SUPERIOR RELIABILITY

3,000 – 6,500 LB. CAPACITY

INTERNAL COMBUSTION
CUSHION TIRE LIFT TRUCK
 TRIED-AND-TRUE
2

PERFORMANCE
 3

A Truck You Can Depend On

The Cat® 3,000-6,500 lb. LP gas cushion tire series offers what businesses demand: fuel economy,
reliable performance and greater operator control. Built for dependability, these forklifts can
operate in a wide range of indoor applications to move goods, stage pallets or transfer loads.
KEY INDUSTRIES:
• General Warehousing • Lumber And Wood
• Building Materials • Stone, Clay And Glass
• Fabricated Metal • Industrial Equipment
• Primary Metal • Chemicals And Allied Products

EXCELLENT HORSEPOWER AND TORQUE

The GK21 (53 hp / 2C3000-2CC4000) and GK25 (61 hp / 2C4000-2C6500)
engines – both proven performers – are well known for reliability when working
in demanding applications. Both engines deliver high performance with
excellent fuel efficiency and meet all CARB and EPA emissions regulations.
 FRONT TO BACK
4

DURABILITY
A Truck With Solid Dependability
Constructed with a heavy-duty mast that features narrow channels and six load rollers, this
forklift takes durability to the next level.

SURROUNDED BY STRENGTH

Load Rollers Inching Pedal

• Added strength via six load rollers used to • Simultaneously applies and disengages
support the forward and backward loading the brake
of the carriage • Provides slow, controlled acceleration and
• Greater contact, increased stability and precise maneuvering in tight locations
extended life of the mast through the use
of specially-shaped mast channels and
large mast rollers

Drive Axle Mast Channels

• One-piece, single-cast drive axle • Enhanced operator visibility through
• Reduces potential leak points, absorbs narrow flanges
the shock from the wheels and reduces • Added mast strength from deep
stress on the chassis web design
• Increased load capacity due to
larger rollers canted three
degrees with full-face
contact
5
 GIVING YOU TOTAL
6

CONTROL
Performance tailored
to your operation

Performance Service
Fuel Saver Mode Engine Protection System
Controlled by a toggle switch on the dash, Provides greater uptime and lower repair
this feature helps reduce overall fuel costs by notifying your operator when vital
consumption and the risk of premature tire fluids are low or engine maintenance is
wear. The result: up to 14% more fuel required.
efficiency without affecting the top speed
of the truck.*  aintenance Tools
M
With up to 500-hour service intervals,
Adjustable Speed Control on-board diagnostics, display-based
Limits top speed in applications that indicators and easy access to service
require improved security of loads, components, you can count on maximizing
congested areas or where pedestrian uptime and lowering maintenance costs.
traffic may be prevalent.

*Fuel efficiency increase shown against previous

model in preliminary testing. Levels may vary based
on application.
 7

Maneuverability

Hydrostatic Steering – This feature provides precise

movement with less effort. The hydrostatic steering is coupled with
a tilt steering column and memory function.

Hydraulic Levers – These are ergonomically-designed to

fit the operator’s hand and posture, while providing the accuracy
needed for precise maneuvering.

Optional Fingertip Controls – These controls are

mounted to the armrest and allow the operator to easily
manipulate the hydraulic system from a comfortable position.
8

Local service and support Genuine OEM parts Custom financing packages

MORE
CONFIDENCE
 9

Factory warranty for added protection

Local Support
You Can Count On
A Cat lift truck purchase connects you to a variety
of material handling solutions, including world-
class service and support from your local, trusted
dealer. With trained service technicians, a diverse
parts inventory and a broad selection of service
options, your local dealer can help you lower costs,
enhance productivity and more efficiently manage
your business.

FINANCING MADE SIMPLE

Financing your next Cat lift truck is easy with our wide range
of flexible leasing and purchasing options. Whether you want
to finance or lease, your local Cat lift truck dealer can help
customize a package for your business.

WHEN EVERY PART COUNTS

When buying from your local Cat lift truck dealer, you can rest
assured that your genuine OEM parts are manufactured to
meet original equipment criteria. Additionally, all Cat lift trucks
OEM parts come with a six-month, unlimited-hours warranty.

When speed is critical, our Parts Fast Or Parts Free

Guarantee* ensures next-business-day delivery of all Cat lift
trucks parts, or they’re free, including freight. If your part
doesn’t come in by the next business day, we pay for it.

STANDING BEHIND OUR PRODUCTS

We deliver peace of mind by helping your lift trucks stay
on the job. Every new Cat lift truck is covered by a 1-year /
2,000-hours warranty that includes parts and labor, as well
as components and systems. With our standard 2-year /
4,000-hours extended powertrain warranty, you’ll have the
confidence that only comes from owning a Cat lift truck.

* At dealer’s location.
† Programs may be subject to change without notice and may vary by region.
Please ask your local Cat lift truck dealer for complete terms and conditions.
10

Specifications
Characteristics 2C3000 2C3500
1 Capacity – at rated load center lb kg 3,000 1,500 3,500 1,750
2 Capacity – at load center-distance in mm 24 500 24 500
3 Power LP Gas LP Gas
4 Tire type – cushion or pneumatic Cushion Cushion
5 Wheels (x = driven) – number front / rear 2x / 2 2x / 2
Dimensions 2C3000 2C3500
11 Lift with standard two-stage mast – maximum fork height (top of forks) in mm 131.0 3,325 131.0 3,325
12 Lift with standard two-stage mast – free fork height in mm 4.5 115 4.5 115
Forks – length x width x thickness in mm 42 x 3.9 x 1.4 1,070 x 100 x 35 42 x 3.9 x 1.4 1,070 x 100 x 35
13
Fork spacing – out-to-out minimum / maximum in mm 7.9 / 32.3 200 / 820 7.9 / 32.3 200 / 820
14 Tilt – forward / backward deg 5° / 10° 5° / 10°
15 Length to fork face in mm 81.9 2,080 83.3 2,115
Width – with standard tires in mm 38.2 970 38.2 970
16
Width – with standard tires, wide-stance in mm 39.3 997 39.3 997
Width – with standard tires, wide-axle in mm N/A N/A
17 Height – mast lowered in mm 83.0 2,105 83.0 2,105
18 Height – seat height in mm 43.1 1,096 43.1 1,096
19 Height – top of overhead guard in mm 80.9 2,055 80.9 2,055
20 Height – mast extended in mm 179.5 4,550 179.5 4,550
21 Minimum outside turning radius in mm 69.9 1,775 71.3 1,810
22 Load moment constant in mm 15.3 388 15.3 388
23 Minimum aisle - 90° stack - zero clearance w/out load 1 in mm 85.2 2,163 86.5 2,198
Performance 2C3000 2C3500
40 Travel speed loaded / empty mph km/h 9.6 / 10.3 15.5 / 16.5 9.6 / 10.3 15.5 / 16.5
41 Lift speed loaded / empty fpm mm/s 122 / 124 620 / 630 122 / 124 620 / 630
42 Lowering speed loaded / empty fpm mm/s 98.4 / 98.4 500 / 500 98.4 / 98.4 500 / 500
Drawbar pull – loaded at 1 mph (1.6 kph) lb N 3,750 16,700 3,750 16,700
43
Drawbar pull – loaded maximum lb N 4,270 19,000 4,270 19,000
Gradeability – loaded at 1 mph (1.6 kph) % 45 40
44
Gradeability – maximum loaded % 53 47
Weight 2C3000 2C3500
50 Empty lb kg 6,040 2,740 6,420 2,910
Axle load – without load front / rear lb kg 2,350 / 3,720 1,070 / 1,690 2,230 / 4,230 1,010 / 1,920
51
Axle load – with load front lb kg 7,870 3,570 8,670 3,930
Chassis 2C3000 2C3500
60 Tire size – front, standard in 18 x 6 x 12.125 18 x 6 x 12.125
61 Tire size – rear in 14 x 5 x 10 14 x 5 x 10
62 Wheelbase in mm 46.9 1,190 46.9 1,190
Tread width – front, standard tires in mm 32.2 818 32.2 818
63
Tread width – front, wide-stance tires in mm 33.3 845 33.3 845
64 Tread width – rear, standard tires in mm 32.3 820 32.3 820
65 Ground clearance – at lowest point of mast in mm 3.0 75 3.0 75
66 Ground clearance – at center of wheelbase in mm 4.6 116 4.6 116
67 Service brakes type Foot, Hydraulic Foot, Hydraulic
68 Parking brakes type Hand, Mechanical Hand, Mechanical
Powertrain 2C3000 2C3500
80 Engine model GK21E GK21E
HP kW 50 37.4 50 37.4
81 Continuous output (S.A.E. gross)
at rpm 2,400 2,400
lb-ft Nm 111 151 111 151
82 Maximum torque (S.A.E. gross)
at rpm 2,000 2,000
83 Cylinder / displacement cu in L 4 / 126 4 / 2.1 4 / 126 4 / 2.1
84 Transmission type Powershift Powershift
85 Number of speeds forward / reverse 1/1 1/1
Battery volts 12 12
Hydraulics 2C3000 2C3500
86 Relief pressure – For attachments at auxiliary valve psi bar 2,630 181 2,630 181
88 Hydraulic flow – For attachments at auxiliary valve gpm L/min 19.0 72.0 19.0 72.0
 2CC4000 2C4000 2C5000
1 lb kg 4,000 2,000 4,000 2,000 5,000 2,500
2 in mm 24 500 24 500 24 500
3 LP Gas LP Gas LP Gas
4 Cushion Cushion Cushion
5 2x / 2 2x / 2 2x / 2
2CC4000 2C4000 2C5000
11 in mm 131 3,330 131.5 3,340 131.5 3,340
12 in mm 4.7 120 5.1 130 5.1 130
in mm 42 x 3.9 x 1.6 1,070 x 100 x 40 42 x 3.9 x 1.6 1,070 x 100 x 40 42 x 3.9 x 1.6 1,070 x 100 x 40
13
in mm 7.9 / 32.3 200 / 820 7.9 / 36.2 200 / 920 7.9 / 36.2 200 / 920
14 deg 5° / 10° 5° / 9° 5° / 9°
15 in mm 85.6 2,175 90.2 2,290 92.5 2,350
in mm 40.2 1,021 41.9 1,064 41.9 1,064
16
in mm N/A 44.4 1,128 44.4 1,128
in mm N/A N/A N/A
17 in mm 83.5 2,105 83.0 2,110 83.0 2,110
18 in mm 43.1 1,096 43.3 1,100 43.3 1,100
19 in mm 80.9 2,055 81.5 2,070 81.5 2,070
20 in mm 179.5 4,550 180 4,570 180 4,570
21 in mm 72.8 1,850 77.4 1,965 79.5 2,020
22 in mm 15.9 404 16.3 414 16.3 414
23 in mm 88.7 2,254 93.7 2,379 95.8 2,434
2CC4000 2C4000 2C5000
40 mph km/h 9.6 / 10.3 15.5 / 16.5 10.9 / 11.2 17.5 / 18.0 10.9 / 11.2 17.5 / 18.0
41 fpm mm/s 122 / 124 620 / 630 126 / 130 640 / 660 126 / 130 640 / 660
42 fpm mm/s 98.4 / 98.4 500 / 500 98.4 / 98.4 500 / 500 98.4/ 98.4 500 / 500
lb N 3,660 16,300 4,650 20,700 4,610 20,500
43
lb N 4,160 18,500 5,190 23,100 5,170 23,000
% 36.0 45 37
44
% 42.0 51 43
2CC4000 2C4000 2C5000
50 lb kg 6,980 3,170 7,310 3,320 8,110 3,680
lb kg 2,040 / 4,890 930 / 2,220 3,050 / 4,290 1,380 / 1,950 2,800 / 5,340 1,270 / 2,420
51
lb kg 9,440 4,280 9,990 4,530 11,470 5,200
2CC4000 2C4000 2C5000
60 in 18 x 7 x 12.125 21 x 7 x 15 21 x 7 x 15
61 in 14 x 5 x 10 16 x 6 x 10.5 16 x 6 x 10.5
62 in mm 46.9 1,190 55.1 1,400 55.1 1,400
in mm 33.2 843 34.9 886 34.9 886
63
in mm N/A 37.4 950 37.4 950
64 in mm 32.3 820 35 890 35 890
65 in mm 3.0 75 3.1 80 3.1 80
66 in mm 4.6 116 5.5 139 5.5 139
67 type Foot, Hydraulic Foot, Hydraulic Foot, Hydraulic
68 type Hand, Mechanical Hand, Mechanical Hand, Mechanical
2CC4000 2C4000 2C5000
80 GK21E GK25E GK25E
HP kW 50 37.4 63 46.9 63 46.9
81
at rpm 2,400 2,700 2,700
lb-ft Nm 111 151 139 188 139 188
82
at rpm 2,000 1,600 1,600
83 cu in L 4 / 126 4 / 2.1 4 / 152 4 / 2.5 4 / 152 4 / 2.5
84 Powershift Powershift Powershift
85 1/1 1/1 1/1
volts 12 12 12
2CC4000 2C4000 2C5000
86 psi bar 2,630 181 2,630 181 2,630 181
88 gpm L/min 19.0 72.0 23.5 89.1 23.5 89.1

NOTE: These specifications assume the use of drive axles, tires and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the
shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1.) Also be advised that overall operating visibility may
be affected by the mast configuration and mast options of your truck. Therefore, you may need to add ancillary [auxiliary] devices or modify your operating practices. Consult your dealer for
further information.
 Characteristics 2C5500 2C6000
1 Capacity – at rated load center lb kg 5,500 2,800 6,000 3,000
2 Capacity – at load center-distance in mm 24 500 24 500
3 Power LP Gas LP Gas
4 Tire type – cushion or pneumatic Cushion Cushion
5 Wheels (x = driven) – number front / rear 2x / 2 2x / 2
Dimensions 2C5500 2C6000
11 Lift with standard two-stage mast – maximum fork height (top of forks) in mm 130.5 3,315 130.5 3,315
12 Lift with standard two-stage mast – free fork height in mm 5.3 135 5.3 135
Forks – length x width x thickness in mm 42 x 4.9 x 1.8 1,070 x 125 x 45 42 x 4.9 x 1.8 1,070 x 125 x 45
13
Fork spacing – out-to-out minimum / maximum in mm 7.9 / 37.8 200 / 960 7.9 / 37.8 200 / 960
14 Tilt – forward / backward deg 5° / 6° 5° / 6°
15 Length to fork face in mm 95.1 2,415 96.5 2,450
Width – with standard tires in mm 43.9 1,115 43.9 1,115
16
Width – with standard tires, wide-stance in mm 45.5 1,155 45.5 1,155
Width – with standard tires, wide-axle in mm N/A N/A
17 Height – mast lowered in mm 83.0 2,110 83.0 2,110
18 Height – seat height in mm 43.3 1,100 43.3 1,100
19 Height – top of overhead guard in mm 81.5 2,070 81.5 2,070
20 Height – mast extended in mm 179 4,540 179 4,540
21 Minimum outside turning radius in mm 81.3 2,065 82.5 2,095
22 Load moment constant in mm 17.2 436 17.2 436
23 Minimum aisle - 90° stack - zero clearance w/out load 1 in mm 98.5 2,501 99.6 2,531
Performance 2C5500 2C6000
40 Travel speed loaded / empty mph km/h 10.3 / 10.6 16.5 / 17.0 10.3 / 10.6 16.5 / 17.0
41 Lift speed loaded / empty fpm mm/s 104 / 106 530 / 540 104 / 106 530 / 540
42 Lowering speed loaded / empty fpm mm/s 98.4 / 98.4 500 / 500 98.4 / 98.4 500 / 500
Drawbar pull – loaded at 1 mph (1.6 kph) lb N 4,860 21,600 4,830 21,500
43
Drawbar pull – loaded maximum lb N 5,510 24,500 5,490 24,400
Gradeability – loaded at 1 mph (1.6 kph) % 36 33
44
Gradeability – maximum loaded % 41 38
Weight 2C5500 2C6000
50 Empty lb kg 9,010 4,090 9,440 4,280
Axle load – without load front / rear lb kg 3,010 / 5,990 1,370 / 2,720 2,820 / 6,580 1,280 / 2,980
51
Axle load – with load front lb kg 12,640 5,730 13,320 6,040
Chassis 2C5500 2C6000
60 Tire size – front, standard in 21 x 8 x 15 21 x 8 x 15
61 Tire size – rear in 16 x 6 x 10.5 16 x 6 x 10.5
62 Wheelbase in mm 55.1 1,400 55.1 1,400
Tread width – front, standard tires in mm 35.9 912 35.9 912
63
Tread width – front, wide-stance tires in mm 37.5 952 37.5 952
64 Tread width – rear, standard tires in mm 35 890 35 890
65 Ground clearance – at lowest point of mast in mm 3.1 80 3.1 80
66 Ground clearance – at center of wheelbase in mm 5.5 139 5.5 139
67 Service brakes type Foot, Hydraulic Foot, Hydraulic
68 Parking brakes type Hand, Mechanical Hand, Mechanical
Powertrain 2C5500 2C6000
80 Engine model GK25E GK25E
HP kW 63 46.9 63 46.9
81 Continuous output (S.A.E. gross)
at rpm 2,700 2,700
lb-ft Nm 139 188 139 188
82 Maximum torque (S.A.E. gross)
at rpm 1,600 1,600
83 Cylinder / displacement cu in L 4 / 152 4 / 2.5 4 / 152 4 / 2.5
84 Transmission type Powershift Powershift
85 Number of speeds forward / reverse 1/1 1/1
Battery volts 12 12
Hydraulics 2C5500 2C6000
86 Relief pressure – For attachments at auxiliary valve psi bar 2,630 181 2,630 181
88 Hydraulic flow – For attachments at auxiliary valve gpm L/min 23.5 89.1 23.5 89.1
 12
Call-out numbers shown in the diagram correspond
to the first column of the specifications chart.
2C6500 14
1 lb kg 6,500 3,300
2 in mm 24 500
3 LP Gas
4 Cushion
5 2x / 2
2C6500
11 in mm 131.0 3,345
20
12 in mm 5.5 140
in mm 42 x 4.9 x 1.8 1,070 x 125 x 45
13
in mm 7.9 / 37.8 200 / 960
14 deg 5° / 6°
15 in mm 97.6 2,480 11
in mm 43.9 1,115
16
in mm 45.5 1,155
17 2
in mm N/A 19
17 in mm 88.0 2,230 18
18 in mm 43.3 1,100
19 in mm 81.5 2,070
20 in mm 181 4,570 12
21 in mm 83.7 2,125 66
22 in mm 17.4 441 65
13
23 in mm 101 2,566
22 62
2C6500
15
40 mph km/h 10.3 / 10.6 16.5 / 17.0
41 fpm mm/s 104 / 106 530 / 540
42 fpm mm/s 98.4 / 98.4 500 / 500
lb N 4,830 21,500
43
lb N 5,460 24,300 13 63 16
% 31 13
44
% 35
2C6500
50 lb kg 9,880 4480 21
lb kg 2,680 / 7,200 1,220 / 3,260
51
lb kg 14,010 6,350
2C6500 13 23
60 in 21 x 8 x 15
61 in 16 x 6 x 10.5
62 in mm 55.1 1,400 Safety Standards
in mm 35.9 912
63
in mm 37.5 952 These trucks meet American National Standards Institute/Industrial
64 in mm 35 890 Truck Standards Development Foundation, ANSI/ITSDF B56.1.
65 in mm 3.1 80
66 in mm 5.5 139 UL-Classified by Underwriters Laboratories, Inc., as to fire and
67 type Foot, Hydraulic electric shock hazard only. Availability: Types G, LP and D standard.
68 type Hand, Mechanical Types GS, LPS and DS optional. Users should be aware of, and
2C6500 adhere to, applicable codes and regulations regarding operator
80 GK25E training, use, operation, and maintenance of powered industrial
HP kW 63 46.9 trucks, including:
81
at rpm 2,700
lb-ft Nm 139 188 • ANSI/ITSDF B56.1.
82 • NFPA 505, fire safety standard for powered industrial trucks —
at rpm 1,600
83 cu in L 4 / 152 4 / 2.5 type designations, areas of use, maintenance and operation.
84 Powershift • Occupational Safety and Health Administration (OSHA)
85 1/1 regulations that may apply.
volts 12
Contact your Cat lift truck dealer for further information, including
2C6500
operator training programs and auxiliary visual and audible warning
86 psi bar 2,630 181
systems, fire extinguishers, etc., as available for specific user
88 gpm L/min 23.5 89.1
applications and requirements. Specifications, equipment, technical
data, photos and illustrations based on information at time of
printing and subject to change without notice. Some products may
be shown with optional equipment.
 2C3000-2C65000
14

OPTIONS
A Custom Fit
OPTIONS FOR PRODUCTIVITY, COMFORT AND MORE:

Application Packages
Cotton / Fiber Foundry / Brick
Protection Package Protection Package
This protection package provides a Ideal for demanding applications • Transmission oil filter
high-speed fan and radiator screen like block and brick fabrication: • Dual element air filter
to keep the system clean from • Dust-proof front axle • Tilt cylinder boots
dust and debris. • Hydraulic tank breathers • Dashboard indicators
• Elevated air intake / pre-cleaner
 15

Ergonomics
Swivel Seat Rear Grab Bar Light And Strobe Packages
This option, which makes entering and With Horn Button For darker environments or for applications
exiting the truck easier, is great for short This option is ideal for short shuttle with higher traffic, these optional light
shuttles. applications and those with a significant packages help improve operator visibility and
amount of reverse travel. visibility of the forklift.

Contact your local dealer to learn more about the different options available for this series.
Your Cat lift truck dealer can provide additional options and features to specialize
your lift truck for your unique application. Operator training and custom financing
programs are also available to help find the right fit for your business.

Helping move businesses forward – that’s how we’re built.

1-800-CAT-LIFT | www.mcfa.com/cat
© 2018 MCFA. All Rights Reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. All registered trademarks
are the property of their respective owners.

Some products may be shown with optional equipment.

CECT0201 04/18