Woodfield Marine Loading Arm Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

FORM NO.

MARINE LOADING ARM DATA ISSUE NO. 01


W30‐02‐F‐027‐A4R0

SHEET DATE:
01.06.2018
REV. 00 /
DATE: 02.04.2021
FORM NO.
MARINE LOADING ARM DATA ISSUE NO. 01
W30‐02‐F‐027‐A4R0

SHEET DATE:
01.06.2018
REV. 00 /
DATE: 02.04.2021

Company Information
Date Company
Contact Person Project Name
Phone Address
E Mail Project Location

Marine Loading Arm Details

Basic Information
No of MLA’s
Size of MLA Diameter Of Connection
Type of MLA Fixed on Jetty / Trailer Mounted
Material of Construction CS / LTCS / SS
Operation of MLA Electro‐Hydraulic / Manual
ERS Required Yes / No
Yes / No
QCDC required
If Yes ‐ Manual / Hydraulic

Auxiliaries Required / Specified


Ladders & Platforms Yes / No
Alarm 1 Step / 2 Step / No
Vacuum Breaker Yes / No
Greasing System Manual / Centralized
Vapour Return Line 2” / 4” / 6” / No
Position Monitoring System Yes / No
Heat Tracing / Insulation Yes / No
Stripping System Yes / No
Nitrogen Purge Line 1” / 2” / no.
Product Data
Arm Viscosity Density Pressure (barg) Temperature(°C) Flow Rate
Products
Tag (cSt) (kg/dm3) Working Design Working Design (M3/h)
FORM NO.
MARINE LOADING ARM DATA ISSUE NO. 01
W30‐02‐F‐027‐A4R0

SHEET DATE:
01.06.2018
REV. 00 /
DATE: 02.04.2021

Hydraulic and Electrical Specifications / Accessories


Description Per Dock
Remote Control : Yes / No
Pendant Remote : Yes / No
PLC Location : Safe Area / Hazardous area
PLC Redundancy (Power supply & CPU) : Yes / No
Safety Integrity Level for ERS loop(SIL) : 1 / 2 / No
Alarms for extension / slewing : 1 step / 2 Step / No
Stand by Pump : Yes / No
Low / Fast movement : Yes / No
Environmental Conditions / Data
Hazardous Area Classification
Horizontal Seismic acceleration m/s2
Vertical seismic acceleration m/s2
Operating Wind Speed m/s
Design Wind Speed m/s
Minimum Ambient Temperature °C
Maximum Ambient Temperature °C
Power Supply at Site
FORM NO.
MARINE LOADING ARM DATA ISSUE NO. 01
W30‐02‐F‐027‐A4R0

SHEET DATE:
01.06.2018
REV. 00 /
DATE: 02.04.2021
FORM NO.
MARINE LOADING ARM DATA ISSUE NO. 01
W30‐02‐F‐027‐A4R0

SHEET DATE:
01.06.2018
REV. 00 /
DATE: 02.04.2021

Dock Information
Ref. Meters Description
A Dock edge to centerline of riser
Compressed fender to jetty face
B
Relaxed fender to jetty face
C Lowest Low water level to Jetty level(LLW)
D Distance between Lowest low water level to Highest High water level (HHL)
E Inlet/Outlet Flange centre line from Jetty level
F
Any Obstacles present around the location of MLA
G
H Distance between Centre’s of adjacent MLA

Ship Data
Minimum Vessel Size (DWT or m3)
Maximum Vessel Size (DWT or m3)
Minimum Distance from Flange face to vessel edge
I
Maximum distance from Flange face to vessel edge
J Vessel Flange to Lowest Low Water (smallest vessel, full)
K Vessel Flange to Highest High Water(largest vessel, empty)
Minimum distance between two Flange’s on Vessel manifold
L
Maximum distance between two Flange’s on Vessel manifold
M Rail Height
Minimum distance of vessel flange to Vessel Deck
N
Maximum distance of vessel flange to Vessel Deck
Ship Movement Data Maximum
During Normal Loading Conditions During Normal Connection / disconnection
Transverse drift Drift speed in for alarms Transverse
(Perpendicular to deck) setting in drift area
Longitudinal Drift (0.12 to 0.25 m/s) Longitudinal
(parallel to Deck)

You might also like