Tinywow Networllab 48308914
Tinywow Networllab 48308914
Suppose you are hired has a network administrator in RR campus you have a setup
network laboratory BCA 5th semester prepare network design and specification for
computer (35) Network Printer (1) Router (1) Switch (24X2) and network
accessories.
Technical Specification for Desktop Computer, Printer, Router and Switch
Desktop Computer [units 35]
S.no Items Description Remark
1 Processor Intel Core i5 10 Generation
2 Core & GHZ 3.0 Ghz Minimum Required, 6Core
3 Cache Minimum 12MB L3
4 Chipset Intel H470
5 Memory 8GB (1x8GB) DDR4-2666 NECC
upgradable 64 GB DDR4 SDRAM
6 Hard Disk Minimum '1 TB HDD
7 Graphic Intel UHD Graphics
8 Ports 8 x USB Ports ( 4 x USB 3.0 SuperSpeed
USB 5Gbps, 2x USB 2.0,2xUSB 3.1
SuperSpeed USB 10Gbps );
Headphone/Microphone Combo
Printer [1 unit]
S.no Items Description Remark
1 Printing Technology Laser color
Router [ 1 unit]
S.no Items Description Remark
1 Router Wired
2 Routing speed Minimum 1 Gbps
3 LAN Ports Minimum 4 Gigabit Ethernet ports
4 Security Features Firewall, VPN Support
5 Wireless Capability Optional (if needed, ensure support for
WAP3 encryption)
6 Management Interface Web-based management interface
7 Network Protocols IPv4, IPv6
Switch [2 units]
S.no Items Description Remark
1 Type Managed Gigabit Ethernet Switches
2 Ports 24 ports per switch
3 PoE (power over Ethernet) Optional, depending on device
requirements
4 Switching Capacity 48 Gbps or higher
5 Management Web-based or CLI
6 VLAN Support Yes
7 QoS (Quality of Service) Supported
8 Rack Mountable Yes
9 Energy-Efficient IEEE 802.3az Compliant
Network Accessories
S.no Items Description Remark
1 Cabling Cat6 Ethernet cable
2 Patch Panels To organize and manage network
connections
3 Rack 19-inch server rack for mounting equipment
4 Power Backup Uninterruptible Power Supply (UPS) for
critical equipment
5 Cable management Cable trays and ties for neat cable
organization
6 Network Tools Crimping tools, Cable testers, etc.
2. Determine the appropriate placement of network devices on a network.
Device Function/Purpose Key Pints
Hub Connects devices on a twisted- A hub does not perform any tasks besides
pair network. signal regeneration.
Switch Connects devices on a twisted- A switch forwards data to its destination by
pair network. using the MAC address embedded in each
packet.
Bridge Divides networks to reduce A bridge allows or prevents data from passing
overall network traffic through it by reading the MAC address.
Router Connect networks together. A router uses the software-configured
network address to make forwarding
decisions.
Gateway Translates from one data Gateways can be hardware or software based.
format to another. Any device that translates data formats is
called a gateway
Network Card Enables systems to connect to Network interfaces c. expansion cards,
the network PCMCIA cards, or built-in interfaces an be
add-in
WAP Provides network capabilities A WAP is often used to connect to a wired
to wireless network devices. network, thereby acting as a link between
wired and wireless portions of the network.
Transceiver Coverts one media type to A device that functions as a transmitter and a
another, such as UTP to fiber. receiver of signals such as analog or digital.
Firewall Provides controlled data access Firewalls can be hardware or software based
between networks and are an essential part of a networks security
strategy.
3. Identify networking cable standards, create and test crossover and straight cables.
Straight Cables