Scribd
Upload
4 views

DC Machines Unit 5 Notes

Uploaded by

bestgameandtutorial.11
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

DC Machines Unit 5 Notes

Uploaded by

bestgameandtutorial.11
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 42

Unit 4

D C Machines
Maxwell’s Cork screw Rule :
Maxwell’s Cork screw Rule :
Hold the cork screw in yr right
hand and rotate it in clockwise
in such a way that it advances in
the direction of current. Then
the direction in which the hand
rotates will be the direction of
magnetic lines of force .
Fleming’s left hand rule
Fleming’s left hand rule
Used to determine the direction of force acting
on a current carrying conductor placed in a
magnetic field .
The middle finger , the fore finger and thumb of
the left hand are kept at right angles to one
another .
The middle finger represent the direction
of current
The fore finger represent the direction of
magnetic field
The thumb will indicate the direction of
force acting on the conductor .
This rule is used in motors.
Fleming’s Right hand rule
Fleming’s Right hand rule
Used to determine the direction of emf induced
in a conductor
The middle finger , the fore finger and thumb of
the left hand are kept at right angles to one
another.
The fore finger represent the direction
of magnetic field
The thumb represent the direction of
motion of the conductor
The middle finger will indicate the
direction of the inducted emf .
This rule is used in DC Generators
Len’s Law
The direction of induced emf is given by
Lenz’s law .
According to this law, the induced emf will
be acting in such a way so as to oppose the
very cause of production of it .

e = -N (dØ/dt) volts
DC Generator
Mechanical energy is converted to electric
energy

Three requirements are essential


1. Conductors
2. Magnetic field
3. Mechanical energy
Working principle
A generator works on the principles of
Faraday’s law of electromagnetic induction

Whenever a conductor is moved in the


magnetic field , an emf is induced and the
magnitude of the induced emf is directly
proportional to the rate of change of flux
linkage.

This emf causes a current flow if the


conductor circuit is closed .
DC Machine

Commutator
Sectional view of a DC machine
Construction of DC Generator
Field system
Armature core
Armature
winding
Commutator
Brushes
Field winding
Rotor and rotor winding
Working principle of DC motor
Working principle of DC motor
Force in DC motor
Armature winding
There are 2 types of winding
Lap and Wave winding
Lap winding Wave winding
A=P A=2

The armature I t is
used in low
windings are current output
divided into and high voltage.
no. of sections
equal to the no 2 brushes
of poles
Field system
It is for uniform magnetic field within
which the armature rotates.
Electromagnets are preferred in
comparison with permanent magnets
They are cheap , smaller in size ,
produce greater magnetic effect and
Field strength can be varied
Field system consists of the
following parts
Yoke
Pole cores
Pole shoes
Field coils
Armature core
The armature core is cylindrical
High permeability silicon steel
stampings
Impregnated
Lamination is to reduce the eddy
current loss
Commutator
Connect with external circuit
Converts ac into unidirectional current
Cylindrical in shape
Made of wedge shaped copper segments
Segments are insulated from each other
Each commutator segment is connected to
armature conductors by means of a cu strip called
riser.
No of segments equal to no of coils
Carbon brush
Carbon brushes are used in DC machines
because they are soft materials
It does not generate spikes when they contact
commutator
To deliver the current thro armature
Carbon is used for brushes because it has
negative temperature coefficient of resistance
Self lubricating , takes its shape , improving
area of contact
Brush rock and holder
Carbon brush
Brush leads (pig tails)
Brush rocker ( brush gear )
Front end cover
Rear end cover
Cooling fan
Bearing
Terminal box
EMF equation
Flux cut by 1 conductor
in 1 revolution =P*φ
Flux cut by 1 conductor in
60 sec = P φ N /60
Avg emf generated in 1
conductor = PφN/60
Number of conductors in
each parallel path = Z /A

Eg = PφNZ/60A
Types of DC Generator
DC generators are generally classified
according to their method of excitation .

Separately excited DC generator

Self excited D C generator


Further classification of DC Generator
Series wound generator
Shunt wound generator
Compound wound generator
Short shunt & Long shunt
Cumulatively compound
&
Differentially compound
Losses in DC Generators
1. Copper losses or variable losses
2. Stray losses or constant losses
Stray losses : consist of (a) iron losses or core
losses and (b) windage and friction losses .
Iron losses : occurs in the core of the machine
due to change of magnetic flux in the core .
Consist of hysteresis loss and eddy current
loss.
Hysteresis loss depends upon the frequency ,
Flux density , volume and type of the core .
Losses
Hysteresis loss depends upon the frequency ,
Flux density , volume and type of the core .

Eddy current losses : directly proportional to


the flux density , frequency , thickness of the
lamination .
Windage and friction losses are constant due to
the opposition of wind and friction .
Applications
Shunt Generators:
a. in electro plating
b. for battery recharging
c. as exciters for AC generators.
Series Generators :
A. As boosters
B. As lighting arc lamps
DC Motors
Converts Electrical energy into Mechanical
energy
Construction : Same for Generator and
motor
Working principle : Whenever a current
carrying conductor is placed in the
magnetic field , a force is set up on the
conductor.
Back emf
The induced emf in the rotating armature
conductors always acts in the opposite
direction of the supply voltage .
According to the Lenz’s law, the direction of the
induced emf is always so as to oppose the
cause producing it .
In a DC motor , the supply voltage is the cause
and hence this induced emf opposes the
supply voltage.
Classification of DC motors

DC motors are mainly classified into


three types as listed below:
 Shunt motor
 Series motor
 Compound motor
Differential compound
Cumulative compound
Speed control of DC motors
According to the speed equation of a dc motor
N ∞ Eb/φ
∞ V- Ia Ra/ φ
Thus speed can be controlled by-
Flux control method: By Changing the flux by
controlling the current through the field
winding.
Armature control method: By Changing the
armature resistance which in turn changes
the voltage applied across the armature
Flux control
Advantages of flux control:
It provides relatively smooth and easy control
Speed control above rated speed is possible
As the field winding resistance is high the field current
is small. Power loss in the external resistance is small .
Hence this method is economical
Disadvantages:
Flux can be increased only upto its rated value
High speed affects the commutation, motor operation
becomes unstable
Armature voltage control method
The speed is directly proportional to the voltage
applied across the armature .
Voltage across armature can be controlled by
adding a variable resistance in series with the
armature
Potential divider control :
If the speed control from zero to the rated speed is
required , by rheostatic method then the voltage
across the armature can be varied by connecting
rheostat in a potential divider arrangement .
Starters for DC motors
Needed to limit the starting current .
1. Two point starter
2. Three point starter
3. Four point starter
Applications:
Shunt Motor:
Blowers and fans
Centrifugal and reciprocating pumps
Lathe machines
Machine tools
Milling machines
Drilling machines
Applications:
Series Motor:
Cranes
Hoists , Elevators
Trolleys
Conveyors
Electric locomotives
Applications:
Cumulative compound Motor:
Rolling mills
Punches
Shears
Heavy planers
Elevators

You might also like