TECHNICAL DATA SHEET

CONCEPT
DESCRIPTION
Light, strong and comfortable helmet. Manufactured from high quality, strong
ABS material, the Concept is up to 20% lighter than most other helmets.

SPECIFICATION
Code Option Weight
S09C*A Full Peak Slip Ratchet Non-Vented 318gm
S08C*A Reduced Peak Slip Ratchet Non-Vented 315gm
S09C*F Full Peak Slip Ratchet Vented 318gm
Product Codes and
S08C*F Reduced Peak Slip Ratchet Vented 315gm
Helmet Options
S09C*R Full Peak Wheel Ratchet Non-Vented 337gm
S08C*R Reduced Peak Wheel Ratchet Non-Vented 334gm
S09C*RF Full Peak Wheel Ratchet Vented 337gm
S08C*RF Reduced Peak Wheel Ratchet Vented 334gm
51 - 63cm (Slip Ratchet)
Size
52 - 64cm (with Premium ‘Twist2Fit’ Wheel Ratchet)
Peak Full (40mm) or Reduced (20mm)
* Insert colour code of helmet.

MATERIALS
Shell ABS (Acrylonitrile-Butadiene-Styrene)
Cradle 6 Point Terylene webbing
Headband LDPE (Low Density Polyethylene)
Sweatband Dry-Tech (Polyester Fabric)
Wheel Ratchet Acetal with HDPE straps, Black foam 3mm

COLOURS
White Blue Red Yellow Orange Green Light Black Bright Bright
Blue Yellow Orange

Colour Code W B R Y O G LB K HVY HVO

RAL 9010 5026 3031 1018 2003 6036 5005 9005 1026 2005
Pantone White 2768 1807 109 1505 343 2935 Black 809 1655
Please note: the closest matching RAL colours are listed.

CORPORATE BADGING

Front Sides Rear

85 x 50mm 80mm 30 x 25mm

25 x 60mm 35mm 100 x 20mm

Customer Service Hotline +44 (0)1842 855045 | [email protected] | www.centurionsafety.eu | 11-19 UK

EUROPEAN AND INTERNATIONAL STANDARDS WITH OPTIONS
Product EN 397:2012 + A1:2012 Options ANSI/ISEA Options CSA/ CAN
outside the Z89.1-2014 outside the Z94.1-05
scope of Type 1 scope of Type 1
EN 397 ANSI/ISEA

Tested to the performance requirements

For use on low voltage insulations

of AS/NZS 1801:1997 Type 1

Class C (Conductive 0V a.c.)

Class C (Conductive 0V a.c.)

EN 50365:2002 (1000V a.c.)
- 30°C (Low Temperature)

- 40°C (Low Temperature)

- 30°C (Low Temperature)

- 40°C (Low Temperature)

Lateral Deformation (LD)

Class E (20,000V a.c.)

Class E (20,000V a.c.)

(Electrical Resistance)

(Electrical Resistance)
Molten Metal (MM)

1000V a.c.
440V a.c.
Full Peak Non-Vented Wheel
Ratchet S09C*R P P P P P P P P P
Reduced Peak Non-vented Wheel
Ratchet S08C*R P P P P P P P P P
Full Peak Vented Wheel Ratchet
S09C*RF P P P P P P P
Reduced Peak Vented Wheel
Ratchet S08C*RF P P P P P P P
Full Peak Non-Vented Slip Ratchet
S09C*A P P P P P P P P P
Reduced Peak Non-Vented Slip
Ratchet S08C*A P P P P P P P P P
Full Peak Vented Slip Ratchet
S09C*F P P P P P P P
Reduced Peak Vented Slip Ratchet
S08C*F P P P P P P P
Note: EN 397 Electrical Resistance applicable to unvented shells ONLY

ACCESSORIES
Face Compatible with Connect, Euro and Contour range of Face protection

Accessory Clips Use S570 Connect or S565 Euro accessory clips. Use S585 clips (supplied with Contour Carrier).
Compatible with Centurion helmet mounted Scala XI S72CE and Scala X S71CE Ear Defenders (supplied with
Ear
S570 Connect and S565 Euro accessory clips)
Eye Clear S589 or Smoke Grey S589SE moulded Polycarbonate Eye Shield with anti scratch/fog coating
S30HIRS Silver High Intensity Reflective Sticker sets available. Material meets the specification
Stickers
requirements of EN 12899-1 Ra2
Unique Features Internal card holder in helmet for identification or medical information (credit card size 54 x 85mm)

Sweatband S31D Dry-Tech sweatband

Cradle with Slip Ratchet S33/34 Terylene Cradle with Dry-Tech Sweatband

Cradle with Wheel Ratchet S33/35 Terylene Cradle with Premium ‘Twist2Fit’ Wheel Ratchet and Dry-Tech Sweatband

Chinstrap Compatible with S30E 2 point chinstrap, 4 point SecurePlus chinstraps S30Y, S30LY and S30YE elasticated

Customer Service Hotline +44 (0)1842 855045 | [email protected] | www.centurionsafety.eu | 11-19 UK

PACKAGING AND MAINTENANCE
Packaging 20 per colour, box size 58 x 44 x 43cm, box weight 7.34kg
Can be stored and transported in their original cartons at ambient temperature (0°C to + 30°C)
Storage May be stored in the dark for up to 5 years
Do not store in direct/high heat or sunlight as this may distort the shell
The Centurion safety helmet has an in-use life of up to 5 years
Lifetime
Excessive wear and tear can considerably reduce the lifespan of the product
Cleaning Clean using warm soapy water and soft cloth

Disposal Recycling is preferred when possible. Look out for the recycling symbol for material category

Customer Service Hotline +44 (0)1842 855045 | [email protected] | www.centurionsafety.eu | 11-19 UK