HB961 Counter/Raster Table（Double set of six shows）

◆ input singal：switch、pluse（Low pluse：-30V~+0.6V；

High pluse：+4V ~ +30V）
◆ External sensors: photoelectric tube, near the switches, Coun
ter/ R
aster
Form
Hall sensors, angle, line grating displacement sensor, encoder
◆ Outside the instrument to the sensor for the 5V, 24V
DC voltage and DC current 30mA
◆ To meet the different needs of which we can set
d ifferent ratio A, ratio b, the initial value of C and the decimal dot
◆ The current total value, set the count to alarm values, set parameter values count-down
function is not lost
◆ A variety of relay output to meet the requirements of the scene control
Includes addition and subtraction counting, counting to identify the phase (raster form)
model of a total of two counts , customers use when configured in strict accordance with
specification ;
一、Technical specifications 1.2 count mode number table

Number Count mode Counter mode map and description

IN1 input for the count,

IN2 to control client.
When the input is
IN1
Modified high/low (or IN2-side
000001 Counter
IN2 3 3 COM disconnect/connect
(High-speed) 1
2 2
1
2
Display 0 with the public) when,
IN1 to receive signals,
and additional/reduce
counts.

In this mode,IN1 and

IN2 are input count.Wh-
Modified I N 1 en the client receives si-
000002 Counter I N 2 gnals IN1, plus count.
(Low-speed) 2
3
2 2
3
Display0 1 1
IN2 client when receiv-

二、Panel description ing the signal, reducing

the count.

Counter/Raster Form In this mode, if the

Meaurement value/par- A sensor then IN1 signal,
888888 ameter setting sign IN2 then the B sensor
signal; A reception when
J1 indicator J1 J2 Up key/reset key the IN1 signal ahead of
J2 indicator IN1 the B signal IN2 to rece-
Raster
000003 table ive a 90-degree counter
Set key Shift key/decrease nu- IN2
3 when the count increa-
merals 1
2 2
1
Display 0 0 ses; the other hand if the
三、Parameters settings description B-receiving IN2 signal IN1
ahead of the A signal re-
1.Set count mode ceiver 90, the counter c-
ounts by.
1.1 Setting method(Log in by inputting passwo rd“PP 0089 "
after pressing SET )
Measurement status
Press SET Press Press SET
XXXXXX pp0000 pp0089 p-sn
Input PP0089

Press Press SET Press SET

end p-sn XXXXXX SET

SET and
 2.1 Detail of function parameter PV
J2 J2 count after the relay to pull-in, counter to stop coun-

Symbol Description Range Default C ting; relay J2-t after delayed release counter reset.
J2-t
value Time
R1SN r 1sn J1 Output mode 1 09
1、2、3
R2SN r 2sn J2 Output mode 1～11 1 PV PV
J2
J2
A A Ratio -199999～999999 1 C C
J2-t J2-t
Time 时间
b B Ratio 1～999999 1 10 11
c C Initial value -199999～999999 0 Count after the relay to pull-J2, J2 count after the relay to pull-in, cou-

dot Last one counters continue to count, the relay nter to stop counting. J2-t delay relay released
Dot Decimal point position ...... (not show)
time delay after the release of J2-t.
end End End
3.Alarm parameters settings guide（Log in by inpu-
2.2 Functional parameters of the process of instrument
tting password"0001" after press SET )
settings
Working status Input password Symbol J1 output mode
3.1 Detail of alarm parameter
Press Press Press SET Press SET
XXXXXX SET
pp0000 SET
pp0036 r1sn XXXXXX Sy mbo l Des cr ipt ion Ra ng e Default value
Press J2 output mode J1 J1 Rel ay J1 al ar m val ue 1 -19 99 99～99 99 99 20000
Press SET
r2sn XXXXXX j1-2 J1-2 Rel ay J1 al ar m val ue 2 -19 99 99～99 99 99 10000
Press j2 J2 Rel ay J2 al ar m val ue 1 -19 99 99～99 99 99 40000
Press SET
end j2-2 J2-2 Rel ay J2 al ar m val ue 2 -19 99 99～99 99 99 30000
j2-t J2-t Rel ay J2 del ay time 0.1～99 99 9. 9 0.1
Remark:
end End End
1 )Input password and parameter by using and
2)Achieve a rapid choice of parameters by using and 3.2 Parameters in the functional group, when the relay
Note 1、Relay J1 output mode ( r1sn )：1、2、3
output rxsn determined, the parameters will be autom-
atically generated alarm group (J1, J1-2, J2, J2-2, J2-t)
PV PV
J1
J1 3.3 Alarm parameter setting process and features the
C C
same process parameter settings
Time Time
02
01
Count after the relay to Count after the relay to drop out, 四、Treminal configuration and connecting d-
counters continue to count.
pull-J1, counters continue to count.
rawing(Should be based on the physical map of
PV
J1-2
the show, whichever is)
J1 Count after the relay to pull-J1, J1-2 count after the re-
lease of the relay. If J1 = J1-2, the relay does not move; J1> 1.Terminal
C
J1-2, while they were admitted to the anti-relay action. 24V 5V 30mA COM COM COM COM RST IN2 IN1
Time
03

Note 2、Relay J2 output mode ( r1sn )：1～11 1 2 3 4 5 6 7 8 9 10

PV PV
J2 J2

C C

Time
Time 11 12 13 14 15 16 17 18 19 20
01 02 - +
Count after the relay to Count after the relay to drop out, AC/DC J2 J1
pull-J1, counters continue to count. counters continue to count. 85-260V

PV
J2 J1-2
2. Matching the various sensor wiring
Count after the relay to pull-J1, J1-2 count after the re-
lease of the relay. If J1 = J1-2, the relay does not move; J1> COM 24 or 5V
C J1-2, while they were admitted to the anti-relay action.

03
Time c COM

PV
PV IN IN
J2
J2 Comtact signal Proximity Switches
C
C
Time N ote 1: if a strong interference at the scene or take over the
Time
05
04 inductive load can be input 220V AC power and re -
Count after the relay to Count after the relay to
pull-J1, counters stop to count. drop out, counters stop to count.
lay, respectively, and then use the client's safety r -
PV egulations 250V/220nF capacitance.
J2-2 Count after the relay to pull-J1, J1-2 count after the re-
Note 2:The instrument at the factory only with the second
lease of the relay.,at the same time ,reset relay.If J1 = J1-2,
C the relay does not move; J1> J1-2, while they were admitted type of sensor (NPN type) with access (if Other req -
Time to the anti-relay action. uirements, please apply for customization), if the
06
PV PV user is using PNP sensors, while the use of When the
J2 J2
C C
need for indirect IN and COM a suitable value res -
J2-t J2-t
Time Time istor (recommended 510Ω).
07 08
Count after the relay to pull-J1, J2 count after the relay to pull-in,
counters continue to count；J2-t delay reset counter; relay delay after the rel-
relay after the release of counter reset. ease of J2-t.