Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Three Phase Induction Motor - Squirrel Cage: Data Sheet

    Uploaded by

    jairo

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Three Phase Induction Motor - Squirrel Cage: Data Sheet

    Uploaded by

    jairo
    3 views2 pages

    Original Title

    16284225-DS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views2 pages

    Three Phase Induction Motor - Squirrel Cage: Data Sheet

    Uploaded by

    jairo

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DATA SHEET

    Three Phase Induction Motor - Squirrel Cage


    Customer : WEG PERU S.A.C

    Product line : Special Motor Product code : 16284225

    Frame : 254/6T Locked rotor time : 45 s (hot) 82 s (cold)


    Output : 10 HP (7.5 kW) Temperature rise : 80 K
    Poles :4 Duty cycle : S1
    Frequency : 60 Hz Ambient temperature : -20 °C to +40 °C
    Rated voltage : 220/380/440 V Altitude : 16400 ft
    Rated current : 26.0/15.1/13.0 A Protection degree : IPW65
    L. R. Amperes : 166/96.6/83.2 A Cooling method : IC411 - TEFC
    LRC : 6.4 Code H Mounting : F-1
    No load current : 10.9/6.31/5.45 A Rotation¹ : Both
    Rated speed : 1770 rpm Noise level² : 64.0 dB(A)
    Slip : 1.67 % Vibration class :A
    Rated torque : 29.3 ft.lb Starting method : Direct On Line
    Locked rotor torque : 240 % Coupling : Direct
    Pull up torque : 200 % Approx. weight³ : 262 lb
    Breakdown torque : 260 % Painting plan : 203A
    Insulation class :F Color : RAL 5009
    Service factor : 1.25 Design :B
    Moment of inertia (J) : 2.62 sq.ft.lb
    Output 50% 75% 100% Load type : Variable torque
    Efficiency (%) 88.1 90.4 91.7 Load torque : 29.4 ft.lb
    Power Factor 0.67 0.78 0.82 Load inertia (J=GD²/4) : 1.51 sq.ft.lb
    Drive end Non drive end Foundation loads
    Bearing type 6309-C3 6209-C3 Max. traction :
    Lubrication interval 20000 h 20000 h Max. compression :
    Lubricant amount 13 g 9g
    ____ Lubricant type MOBIL POLYREX EM

    Notes

    Specification : MG1 - Part 10 Vibration : MG1 - Part 7


    Standards

    Test : MG1 - Part 12 Tolerance : MG1 - Part 12


    Noise : MG1 - Part 9
    This revision replaces and cancel the previous one, which These are average values based on tests with sinusoidal
    must be eliminated. power supply, subject to the tolerances stipulated in NEMA
    (1) Looking the motor from the shaft end. MG 1-12.
    (2) Measured at 1m and with tolerance of +3dB(A).
    (3) Approximate weight, subject to be changed after
    manufacturing process.
    Rev. Changes Summary Rev. Checked Date

    Performed by e-piero
    Checked by Page Rev.
    Date 21/11/2023 1/1 0
    This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.

    You might also like