Item of Works

10/31/23, 3:21 PM RFC Register
RFC Register
SerialNo Specification Unit Base Rate Qual Rate
1 Earthwork 0.00 0.00
SURFACE PREPARATION: Clearing of grass and unwanted weeds, clearing and

1.1 Sqm 123.00 135.28
cleaning all the rubbishes and preparing the site for execution.
Excavation in open area- Earth work excavation in ALL KIND OF SOIL at all
depths , for Leveling & Lowering ,Trimming the ground,for acheving the proposed
1.2 Cum 69.00 75.90
formation and transporting ,stacking the excavated earth at designated places
within the site ,as per the directions of the Engineer Incharge
Excavation in open area- Earth work excavation in HARD ROCK at all depths ,
for Leveling & Lowering ,Trimming the ground,for acheving the proposed
1.3 Cum 550.00 605.00
formation and transporting ,stacking the excavated earth at designated places
within the site ,as per the directions of the Engineer Incharge
Earthwork excavation for foundation of structures upto 3mts by Mechanical means
as per drawing and technical specification, including setting out, providing shoring
strutting and bracing removal of stumps and other deleterious matter, dressing of
1.4 Cum 81.00 89.10
sides and bottoms filling back the excavated earth to the extent required and
utilizing / transporting the remaining earth upto 1.00 km lead, including cost of
labour material and HOM etc., complete. a) All kindl of soil
Earthwork excavation for foundation of structures upto 3mts by Mechanical means
as per drawing and technical specification, including setting out, providing shoring
strutting and bracing removal of stumps and other deleterious matter, dressing of
1.5 Cum 550.00 605.00
sides and bottoms filling back the excavated earth to the extent required and
utilizing / transporting the remaining earth upto 1.00 km lead, including cost of
labour material and HOM etc., complete. a) Hard rock
BACKFILLING: Filling available excavated earth in foundations upto plinth in
layers not exceeding 300 mm in depth. Compacting each deposited layers by
1.6 Cum 115.58 127.13
ramming after watering to achieve 95% proctor density at optimum moisture
content
Construction of embankment with materials deposited from roadway cutting and
excavation from drain and foundation of other structures graded and compacted to
meet requirement of table 300-2 in layers not exceeding 250 mm loose thickness,
spreading, breaking clods removal of roots and other organic materials to the
required line, grade and cross section including watering, spreading by dozer,
1.7 grading by mortor grader and consolidation by vibratory road roller with desired Cum 85.88 94.46
field density not less than 95 % of maximum dry density within a lead of 100m
including all lead & lift , labour charges ,loading & unloading, cost of all
materials, hiring charges & transportation charge of all machineries, curing &
inclusive of all incidental charges Etc complete as per specifications & as directed
by Engineer-in-charge of work
2 Antitermite 0.00 0.00
ANTI TERMITE TREATMENT: Providing and injecting chemical emlsion for

Pre-constructional Anti- Termite Treatment, creating continous chemical barrier
under and around the column pits, walls, trenches, basement excavation, top
surface of plinth filling, junction of wall and floor along the external perimeter of
building, expantion joints, over the top surface of consolidated earth on which
2.1 Sqm 43.04 47.34
apron is to be laid, surrounding of pipes and conduits, with chloropyriphos
emulsifiable concentrates of 20% concetration equivalent, including cost of
chemical, diluting in water to one percent, labour, HOM of equiments, complete as
per Specification(Plinth area of the building at ground floor only shall be
Measured)
2.2 Antitermite New IOW Sqm 4.00 4.00
3 Cement concrete works 0.00 0.00
Providing and laying in position plain cement concrete of Mix 1:3:6 with OPC @
220kgs with 20mm and down size size graded granite metal coarse aggregate @
0.69cum and fine aggregate @ 0.56cum, machine mixed concrete laid in layers not
3.1 Cum 3,100.07 3,658.09
exceeding 15cm thick, well compacted in foundation plinth and cills, includingcost
of all materials, labours, HOM, curing complete as per specifications. specification
No KBS 4.1, 4.2
about:blank 1/9
Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @
240kgs with 20mm and down size size graded granite metal coarse aggregate @
0.878cum and fine aggregate @ 0.53cum, machine mixed concrete laid in layers
3.2 Cum 3,413.53 4,027.97
not exceeding 15cm thick, well compacted in foundation plinth and cills,
includingcost of all materials, labours, HOM, curing complete as per
specifications. specification No KBS 4.1, 4.2
Providing and laying in position Reinforced cement concrete for all Super
structures of building , Road works, Water works, Irrigation works & super
structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed
graded coarse aggregates and fine aggregates as per relevant IS Codes machine
mixed with super plasticisers laid in layers, well compacted using needle vibrators.
3.3 0.00 0.00
The cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing and
all other appurtenances required to complete the work as per technical
specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid
separately)
3.3.1 M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates Cum 3,926.85 4,633.68
3.3.5 M 40 Design Mix Using 20 mm nominal size graded crushed coarseaggregates Cum 4,649.02 5,485.85
4 Reinforcement 0.00 0.00
Providing TMT steel bar reinforcement conforming to IS-1786, Fe-500 grade

designation in Foundation/Substructure/Superstructure including straightening
bars, cutting, bending, hooking, binding with approved quality binding wire after
placing in position, tyeing, lapping and/or welding wherever required and
anchoring to the adjoining members wherever necessary as per drawing(laps,
4.1 MT 70,476.50 79,638.44
hooks and wastages shall not be measured and paid) including all lead & lift ,
labour charges ,loading & unloading, cost of all materials, hiring charges &
transportation charge of all machineries, curing & inclusive of all incidental
charges Etc complete as per specifications & as directed by Engineer-in-charge of
work including lead for steel
Fabrication supplying and erecting M.S. tubular trusses of all spans as per
approved drawing & design with prefabricated steel applications using quality
material and are durable, reliable and corrosion and abrasion resistant. Welding
shall confirm to latest structural welding code. Quality shall be on various
parameters like shape, size, design gauge and polish. The entire trusses is anchored
in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm
4.2 MT 97,087.50 97,087.50
thick base plate and shoe plate. The work includes cutting, straightening, placing
in position of M.S. pipes and welding wherever necessary and applying one coat of
redoxide primer coat to all the members including cost of all materials, labour
charges, and hire charges of machineries for cutting, welding, grinding and
erection equipments, with all lead and lift, transportation, letc., complete as per
specification
Painting with synthetic enamel paint of approved brand and manufacture to give
an even shade :Two coats on new work after thoroughly brooming the surface to
4.3 remove all dirt, dust, mortar drops and foreign matter including preparing the Sqm 182.00 182.00
surface even and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge.
5 Shuttering works 0.00 0.00
Providing and removing centering, shuttering, strutting, propping etc, and removal
5.1 of form work for foundations, footings, bases of columns for mass concrete Sqm 300.00 339.00
including cost of materials, labours complete as per specifications.
Providing and removing centering, shuttering, strutting, propping etc, and removal
of form work for vertical surfaces such as walls at any thickness, including
5.2 Sqm 300.00 339.00
attached pilasters, buttresses, plinth cills and string courses including cost of
materials, labours complete as per specifications.
6 Sub base works 0.00 0.00
about:blank 2/9
Construction of granular sub base Grading V as sub base and drainage layer by
providing coarse graded crushed stone aggregate of granite/trap/basalt material,
mixing in a mechanical mix plant at OMC, carriage of mixed material to work site,
6.1 Cum 1,687.43 1,873.05
spreading in uniform layers with motor grader on prepared surfaces and
compacting with vibratoty power roller to achieve th 98% proctor density,
complete as per specifications. Clause 401 of Morth V revision.
Providng, laying, spreading and compacting crushed stone aggregate of granite /
trap / basalt to wet mix mackdam specification including pre mixing the materaila
with water at OMC in mechanical mix plant carraige of mixed materials by tipper
6.2 Cum 1,852.43 2,056.20
to site, laying in uniform layers with paver in sub-base/base course on welll
prepared surface and compacting with vibratory roller to achive the desired density
complete as per specification. MORTH specification No 406.
7 FM2 class flooring 0.00 0.00
LDPE SHEET: Provinding & laying single layer of LDPE sheet of 200 microns
7.1 Sqm 34.00 37.40
thick approved quality on sub base of FM2 Class flooring(Vapour Barrier).
PLATE DOWELS: Providing and proper fixing of diamond plate dowels of 6 mm

7.2 Nos 104.00 114.40
thick (100 X 100) @ 450 mm c/c spacing
Non-metallic Floor Hardener: Providing & Spreading of Non Metallic Hard Top
dry shake floor hardener, based at a dosage of 4 kg per Sqm. complete with the
7.3 help of semi automatic mechanical spreaded. Make- BASF MasterTop100/Sika or Kg 14.50 15.95
equivalent.Note:Maximum Consumption not to exceed 4Kg/M2. Billing as per
actual site consumption.
Laying & Finishing Floor (Laser Screed Flooring): Leveling & compacting using
Large Line Laser Screed Machine S15R or S-158 C (From Somero USA) &
finishing concrete surface, smooth using Ride On trowels complete in large panel
size to floor tolerances of FM 2 as per TR 34 4th edition, carry out flatness by
7.4 Sqm 121.00 133.10
using Ride On trowels, bump-cutter and check rod etc. including all tools & other
equipment like, Beam screed, special form work, Timber Formwork with steel 'L'
angles, imported tools for flooring, complete workable RMC with slump of 140-
150 mm at site.
Surface Treatment - 5 Step Concrete Polishing: Densification & dust proofing of
concrete Flooring including cleaning & drying the base surface, applying with
Liquid Densifier "Sodium Silicate" (Make BASF MsterTop33/ Sika Cure Hard or
7.5 equivalent) Including 5 Step Polishing the surface with resin pads using Polishing Sqm 155.00 170.50
machines with Planetary motio , before handing over etc complete all as per
manufacturer's recommendations and as directed by the Engineer in charge.Work
should be executed by specialist flooring company.Note: Gloss-25 to 30GU
PLASTIC SHEET: Providing and laying of polythene sheet of 100 microns for
7.6 Sqm 9.50 10.45
curing of concrete floor surface for a minimum curing period of 10 Days.
Control & Construction Joints: Providing and filling grooves with PU (Shore A
Hardness 28 - 45) based sealant of BASF MasterFlex 474 / Sika/ Fosroc or
Equivalent in construction joints & controlled joints top 10 mm of section filled by
7.7 Rmt 106.00 116.60
sealant and below followed backer rod. The rate includes the cost of all ancillary
works as required, as per specifications and as recommended by manufacturer of 4
x 50 mm sectional control joint size & 4 X 15 mm Construction Joints
Isolation Joints-Wall: Providing & proper fixing of 10 mm thick compressible
board for isolation joints between slab and walls etc. and cutting , filling of top 10
7.8 Rmt 145.00 159.50
mm groves with Polysulphide sealant (Shore A Hardness 15-20; Make Sika/
Fosroc) of approved make as per manufacturers specification
Isolation Joints-Column: Providing & proper fixing of 20 mm thick compressible
board for isolation joints between column, beam etc. and cutting , filling of top 10
7.9 mm groves with Polysulphide sealant (Shore A Hardness 15 - 20; Make Sika/ Rmt 167.00 183.70
Fosroc) of approved make as per manufacturers specification and
recommendation.
Only Laying Design Mix Good Quality Concrete Of M30 Grade With Opc Of
43/53 Grade Mixed With Minimum Cementations Content 360 Kg/ Cum. With No
Fly Ash And Slump At Site 130 Mm (Slump Window +/- 20 Mm). Slump Test To
7.10 Be Taken As Per Bs En 12350-2. Concrete Temperature Not To Exceed 33 Degrees Sqm 9.50 10.45
At The Time Of Delivery.Concrete To Be Measured In Cubic Meters As Supplied
To The Site. Floor To Be Laid As Per The Approved Panel Sizes And The
Finalized Pour Sequence. Average Thickness- 190 Mm
7.11 Floor Casting with Concria Deco Dryshake: (Green Concrete)1. Spraying Concria Kg 57.00 57.00
Concria Hard NS (Nano Silica Dry Shake Densifier) using a low-pressure sprayer
on wet concrete screed, after vibration. 2. Apply Concria™ DECO Venetian white
Dry Shake at a rate of 4kg/Sqm. Apply as even as possible by a sprinkling carrier
or any other application tool 3.Spray second coat (20m2/liter) of Concria HARD
about:blank 3/9
NS over the dry shake layer, then worked in the surface with power trowel 4.Start
applying second coat of Concria DECO Dry Shake, approx. 3 kg/m2 immediately
after first coat of dry-shake is troweled with pans. 5.Working Concria Hard NS
into the surface with a bull float to ensure the Concria Trowel Hard is worked
deeply into the dry shake & Cement matrix. 6.Finally, power trowel the surface
with finishing blades. Use plastic blades, pans and hand trowels to avoid trowel
marks. 7.Curing the floor with water for 15 days and covering the floor with a
plastic sheet. (No Curing compound to be applied)
8 Civil work inside the building 0.00 0.00
CEMENT CONCRETE BLOCKS -150mm : Providing and constructing of cement

blocks masonary with 1500 mm thick in superstructure using cement mortar 1:6
8.1 Sqm 642.32 719.40
including cost of materials, labours, curing neccesary Scaffolding.Complete with
all leads and lift
CEMENT CONCRETE BLOCKS -200mm : Providing and constructing of cement
blocks masonary with 200 mm thick in superstructure using cement mortar 1:6
8.2 Sqm 898.57 1,006.40
including cost of materials, labours, curing neccesary Scaffolding.Complete with
all leads and lift
Providing and constructing non load bearing wall with solid concrete blocks of
size 400100x200 having a block density not less than 1800kg/m3 having a
minimum average compressive strength of 4.00 N/mm2 confirming to IS 2185
8.3 Sqm 524.02 586.91
(part 1) : 2005 and constructed with cement mortar 1:4 as per IS 2572:2005
including cost of all materials, labour charges, scaffolding, curing, hire charges of
machineries etc., complete as per specification
INTERNAL PLASTER: Providing internal cement plaster of 12 mm in single coat
with cement mortar 1:4 to block masonary including GI mesh, waterproofing
8.4 compound, rounding of corners wherever required, smooth rendering, providing Sqm 164.08 183.77
and removing scaffolding, including cost of materials, labour curing complete as
per specification. Complete with all lead and lifts
EXTERNAL PLASTER: Providing external cement plaster of 20 mm in single
coat with cement mortar 1:4 to block masonary including GI mesh, waterproofing
8.5 compound, rounding of corners wherever required, smooth rendering, providing Sqm 251.19 281.34
and removing scaffolding, including cost of materials, labour curing complete as
per specification. Complete with all lead and lifts.
INTERNAL PAINT: Providing and applying of internal paint( 2 coat Wall care +1
Coat Primer+2 coat Asian Brand Of paint), including the surface even and sand
8.6 Sqm 182.00 200.20
paper smooth, cost of materials, labours including providing and removing
scaffolding.Complete with all leads and lifts
Providing and fixing vitrified glazed tiles of approved make, quality & colour of
size 600X600X10mm thick fixed on bed of 12mm thick cement mortar for
8.7 flooring, skirting and jointed with neat cement slurry mixed with pigment to match Sqm 1,142.52 1,279.62
shade of tiles, including providing spacers at required interval and removing stains,
including cost of all materials, mortar, labour, etc complete as per specification.
Providing skirting, dadoing, rises of steps with colour glazed tiles on 10mm thick
cement plaster 1:3 and jointed with white cement slurry over existing rough plaster
8.8 Sqm 1,201.53 1,357.73
surface using glazed tiles of approved make and size including cost of materials,
labours, complete as per specifications.a) vetrified dado tiles 600x600mm
ANTISKID TILES: Providing and fixing Of vetrified type antiskid of tiles of
approved make, quality and color of size 600x600x10mm thick fixed on a bed of
8.9 25 mm cement mortar of 1:4 for flooring, skirting, cement float filling with grout Sqm 1,010.26 1,131.49
cement, curing, polishing acid wash, providing spacers at required
interval.Complete with all levels, lead and lifts
providing and laying flooring using prepolished, gang saw/water cut 19mm thick
granite laid with bed of 20mm thick 1:4 cm & jointed with neat cement slurry
mixed with pigment to match shade of granite slabs including laying POP on
8.10 finished surface and cleaning the surface, including the cost of all materials, Sqm 2,490.07 2,788.88
mortar and labour etc., complete as per specifications.a) using balck granite/Multy
Red/ Ruby Red/ Black/ Hassan Green / River Pink granite of width not less than
900mm
Providing Half nosing for 20mm thick granite slab using required machinery
8.11 including cost and conveyance of all materials, labour for all items of work, HOM Rmt 131.20 146.94
etc., complete as per specification.
Providing full nosing for 20mm thick granite slab using required machinery
Providing edge chamfering for 20mm thick granite slab using required machinery
8.14 Providing edge polishing for 20mm thick granite slab using required machinery Rmt 82.00 91.84
including cost and conveyance of all materials, labour for all items of work, HOM
about:blank 4/9

GRANITE: Providing and laying of 20mm granite of approved colour for
pantry/wash basin platforms 680 mm wide on bed of cement mortar of 1:4 with 25
8.15 mm one side polished kadappa Stone Slab supported by polished kadappa stone Rmt 4,046.80 4,532.41
vertical stand at 900mm c/c with necessary side patti of polished granite cutting for
wash basin. Complete as per the drawings complete with all levels, lead and lifts.
EXTERNAL PAINT: Providing and applying of external paint( 1 coat Primer +2
coat paint APEX ACE)including the surface even and sand paper smooth, cost of
8.16 Sqm 0.00 0.00
materials, labours including providing and removing scaffolding. Complete with
all leads and lifts
WATER PROOFING: CHEMICAL WATER PROOFING - Providing and
finishing elastomeric water proofing work for toilets as follows with mesh
CEBEX100 (Fosrock make), CONBEXTA GP2 & SBR LATEX Surface
preparation : 1. Cleaning and grinding the rough surface in the slab and sides up to
600 mm above screed concrete level. 2. Priming coat Application of Polymer
bonding waterproof slurry.Using Nitobond Sbr Latex ( SIKA Make) @ 1 litre per
8.17 bag of cement Waterproofing treatment. 3. The surface to be clean and dry with air Sqm 676.40 676.40
blower 4. Application of two coats of brush bond Sika top seal 109 treatment using
brush application. At manufacturers spec. after touch dry state/ air cure for 24 hrs.
5. Providing loose laying of protective 120 GSM geo textile fabric with proper
overlaps. Coving: Coving at Wall floor junction: At concrete/wall junctions coving
to be done with cement sand jelly. Mortar (100mmx100mm) admix with
waterproof compound of conplast WL @ 125 ml per bag of cement.
Providing & fixing of Partition cladding with 12mm thick India Cement board
with joint tape . to be provided all around as borderwith one coat primer and two
8.18 Sqm 764.24 764.24
coat wall care putty and two coat of tractor emulsion paint (using Asian brand for
paint item)
Providing and supplying of 'AEROCON Panel is a sandwich panel made up of two
fibre reinforced cement sheets, facing on either sides of a light concrete core.
8.19 Aerocon Wall Panels- standard width of 600mm andg thicknesses:50, 75mm Sqm 1,358.66 1,358.66
Lengths:2400, 2700, 3000mm. Complete as per the drawings complete with all
levels, lead and lifts.
Making grooves 2mm deep and 2mm wide (3/2 nos) for 20mm thick granite slab
8.20 using required machinery including cost and conveyance of all materials, labour Rmt 131.20 131.20
for all items of work, HOM etc., complete as per specification.
9 Interior works 0.00 0.00
GYPSUM CEILING: Providing & fixing of Gypsum Ceiling in two levels with GI
channels/gauges including 3 coats of plastic emulsion paint for the following .
Gypsum plain ceiling ( cost to include cut outs for light fitting & supports as
required. A.c grills & 3 coats of painting). Providing & fixing suspended false
ceiling which includes providing and fixing G.l perimeter channels of size 0.55mm
thick having one flange of 20mm and another flange of 30mm and a web of 27mm
along with perimeter ceiling ., screw fixed to brickwall/partition with the help of
nylon sleeves & screws at 600mm centres then suspending G.l intermediate
channels of size 45mm 0.9mm thick with two flages of 15mm each from two soffit
9.1 Sqm 1,002.00 1,102.20
at 1220mm centres with ceiling angle of width 25x 10 x 0.55mm thick fixed to
soffit with G.I. cleat and steel expansion fastners. Ceiling section of 0.55mm
thickness having knurled web of 51.5mm two flanges of 26mm each with lips of
10.5mm are then fixed to the intermediate channel with the help or connecting dips
and in direction perpendicular to the intermediate channel at 457mm centres.
12.5mm tapered edge gypboard (conforming to IS -2095-1982) is the screw fixed
to the ceiling section with 25mm drywall screws at 230mm centres. Screw fixing
is done mechanically either with screw driver or drilling machine with suitable
attachment.
Providing & Fixing Of Partition Frame Work Made Of 2" X 1" G I ( 18Gauge)
Spaced At 2’.0" & Horizontally (1.2Mm Thk). Additional Member Shall Be
Provided At Skirting, Top Band, Grooves & At Places Where Two Different
9.2 Sqm 433.00 476.30
Materials Are Combined. Necessary Supports To The Slab Should Be Taken In
Total Account. Only Clear Height And Width Of The Completed Panel Shall Be
Measured And Paid For Under This Item.
Providing & Fixing Of Partition Cladding With 12Mm Thick India Gypsum Board
With Joint Tape And Finished With Gypsum Powder . To Be Provided All Around
9.3 As Border. Gypsum To Be Finished With One Coat Primer And Two Coat Wall Sqm 581.00 639.10
Care Putty And Two Coat Of Tractor Emulsion Paint (Using Asian Brand For Paint
Item)
9.4 Providing & Fixing Of Panel Door Made Of 32Mm Thick Flush Door Finished Sqm 9,800.00 10,780.00
With Laminate Both Side. The Door Shall Be Partly Glazed With Vision Panel
Made Of 8Mm Clear Glass As Per Design And Detail. Glass Fixed With Teak
Wood Biding All Sides. As Per Design & Detail (Cost To Include Fixed Laminate
Panel Also.( Dorma Fittings): 2- D Handel-12", 4 Ball Bearing Hinges- 5": Dead
about:blank 5/9
Lock, Door Closure Heavy Duty Double Speed And Door Stopper) Including Door
Frame With 19Mm Plywood And With Laminate Finish
Providing & Fixing Of Bathroom Plastic Door(25Mm)With Including Hardware
9.5 Nos 6,266.00 6,892.60
Fitting & Labour Cost
Providing & Fixing Of Window Sofit Made Out Of 19Mm Plywood Of Size 6" .
9.6 Rmt 682.00 750.20
With 1Mm Laminate Finished
Providing & Fixing Of Laminate Skirting (4"/100Mm) On 12Mm Ply Backing On

9.7 Rmt 260.00 286.00
Partition Framework.
Providing & Fixing Of Wall And Column Paneling Only With 12Mm Ply &
9.8 Finished With 1Mm Laminate. The Panels Shall Have L2Mm X 12Mm Groove Sqm 2,590.00 2,849.00
Finished With Laminate As Per Design & Detail.
Providing & Fixing 12Mm Thick Float Glass With Teakwood Bidding On All
Sides. With Both Top & Bottom From Ff Level To False ceiling Level. The
Junction Between Wood And Channel, Glass Shall Be Sealed With Proper All
Weather Silicon Sealants. (The Glass Shall Be With Frosting Film As Per Design
9.9 Sqm 3,712.00 4,083.20
& Detail(1/3 Rd Glass Area To Be Considered For Frosting Film. Glass Edges To
Be Machine Polished. Suitable Supports To Be Taken from Slab Using
,Salwood.The Glass Shall Be 12Mm Thick As Per Design & Detail. Only Glass
Panel Shall Be Measured And Paid For Under This Item
Providing And Fixing Of Pantry Storage With Openable Shutters And Intermediate
Shelves Finished With Laminate Externally And Internally All Exposed Edges
9.10 Shall Have All Nosed Edges. Provision For Sink Is To Be Made. Water Proof Sqm 14,106.00 15,516.60
Marine Grade: Kitpiy/Century : Including Hardware Fittings(Hingis, Handle
,Lock, Magnet And Tower bolt)
Providing & Fixing Of Glass Writing Board Made Using 6Mm Float Glass.3M
Viyal Backing On 6Mm Glass And 12Mm Ply Backing. Glass Is To Fixed On The
9.11 Sqm 4,013.00 4,414.30
Ply Using Teak Wood Bidding Top And Bottom. Cost To Include Around The
Writing Board. ( It Will Be Fixed With All Around Beading With Polish
Providing & Fixing Of Softboard Made Of Fabric On 12Mm Ply Backing As Per
9.12 Sqm 2,044.00 2,248.40
Design & Detail. Basic Cost For Fabric 200 Per Meter.
Providing And Fixing Of 6Mm Mirror With 12Mm Ply Backing & Front With
9.13 Sqm 3,464.00 3,810.40
Teak Wood Bidding Including Melamine Polish All Around The Mirror
Providing & Fixing Glass Wool (5Omm Thick.) For Sound Insulation, Density Of
9.14 Sqm 494.00 543.40
The Glass Wool - 24Kg/Cum
Providing And Fixing Of Reception Table Made Of 19Mm P;Y With Linear
9.15 Laminate Inside And Color Laminate Outside And Including With All Hardware Rmt 14,106.00 15,516.60
Item Etc.
Providing And Fixing Of Window With 8Mm Glass Including Laminate Finish
9.16 Sqm 3,174.00 3,491.40
With 12Mm Ply Framing ( Teakwood Beading All Around The 8Mm Glass )
Supply & installation of toilet cubical-Boilo SS series L type Cubicals: Std Overall
Height of cubical 2000mm, overall width - 1000mm, std ground clearance 150mm,
std width of door 600mm, std depth of cubical - 1000mm. Accessories: 1) SS
Finished Anodized Top rail 2) SS Finish anodised U & H channels (All the make
of accessories for the cubicals to be as per the manufactures's specifications a) SS
9.17 Nos 25,688.33 25,688.33
304 coat hook with door stopper option with satin finish b) SS 304 Gavity hinges
c) SS latch cum occupancy indicator - 304 grade or SS privacy thumb turn with
indicator d) SS palm design adjustable foot 304 garde e) SS screw & Inserts - 304
grade f) Rubber Lining for door stopper g) High strength board with high pressure
laminate fixed on both sides h) SS - 316 Adjustable Legs
Supply and Installation of Urinal Partition: providing and fixing of urinal partition
with high strength board with high pressure laminate fixed on both side size of
9.18 Nos 2,717.00 2,717.00
panel should be not more tha 550mmx9000mm, including all necessary fittings
and fixtures as directed by Engineer Incharge.
10 Door, windows & dock levellers 0.00 0.00
2Hr Fire Rated Emergency Doors With Vision Panel Size: 1.2M X 2.2M supply &
installation Of Steel Fire Doors Using 100 X 57 X1.6Mm Thick Profile Frame
With 48 Mm Thick Shutter Using 1.0 Mm Thick G.I Sheet, Flush Design
10.1 Nos 29,425.00 32,367.50
Comprising Of Two Outer Sheet Rigidly Connected And Reinforced Inside With
Continues Vertical Stiffeners, Infilling Of Specially Designed Honeycomb
Structure Complete Finished With Powder Coating Of Approved Ral Shade. 3002.
10.2 Double Shutter Metal Doors , Size:2.5M X 2.5M Supply & installation Of General Nos 60,000.00 66,000.00
Purpose Steel Doors Using 100 X 57 X1.2Mm Thick Profile Frame With 45 Mm
about:blank 6/9
Thick Shutter Using 1.0 Mm Thick G.I Sheet, Flush Design Comprising Of Two
Outer Sheet Rigidly Connected And Reinforced Inside With Continues Vertical
Stiffeners, Infilling Of Specially Designed Honeycomb Structure Complete
Finished With Powder Coating Of Approved Ral Shade. 7035
Four Paneled Metal Doors With Vision Panel Supply & installation Of General
Purpose Steel Doors Using 100 X 57 X1.2Mm Thick Profile Frame With 45 Mm
Thick Shutter Using 1.0 Mm Thick G.I Sheet, Flush Design Comprising Of Two
10.3 Nos 62,000.00 68,200.00
Outer Sheet Rigidly Connected And Reinforced Inside With Continues Vertical
Stiffeners, Infilling Of Specially Designed Honeycomb Structure Complete
Finished With Powder Coating Of Approved Ral Shade. 7035
uPVC WINDOW: Providing and & fixing of uPVC windows made out of multi
chamered uPVC section with TPV gasket having isolated drainage and reinforced
with galvanised iron profiles of 1.8mm thick, sash with reinforcement of 1.5 mm
10.4 thick.Glazing bead for fixing of glass shall have size as per drawing and Sqm 4,808.32 5,289.15
coextruded with gasket.Windows shall be provided with 5mm plain float glass,
with standard hardware and friction stays(hinges)wall thickness of frame and sash
shall be 2-2.2 mm.
Specification for uPVC ventilators with fixed Louvers: Providing & fixing of
louvered ventilators made out of multi chambered UPVC (Matching to RAL-9016)
sections and with minimum TiO2(Tiatnium Dioxide) at 6PHR with TPV(Thermo
plastic Vulcanized) and lead free with gasket- grey colour having isolated drainage
10.5 and reinforced with Galvanized iron Profile through out the ventilator frame. the Sqm 3,350.77 3,685.85
frame having overall size of 30mmx39mm with GI reinforcement of 1mm
thickness. Louver clip in Aluminium (Powder coated in white) will be used on the
frame along with plastic parts for fixing the 4mm pin head glass wall thickness of
frame shall be 2mm. Maximum possible size 1000mmx1000mm
Providing & Fixing The Work Of Ss 304 Hand Rail Vertical Support 40Mm Pipe,
Every 1.2 Meters Span & Top Hand Pipe Will Be 60Mm With 20Mm Intermediate
10.6 Rmt 6,560.00 7,216.00
Rails With Fixing , Handrail 60Mm, Vertical & Horizontal Support -40Mm,
Intermediate Rail -20Mm, Endcap, Base Cap, Joint Elbow
DOCK LEVELLER : Providing and fixing of Maini / Gandhi make dock leveller
10.7 of 9 tons capacity, with platform size 2730 x 2130 mm, including unloading, Nos 245,000.00 269,500.00
labour charges, transportation complete.
Fabrication supplying and erecting M.S. tubular trusses of all spans as per
approved drawing & design with prefabricated steel applications using quality
material and are durable, reliable and corrosion and abrasion resistant. Welding
shall confirm to latest structural welding code. Quality shall be on various
parameters like shape, size, design gauge and polish. The entire trusses is anchored
in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm
10.8 MT 93,690.00 103,059.00
thick base plate and shoe plate. The work includes cutting, straightening, placing
in position of M.S. pipes and welding wherever necessary and applying one coat of
redoxide primer coat to all the members including cost of all materials, labour
charges, and hire charges of machineries for cutting, welding, grinding and
erection equipments, with all lead and lift, transportation, letc., complete as per
specification
MS DOOR : Providing and fixing of 1mm thick M.S Sheet door with frame and
diagonal braces of size 40x40x6 mm angle iron, 3.15mm thick M.S gusset plate at
10.9 the junctions and corners with handles, stoppers and locking arrangements etc. Sqm 4,114.00 4,114.00
including applying a priming coat, including cost of materials, labours machinery,
transporatation complete.
Providing and fixing M.S. Hand railing for Balcony/staicase etc, with 50mm dia
M.S. hollow pipe of 14gauge, welded to 20mmx20mm M.S. square rod placed
vertically, spaced at 100mm at reqular intervals of 600mm. These vertical rods
laterally tied to 3 horizotal rods spaced at equal interval. These assembly fixed to
concrete by using expansion bolts and weldin the same to reinforcement bars and
10.10 Kg 88.61 88.61
making good the surface. All the joints and sections should be cut to length,
welded and grinded wherever necessary etc, complete. The work includes cost of
all material labour charges for all items of work , hire charges for welding, cutting
and grinding equipment, and electricity charges etc., complete as per specification
and drawing.
ROLLING SHUTTER: Providing and fixing of motorised RS78GS Rolling
Shutter with Compact Gear P.R.C. Make Indirect Drive Operator, Motorised
Sectional Overhead Doors and Support Structure, with curtain made of single
skinned galvalume steel laths with natural finish, Pressed galvalume steel hood
10.11 Nos 133,375.00 133,375.00
and Motor cover with natural finish, CE Certified CRS Compact Gear P.R.C Make
Indirect Drive Operator, One Flashing Light, Three station push button with
deadman control, including labour charges, priming coat, transportation cost
complete. (Rolling Shutter -RS2(3.5m X3m))
10.12 ROLLING SHUTTER: Providing and fixing of motorised RS78GS Rolling Nos 159,896.00 159,896.00
about:blank 7/9
complete. (Rolling Shutter -RS2(3.5m X5m))
ROLLING SHUTTER: Providing and fixing of motorised RS78GS Rolling
10.13 Nos 180,301.00 180,301.00
complete. (Rolling Shutter -RS1(4mX5 m))
ALUMINIUM COMPOSITE PANEL: - ACP cladding work - Supply and
installation of aluminium composite panel of approved make and colour for main
10.14 Sqm 3,766.00 3,766.00
door entrance canopy with all neccessry frame work with suitable aluminium
sections, accessories, sealant etc. Complete including provision for lighting etc.
Supply & installation of special lift table capacity-2000kgs, deck length-3000mm,
10.15 deck width-2500mm, SH-425MM, LH-1800MM, RH-2225 MM,PP-7.5 HP Nos 650,000.00 650,000.00
(SCISSOR LIFT)
11 PEB 0.00 0.00
Design, fabrication, supply and erection of PEB Structures as per the standards and
below details including 1.Supply and installation of anchor bolts and third party
accessories 2.Providing design details one set of handcopy and a set of softcopy.
3.Stability certificate for the building as a whole for statutory need in required
11.1 form. 4.Guarantee/Waranty for the building as a whole for a minimum of 20 years. Sqm 7,759.46 7,759.46
5.Rate Shall include all loading, unloading, transportation, erection, machinaries,
tools, manpower, consumables etc. 6. Erection: to follow safe and standard
procedures during erection, bolt tightening to be made with torque wrench to
suitable presence.
THERMAL INSULATION SHEET: Supplying and Laying of reflective insulation
material shall be made up of high resistance anti corrosive both side pure
aluminium foils with 10mm closed cell non -toxic fibre free PE bubbles in
11.2 between, consists low emissivity 3%(ASTM 1371), Reflectivity 97%(ASTM 408), Sqm 110.00 110.00
Fire retardant(BS Part 6, Part 7), Aluminum foil thickness -12 microns, Roll size
-1.25 x 30 Mtr, temperature Range (- 50 c to 110 c ) . Finished surface area only
considered for measurement.
Providing & fixing of glass wool (50mm thick) ,density of glass wool-24kg/cum
11.3 Sqm 190.00 190.00
(for PEB works only)
GROUTING: Fosroc conbextra GP2 Grout shall be used for grouting below base
11.4 plate of column. The grout shall be high strength grout having a minimum Cum 47,187.65 47,187.65
characteristic compressive strength of min 30 N/mm2 at 28 days.
13 Road works 0.00 0.00
Providing and constructing dry lean cement concrete mix CC 1:5:10 base with
OPC 25mm and down size graded granite metal coarse aggregate at 0.86 cum and
fine aggrageta @ .58cum over a prepared sub base, coarse and fine aggregate
conforming to IS: 383-2016 aggragete cement ratio not to exceed 15:1 aggregate
13.1 grading after bleading to as per Table 600-1, optimum moisture content to be Cum 3,754.30 3,754.30
deteremined during trial length construction, concrete strength not to be less than
10Mpa at 7days mixed in a batching plant, transported to site, laid with a paver,
compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per
specifications clause 601 of MORTH V revision and IS 456 Table-5
Construction of granular sub base Grading V as sub base and drainage layer by
providing coarse graded crushed stone aggregate of granite/trap/basalt material,
mixing in a mechanical mix plant at OMC, carriage of mixed material to work site,
13.2 Cum 1,761.73 1,761.73
spreading in uniform layers with motor grader on prepared surfaces and
compacting with vibratoty power roller to achieve th 98% proctor density,
complete as per specifications. Clause 401 of Morth V revision.
Providng, laying, spreading and compacting crushed stone aggregate of granite /
trap / basalt to wet mix mackdam specification including pre mixing the materaila
with water at OMC in mechanical mix plant carraige of mixed materials by tipper
13.3 Cum 1,935.18 1,935.18
to site, laying in uniform layers with paver in sub-base/base course on welll
prepared surface and compacting with vibratory roller to achive the desired density
complete as per specification. MORTH specification No 406.
13.4 Construction of cement concrete kerb stone with top and bottom width 115 and Rmt 357.63 357.63
165 mm respectively, 250 mm high in M20 grade PCC on M-10 grade foundation
150mm thick, foundation having 50mm projection beyound kerb stone, kerb stone
laid with kerb laying machine, foundation concrete laid manually, including cost of
all material, labour, HOM, form work, scaffolding & centering complete as per
about:blank 8/9
specification all complete as per clause 400.8 complete as per specification A using
concrete mixer MORTH specification No 408
Providing and laying heavy duty interlock pavers, using cement and course sand
for manufacture of block of approved size, shape and colour with minimum
compressive strength of 281 kg per sqm over 50mm thick sand bed (average
thickness) and compacting with plate vibrator having 3 tons compaction force
13.5 Sqm 701.28 701.28
thereby forcing part of the sand underneath to come up in between joints, final
compaction of paver surface joints into its final level, including cost of material,
labour and HOM complete as per specifications. a) Hevay duty cobble stones
75mm to 80mm
Control & Construction Joints: Providing and filling grooves with PU (Shore A
Hardness 28 - 45) based sealant of BASF MasterFlex 474 / Sika/ Fosroc or
Equivalent in construction joints & controlled joints top 10 mm of section filled by
13.6 Rmt 106.00 106.00
sealant and below followed backer rod. The rate includes the cost of all ancillary
works as required, as per specifications and as recommended by manufacturer of 4
x 50 mm sectional control joint size & 4 X 15 mm Construction Joints
PLASTIC SHEET: Providing and laying of polythene sheet of 100 microns for
13.7 Sqm 9.50 9.50
curing of concrete floor surface for a minimum curing period of 10 Days.
GARDEN SOIL: Supply and spreading of good Garden Soil without stones/lumps
13.8 Cum 222.33 222.33
etc. (soil within the site)
about:blank 9/9

Item of Works

Uploaded by

Copyright:

Available Formats

Item of Works

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Item of Works

Uploaded by

Copyright:

Available Formats

10/31/23, 3:21 PM RFC Register

1 Earthwork 0.00 0.00

SURFACE PREPARATION: Clearing of grass and unwanted weeds, clearing and

2 Antitermite 0.00 0.00

ANTI TERMITE TREATMENT: Providing and injecting chemical emlsion for

2.2 Antitermite New IOW Sqm 4.00 4.00

3 Cement concrete works 0.00 0.00

SerialNo Specification Unit Base Rate Qual Rate

4 Reinforcement 0.00 0.00

Providing TMT steel bar reinforcement conforming to IS-1786, Fe-500 grade

5 Shuttering works 0.00 0.00

SerialNo Specification Unit Base Rate Qual Rate

7 FM2 class flooring 0.00 0.00

PLATE DOWELS: Providing and proper fixing of diamond plate dowels of 6 mm

SerialNo Specification Unit Base Rate Qual Rate

8 Civil work inside the building 0.00 0.00

CEMENT CONCRETE BLOCKS -150mm : Providing and constructing of cement

SerialNo Specification Unit Base Rate Qual Rate

etc., complete as per specification.

9 Interior works 0.00 0.00

SerialNo Specification Unit Base Rate Qual Rate

Providing & Fixing Of Laminate Skirting (4"/100Mm) On 12Mm Ply Backing On

10 Door, windows & dock levellers 0.00 0.00

SerialNo Specification Unit Base Rate Qual Rate

SerialNo Specification Unit Base Rate Qual Rate

11 PEB 0.00 0.00

13 Road works 0.00 0.00

SerialNo Specification Unit Base Rate Qual Rate

You might also like