0% found this document useful (0 votes)
31 views1 page

Moving Coil Input Transformer LL1681

TRANSFO LUNDAHL 1681

Uploaded by

M P
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
31 views1 page

Moving Coil Input Transformer LL1681

TRANSFO LUNDAHL 1681

Uploaded by

M P
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 

Tibeliusgatan 7 International Domestic


SE-761 50 NORRTÄLJE Phone +46 - 176 13930 0176-13930
   SWEDEN Fax +46 - 176 13935 0176-13935

Moving Coil Input Transformer


LL1681
The LL1681 is a large core moving coil input transformer with a mu-metal core.
The LL1681 consists of two coils, each with a two-sectioned primary winding and one high level secondary
winding (with paper insulation) separated by electrostatic shields.
The transformer is magnetically shielded by a mu metal housing.

Turns ratio: 1 + 1 : 13 + 13
Dims (Length x Width x Height above PCB (mm)): 48 x 29 x 20
Pin layout (viewed from component side) and winding schematics:

5 10
5 10

4 9
4 9
LL1681 8
1 6
2 (Top view) 7
1 6
2 7
8 +can & core

Spacing between pins: 5.08 mm (0.2")


Spacing between rows of pins: 35.56mm (1.4")
Weight: 90 g
Rec. PCB hole diameter: 1.5 mm

Static resistance of each primary: 4.8Ω


Static resistance of each secondary: 820Ω
Distortion < 0.15% at –10 dBU, 50Hz
(Transformer connected 1:26, source impedance 40 ohms) (typically 0.1%)
< 1% at +5 dBU, 50Hz

Frequency response, balanced input 7Hz – 70 kHz +/- 1dB


(Transformer connected 1:13, source 50Hz, sec. level +10dBU)
Frequency response, Unbalanced input 7Hz – 40 kHz +/- 1dB
(Transformer connected 1:13, source 50Hz, sec. level +10dBU)
Isolation between primary and secondary windings/ between 4 kV / 2 kV
windings and shield:

Connection for turns ratio 1 : 26 Connection for turns ratio 1 : 13

5 10 5 10
4 9 4 9
LL1681 8 LL1681 8
2 (Top view) 7 2 (Top view) 7
1 6 1 6

Indicates phase

R020924

You might also like