H5A MULTISENSOR CAMERA

9 MP 12 MP 15 MP 20 MP 24 MP 32 MP

The Avigilon H5A Multisensor camera helps ensure your site is covered from all angles by combining Next-Generation Video
Analytics and three or four adjustable sensors into one powerful solution. Monitor virtually any area in all lighting conditions
with up to 360-degree views from a single camera. This makes the H5A Multisensor perfect for securing wide areas,
including outdoor building corners, parking lots, crossroads, as well as indoor areas with high ceilings, long corridors and
hallway intersections.

FEATURES
NEXT-GENERATION VIDEO ANALYTICS VARIFOCAL LENSES
Detects more objects with expanded object classifications Enables you to customize the field of view to optimally protect
and greater accuracy for faster responses, even in crowded your site, while lens distortion correction provides a seamless
scenes. viewing experience.

IMPACT, WATER, DUST & CORROSION FIPS 140-2 COMPLIANT WITH INTEGRATED TPM
PROTECTION Meets the high data security standards required by federal
Protects against impact, water, windblown dust and a government agencies and heavily regulated enterprises with
degree of corrosion with IK10, IP66/67, NEMA Type 4X and FIPS-compliant cryptography support, integrated TPM and Secure
TS2 ratings. Boot.

ONVIF® COMPLIANT HIGH-QUALITY IMAGES IN ALL LIGHTING

ONVIF Profile S and T compliance enables easy integration Sees clearly in the most challenging lighting conditions with faster
with existing ONVIF infrastructures. Profile G compliance frame rates, improved Wide Dynamic Range and optional IR
supports search, playback and retrieval of recordings on the illumination.
edge, while Profile M allows for cross-functionality with
third-party analytic solutions.
ONVIF is a trademark of Onvif, Inc.
SPECIFICATIONS
IMAGE PERFORMANCE 3.0 MP 5.0 MP 4K (8.0 MP)
Image Sensor 1/2.8” CMOS 1/2.8" CMOS
1920 (H) x 1080 (V) (16:9) 2560 x 1440 (16:9) 3840 x 2160 (16:9)
Active Pixels
2048 (H) x 1536 (V) (4:3) 2592 x 1944 (4:3) 2880 x 2160 (4:3)
3 x Image Sensor, Max Resolution 5760 (H) x 1080 (V) (16:9) 7680 x 1440 (16:9) 11520 x 2160 (16:9)
(per image sensor) 6144 (H) x 1536 (V) (4:3) 7776 x 1944 (4:3) 8640 x 2160 (4:3)

4 x Image Sensor, Max Resolution 7680 (H) x 1080 (V) (16:9) 10240 x 1440 (16:9) 15360 x 2160 (16:9)
(per image sensor) 8192 (H) x 1536 (V) (4:3) 10368 x 1944 (4:3) 11520 x 2160 (4:3)

Sensor Aspect Ratio 4:3 4:3 16:9

IR Illumination - Optional
(high power 850 nm LEDs)1 30 m (98 ft) maximum distance at 0 lux when camera is mounted at 4 m (13 ft) off the ground

0.020 lux (F1.5) in color mode 0.020 lux (F1.5) in color mode
Minimum Illumination 0.018 lux (F1.5) in mono mode 0.016 lux (F1.5) in mono mode
0 lux with optional IR illuminator 0 lux with optional IR illuminator

WDR On 120 dB, true WDR, dual exposure

Dynamic Range
WDR Off 80 dB
3D Noise Reduction Filter Yes
Image Rate-Analytics Enabled on All
Sensors2:
3 x Image Sensor (60 Hz, 50 Hz) 30 / 25 fps 30 / 25 fps 24 / 20 fps
4 x Image Sensor (60 Hz, 50 Hz) 30 / 25 fps 24 / 25 fps 17 / 16 fps
Image Rate-High Framerate Mode3:
3 x Image Sensor (60 Hz, 50 Hz) 60 / 50 fps 40 / 33 fps 24 / 25 fps
4 x Image Sensor (60 Hz, 50 Hz) 40 / 33 fps 30 / 25 fps 20 / 20 fps
1 The IR intensity is based on supplied PoE power.
2 Full Feature Mode: Analytics and WDR enabled with H.265.
3 High Frame Rate Mode: Analytics disabled with H.265. Max frame rate with WDR enabled is 30 fps.

IMAGE CONTROL
Image Compression Method H.264 HDSM SmartCodec, H.265 HDSM SmartCodec, Motion JPEG
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Motion Detection Selectable sensitivity and threshold
Electronic Shutter Control Automatic, Manual (1/7.5 to 1/8000 sec)
Iris Control Fixed
Day/Night Control Automatic, Manual
Flicker Control 60 Hz, 50 Hz
White Balance Automatic, Manual
Backlight Compensation Adjustable
Privacy Zones Up to 64 zones

LENS (PER IMAGE SENSOR) 3.0 MP 5.0 MP 4K (8.0 MP)

Lens and Horizontal Field of View Based 53° - 97° (16:9) 58° - 106° (16:9)
on Aspect Ratio 53° - 99° (4:3) 43° - 74° (4:3)

Lens and Vertical Field of View Based on 29° - 50° (16:9) 32° - 55° (16:9)
Aspect Ratio 39° - 69° (4:3) 32° - 55° (4:3)

Aperture Range F1.5 - F1.9

Control Fixed Iris, Remote Focus and Zoom

[email protected] | avigilon.com 2
 NETWORK
Network Gigabit Ethernet, 100BASE-TX, 1000BASE-TX
Cabling Type CAT5E
Connector RJ-45
API ONVIF® compliance Profile S, T, M, and G (www.onvif.org)
Signed and encrypted firmware, password protection, HTTPS encryption, digest authentication, WS authentication, user
Security
access log, 802.1x port based authentication, TLS1.3, FIPS140-2 Level 3 via onboard TPM
Secure Boot Yes
Protocol IPv4, IPv6, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv2, ICMP, DHCP, Zeroconf, ARP, HSTS
Streaming Protocols RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP
Device Management Protocols SNMP v2c, SNMP v3

PERIPHERALS
USB Port USB 2.0
Dual MicroSD/microSDHC/microSDXC slot - video speed class card required. Class V10 or better recommended. The dual
Onboard Storage
SD cards will work as one contiguous region of storage.

AUXILIARY I/O
Audio Compression Method G.711 PCM 8 kHz, Opus
Audio Input/Output Line level input and output
External I/O Terminal Alarm In, Alarm Out

ELECTRICAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

With IR: With IR:
52 W with 24 VDC 52 W with 24 VDC
74 VA with 24 VAC 74 VA with 24 VAC
26 W with 24 VDC 51 W with high power PoE (PoE++) 51 W with high power PoE (PoE++)
Power Consumption 37 VA with 24 VAC
25.5 W with IEE 802.3at Type 2 (PoE+) Without IR: Without IR:
26 W with 24 VDC 26 W with 24 VDC
37 VA with 24 VAC 37 VA with 24 VAC
25.5 W with IEEE 802.3at Type 2 (PoE+) 25.5 W with IEEE 802.3at Type 2 (PoE+)

External Power 24 VDC ± 10 %; 24 VAC rms ± 10 %, 50 or 60 Hz

With IR: 60 W (PoE++): IEEE 802.3bt Type 3, Cisco® UPoE or legacy high-power
PoE* 30 W IEEE 802.3at Type 2 (PoE+) PoE*
Up to 35% IR Power or without IR: 30 W IEEE 802.3at Type 2 (PoE+)
Redundant Power Seamless failover between PoE and Aux and back without interruption in camera operation
* Supported high power PoE products are listed in the Optional Injectors and Switches Section and may require adjusting the PoE mode switch. Contact sales or technical support for
more information.

MECHANICAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

Overall:
298 mm x 161 mm With wall arm: 385 mm x 262 mm x 299
(11.75" x 6.33") mm (15.15" x 10.30" x 11.77")
304 mm x 114 mm
Dimension
(11.95" x 4.48")
Below mounting surface: With NPT adapter: 299 mm x 248 mm
298 mm x 64 mm (11.77" x 9.76")
(11.75" x 2.52")
Wall Mount: 1190 g (2.6 lbs)
Mount: 950 g (2.1 lbs) NPT Adapter Mount: 470 g (1.04 lbs)
Mount: 1100 g (2.4 lbs) Bezel: 1250 g (2.8 lbs) Pendant: 1680 g (3.7 lbs)
Bezel: 490 g (1.1 lbs) Camera Module (4 lenses): 1590 g (3.5 Bezel: 1250 g (2.8 lbs)
Weight Camera Module (4 lenses): 1590 g (3.5
Camera Module (4 lenses): 1590 g (3.5 lbs)
lbs) Optional IR Illuminator Ring: 670 g (1.5 lbs)
lbs) Optional IR Illuminator Ring: 670 g (1.5
lbs)

[email protected] | avigilon.com 3
MECHANICAL IN-CEILING SURFACE MOUNT PENDANT MOUNT
Body Aluminum, Plastic dome trim Aluminum Aluminum
Plastic, Injection Molded, Pantone Cast, Anodized and Powder Coated, Cast, Anodized and Powder Coated,
Finish
427C Pantone 427C Pantone 427C

Optional IR Illuminator Ring Not available Optional accessory, 30 m (98 ft) IR range

ENVIRONMENTAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

Operating Temperature -10 °C to +50 °C (14 °F to 122 °F) -40 °C to +60 °C (-40 °F to 140 °F)
Storage Temperature -30 °C to +70 °C (-22 °F to 158 °F)
Humidity 0 - 95% non-condensing
The IR illuminator will operate at 100% power from -40 °C to 44 °C (-40 °F to 111
°F). The IR power will reduce to 60% from 44 °C to 53 °C (111 °F to 127 °F). The IR
illuminator will turn off when the temperature is greater than 53 °C (127 °F).
IR Illumination Behavior Not available Hysteresis: 6 °C (10.8 °F).

For 25.5 W PoE+, the IR illuminator will operate at only 35% power and will turn
off if the temperature is below -26 °C (-15 °F).

PER SENSOR
Tilt +7° to 96° from horizon
Pan +/-120° (depending on position of image sensors)
Azimuth +/-180°

CERTIFICATIONS IN-CEILING SURFACE MOUNT PENDANT MOUNT

Certifications/Approvals UL, cUL, CE, ROHS, RCM, BIS, UKCA, NOM, KC
UL 62368-1, CSA 62368-1, IEC/EN 62368-1
Safety Standards
UL 2043 (Plenum) IEC/EN 62471
IEC 60529 IP66, IP67 rating
IEC/EN 62262 Impact (IK 10)
Environmental Standards/Ratings IEC 60529 IP5X rating (dust only) IEC/EN 60068-2-6 Product Vibration
IEC/EN 60068-2-27 Product Shock
Type 4X
FCC Part 15 Subpart B (Class A)
ICES-003 (Class A)
Electromagnetic Emissions Standards EN 55032 (Class A)
EN 61000-3-2
EN 61000-3-3
EN 55035
EN 61000-6-1
Electromagnetic Immunity Standards
EN 50121-4
EN 50130-4
NEMA TS2 Not applicable NEMA TS2 paragraph 2.2.7 - 2.2.9

SUPPORTED ANALYTICS EVENTS

Objects in Area The event is triggered when the selected object type moves into the region of interest.
Object Loitering The event is triggered when the selected object type stays within the region of interest for an extended amount of time.
The event is triggered when the specified number of objects have crossed the directional beam that is configured over
Objects Crossing Beam
the camera’s field of view. The beam can be unidirectional or bidirectional.
Object Appears or Enters Area The event is triggered by each object that enters the region of interest. This event can be used to count objects.
Object Not Present in Area The event is triggered when no objects are present in the region of interest.
Objects Enter Area The event is triggered when the specified number of objects have entered the region of interest.
Objects Leave Area The event is triggered when the specified number of objects have left the region of interest.
Object Stops in Area The event is triggered when an object in a region of interest stops moving for the specified threshold time.
Object Too Close The event is triggered when an object moves to within a certain threshold distance of another object.

[email protected] | avigilon.com 4
SUPPORTED ANALYTICS EVENTS
Direction Violated The event is triggered when an object moves in the prohibited direction of travel.

Tamper Detection The event is triggered when the scene unexpectedly changes.

SUPPORTED CLASSIFIED OBJECT TYPES

Object Types in Outdoor Mode Person and Vehicle, sub-types: Car, Truck, Bicycle, Motorcycle, Bus
Object Types in Indoor Mode Person

TEACH BY EXAMPLE
Object Types Teach By Example in
Yes, when used with Avigilon Control Center™.
Outdoor Mode

OUTLINE DIMENSIONS [X.X] INCHES

X MM
PENDANT WALL MOUNT

PENDANT NTP MOUNT

SURFACE MOUNT

[email protected] | avigilon.com 5
IN-CEILING MOUNT

WALL MOUNT

METAL CEILING PANEL

[email protected] | avigilon.com 6
ORDERING INFORMATION
The variety of mounting options for the H5A Multisensor provides maximum flexibility. All the available camera modules can
be used in any of the mounting options.
MOUNTING SCENARIO ORDERING INFORMATION
Order one of:
l
Camera module
l
H5AMH-AD-PEND1
PENDANT WALL MOUNT
l
H5AMH-DO-COVR1 or H5AMH-DO-COVR1-SMOKE
l
WLMT-1001
l
Optional, H4AMH-AD-IRIL1
Order one of:
l
Camera module
l
H5AMH-AD-PEND1
PENDANT NPT MOUNT
l
H5AMH-DO-COVR1 or H5AMH-DO-COVR1-SMOKE
l
NPTA-1001
l
Optional, H4AMH-AD-IRIL1
Order one of:
l
Camera module
SURFACE MOUNT l
H5AMH-AD-DOME1
l
H5AMH-DO-COVR1 or H5AMH-DO-COVR1-SMOKE
l
Optional, H4AMH-AD-IRIL1
Order one of:
l
Camera module
IN-CEILING MOUNT l
H4AMH-AD-CEIL1
l
H5AMH-DC-COVR1 or H5AMH-DC-COVR1-SMOKE
l
Optional, CLPNL-1001 if ceiling panel is needed

CAMERA MODULES
With the modular design of the H5A Multisensor, any camera module can be paired with any mounting adapter for
maximum versatility and optimal installation. Each camera module must be ordered with a matching mounting adapter and
dome cover.
DISPLAY PART NUMBER DESCRIPTION
9C-H5A-3MH 3X3MP, WDR, 270 degree max field of view, Lightcatcher, 3.3-5.7MM, Camera Only
12C-H5A-4MH 4X3MP, WDR, 360 degree max field of view, Lightcatcher, 3.3-5.7MM, Camera Only
15C-H5A-3MH 3X5MP, WDR, 270 degree max field of view, Lightcatcher, 3.3-5.7MM, Camera Only
20C-H5A-4MH 4X5MP, WDR, 360 degree max field of view, Lightcatcher, 3.3-5.7MM, Camera Only
24C-H5A-3MH 3X8MP, WDR, 270 degree max field of view, Lightcatcher, 3.3-5.7MM, Camera Only
32C-H5A-4MH 4X8MP, WDR, 360 degree max field of view, Lightcatcher, 3.3-5.7MM, Camera Only

[email protected] | avigilon.com 7
MOUNTING ADAPTERS AND DOME COVERS
The H5A Multisensor modular design provides pendant, surface, or in-ceiling mounting adapters and a choice of two dome
covers compatible with all the H5A Multisensor camera modules.
DISPLAY PART NUMBER DESCRIPTION
H5AMH-AD-DOME1 Outdoor surface mount adapter, must order either a H5AMH-DO-COVR1 or H5AMH-DO-COVR1-SMOKE.
Outdoor pendant mount adapter, must order one of WLMT-1001 or NPTA-1001 and one of H5AMH-DO-COVR1 or H5AMH-
H5AMH-AD-PEND1
DO-COVR1-SMOKE.
H5AMH-AD-CEIL1 In-ceiling adapter, must order either a H5AMH-DC-COVR1 or H5AMH-DC-COVR1-SMOKE.
H5AMH-DO-COVR1 Dome bubble and cover, for outdoor surface mount or pendant mount, clear.
Dome bubble and cover, for outdoor surface mount or pendant mount, smoked. Not recommended for low light
H5AMH-DO-COVR1-SMOKE
applications.
H5AMH-DC-COVR1 Dome bubble and cover, for in-ceiling mount, clear.
H5AMH-DC-COVR1-SMOKE Dome bubble and cover, for in-ceiling mount, smoked. Not recommended for low light applications.
WLMT-1001 Pendant wall arm adapter, for use with H5AMH-AD-PEND1.
NPTA-1001 Pendant NPT adapter for use with H5AMH-AD-PEND1.
PLMT-1001 Aluminum pole mounting bracket, compatible with WLMT-1001.
CRNMT-1001 Aluminum corner mounting bracket, compatible with WLMT-1001.
CPNL-1001 Metal ceiling panel.

OPTIONAL IR ILLUMINATOR
The optional IR Illuminator is available for the H5A Multisensor when mounted in a pendant or surface mount adapter.
DISPLAY PART NUMBER DESCRIPTION
H4AMH-AD-IRIL1 Optional IR illuminator ring, for use with H5AMH-DO-COVR1.

OPTIONAL INJECTORS
DISPLAY PART NUMBER DESCRIPTION
PD-9001 GR/AT/AC-*-MSI Indoor single port PoE+ 30W injector. Injector operational temperature range -20 °C to +40 °C (-4 °F to 104 °F).
POE60U-1BTE Gigabit 802.3bt 60 W PoE Injector, single port.

OPTIONAL ACCESSORIES
DISPLAY PART NUMBER DESCRIPTION
USB-AC56-NA-MSI / USB-AC56-EU-MSI USB Wi-Fi adapter.
CBLKT-1001 Cable kit replacement for Multi Head cameras.
CAM-FIPS Camera license to enable FIPS cryptographic mode on the H5A Multisensor or any H5A camera.

[email protected] | avigilon.com 8
SUPPORT
Learn more and find additional documentation at avigilon.com or email [email protected] for specific product support.

Apr 2023 | Rev 1

© 2023, Motorola Solutions, Inc. All rights reserved. MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER, ACC, HDSM SmartCodec and LIGHTCATCHER are trademarks of
Avigilon Corporation. The absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of the related trademark. All other
trademarks are the property of their respective owners.
[email protected] | avigilon.com 9