Ec3401 Set2
Ec3401 Set2
Ec3401 Set2
(Regulations 2021)
1. Write a program and execute the error detection techniques using c language
2. Write the windowing technique program and execute the without data loss.
3. Write and execute to one-bit stuffing method is used frame the binary value in data link layer
5. Create a scenario and analyze the performance of the network with CSMA/CD protocol and
CSMA/CA protocol
6. Write the program and execute for sender to receiver packet size is 5 and data transmitted in
every 3rd packet is lost during transmission using Stop and wait protocol method
7. Perform Data transfer between two nodes using Go back n sliding window protocol under
following conditions.
10 Write a program to encrypt the message "Have a nice day". Also show the message obtained
after decrypting the cipher text
Page 1 of 2
11 Implement the sliding window protocol -Go back-N.
13 Write and implement a C program for implementing error detection and error correction
14 Implement Sliding Window Protocol - Go Back-N ARQ for the packet length 10 and 100 bytes
with time out range of 1.5,10 seconds .Conclude the reliability of the protocol from the obtained
results
16 Perform data Communication between nodes in the given network using Distance Vector
Routing Algorithm.
17. Develop an algorithm to implement RSA encryption and decryption of your registration number
along with ECE R 2021 message.
19. Verify and demonstrate the Ring, Bus and Star Topology with suitable scenarios
20. Write a Program and Excite for LRC error detection Techniques
Page 2 of 2