative Farming Systems Information Center. from
http://afsic.nal.usda.gov/farms-and-community/urban-agriculture

U. S. E. I. A. (2014). U.S. Energy Information Association. Retrieved from http://www.eia.gov/

Weiland, P. (2010). Biogas production: current state and perspectives. Applied Microbiology and
Biotechnology, 85(4), 11.

40
Appendix A: Additional Readings

Al Seadi, T., & Lukehurst, C. (2012). Quality management of digestate from biogas plants used as
fertilizer.

Baron, D., Leginski, J., Malek, A., Murphy, T., & Smith, A. (2008). Biogas Compressor Project.

Baron, G. (2005). A small-scale biodigester designed and built in the Philippines.

Bhattacharya, S. C., Mizanur Rahman Siddique, A. H., & Pham, H.-L. (1999). A study on wood gasification
for low-tar gas production. Energy, 24(4), 285-296.

Bramely, J., Fobi, L., Peterson, C., Rainville, L., Hao Shih, J. C., Teferra, A., et al. (2011).
Agricultural Biogas in the United States (pp. 191). Tufts University.

Cox, P. M., Betts, R. A., Jones, C. D., Spall, S. A., & Totterdell, I. J. (2000). Acceleration of global warming
due to carbon-cycle feedbacks in a coupled climate model. [10.1038/35041539]. Nature, 408(6809),
184-187.

DeBruyn, J., House, H., & Rodenburg, J. (2006). European Anaerobic Digestion Tour Report: Ontario
Ministry of Agriculture, Food and Rural Affairs.

Eng, M. (2014). Chicago's urban farms have yet to harvest sustainable jobs, better health.

Flesch, T. K., Desjardins, R. L., & Worth, D. (2011). Fugitive methane emissions from an agricultural
biodigester. Biomass and Bioenergy, 35(9), 3927-3935.

Fulhage, C., Sievers, D., & Fischer, J. (1993). Generating Methane Gas from Manure.

Goberna, M., del Mar Camacho, M., Lopez-Abadia, J. A., & García, C. (2013). Co-digestion, biostimulation
and bioaugmentation to enhance methanation of brewer’s spent grain. Waste Management &
Research, 31(8), 805-810.

Imhoff, K. (1923). Germany Patent No.

Jaffrin, A., Bentounes, N., Joan, A. M., & Makhlouf, S. (2003a). Landfill Biogas for heating Greenhouses
and providing Carbon Dioxide Supplement for Plant Growth. Biosystems Engineering, 86(1), 113-123.

Kennedy, C. (2009). Green House Gas Emissions from Global Cities. Environmental Science and
Technology, 43.

Kurchania, A. K., Panwar, N. L., & Pagar, S. D. (2011). Improved Biogas Stove with Scrubbing Unit for
Household Use. Waste and Biomass Valorization, 2(4), 397-402.

41
Lansing, S., Botero, R. B., & Martin, J. F. (2008). Waste treatment and biogas quality in small-scale
agricultural digesters. Bioresource technology, 99(13), 5881-5890.

McClintock, N. (2010). Why farm the city?: theorizing urban agriculture through a lens of metabolic rift.
Cambridge journal of regions economy and society, 3(2), 191-207.

Naja, G. M., Alary, R., Bajeat, P., Bellenfant, G., Godon, J.-J., Jaeg, J.-P., et al. (2011). Assessment of
biogas potential hazards. Renewable Energy, 36(12), 3445-3451.

NAL Digital Repository. Anaerobic digestion of municipal solid waste and agricultural waste and the
effect of co-digestion with dairy cow manure Available from
http://AU4SB9AX7M.search.serialssolutions.com/?V=1.0&L=AU4SB9AX7M&S=JCs&C=JC_013168867&T=
marc

NAL Digital Repository. Production of biogas in landfill cells using beef cattle manure collected in open
lots Available from
http://AU4SB9AX7M.search.serialssolutions.com/?V=1.0&L=AU4SB9AX7M&S=JCs&C=JC_013207253&T=
marc

Rajendran, K., Aslanzadeh, S., & Taherzadeh, M. J. (2012). Household biogas digesters—a review.
Energies, 5(8), 2911-2942.

Ringenbach, J. A. (2014). IQP_Local_Food_Production_Team.pdf. from http://www.wpi.edu/Pubs/E-

project/Available/E-project-042813-132523/unrestricted/IQP_Local_Food_Production_Team.pdf

Sacher, N., Paclijan, S. S., Gensch, R., & Spuhler, D. (2011). Biogas Electricity (Small Scale). Retrieved
09/16/14, 2014, from http://www.sswm.info/category/implementation-tools/reuse-and-
recharge/hardware/energy-products-sludge/biogas-electricity-#reference_book505

Sami M. Magomnang, A.-A., & Villanueva, E. P., Ph.D. (2014). Removal of Hydrogen Sulfide from Biogas
using Dry Desulfurization Systems International Conference on Agricultural, Environmental and
Biological Sciences.

Scholz, M., Melin, T., & Wessling, M. (2013). Transforming biogas into biomethane using membrane
technology. Renewable and Sustainable Energy Reviews, 17, 199-212.

Shakhashiri, B. (2011). Chemical of the Week: Methane. from

http://scifun.chem.wisc.edu/chemweek/PDF/Methane.pdf

Singh, R., & Mandal, S. K. (2011). Microbial removal of hydrogen sulfide from biogas. Energy Sources,
Part A: Recovery, Utilization, and Environmental Effects, 34(4), 306-315.

Smit, J., Ratta, A., & Nasr, J. (1996). Urban agriculture: food, jobs and sustainable cities. Urban
agriculture: food, jobs and sustainable cities.
Sources of Greenhouse gas Emissions. (2014). from
http://www.epa.gov/climatechange/ghgemissions/sources/industry.html

42
Svrinivasan, J. (2008). Climate Change, Greenhouse gas and Aerosols. Resonance.

Taherzadeh, M. J., & Karimi, K. (2008). Pretreatment of lignocellulosic wastes to improve ethanol and
biogas production: a review. International journal of molecular sciences, 9(9), 1621-1651.

Weiland, P. (2003). Production and energetic use of biogas from energy crops and wastes in Germany.

Applied Biochemistry and Biotechnology, 109(1-3), 263-274.

43
Appendix B: Operation Guide

NUESTRO HUERTO BIODIGESTER

OPERATIONS MANUAL
Contents
How It Works .............................................................................................................................................................................. 45
Feeding Guide.............................................................................................................................................................................. 47
Maintenance Guide ..................................................................................................................................................................... 52
Troubleshooting Guide .............................................................................................................................................................. 55

Full schematic of biodigester system. The arrows represent the direction of biogas flow through the system.

44
 How It Works
• Inside of the biodigester box, there is a plastic “biodigester vessel” with an
influent (feeding) tube, and two additional pipes for gas and effluent exit.
• The feed tube is designed so that the when the food exits the tube it is at the
bottom of the slurry. It also has an angled opening to help avoid clogging.
o As the solids in the slurry are digested and become liquid, they become
less dense and floats to the top of the slurry for removal. Removal of
effluent is necessary so that the tank does not overfill. This process is
covered in the maintenance section of the operation guide.
• Above the slurry is an empty space in between the slurry and the top of the tank.
The biogas fills this space after it is created, before it is collected.
• This biogas will exit the tank through the gas pipe which takes the gas through
the scrubbers and then into the bladder tank/bag for storage.
o The biogas enters the Hydrogen Sulfide scrubber first, this scrubber
removes a corrosive component of the biogas (H2S) by passing the gas
through steel wool. The iron in the wool binds with the sulfur in the H2S
and removes it from the gas.
o The second scrubber is the CO2 scrubber. This scrubber involves passing
the gas through water, where the CO2 is partially absorbed by the water.
This scrubber has not been installed on our biodigester, as it is not a
necessary component. The advantage of removing the CO2 is to maximize
storage volume for methane gas, as it removes some of the CO2 from the
gas that cannot be burned.
• One option is to use the CO2 scrubber as a seasonal filter. In the spring and
summer months, more gas will be produced, as there is more available feed
material, meaning that maximizing storage is more important. Also when the
water from the filter is warmer, more CO2 can be absorbed, making it more
efficient.
• If the filter is installed, but the water is not changed, it will not harm the biogas,
nor will it help the biogas.
• After the gas has been scrubbed, it is now mainly methane gas and is ready to
be stored in a storage vessel.
• A two way valve will be used to regulate the flow in and out of the storage vessel.
This can be seen in the full schematic of the biodigester.
• When filling the storage vessel, the valve will be opened so that the filtered
methane can enter the storage vessel.

45
• After the storage vessel is full, and no more gas is going inside of it, the valve will
be closed off completely ensuring that the gas collected remains in the storage
vessel. At this point the storage vessel can be completely removed from the
system and taken to wherever it is needed.

• The above picture on the left shows the effluent pipe and valve located on the left
of the picture and the gas pipe located on the right.

• In the picture on the right, the hydrogen sulfide filter is shown attached to a gas
collection bag by a ½” 2 way PVC valve. The valve will be detached from the
scrubber and then attached to a burner or heating apparatus that has a ½”
opening. The heating source or burner may have to be adjusted to fit the valve,
as the burner on the grill was by adding tape to the burner so that it was thicker
and fit more snug in the bag’s valve. Additionally different PVC fittings can be
added to change the size of the opening to fit different appliances.

• In order for gas to come out of the bag and into a burning apparatus, pressure
needs to be applied to the bag. This can be done by squeezing the bag at a
pressure that forces the gas out at a desired rate or by placing a weight on the
bag that forces it out. An advantage of doing it manually is that you can adjust
the force as needed. A disadvantage is that it requires constant work by the user.
An advantage to using a weight is that it requires no effort form the user. A
disadvantage is that it may be too much or too little force if the size of the weight
is not right, causing the gas flow rate to either come out too fast and burn too
quickly or not come out fast enough and not provide as much heat or power.

46
 Feeding Guide
Feeding is a critical component to creating biogas. Without feeding the biodigester, the
bacteria that that create the biogas will die, and no gas will be produced. Any organic
matter can be fed to the biodigester to produce gas.

1. Mix together food scraps, grains, and other organic compounds in 5 gallon
bucket.
a. Fresher waste is better than waste that has been rotting for a long time
2. Make sure to chop up food as small as possible as seen in the picture on the left.
a. The feed hole is less than two inches wide, so chunks should be smaller
than that if possible
i. methods to do this can be using a shovel or hoe to mix and chop
ii. large chunks of food can get caught in the feed tube and take
longer time to break down because smaller pieces provide more
surface area allowing bacteria to work more efficiently
b. During and after food has been chopped up, add approximately 2-4
gallons of water to bucket so that the mixture is roughly half water
i. This ensures the feed is mixed, seen in the picture on the right

47
3. Unscrew cap and remove thermometer. (See maintenance guide on how to
withdraw thermometer data.)

48
4. Insert funnel and make sure it is secure by pressing down hard on it and checking to
see if it moves.

49
5. Begin to pour feed mix into funnel, making sure not to spill.

50
6. If the feed becomes clogged, use a PVC pipe to gently mix the feed, creating a
flushing motion. If this does not work, use the pipe to press the feed down into the feed
hole, dislodging anything that has become caught.

7. If feed is too dry, or if not all of the feed came out of the bucket when you went to
pour it, bucket, add water and pour it again to get it all inside the biodigester.

51
 Maintenance Guide
1. To withdraw the thermometer data.
a. Remove the thermometer from its metal casing attached to the feed cap.
b. Plug the thermometer into the USB port of your computer.
c. You will need the EasyLog software, available at:
http://www.lascarelectronics.com/data-logger/easylogger-software.php
Download the one called “EL-WIN-USB Windows Control Software.” This
software is currently only available for Windows computers.
d. Open the EasyLog software and click on “Set up and start the USB data
logger,” and follow the instructions. You may choose the intervals at which
the temperature is taken. Shorter intervals will use up more storage space,
so keep in mind how long the thermometer will be inside the tank before it
will be checked again.
e. Place the thermometer back in its case, and twist tightly to close.
2. Once a month check to see if the steel wool needs to be replaced.
a. If more than 75% of it has blackened take it out and put fresh steel wool
into the filter and screw the cap back on tight.
b. An exact calculation for this reaction is about 0.001kg steel wool / m3 of
gas.
3. ONLY IF CO2 SCRUBBER IS BEING USED.
a. Replace water after every 3.5 cubic feet of gas has been produced.
b. This should be about every three feeds or so.
4. To remove the effluent:
a. Check to see the effluent level. This is the level of the digested food inside
the tank. This can be done by trying to empty effluent from the mixing tank
which can only be done when the level is high enough.

52
 b. First place a container, such as a bucket, beneath the valve. Open the
effluent valve located next to the gas valve. If the level was too high,
effluent will drain out, as pictured below.

c. Make sure to have a large enough container when emptying the effluent,
as it can come out pretty quickly. The valve can always be closed if there
is too much coming out and the collection container needs to be replaced.
d. The collected effluent can now be used as a liquid fertilizer once it is
collected.
e. This needs to be done or else the biodigester will fill up with unusable
waste and will not be able to take in any new food to produce gas.
5. To take pH of effluent:
a. Check by putting pH strip in effluent.
b. It should be between 6.5 and 8.5.
c. If it is too low, add baking soda or ammonia (which are basic) to the feed.
d. If it is too high, add acidic foods such as oranges or lemons.
e. The pH will take some time to correct itself after something acidic or basic
has been added, so wait a week before adding more if it is still outside of
the acceptable range, so as not to shock the system.
f. If the effluent level is not high enough to be collected, use the PVC pipe to
stick a pH strip down the feed tube to test it that way.

53
54
 Troubleshooting Guide

1. If the feeding pipe is clogged from feed chunks being too large:
a. Pour warm water into the feed pipe until it begins to fill all the way up the
feed tube or unclogs it.
b. Take a long, thin pipe and push down the feed.
c. If still clogged, let it sit for a couple hours and then try again. This can
allows feed to work its way down the pipe.
d. If no gas is coming out.
e. Check pH. If not in the correct range of 6.5 to 8.5, refer to part 5 of
maintenance section. PH is one of the vital conditions for the bacteria to
produce gas. The pH must be within 7.5 - 8, or the system will decrease in
gas production.

2. How to check for pressure leaks:

a. Uncover the piping on top of the tank. This can be done by unscrewing the
roof and taking it off. Then remove the insulation and the pipes will then be
visible leaving the tank. This should only be done if a pressure leak is
suspected.
b. Use a soapy water mixture to apply around joints or suspected leaking
areas.
i. If bubbles appear there is a leak that needs to be patched. A patch
can be made with a silicone gel. Or, by heating the spot with the
leak, the plastic can be melted together. In the case of a large hole,
a patch can be made by melting in a new piece of plastic.

3. If the biodigester and its surrounding area begin to smell very strongly:
a. Place a cup of citronella or vegetable oil down the feed tube every few
weeks to help combat smell.
b. Ensure all necessary locations are sealed to maintain the anaerobic
atmosphere of the system. (see 2 on checking for leaks)

55
Appendix C: Brochure

56
Appendix D: Feeding chart

Feeding Outline:
1. Find food waste/organic material, fill 5 gallon bucket slightly less than halfway
recording the “dry” weight of just food waste with no water.
• Record what the feed is comprised of. If you add anything to correct a pH
imbalance, be sure to specifically record those ingredients.
2. Add 2-3 Gallons of water to the food waste and record the “wet” weight of the food.
3. Remove cap from feeding tube with attached thermometer probe that extends down
the feed tube.
4. Ensure that the level of the feed tube is not high enough to hinder feeding.
• If level is too high, open either the gas or effluent valve to relieve pressure of
the system.
5. Once feed level is at appropriate height, attach funnel to top of feed tube securely
6. Pour feed into funnel, making sure not to pour too fast so that funnel becomes too
full.
• If draining of the funnel becomes clogged use PVC “plunger” to clear the
tube.
7. Wash down any necessary leftover food scraps.
8. Replace feed tube cap with thermometer attachment.

Date Time “Dry” Weight “Wet” Weight Ingredients

57
Appendix E: Effluent Collection sheet

Effluent Collection:
1. Place a bucket underneath the effluent tube and open the valve slowly. The effluent
may stop flowing on its own, after which, close the valve. Or you may need to close
the valve as the bucket gets close to being full before it stops flowing.
• If the level in the tank is not high enough inside the tank, no effluent will come
out. This is fine. Just close the valve.
2. Record the weight of the effluent.
• Over a long period of time, the amount of effluent removed should be at least
as much as the difference between the wet and dry weight of the feed added.
• If no effluent came out, record the date and time, and 0 for the weight.
3. Test and record the pH level of the effluent. If it is not between 6.5 and 8.5, refer to
the maintenance guide.

Date Time Weight pH

58
Appendix F: H2S Filter Sheet

H2S Filter Outline:

1. The filter should be checked once a month, and changed as needed.
2. Before opening the filter, make sure that the valves on the pipes on either side of the
filter are closed so that no gas escapes. Then twist off the top of the filter.
3. Inspect the steel wool. If more than 75% of the steel wool has blackened, replace it
with fresh steel wool.
4. Close the filter tightly when finished.

Date Did you change the filter? Percent of filter blackened?

59
Appendix G: Calculations

CO2 scrubber capacity:

2.5 𝑔𝑔 𝐶𝐶𝐶𝐶2 1 𝑚𝑚𝑚𝑚𝑚𝑚 𝐶𝐶𝐶𝐶2 22𝐿𝐿 𝐶𝐶𝐶𝐶2 0.264 𝑔𝑔𝑔𝑔𝑔𝑔 𝑔𝑔𝑔𝑔𝑔𝑔

∗ ∗ ∗ = 1.21
1 𝐾𝐾𝐾𝐾 𝐻𝐻20 12 𝑔𝑔 𝐶𝐶02 1 𝑚𝑚𝑚𝑚𝑚𝑚 𝐶𝐶𝐶𝐶2 1 𝐿𝐿 𝐾𝐾𝐾𝐾 𝐻𝐻20

𝑔𝑔𝑔𝑔𝑔𝑔 𝑔𝑔𝑔𝑔𝑔𝑔
1.21 𝑔𝑔𝑔𝑔𝑔𝑔 𝐶𝐶𝐶𝐶2 ∗ 10 ∗ 0.4% 𝐶𝐶𝐶𝐶2 = 4.84
𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓 𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓

4.48 𝑔𝑔𝑔𝑔𝑔𝑔
∗ 4 𝐾𝐾𝐾𝐾 𝐻𝐻20 𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟 𝑝𝑝𝑝𝑝𝑝𝑝 𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓
1.21 𝑔𝑔𝑔𝑔𝑔𝑔
𝐾𝐾𝐾𝐾 𝐻𝐻20

1𝐿𝐿 0.264𝑔𝑔𝑔𝑔𝑔𝑔 𝑔𝑔𝑔𝑔𝑔𝑔

4 𝐾𝐾𝐾𝐾 ∗ 𝐻𝐻20 ∗ ∗ = 1.05
1𝐾𝐾𝐾𝐾 1𝐿𝐿 𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓

A three gallon scrubber would require the water to be changed roughly every three feeds

BTU Calculation:

1𝑙𝑙𝑙𝑙 𝐵𝐵𝐵𝐵𝐵𝐵
∗ (𝑇𝑇2 − 𝑇𝑇1)𝐹𝐹 =
𝐻𝐻20 𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔

𝐵𝐵𝐵𝐵𝐵𝐵
6.6 𝑙𝑙𝑙𝑙 𝐻𝐻20 ∗ 22.4 𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 𝐹𝐹 = 24.64
𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔𝑔

This yield is roughly 1/3 the amount of BTU we should expect from a gallon of biogas

Potential Methane yield

𝑚𝑚3 𝑔𝑔𝑔𝑔𝑔𝑔 1𝑇𝑇𝑇𝑇𝑇𝑇𝑇𝑇𝑇𝑇 10𝑙𝑙𝑙𝑙𝑙𝑙 1𝑔𝑔𝑔𝑔𝑔𝑔 24𝑔𝑔𝑔𝑔𝑔𝑔

20 ∗ ∗ ∗ 3
=
1𝑇𝑇𝑇𝑇𝑇𝑇𝑇𝑇𝑇𝑇 2204.62𝑙𝑙𝑙𝑙𝑙𝑙 𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓 00.379𝑚𝑚 𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓

60