MATERIAL LIST FOR ONE STANCHION MK'D B-8453-HR22

TOTAL QTY REQUIRED : 1 No(s)

MARK DESCRIPTION QTY MATERIAL LENGTH WGT T. WT. (KG)

P754 L75*50*6 2 ASTM A36/*** 1612 8.9 17.9
P1292 FLT5*50 1 ASTM A36/*** 1749 3.4 3.4
P1293 Ø48.26*3.68 1 ASTM A53/*** 1749 6.8 6.8
1749 ASTM A36/***
P1294 FLT5*150 1 1749 10.3 10.3
P1298 PLT8*105 2 ASTM A36/*** 210 1.4 2.8
TOTAL WEIGHT FOR ONE ASSEMBLY 41.1
373 1200 176
BOLT LIST ONE ASSEMBLY B-8453-HR22
SITE/SHOP BOLT DESCRIPTION QTY/ONE QTY/ALL GRADE FINISH
Site M 16 x 55 8.8XOX 4 4 A325M/A563 Nuts Galvanized

P1293

P754
1749

P1292

GENERAL NOTES

1612
P1294 1) SURFACE PREPARATION FOR GALVANIZATION:
SANDBLASTING SA21/2.

2) GALVANIZATION: ASTM A123/A123M

1749 3) WELDING WHERE NOT INDICATED SHALL BE CONTINUOUS

FILLET WELD. DIMENSION "S" OF NON-DIMENSIONED FILLET

1749 WELDS SHALL AT LEAST BE EQUAL TO: T1

S = 0.80 * T for Fy <= 250 MPa

P1293 S = 1.00 * T for 250 < Fy <= 350 MPa T2
P754
- Where: S

P1298 P1298 SCALE 1:10 T = MIN (T1, T2) Fy = STEEL YIELD STRENGTH OF THE
ELEMENTS TO BE CONNECTED.

4) THE MINIMUM FILLET WELD SIZE TO BE USED FOR

8

STRUCTURAL WELDS IS 5mm.

210
50
5) A MINIMUM SEAL WELD LEG SIZE OF 3mm FILLET WELDS
131 SHALL BE USED.
210
P754 6) ALL STRUCTURAL STEEL, INCLUDING PLATFORMS,

35
1200
HANDRAILS , LADDERS, CAGES, STAIR TREADS, CHEQUERED
- PLATES & GRATINGS SHALL BE HOT DIP GALVANIZED ONLY,

40
SCALE 1:10 EXCEPT CRANES, LIFTING BEAMS, MONORAILS, DAVITS WHICH
1612
ARE GALVANIZED AND PAINTED RAL 1004 SAFETY YELLOW.
P754
- FOR DETAILS REFER TO PROJECT SPECIFICATION 14.192.028”
P1298 P754 P1298
SCALE 1:10
105
75

SD-UJV
2 ø 18 DOCUMENT STATUS SIGNED DATE
2 ø 18
1 - ACCEPTED AS SUBMITTED (submit certified as final)
A - A
SCALE 1:10 2 -
REVISE AND RESUBMIT
INCORPORATE COMMENTS, UP-REV AND RESUBMIT

REJECTED - Document unacceptable, REVise and resubmit

3 -
(work can proceed where not impacted by this rejection)

4 - REVIEW NOT REQUIRED

SCF - SUPPLIER CERTIFIED AS FINAL

ISSUE OF CERTIFIED FINAL DOCUMENT DOES NOT RELIUPES SUPPLIER OF

RESPONSIBILITY OR LIABILITY UNDER THE CONTRACT/PURCHASE ORDER

CWP No:A11-WP8.1-020-FI-MC-101
1749 210
1749
35 140 35
50

AA CERTIFIED AS FINAL RA 10/11/23 ET 10/11/23 EA 10/11/23

2 ø 18 A CERTIFIED AS FINAL RA 16/10/23 ET 16/10/23 EA 16/10/23
150

OC RE-ISSUED FOR REVIEW RA 15/09/23 ET 15/09/23 EA 15/09/23

105

P1292
- OB RE-ISSUED FOR REVIEW UP 30/06/23 ET 30/06/23 EA 30/06/23
53

SCALE 1:10 P1294 OA RE-ISSUED FOR REVIEW UP 01/03/23 ET 01/03/23 EA 01/03/23

P1298 - O ISSUED FOR REVIEW UP 02/02/23 ET 02/02/23 EA 02/02/23
- SCALE 1:10
REV DESCRIPTION DWN DATE CHKD DATE APPD DATE
SCALE 1:10
REVISIONS
This Document is confidential. The copyright therein is vested in Nigeria LNG Ltd, Nigeria.
Recipient must obtain the written authority of the said company before wholly or partially duplicating.
All rights reserved.
PO No: 1423030
VENDOR DRAWING. No. NIGERIA LIQUEFIED NATURAL GAS
TGIL-AD-19589-310 NLNG - BONNY
DRAWN: RA PROJECT
DATE: 10/11/23 NLNG TRAIN 7
CHECKED: ET
VENDOR NAME
DATE: 10/11/23
EA
THOMPSON & GRACE INVESTMENTS LTD.
APPROVED:
LOCATION DISCIPLINE UNIT No
DATE: 10/11/23
BONNY ISLAND, NIGERIA CIV 2000
APPD. LNG:
TITLE

1 No.STANCHIONREQUIRED AS DRAWN MARKEDB-8453-HR22 DATE: PO 1423030 Thompson & Grace: ASSEMBLY DRAWING
{QRCODE} CONTRACTOR DRAWING. No.
L020-CD-B-19589 FOR STEEL STRUCTURE FOR B-8453
SCALE COMPANY PROJECT No. COMPANY DRAWING No. SHEET REV
B190170NTP
CAD REF: T-14.419.589-SHT648.dwg ORIGINAL SIZE: A1 CLASSIFICATION: MOST CONFIDENTIAL CONFIDENTIAL RESTRICTED UNRESTRICTED 1:10 CONTRACTOR PROJECT No.
N88480 T-14.419.589 648 OF 722 AA