Simple Support Matrix

RecoverPoint Classic
Version 4.4.x

REV 09
July 2018

The following tables provide product compatibility information for RecoverPoint Classic.

Note

This solution uses English language versions of the applications.

l RecoverPoint 4.4.x interoperability and system limits.............................................2

l RecoverPoint 4.4.x hardware..................................................................................3
l RecoverPoint 4.4.x application interoperability.......................................................4
l RecoverPoint 4.4.x interoperability with VMware................................................... 4
l Web browser support for VNX Unisphere............................................................... 5
l Web browser support for Unisphere for RecoverPoint........................................... 5
l vRPA configuration.................................................................................................6
Simple Support Matrix

RecoverPoint 4.4.x interoperability and system limits

Table 1 RecoverPoint 4.4.x interoperability and system limits

Dell EMC Supported Patch System limits

arrays a versions b
Array-specific limits General limits
™
VMAX 40K Dell EMC 5876.229.145 Number of: Number of:
™
Symmetrix 5876.159.102 l RP clusters connected to l RPAs per site = 8
VMAX 20K/VMAX ™
Enginuity 5876.251.161 splitter = 6 l CGs (including disabled) per
VMAX 10K (SN version 5876 5876.268.174 l GK devices = 8 per RPA RPA = 64; 128 in disaster. All
xxx987xxxx) 5876.269.175
should be able to transfer.
5876.272.177 Minimal number of:
VMAX 10K (SN l CGs (including disabled) per
5876.286.194 l GK devices = 2 per RPA
xxx959xxxx)/ Cluster= 128
5876.288.195
VMAXe 5876.309.401
l Distributed CGs = 8
l Replication sets = 8k
VMAXe Enginuity 5875 5875.267.201e l Maximum replication limit = 2
VPLEX
™
Dell EMC Number of: petabytes
GeoSynchrony l Maximum size of replicated
™ l RP clusters connected to
5.2, 5.3, volume = 32 TB
splitter = 6
5.4.1.x,5.5.1.x, l Number of volumes per cluster
5.5.2.x, 6.0.0.x l Number of splitters per RPA = 16k
and 6.0.1.x cluster = 10
l Replication sets = 8K
l DR1 Replication sets = 1.2K

XtremIO c
™
4.0.0-64, 4.0.1- Number of:
x, 4.0.2-x,
l Volumes per CG = 64
4.0.4-x, 4.0.10-
x, 4.0.15-x l Number of volumes +
snapshots per array = 8K
l Number of replicated
volumes per array & per RP
Cluster = 500
l RP clusters connected to
splitter = 4
l Number of replicated arrays
per cluster = 4
l Number of snapshots per CG
on target = 500

Unity Series Unity 300, 4.0.0.7329527 Number of:

Unity 400, or later
l RP clusters connected to
Unity 500,
splitter = 1
Unity 600,
Unity 300F, l Number of splitters per RPA
Unity 400F, cluster = 6
Unity 500F,
Unity 600F

2 RecoverPoint Classic 4.4.x Simple Support Matrix

 Table 1 RecoverPoint 4.4.x interoperability and system limits (continued)

Dell EMC Supported Patch System limits

arrays a versions b
Array-specific limits General limits
VNX-OE 33 de
™
Unified VNX 015 and later Number of: Number of:
Series RP clusters connected to RPAs per site = 8
VNX-OE 32 e 011 and later l l

splitter= 6 l CGs (including disabled) per

VNX-OE 31 008 and later l Number of splitters per RPA RPA = 64; 128 in disaster.
cluster = 10 Number of paths per RP
™
cluster= 200,000
Unified VNXe VNXe 3200 OE 4993502 and Number of: l All should be able to transfer.
Series v3.x MR 1.1 later
l RP clusters connected to l CGs (including disabled) per
splitter= 1 Cluster= 128
l Number of splitters per RPA l CGs (including disabled) per
cluster = 10 Cluster= 128
l Distributed CGs = 8
™
CLARiiON CX4 Dell EMC 526 and later Number of: l Replication sets = 8k
™
FLARE 30
l Attached LUNs = 2048 l Maximum replication limit = 2
petabytes
l RP clusters = 4
l Maximum size of replicated
Data Domain DDOS 5.7.x f l Two Data Domain systems
volume = 32 TB
per RecoverPoint cluster l Number of volumes per cluster
= 16k
l Data Domain as local copy l Number of paths per RP
only
cluster= 200,000
l Supports only XtremIO as
production
l Supports only GEN5 and
GEN6 RecoverPoint
Appliances (RPA)

a. RecoverPoint array-based splitters are supported with all operating systems that are supported by the corresponding arrays, as
documented in the Simple Support Matrix, as long as they are 512K block size.
b. When not using the latest version, please refer to any older versions of the RecoverPoint SSM posted on E-Lab Navigator for
limitations.
c. For XtremIO arrays running 4.0.2-x and above, the maximum number of volumes per CG =256.
d. VNX 5200/5400/5600/5800/7600/8000.
e. Snap-based replication limitation: Support with VNX Flare 32 Patch 05.32.000.5.215 and later. Support with VNX Flare 33
Patch 015 and later.
f. Data Domain 990, 4200 4550, and 7200.

RecoverPoint 4.4.x hardware

Table 2 RecoverPoint 4.4.x hardware

Hardware supported Hardware not supported

GEN-6 a GEN-1 or DELL 2950 phase-2

GEN-5 GEN-3 or DELL 2950

RecoverPoint 4.4.x hardware 3

Simple Support Matrix

Table 2 RecoverPoint 4.4.x hardware (continued)

Hardware supported Hardware not supported

GEN-4 Legacy hardware

a. The Gen 6 appliance is only supported from 4.4.1 and above.

RecoverPoint 4.4.x application interoperability

Table 3 RecoverPoint 4.4.x application interoperability

Application Version
CE - RP/CE Not supported

DM rel4.4.SP1.P1_h.155_DM_2.4.SP1.P2

KVSS Match the installed RP version

RecoverPoint 4.4.x interoperability with VMware

Table 4 RecoverPoint 4.4.x interoperability with VMware

ESX version SRMab SRA vSphere Supported

splitters
ESX 4.0c 5.1 2.1 5.1 All splitters
supported by
RecoverPoint
4.4.x

ESX/ESXi 4.1 c 5.1 2.1 5.1 All splitters

supported by
RecoverPoint
4.4.x

ESXi 5.0 c 5.1 2.1 5.1 All splitters

supported by
RecoverPoint
4.4.x

ESXi 5.1 c 5.1 2.1 / 2.2 / 5.1 All splitters

2.2.0.1d / supported by
2.2.0.3 d RecoverPoint
4.4.x

ESXi 5.5 c 5.5 2.1 / 2.2 / 5.5 All splitters

2.2.0.1 d / supported by
5.8
2.2.0.3 d RecoverPoint
4.4.x

ESXi 6.0 c 6.0e 2.2.0.3 6.0 All splitters

supported by
6.1e

4 RecoverPoint Classic 4.4.x Simple Support Matrix

 Table 4 RecoverPoint 4.4.x interoperability with VMware (continued)

ESX version SRMab SRA vSphere Supported

splitters
RecoverPoint
4.4.x

ESX 6.5 c 6.5e 2.2.0.3 6.5 All splitters

supported by
RecoverPoint
4.4.x

a. For more information regarding SRM supported versions, refer to the VMware Product
Interoperability Matrixes
b. PPVE multipath is recommended when working with SRM on VPLEX storage.
c. All released updates of VMware ESX/ESXi versions are supported unless specified by
another footnote. Contact the server vendor for the update level required for a specific
server.
d. When upgrading to SRA v2.2.0.1 and above, RPA security setting should be configured to
https mode. See the RecoverPoint Storage Replication Adapter for VMware vCenter Site
Recovery Manager Release Notes at support.emc.com for more details.
e. SRM 6.0/6.5 is supported only with SRA 2.2.0.3 and above.

Web browser support for VNX Unisphere

Table 5 Web browser support for VNX Unisphere

Web browser Unisphere 1.0 Unisphere 1.5

Google Chrome Supported Supported

Internet Explorer Supported Supported

Mozilla Firefox Supported Supported

Web browser support for Unisphere for RecoverPoint

Table 6 Web browser support for Unisphere for RecoverPoint

Web Browser Version Win Linux Mac

Internet Explorer 7 and later Supported Supported -

Google Chrome 2.0 and later Supported - -

Mozilla Firefox 4.0 and later Supported Supported -

Safari on MAC 5.0 and later - - Supported

Note

Minimum Flash version for Unisphere for RecoverPoint GUI is 10 and later.

Web browser support for VNX Unisphere 5

Simple Support Matrix

vRPA configuration
Table 7 vRPA configuration

Limits CPU Memory iSCSI Adapter

Minimum 2 CPUs 4 GB 1G

Maximum 8 CPUs 8 GB 10 G

Note

l Supported on ESX 5.0 and above.

l Only supported on VNX Inyo MR1 SP1 (iSCSI splitter support) and later.

6 RecoverPoint Classic 4.4.x Simple Support Matrix

Copyright © 2016-2018 Dell Inc. or its subsidiaries. All rights reserved.

Published July 2018

Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.“ DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH
RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED IN THIS PUBLICATION
REQUIRES AN APPLICABLE SOFTWARE LICENSE.

Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners.
Published in the USA.

vRPA configuration 7