0% found this document useful (0 votes)
27 views2 pages

2019

Control Systems sample question paper-2019

Uploaded by

SS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
27 views2 pages

2019

Control Systems sample question paper-2019

Uploaded by

SS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
CHRIST (DEEMED TO BE UNIVERSITY),BENGALURU - 560029 End Semester Examination March/April - 2019 Bachelor of Technology IV SEMESTER Code: EE434P Max.Marks: 100 Course: CONTROL SYSTEMS Duration: 3Hrs SECTIONA ing data justifiably. 5X20=100 1 Obtain force balance equations of ideal mass, ideal dash pot and ideal spring. Also write the analogous electrical elements in force voltage and force-current analogy for the elements of mechanical translational system. [OR] 2 The open loop transfer function of a system is G(s)H(s)=(1+4s)/s2(1+s)(1+2s). Determine the stability of closed loop system. If the closed loop system is not stable, then find the number of closed loop polesilying on the right half of s-plane 3 (a) Obtain the transfer function,6f the,system shown below(10] f SH 8 8 (b) Obtain the transfer function of field controlled DC motor with a block diagram [10] Assume mis [oR] 4 (a) Using block diagram reduction rules, obtain the transfer function of the system shown below|10] Ri) (b) Using Mason's gain formulae, obtain the transfer function of the signal flow graph shown below. [10] 5 Sketch the bode plot for the following transfer function and determine the system gain K for the gain cross over frequency to be 5radians/second.G(s)= Ks?/(1+0.2s) (1+0.02s). [OR] 6 Draw the bode plot for the open loop transfer function G(s) H(s)= 5(142s)/(1+4s) (140.25). 7 Explain in detail the realization of lag and lead compensators. [oR] 8 Explain in detail, time domain and frequency domain specifications. Also explain the advantage of frequency response analysis. 9 Obtain the state space model of the network shown below. R L + vt) c v(t) idt) for] 10 Find the controllability of the/ystem/represented by : x [: ‘E] ‘una

You might also like