NO: DATE: SAI HIGHWAY AND BUILDERS CUSTOMER: PVT.LTD. SERVICE ENGINEER: Mr ABUBAKKAR MAITY . ENGG MOBILE NO: 7364055774 TY PE OF CALL: NEW - ERE & COMM SITE ADDRESS: Podaiyahat,,,Godda EQUIPMENT MODEL: SLM4300 MODEL-MACHINE SLM4300-2158 SERIAL NO: GST NO: 9 DIGIT CRM 809675500 SERIAL NO: MACHINE Godda MANUFACTURE 2158 LOCATION: SERIAL NO: PRIME MOVER PERSON INCHARGE: Amarjeet kumar SERIAL NO: 5H.4356/2220144
PHONE: 9534386502 MFG DATE: May-22
CUSTOMER EMAIL DATE OF 05-07-2022 ID: COMMISSIONING: ADDITIONAL EMAIL [email protected] NATURE OF JOB: Service and Repairs ID: CALL ATTRIBUTE: General NATURE OF Inspection PROBLEM:
HMR1: 10.55 HMR2: CMR: 809675500
TRAVEL TIME: JOB TIME: TRAVEL TIME:
DATE: REMARK: FROM: TO: FROM: TO: FROM: TO: 05-07-2022 01:19 08:19 08:19 14:19 14:19 20:19 DET AILED SERVICE REPORT : CUSTOMER COMPLAINT: Commisioning ACTION TAKEN: Visit the site at first check machine hydraulic oil level engine oil level and Diesel level all foundok then start the machine and check machine hour meter Perking break Check mounting bolts tightness of hydraulic pump, Motors and Gear boxes all found full tight condition is ok.then Checkbattery, Alternator and self motor cables tightness condition found ok. Check battery cut off switch condition found ok. Check overall machine oil leakages before cranking engine and also check condition of material feeding and unloading hopper found ok. Check condition of engine fan wings and Fan belt tightness before engine cranking Check Propeller shaft joint bolts tightness before engine cranking all should be found ok. Check all pedal operations found working smoothly. Check Hand accelerator and all four wheel bolts tightness engine smoke condition temperature gauge working condition Check function of battery charging Indicator weighing meter and printer working conditions bucket operation test gear changing mixing loading unloading switch and battery working found ok air filter head light machine forward Reverse test ok check horn, and all fuse over ride all sensor working properly all working smoothly and found ok. Now machine condition is over all found ok. Then I have trained the operator to do all the maintenance as per the time of the machine and Check properly everything on the machine every day c OTHER REMARKS / RECOMMENDATION:: Coolent level was low W ind screen - front was broken
Cabin small mirror angel was broken
Drum scratch found Reason of all these problem may be transportation problem
PARTS AND EQUIPMENT DETAILS:
Customer Requirement Part No. Description Quantity Model OTHER CATEGORY DETAILS: Category Information Required
CUSTOMER PHOTO & SIGNATURE SERVICE ENGINEER PHOTO & SIGNATURE