DD320S

DEVELOPMENT DRILL
TECHNICAL SPECIFICATION

Sandvik DD320S is a compact two-boom jumbo for KEY FEATURES

demanding conditions and multiple applications. The Coverage area 41.4 m² (8 690 x 6 730 mm)
jumbo is capable of face drilling, cross-cut drilling and Hydraulic rock drills 2 x RDX5, 20 kW
bolt hole drilling. Drilling feeds 2 x TF500-12, 12 - 16 ft
Booms 2 x B26XLSF
The various options of the drill rig make it suitable Control system 2 x THC560
for a range of conditions and tasks. The proven and Hole length Up to 4 660 mm
robust B26XLSF boom provides coverage of 41.4 m². A Drift size class (H x W) 4 000 mm x 4 000 mm
selection of fixed and telescopic feeds are available for a Turning width (T-section) 3 700 mm with TF500-12 feed
variety of applications. Transport width 2 150 mm
Transport height 2 350 mm / 3 200 mm
The RDX5 rock drills deliver superior performance with Transport length 12 200 mm with TF500-12 feed
high consumable life, lowering operating costs and Total weight 20 910 kg depending on options
giving long service interval.

Sandvik DD320S offers a new look and improved

serviceability and usability over the predecessor
Sandvik DD320.

1. SANDVIK DD320S - DEVELOPMENT DRILL

HYDRAULIC ROCK DRILL ELECTRIC SYSTEM
Type of rock drill RDX5 (TS2-433) Standard voltage 380 - 690 V (± 10%)
Percussion power 20 kW Total installed power 135 kW
Percussion pressure Max. 220 bar Main switch gear MSE 20
Percussion rate 67 Hz IP classification Specification TS2-132
Rotation speed Max. 250 rpm (with OMS80) Starting method Star delta 380 V - 690 V
Rotation torque 400 Nm (with OMS80) Direct online 575 V
Hole size (drifting) 43 - 64 mm Automatic cable reel TCR3E with spooling system
Hole size (cut hole) 76 - 127 mm Cable reel control Operator station only

T38 - Hex 35 - R32 Batteries 2 x 12 V, 145 Ah

Recommended rod T38 - Hex 35 - Alpha 330 Front and rear lights
T38 - Hex 35 -R35 8 x 50 W LED (4 200 lm, 6 000 K)
(combined working and driving)

Shank adapter (male) T38 Parking rear brake / park lights 2 x Red LED
Weight 210 kg
Length 955 mm
Profile height 87 mm AIR AND WATER SYSTEM
Flushing of holes By water
DRILLING FEED Water booster pump WBP-1010
TF500-12’ TF500-14’ TF500-16’ Water pump capacity 150 l/min
Type of feed
Standard Optional Optional Water pump inlet pressure 2 bar (Min.)
Feed force Max. 25 kN Max. 25 kN Max. 25 kN Flushing water pressure 10 - 15 bar
Total length 5 270 mm 5 880 mm 6 490 mm Shank lubrication device SLU2 (air / oil mist)
Hole length 3 440 mm 4 050 mm 4 660 mm Air compressor CTN9, 1 m³/min (7 bar)
Rod length 3 700 mm 4 305 mm 4 915 mm Rock drill oil consumption 180 - 250 g/h
Net weight 500 kg 530 kg 560 kg Rock dril air consumption 250 - 350 l/min

BOOM OPERATOR’S SAFETY CANOPY

Type of boom B26XLSF (TS2-260) Canopy certification FOPS (ISO 3449)
Face drilling coverage 41.4 m² (parallel holes) Unit height in tramming 3 200 mm
Parallelism Automatic hydraulic Operation Standing drilling, seated tramming
Boom extension 1 700 mm Operator’s seat Seat with safety belt
Feed extension 1 600 mm Sound pressure level EN 16228 Operator station: 100 dB(A)
Boom weight (without hoses) 1 960 kg
Feed rotation angle (roll-over) 360º

HYDRAULIC SYSTEM
Powerpack 2 x HPP555 (55 kW)
Filtration (pressure / return) 20 µ / 10 µ
Oil tank volume 270 liters (drilling)
Oil tank filling pump Manual
Cooler for hydraulic oil OW30 oil-to-water (2 x 30 kW)

DRILLING CONTROL SYSTEM

Type of control system THC560 (TS2-361)
Operating principle Hydraulic control

Direct control
Manual boom control Fully proportional
Hydraulic parallelism

Manual collaring
Feed / percussion control
Drilling control
Anti-jamming system
Flushing control

Automatic cycle Stop and return automatics

2. SANDVIK DD320S - DEVELOPMENT DRILL

CARRIER OPTIONAL FEATURES AND PACKAGES
Type of carrier NC7S (frame-steered) Boom
Carrier articulation ± 40° *Type of boom B26XLS-NV instead of B26XLSF
Rear axle oscillation ± 10° Drilling feed
Ground clearance 320 mm *Feed length 14’, 16’
Diesel engine Cummins QSB 4.5, 124 kW Stage IIIA *Telescopic feed TFX6/12, TFX8/14

Exhaust catalyzer Standard Hydraulic system

Transmission Hydrostatic *Oil tank filling pump Manual
Axles Spicer Drilling control system
Tires 12.00-20 Boom movement isolation switch At each side
Service brakes SAHR type, fail save wet disc brakes Access detector Mandatory in Europe (TS2-211)

Parking and Electric system

SAHR type, fail save wet disc brakes *Electric cable Specification TS2-121
emergency brakes
Ground fault and overcurrent VYK (excluding Canada / USA)
12,5 km/h (Horizontal) protection
Tramming speed
6,5 km/h (14%=1:7=8°) Auxiliary outlet 1 x 110 V or 1 x 230 V, 16 A
Extra working light 2 x 50 W LED (4 200 lm, 6 000 K)
Gradeability / sideways tilt Max. 15° / 5° (according to EN 16228-2)
Amber flashing light LED (24 V)
For 10 - 16 ft rods and two shank
Rod rack on carrier side
adapters
Air and water system
Fuel tank 140 liters Flushing flow control 2 booms
2 x Vertical (front) *Manual end of hole air flushing Including CT28 air compressor
Carrier stabilization Water hose reel with water hose THR2.5E with 38 mm (1 ½”), 65 m
2 x Vertical (rear)
Hand held fire extinguisher 1 x 9 kg (type ABC) Cleaning system
Tramming alarm Standard HP system with reel Up to 180 bar (TS2-343)
Knowledge Box™ Connectivity solution (TS2-535) Greasing systems
Centralized greasing points Specification TS2-463
Colour scheme Sandvik
Manual system Greasing unit with pump, reel and
1 x Operator’s manual nozzle (TS2-463)
1 x Maintenance manual
Documentation 1 x Technical manual (in English only) Operator’s safety cabin / canopy
1 x Parts manual (in English only)
*Safety cabin
2 x Toolman USB key FOPS / ROPS (ISO 3449 / 3471)
Rotating seat
For drilling and tramming

Fire suppression system

Manual or automatic system Ansul, 6 nozzles (TS2-460)
Auto. fire suppression system Sandvik Eclipse™ (TS2-461)

Carrier
*Diesel engine B4.5, 129 kW, Tier 4F, Stage V
*Foam filled tires 4 pcs
Wheel chocks and holders 2 Sets
Rod rack and shank holder On carrier side

Extra items
Berg plug and socket 250 A
Spare rock drill RDX5
Spare wheel assembly Air or foam filled tire
Special tools for rock drill Field tool set (TS2-434)
Complete tool set (TS2-435)
Warranty extension One year (excl. Kazakhstan)
Documentation Extra paper, CATbase, Link one
manuals
*Package: Country specific LAM, CIS, TUR, US/CAN, SAS
options package
*Package: Harsh water Basic or advanced (TS2-049)

*) Replaces standard feature

3. SANDVIK DD320S - DEVELOPMENT DRILL

 COVERAGES
WITH MANUAL OVERRIDE
Type of boom A B C D
WITH PARALLELISM HOLDING *B26F mm 5 980 5 280 6 710 7 690
B26XLSF mm 6 730 6 030 7 730 8 690
*B26XLS-NV mm 6 730 6 030 8 000 9 350
*) Optional boom
A
B

1 850

TS2-394:07/ENG/METRIC © Sandvik Mining and Rock Solutions 2022 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
2 150
C 200
D
Overall length TF512 TF514 TF516 TFX6/12 TFX8/14
*B26F mm 12 100 12 300 12 700 11 700 11 700
B26XLSF mm 12 650 12 850 13 300 12 300 12 300
*B26XLS-NV mm 13 300 13 500 13 950 12 900 12 900
*) Optional boom

850

SANDVIK
DD320S

3 200

15° 320 18°

3 175 915
2 840
Overall length

SANDVIK

2 950 DD320S
10°

Drilling feed Radius (R) T-cross (C) R

TF500–12’ 6 200 mm 3 500 mm 3 200
*TF500–14’ 6 300 mm 3 700 mm 40°
*TF500–16’ 6 450 mm 3 850 mm
*TFX6/12 6 200 mm 3 500 mm
*TFX8/14 6 200 mm 3 500 mm
All dimensions in mm
*) Optional drilling feed

Sandvik Mining and Rock Solutions reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.

ROCKTECHNOLOGY.SANDVIK

4. SANDVIK DD320S - DEVELOPMENT DRILL