Abaqus

SolidWorks Associative Interface

User’s Guide
 SolidWorks Associative Interface

User’s Guide

Last updated June 2013

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 Legal Notices
This User’s Guide was prepared by Dassault Systèmes Simulia Corp. and is intended to provide additional assistance to the SolidWorks Associative
Interface, which is a product of Elysium, Inc., 2150 Hawthorne Blvd., Suite 770, Torrance, California 90503.
CAUTION: This documentation is intended for qualified users who will exercise sound engineering judgment and expertise in the use of the Abaqus
Software. The Abaqus Software is inherently complex, and the examples and procedures in this documentation are not intended to be exhaustive or to apply
to any particular situation. Users are cautioned to satisfy themselves as to the accuracy and results of their analyses.
Dassault Systèmes and its subsidiaries, including Dassault Systèmes Simulia Corp., shall not be responsible for the accuracy or usefulness of any analysis
performed using the Abaqus Software or the procedures, examples, or explanations in this documentation. Dassault Systèmes and its subsidiaries shall not
be responsible for the consequences of any errors or omissions that may appear in this documentation.
The Abaqus Software is available only under license from Dassault Systèmes or its subsidiary and may be used or reproduced only in accordance with the
terms of such license. This documentation is subject to the terms and conditions of either the software license agreement signed by the parties, or, absent
such an agreement, the then current software license agreement to which the documentation relates.
This documentation and the software described in this documentation are subject to change without prior notice.
No part of this documentation may be reproduced or distributed in any form without prior written permission of Dassault Systèmes or its subsidiary.
The Abaqus Software is a product of Dassault Systèmes Simulia Corp., Providence, RI, USA.
© Dassault Systèmes, 2013
Abaqus, the 3DS logo, SIMULIA, SolidWorks, and Unified FEA are trademarks or registered trademarks of Dassault Systèmes or its subsidiaries in the
United States and/or other countries.
Other company, product, and service names may be trademarks or service marks of their respective owners. For additional information concerning
trademarks, copyrights, and licenses, see the Legal Notices in the Installation and Licensing Guide for the release of Abaqus that you are using.

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 OVERVIEW

1. SolidWorks Associative Interface: overview

1.1 About this manual

This manual provides information for end-users on how to use the SolidWorks Associative Interface to
transfer models from SolidWorks to Abaqus/CAE. The manual also includes information about installing
the components of the SolidWorks Associative Interface.

1.2 About the SolidWorks Associative Interface

The SolidWorks Associative Interface allows you to transfer the geometry of a SolidWorks model to
Abaqus/CAE. The SolidWorks Associative Interface consists of the following two components:
• The SolidWorks Associative Interface add-in. The add-in is a plug-in for SolidWorks that allows
you to save a model in SolidWorks as an assembly (.eaf) file. The SolidWorks Associative
Interface add-in can be downloaded from “How to obtain the SolidWorks Associative Interface
installation files, user guide, and status reports” in the Dassault Systèmes Knowledge Base at
www.3ds.com/support/knowledge-base.
• The Abaqus/CAE CAD Connection toolset. The CAD Connection toolset, which is enabled with
a SolidWorks Associative Interface license, allows you to import an assembly file that is generated
by the SolidWorks Associative Interface add-in. The SolidWorks Associative Interface license is
available as an add-on product from your local SIMULIA office.

1.3 What is associative import?

Associative import allows you to easily transfer a part or assembly from SolidWorks to Abaqus/CAE; you
can subsequently modify the model in SolidWorks and propagate these modifications to Abaqus/CAE
without losing any analysis features assigned to the model in Abaqus/CAE. The SolidWorks Associative
Interface is useful when you are iterating on the design of a model in SolidWorks based on the results of
analyses conducted in Abaqus. Figure 1–1 shows the connection between SolidWorks and Abaqus/CAE
using associative import.
When you use associative import to transfer a model from SolidWorks to Abaqus/CAE, the model
appears in the current Abaqus/CAE viewport. The parts and assembly from SolidWorks are stored in
the Abaqus/CAE model database and appear in the Model Tree. You can use SolidWorks to modify the
parts or to change the position of components in the assembly; when the modifications are complete and
the model is ready to be analyzed, perform another associative import. Every time you import the model
into Abaqus/CAE, Abaqus/CAE updates the current viewport and the Model Tree to reflect the changes.
In addition, associative import retains any features that you added to the model with Abaqus/CAE.
Any of the features that you created in Abaqus/CAE—such as partitions, loads, boundary conditions,

1–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
OVERVIEW

SolidWorks Abaqus/CAE

Figure 1–1 Using associative import to export a model from SolidWorks (left) to Abaqus/CAE (right).

sets, and surfaces—are regenerated each time you import the modified model from SolidWorks to
Abaqus/CAE. For example, if you partitioned a cell with Abaqus/CAE, the partition is regenerated each
time you import the model from SolidWorks into Abaqus/CAE. However, the regeneration of features
may fail if the changes that you made with SolidWorks change the topology of the model in ways that
fail to fully support the creation of those features.
When you import an assembly, Abaqus/CAE creates parts that correspond to the imported part
instances and maintains the relationship between the parts and their instances. Abaqus/CAE does not
support subassemblies; if the SolidWorks model includes subassemblies, Abaqus/CAE imports the
complete model as a single assembly. In addition, features defined at the assembly level in SolidWorks
(such as merges or splits) are not imported into the Abaqus/CAE model.
In most cases Abaqus/CAE retains the names of the parts from the SolidWorks model.

1.4 Using the SolidWorks Associative Interface

The SolidWorks Associative Interface offers two associative import methods: automatic associative
import and manual associative import.

1–2

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 OVERVIEW

Automatic associative import

Automatic associative import transfers the geometry of a SolidWorks model to Abaqus/CAE in
a single step. Sessions of SolidWorks and Abaqus/CAE must be running simultaneously on the
same computer. Using the CAD Connection toolset, you establish a link between Abaqus/CAE and
SolidWorks. As soon as an assembly file is created by the SolidWorks Associative Interface add-in,
the assembly is imported automatically into Abaqus/CAE. After the model has been transferred,
you can continue to make design modifications in SolidWorks and propagate these modifications
to the Abaqus/CAE model with a single mouse click. For detailed instructions on performing an
automatic associative import, see “Using automatic associative import,” Section 5.1.

Manual associative import

Manual associative import is a multistep procedure that can be used to perform an associative
import when SolidWorks and Abaqus/CAE are running on different computers or on different
platforms. Using the SolidWorks Associative Interface add-in, you can save an assembly (.eaf)
file to a specified location. Using the CAD Connection toolset, you can import the geometry
into Abaqus/CAE or use the assembly file to update an existing model in Abaqus/CAE at a later
time. For detailed instructions on performing a manual associative import, see “Using manual
associative import,” Section 5.2.

1–3

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 SYSTEM REQUIREMENTS

2. System requirements for the SolidWorks Associative

Interface
The components of the SolidWorks Associative Interface are supported on the platforms indicated in
Table 2–1.

Table 2–1 Supported platforms for the SolidWorks Associative Interface.

SolidWorks Associative Abaqus/CAE CAD

Platform
Interface add-in Connection toolset
Windows/x86-64
Linux/x86-32*
Linux/x86-64*
*
The manual associative import method must be used when Abaqus/CAE is
running on a Linux platform.

Release 1.x of the SolidWorks Associative Interface add-in can be installed with all SolidWorks
releases beginning with SolidWorks 2008. For more information about installing the SolidWorks
Associative Interface add-in in SolidWorks, see Chapter 4, “Installing the SolidWorks Associative
Interface add-in.”
The CAD Connection toolset for Abaqus/CAE supports the SolidWorks Associative Interface in
Abaqus 6.8 or later.
For the latest information about which versions of SolidWorks and Abaqus/CAE are supported by
the SolidWorks Associative Interface, refer to the Support page at www.3ds.com/simulia.

2–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 UNITS

3. Units
SolidWorks allows you to change the displayed units of measure in a model; if you change the displayed
units, all measurements and parameters in the model are converted and updated to reflect the new
units. Abaqus/CAE has no units built into it. When you use associative import to transfer a model
from SolidWorks, Abaqus/CAE imports the displayed numerical measurements without regard for the
displayed units.
For example, consider a model created in SolidWorks of a cube that measures 30 millimeters on a
side (see Figure 3–1). If the displayed units system in SolidWorks is MMGS (millimeter, gram, second),
Abaqus/CAE imports a cube with a side length of 30. If the displayed units system in SolidWorks is
CGS (centimeter, gram, second), Abaqus/CAE imports a cube with a side length of 3.

Figure 3–1 Abaqus/CAE ignores the displayed units when importing models from SolidWorks.

The individual parts in an assembly should use the same units system. When you import an assembly
with mixed units into Abaqus/CAE, all of the parts are scaled to a consistent set of units before the import.
However, if you subsequently update the Abaqus/CAE assembly by importing an individual part, the
units for that part are not scaled and may be inconsistent with the existing dimensions in Abaqus/CAE.
Note: Some model assemblies that are imported using Release 1.1 of the SolidWorks Associative
Interface may employ inconsistent units when positioning the assembly components in Abaqus/CAE.

3–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
UNITS

To resolve this problem, rewrite the assembly (.eaf) file for the model from SolidWorks using
Release 1.2 or higher of the SolidWorks Associative Interface add-in, and import the new assembly file
into Abaqus/CAE.

3–2

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 INSTALLATION

4. Installing the SolidWorks Associative Interface add-in

The SolidWorks Associative Interface add-in is an plug-in component for SolidWorks. The add-in must
be enabled after it is installed.

4.1 Installing the SolidWorks Associative Interface add-in

The following procedure describes how to install the SolidWorks Associative Interface plug-in on
Windows systems. You need administrative privileges to install the plug-in. SolidWorks must be
installed and licensed on your system before installing the plug-in. If you are installing the SolidWorks
Associative Interface on an operating system that uses User Access Control (UAC), such as Windows
Vista or Windows 7, you must turn off UAC or select the least secure setting.

1. Download the appropriate SolidWorks Associative Interface zip file from “How to obtain the
SolidWorks Associative Interface installation files, user guide, and status reports” in the Dassault
Systèmes Knowledge Base at www.3ds.com/support/knowledge-base. Two zip files are available:
one for installation on Windows/x86-32 platforms and one for installation on Windows/x86-64
platforms.
2. Unzip the SolidWorks Associative Interface zip file and save the contents to a permanent directory;
the directory must be accessible to all users of the SolidWorks Associative Interface. The zip file
contains the add-in .dll file.
3. Start SolidWorks, and select File→Open from the main menu bar.
The Open dialog box appears.
4. In the Files of type field, select Add-Ins (*.dll).
5. Navigate to the directory that contains the add-in file. Select the add-in .dll file, and click Open.
SolidWorks installs the SolidWorks Associative Interface add-in.

4.2 Enabling the SolidWorks Associative Interface add-in

The following procedure describes how to enable the SolidWorks Associative Interface add-in in
SolidWorks after you have installed it:
1. From the SolidWorks main menu, select Tools→Add-Ins.
SolidWorks displays the Add-Ins dialog box.
2. In the Add-Ins dialog box, the SolidWorks Associative Interface add-in is listed as Abaqus/CAE
underneath the Other Add-ins heading (see Figure 4–1).

4–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
INSTALLATION

• To enable the SolidWorks Associative Interface add-in in the current SolidWorks session,
toggle on the check box in the Active Add-ins column.
• To enable the SolidWorks Associative Interface add-in for future SolidWorks sessions, toggle
on the check box in the Start Up column.

Figure 4–1 The Add-Ins dialog box.

3. Click OK.
If you toggled on Active Add-ins for the SolidWorks Associative Interface add-in, Abaqus

appears in the SolidWorks main menu bar, and the Export to Abaqus/CAE icon appears in
the SolidWorks toolbar.
4. To disable the SolidWorks Associative Interface add-in, follow the above steps and toggle off the
appropriate check boxes.

4.3 Determining the release number of the SolidWorks Associative

Interface add-in
Use the procedure below to determine which release of the SolidWorks Associative Interface add-in you
are using. This information may be necessary if you are contacting SIMULIA for troubleshooting issues
related to the SolidWorks Associative Interface.
1. From the SolidWorks main menu, select Abaqus→Export to Abaqus/CAE.
Export to Abaqus/CAE appears in the SolidWorks PropertyManager.
2. In the PropertyManager, click the question mark.
The dialog box that appears contains trademark information and the release number for the
SolidWorks Associative Interface add-in.

4–2

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 INSTALLATION

4.4 Uninstalling the SolidWorks Associative Interface add-in

To uninstall the SolidWorks Associative Interface add-in, run the following command from a command
prompt:

regsvr32 /c /u full_path_to_dll_file

where full_path_to_dll_file is the location of the saved add-in .dll file on your computer. The
SolidWorks Associative Interface add-in is disabled in SolidWorks, and the Abaqus/CAE item is
removed from the Add-Ins dialog box.

Note: On Windows Vista, User Account Control (UAC) must be turned off for the administrator account
and the user account before uninstalling the SolidWorks Associative Interface add-in.

4–3

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 USING THE SolidWorks Associative Interface

5. Using the SolidWorks Associative Interface to import a

part or assembly from SolidWorks to Abaqus/CAE
Associative import through the SolidWorks Associative Interface allows you to transfer model geometry
and subsequent design changes from SolidWorks to Abaqus/CAE without losing any analysis features
that are defined in Abaqus/CAE. Associative import can be performed automatically or manually; for an
overview of the two import techniques, see “Using the SolidWorks Associative Interface,” Section 1.4.

5.1 Using automatic associative import

Follow the instructions below to import an assembly from SolidWorks to Abaqus/CAE using automatic
associative import.
1. Start Abaqus/CAE, and enter the Assembly module.
2. From the main menu bar, select Tools→CAD Interfaces→SolidWorks.
3. From the SolidWorks dialog box that appears, choose Auto-assign port and click Enable.
Abaqus/CAE displays the port number that it assigned in the message area. (If desired, you can
click Specify port and enter the port number.)
4. Start SolidWorks, and load the model to be exported.
Abaqus appears in the SolidWorks main menu bar. If Abaqus does not appear in the main menu
bar, refer to Chapter 4, “Installing the SolidWorks Associative Interface add-in.”
5. If the model includes any new or modified parts, save the SolidWorks model. Current SolidWorks
part (.SLDPRT) files must exist for each part in the assembly before using the SolidWorks
Associative Interface.
6. Select Abaqus→Export to Abaqus/CAE from the SolidWorks main menu.
The Export to Abaqus/CAE options appear in the SolidWorks PropertyManager.
7. In the SolidWorks PropertyManager, specify the following information:
a. Toggle on Open in Abaqus/CAE (see Figure 5–1).
b. If necessary, change the default number in the Open in Abaqus/CAE field so that it matches
the port number displayed by Abaqus/CAE when you enabled the CAD interface.
c. The SolidWorks Associative Interface saves necessary files (the assembly file and part
geometry files) to a working directory during the import. If necessary, change the path in the
Working Directory field to save these files in a different location.
d. By default, the SolidWorks Associative Interface automatically saves the current version of the
SolidWorks model as part of the export process. To prevent the SolidWorks files from being

5–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
USING THE SolidWorks Associative Interface

Figure 5–1 Use automatic associative import to transfer the model directly to Abaqus/CAE.

saved automatically, toggle off Autosave files before export. If you toggle off this option,
you must manually save the SolidWorks model before exporting it to Abaqus/CAE.
8. Click the green check mark in the SolidWorks PropertyManager.
The model appears in the current Abaqus/CAE viewport. If an assembly is open in SolidWorks,
the parts are imported into Abaqus/CAE and an assembly of part instances is created automatically.
If a single part is open in SolidWorks, only the part is imported into Abaqus/CAE. You can use
the parts and the assembly in an Abaqus/CAE analysis; for example, you can apply sections to the
parts, and you can apply loads and boundary conditions to the assembly.

9. If you modify the model in SolidWorks, click the Export to Abaqus/CAE icon to update
the model in Abaqus/CAE. The modified model is imported immediately into Abaqus/CAE using
the settings previously specified in the Export to Abaqus/CAE dialog box. You can also select
Abaqus→Export to Abaqus/CAE from the SolidWorks main menu to change the settings and
import the updated model.
Note: If you toggled off the Autosave files before export in the Export to Abaqus/CAE dialog
box, you must manually save the modified SolidWorks model before exporting it to Abaqus/CAE.
Abaqus/CAE imports only the modified parts. Any changes that you make to the position of
components in the SolidWorks assembly will also be exported to Abaqus/CAE. Any components
that you suppress or unsuppress in SolidWorks are suppressed or resumed similarly in Abaqus/CAE.
If you hide a component in SolidWorks, the visibility of that part instance in Abaqus/CAE is turned
off; use the Assembly Display Options in Abaqus/CAE to control the visibility of part instances
(for more information, see “Controlling instance visibility,” Section 76.14 of the Abaqus/CAE
User’s Guide).

5–2

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 USING THE SolidWorks Associative Interface

Features (such as loads and sets) and geometric modifications that you created in Abaqus/CAE
are updated to account for the changes to the SolidWorks parts. Abaqus/CAE will be unable to
regenerate some features if the topology of the part has changed significantly.
10. From the Abaqus/CAE main menu bar, select Tools→CAD Interfaces→SolidWorks to show the
port number that is being used or to disable the connection with SolidWorks. For more information,
see “Creating a CAD connection,” Section 60.1 of the Abaqus/CAE User’s Guide.

5.2 Using manual associative import

Follow the instructions below to import an assembly from SolidWorks to Abaqus/CAE using manual
associative import.
1. Start SolidWorks, and load the model to be exported.
Abaqus appears in the SolidWorks main menu bar. If Abaqus does not appear in the main menu
bar, refer to Chapter 4, “Installing the SolidWorks Associative Interface add-in.”
2. If the model includes any new or modified parts, save the SolidWorks model. Current SolidWorks
part (.SLDPRT) files must exist for each part in the assembly before using the SolidWorks
Associative Interface.
3. Select Abaqus→Export to Abaqus/CAE from the SolidWorks main menu.
The Export to Abaqus/CAE options appear in the SolidWorks PropertyManager.
4. In the SolidWorks PropertyManager, specify the following information:
a. Toggle off Open in Abaqus/CAE (see Figure 5–2).

Figure 5–2 Use manual associative import to save an assembly file.

b. In the Working Directory field, specify a path and file name to which the assembly file will
be saved.

5–3

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
USING THE SolidWorks Associative Interface

c. By default, the SolidWorks Associative Interface automatically saves the current version of
the SolidWorks model before it creates the assembly file. To prevent the SolidWorks files from
being saved automatically, toggle off Autosave files before export. If you toggle off this
option, you must manually save the SolidWorks model before creating the assembly file.

5. Click the green check mark in the SolidWorks PropertyManager.

SolidWorks saves the assembly (.eaf) file and any necessary part files in ACIS (.sat) format.
You can now end your SolidWorks session.
6. If necessary, copy the assembly file and all of the ACIS part files to the computer where you will
be running Abaqus/CAE.
7. Start Abaqus/CAE, and select File→Import→Assembly from the main menu bar.
The Import Assembly dialog box appears.
8. From the File Filter menu at the bottom of the Import Assembly dialog box, select Assembly
File (*.eaf*).
9. Select the assembly file that was written in Step 5, and click OK.
10. From the Import Assembly from EAF File dialog box that appears, select the assembly or
individual part instances to import, and click OK.
The selected part instances appear in the current Abaqus/CAE viewport. You can use the parts and
the assembly in an Abaqus/CAE analysis; for example, you can apply sections to the parts, and you
can apply loads and boundary conditions to the assembly.
For more information about importing assembly files, see “Importing an assembly from an assembly
file,” Section 10.7.14 of the Abaqus/CAE User’s Guide.
11. If you modify the model in SolidWorks, use the following steps to propagate the changes to the
model in Abaqus/CAE:
a. Repeat Steps 1–5 to create an updated assembly file. The name of the assembly file can change
between imports; however, the names of the parts and components in the SolidWorks model
must remain the same.
b. If necessary, copy the assembly file and any ACIS part files that have been modified since the
last import to the computer where you are running Abaqus/CAE.
c. Open the existing model in the current viewport of Abaqus/CAE.
d. Import the updated assembly file using the procedure in Steps 7–10.
Abaqus/CAE imports only the modified parts. Any changes that you made to the position
of components in the SolidWorks assembly will also be imported to Abaqus/CAE. Any
components that you suppressed or unsuppressed in SolidWorks are suppressed or resumed
similarly in Abaqus/CAE. If you hid a component in SolidWorks, the visibility of that part
instance in Abaqus/CAE is turned off; use the Assembly Display Options in Abaqus/CAE

5–4

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 USING THE SolidWorks Associative Interface

to control the visibility of part instances (for more information, see “Controlling instance
visibility,” Section 76.14 of the Abaqus/CAE User’s Guide).
Features (such as loads and sets) and geometric modifications that you created in Abaqus/CAE
are updated to account for the changes to the SolidWorks parts. Abaqus/CAE will be unable
to regenerate some features if the topology of the part has changed significantly.

5–5

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 SolidWorks Associative Interface SCRIPTING INTERFACE

6. SolidWorks Associative Interface scripting interface

You can use the scripting interface for the SolidWorks Associative Interface to iterate on the design of
your model. For example, you can attempt to minimize the weight of your design by running a script
that decreases the thickness of a region until Abaqus calculates that a maximum stress level is reached.
The scripting interface for the SolidWorks Associative Interface utilizes the SolidWorks VBA macro
scripting interface to update the SolidWorks model in Abaqus/CAE and to save SolidWorks parts in
assembly (.eaf) file format. The scripting interface provides the following four methods:
SetPortNumber(port)
You use the SetPortNumber method to assign the port that will be used by the CAD Connection
toolset. port is a long integer specifying the port number.

SetWorkingDirectory(directory)
You use the SetWorkingDirectory method to specify where the SolidWorks Associative
Interface saves files (the part geometry files) during the import. directory is a string specifying the
path to the working directory.

SetAutoSave(save)
You use the SetAutoSave method to automatically save the current version of the SolidWorks
model in assembly (.eaf) file format as part of the export process. save is a long integer specifying
whether to save the current version of the SolidWorks model. If save=0, the model is not saved; if
save=1, the model is saved.

ExportToCAE(export)
You use the ExportToCAE method to update the model in Abaqus/CAE. export is a long integer
specifying whether to update the model. If export=0, the model is not updated; if auto=1, the model
is updated.

Before you run a SolidWorks Associative Interface script for the first time, you must do the
following:
1. Start SolidWorks, and select Tools→Macro→Edit from the main menu bar.
2. Open a file containing a script (.swp file).
3. From the main menu bar, select Tools→References.

6–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
SolidWorks Associative Interface SCRIPTING INTERFACE

4. Verify that the following libraries (.tlb file) are registered:

• Visual Basic For Applications
• SolidWorks Extensibility Type Library
• OLE Automation
• SolidWorks version Constant Type Library
• SwAddinTolAnalyst 1.0 Type Library
• Sw2AbqPlugin 1.0 Type Library
• SolidWorks version Commands Type Library
• SolidWorks version Exposed Type Libraries for add-in use
The following example illustrates the four methods that are provided in the SolidWorks Associative
Interface scripting interface. The example updates a SolidWorks part in Abaqus/CAE.

Dim mySAIPlugin As ISw2AbqPlugin

Set mySAIPlugin = swApp.GetAddInObject("Sw2AbqPlugin.Sw2AbqPlugin")
Dim port As Long
port = 45001
mySAIPlugin.SetPortNumber(port)
Dim workDir As String
workDir = "C:\wdir\SAI_TMP\"
mySAIPlugin.SetWorkingDirectory(workDir)
Dim auto As Long
auto = 1
mySAIPlugin.SetAutoSave(auto)
mySAIPlugin.ExportToCAE(auto)

6–2

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
 APPENDIX A: WHAT’S NEW?

Appendix A: What’s new?

This manual is intended for use with Release 1.7 of the SolidWorks Associative Interface add-in. To check
the release number of the add-in you are using, see “Determining the release number of the SolidWorks
Associative Interface add-in,” Section 4.3. The following new capabilities are available with these releases
of the add-in:
Support for SolidWorks 2012 and 2013
Release 1.7 of the SolidWorks Associative Interface supports only SolidWorks 2012 or later releases and
Abaqus/CAE 6.13-1 or later releases. For more information, see Chapter 2, “System requirements for
the SolidWorks Associative Interface.”

A–1

Abaqus ID:sai
Printed on: Wed July 17 -- 16:10:39 2013
About SIMULIA
Dassault Systèmes SIMULIA applications, including Abaqus, Isight, Tosca, and
Simulation Lifecycle Management, enable users to leverage physics-based
simulation and high-performance computing to explore real-world behavior of
products, nature, and life. As an integral part of Dassault Systèmes 3DEXPERIENCE
platform, SIMULIA applications accelerate the process of making highly informed,
mission-critical design and engineering decisions, before committing to costly and
time-consuming physical prototypes. www.3ds.com/simulia

About Dassault Systèmes

Dassault Systèmes, the 3DEXPERIENCE Company, provides business and people
with virtual universes to imagine sustainable innovations. Its world-leading solutions
transform the way products are designed, produced, and supported. Dassault
Systèmes’ collaborative solutions foster social innovation, expanding possibilities for
the virtual world to improve the real world. The group brings value to over 150,000
customers of all sizes, in all industries, in more than 80 countries. www.3ds.com

Abaqus, the 3DS logo, SIMULIA, CATIA, SolidWorks, DELMIA, ENOVIA, 3DVIA, Isight,
and Unified FEA are trademarks or registered trademarks of Dassault Systèmes or its
subsidiaries in the US and/or other countries. Other company, product, and service
names may be trademarks or service marks of their respective owners.

© Dassault Systèmes, 2013