414 170

GÇÇmotion const
Lenze

Geared motors
Lenze

G motion
Lenze GmbH & Co KG, Postfach 10 13 52, D-31763 Hameln, Site: Groß Berkel
Hans-Lenze-Straße 1, D-31855 Aerzen, Phone ++49 (0) 5154 82-0, Telefax ++49 (0) 5154 82-21 11
E-Mail: [email protected] · Internet: http://www.Lenze.com
const
Technical alterations reserved · Printed in Germany 11.00 by ME / LHM · 98/11 en
 G motion const - The programme
Geared motors for constant output speed providing high
functionality through a great variety of gearbox possibilities
and motor options
G motion
Helical geared motor
GST
const
0.12 to 45 kW
Internal fan
Geared motor with parallel-axial
solid shaft in foot and flange
design. Like all other gearboxes,
the optimised toothing geometry
ensures quiet running.

Internal fan with increased

inertia load

Low-profile geared motor Separate fan

GFL
0.12 to 45 kW
Solid shaft
Mainly used with a shaft-
mounted geared motor with
hollow shaft.
Perfectly matching connection
elements and high toothing
Hollow shaft quality ensure a low backlash
for all Lenze gearboxes.
Spring- Internal fan
operated Hand wheel
brake
Bevel geared motor
Hollow shaft with GKR
shrink disc 0.12 to 0.75 kW
Right-angle geared motor for
the lower torque range with a
Internal fan with increased
wear-resistant bevel-gear
inertia load
toothing. Thanks to the compa-
ratively high efficiency energy
savings are also possible for Speed /
Output flange this power range. Backstop position
encoder Separate fan

Helical-bevel geared motor

GKS
0.12 to 45 kW
Right-angle geared motor in
solid and hollow shaft design
providing high efficiency.
Precisely selectable output
speeds are ensured by a Internal fan
reasonably divided ratio range
from 5 to 315.
Speed /
position
encoder
Helical-worm geared motor
GSS Separate fan
0.12 to 9.2 kW
Economical, providing a high
power density. All Lenze
right-angle geared motors can
be easily integrated into the
machine construction because
of three mounting surfaces and
a pitch circle.

Lenze
Product key

Type code

Gearbox type Gearbox size Number

04 05 06 07 09 11 14 of stages
GST
     1

       2

      3

GFL

       2

      3

GKR

 2

GKS

       3

      4

GSS

    2

   3
Product key

Type code
Gearbox type Gearbox Number Input design Output design Drive size
size of stages

–
Helical gearbox Three-phase AC Solid shaft Without flange
G S T geared motor M V R –
With flange Motor (071-12)
Low-profile Gearbox with mounting flange Hollow shaft
G F L gearbox for IEC standard motors N H K (through-bore holes)
Helical-bevel Gearbox with free Hollow shaft with With flange
G K S gearbox input shaft W shrink disc S L (threaded bore holes)
Mounting flange (1C)
Bevel gearbox
G K R A
Foot design
with centering
Helical-worm gearbox
G S S B
Foot design
without centering Free input shaft (1C)

Without foot,
C with centering
Without foot,
D without centering

Mounting position (A-F) and position of the system components (1-6)

Terminal box: 2, 3, 4, 5
GST Without terminal box: 0

A B C D E F

Solid shaft: 6 Foot: 3, 4 Terminal box: 2, 3, 4, 5

GFL Hollow shaft: 0 Without foot: 0 Without terminal box: 0
Hollow shaft with shrink disc: 1, 6

A B C D E F

Solid shaft: 3, 5, 3+5 Flange: 3, 5, 3+5 Terminal box: 2, 3, 4, 5

GKS / Hollow shaft: 0 Without flange: 0 Without terminal box: 0
GSS Hollow shaft with shrink disc: 3, 5

A B C D E F

GKR Solid shaft: 3, 5, 3+5 Flange: 3, 5, 3+5 Terminal box: 2, 3, 4, 5

Hollow shaft: 0 Without flange: 0 Without terminal box: 0
Hollow shaft with shrink disc: 3, 5

A B C D E F
Contents

General information
1-1 to 1-11 1

Geared motors and gearboxes

General information 2-1 to 2-25
2
Product information 2-2
Selection 2-4
Drive selection 2-12

Helical gearboxes 3-1 to 3-109

3
Technical data 3-2
Selection tables 3-6
Dimensions 3-78
Weights 3-106

Low-profile gearboxes 4-1 to 4-95

4
Technical data 4-2
Selection tables 4-6
Dimensions 4-66
Weights 4-93

Helical-bevel gearboxes 5-1 to 5-121

5
Technical data 5-2
Selection tables 5-8
Dimensions 5-82
Weights 5-120

Helical-worm gearboxes 6-1 to 6-75

6
Technical data 6-2
Selection tables 6-6
Dimensions 6-50
Weights 6-74

Motor options 7-1 to 7-23

7
Drive selection 7-2
Dimensions 7-15

Fax order forms / Lenze worldwide

8-1 to 8-9 8

Lenze 1-5
 Introducing Lenze

No matter which drive solution you imagine,

we make your dreams come true.
Following our maxim of “one stop shopping” we offer you
1 a complete programme of electronic and mechanical drive
systems distinguished by reliable and powerful products.
The range of our products includes frequency inverters,
speed controllers, servo controllers, variable speed drives
and gearboxes, clutches and brakes as well as motors.
So Lenze is the competent partner for your applications –
we offer single components and solutions for complete
drive systems including planning, execution and
commissioning. Furthermore, a worldwide service and
distribution network ensures a qualified customer advisory
service on the job and a fast and extensive after sales
service. Our quality assurance system for development,
production, sales and service is certified according to
DIN ISO 9001. Our customers set the scale for measuring
the quality of our products. Our task is to meet your
requirements, customer orientation as a Lenze principle
implies the best quality.

See for yourself.

 Product information G-motion

GÇÇmotion – News
The innovative geared motor programme with What is new?
intelligent speed variation.
Lenze gearboxes of the new generation have been – Torque increase 1
successfully used in industrial applications for many years. Low-profile gearbox sizes 09...14 2-stage
Our innovations permanently add market-oriented products Low-profile gearbox sizes 05...07 3-stage
to the gearbox programme. With various gearbox and Helical-bevel gearbox sizes 09...14 3-stage
motor options Lenze offers a complete and high-functional Helical-bevel gearbox sizes 05...07 4-stage
geared motor programme. The catalogue GÇÇmotion,
const informs about geared motors with constant output – Ratio extension i=5...8
speed and forms the basis for the GÇÇmotion program- Helical-worm gearbox sizes 04...07
me. Drives from 0.12 to 45 kW can be selected from clearly
structured selection tables. – Motor frame size 90
Helical gearbox size 04
Low-profile gearbox size 04
GÇÇmotion programme
– Mounting flange 1D for standard motor 90 and 2D for
standard motor 80
Helical gearbox size 04
Low-profile gearbox size 04

– Starting efficiency
Helical-worm gearbox

– Foot mounting in position 4

Low-profile gearbox sizes 04...14

– Information on gearbox ventilation

GÇÇmotion, const
Geared motors and gearboxes with constant output speeds
– Helical geared motors
– Low-profile geared motors
– (Helical)-bevel geared motors
– Helical-worm geared motors

GÇÇmotion, motec GÇÇmotion, m-var

Geared motors with integrated 8200 motec frequency Geared motors with mechanical speed adjustment
inverter – Planetary speed drives
– Helical geared motors – Variable speed belt drives
– Low-profile geared motors – Variable speed pulleys
– (Helical)-bevel geared motors
– Helical-worm geared motors

Lenze 1-7
 ] [kW]
List of abbreviations
[V
P M
[N

n1
m
]

Abbreviations used in this catalogue:

 Angle of radial force Mrated [Nm] Rated torque

MA [Nm] Starting torque of motor
1 c Capacity of gearboxes / geared motors MB [Nm] Holding torque of brake
Mcon [Nm] Continuous torque
dw [mm] Effective diameter of transmission Mstall [Nm] Stall torque of motor
element MI Maximum torque factor
Mmax [Nm] Maximum torque
cos  Power factor of the motor Mperm [Nm] Permissible torque
cosrated Power factor of asynchronous motors
n1 [min-1] Input speed
Fa [N] Applied axial force n2 [min-1] Output speed
Fa perm [N] Permissible axial force nrated [min-1] Rated speed
Fa tab [N] Table value of axial force nmax [min-1] Maximum speed
fch [kHz] Chopper frequency
fd [Hz] Field frequency P1 [kW] Input power
FI Mass acceleration factor P2 [kW] Output power
fmax [Hz] Set maximum frequency Prated [kW] Rated power
frated [Hz] Rated frequency Ploss [kW] Power loss of inverter
Fr [N] Applied radial force
Fr Tab [N] Table value of radial force R [Ω] Resistance
Fr perm [N] Permissible radial force
fw Load position factor of applied radial Srated [kW] Output power of inverter
force
f Effective direction factor of applied radial Tamb [°C] Ambient temperature during operation
force
fz Additional radial force factor of VG [V] DC bus voltage
transmission element Vrated [V] Rated voltage
Vmains [V] Mains voltage
i Ratio
 Ratio step
 Mechanical efficiency IP International protection code
I0 [A] Standstill continuous current
IA [A] Starting current IEC International Electrotechnical
Imax [A] Maximum output current Commission
Irated [A] Rated current
Imains [A] Rated mains current DIN Deutsches Institut für Normung

Jext [kgm2] Moment of inertia of machine VDE Verband deutscher Elektrotechniker

to be driven reduced to motor shaft
Jload [kgm2] Machine torque USDA United States Department of Agriculture

Jmot [kgm2] Moment of inertia of motor NEMA National Electrical Manufacturers

JA [kgm2] Moment of inertia of drive Association
reduced to input shaft
JB [kgm2] Moment of inertia of brake AC Alternating current
DC Direct current
k Operating factor
(according to DIN 3990) EMC Electromagnetic compatibility

L [mH] Inductance EN European Standard

m [kg] Mass CE Communauté Européene

M0 [Nm] Standstill continuous torque
M1 [Nm] Input torque IM International Mounting Code
M2 [Nm] Output torque

1-8 Lenze
 [kW]

]
Definitions

[V
P M
Basics about the data indicated in this catalog

[N
n1

m
]
Power, torque and speed Load capacity c of the gearboxes
The powers, torques and speeds incidated in this catalog Characteristic value for the load capacity of Lenze gearboxes
are rounded values and are valid for and geared motors.
• operating time/day = 8 h (100% duty time) – c is the ratio between the permissible rated torque of
• load class I with 10 switching operations/h the gearbox and the actual rated torque of the drive 1
• mounting positions indicated in this catalog components (e.g. of the integrated Lenze motor).
• standard lubricants – c must always be higher than the operating factor k
• fmains = 50 Hz constant calculated for your application.
• Tamb = 20 °C for gearboxes
40 °C for motors (to VDE 0530) Operating factor k (to DIN 3990)
• installation height < = 1000 m a.m.s.l. Takes account of the influence of effective temporarily
The rated power indicated for motors and geared motors changing loads during the planned running time of gear-
is valid for duty type S1 to boxes and geared motors.
VDE 0530 part 1 / DIN 57530 part 1. k depends on
The indicated values may change under other application – the type of load
conditions. – the intensity of load
Please contact your nearest Lenze respresentative for – temporal influences
information about operation under extreme application
conditions.

Lenze 1-9
 i
Order information

We want to deliver quickly and correctly. For this, we need

complete order information.
The following checklist and the chapter “How to order” will
help you.
1
Checklist Delivery
For fast and correct delivery we need the following • All components are carefully packed and checked
information: before delivery.

• Your address and your order data. • Orders are subject to the general terms of sale and
delivery of Lenze GmbH & Co KG:
• Our product key of the products listed in this catalog.
– Terms of delivery: Ex works according to your packing
• Your delivery data, for instance delivery date and requirements, packing not included.
delivery address.

How to order
Please use the following step-by-step checklist to find out
all information required for your order. Ordering of your tailor-
made drive is then very easy:

• Copy the order form which you

find on the last page of this catalog.

• Enter the order data.

• Send or fax the order form to your nearest Lenze branch

office or representative.
You will find a list of all Lenze branch offices and repre-
sentatives on the last pages.

1-10 Lenze
 i
Order information

Step-by-step to your drive

➜ Cross reference
➪ Information 1

1. Select drive system 4. Select position of system modules and

➜ Chapter Selection mounting position
➪ Gearbox size, ratio step, ratio ➜ Product key
Example: GST 07-2 Example:
i = 56.250 Terminal box in position 5
Mounting position A
2. Select input design
➜ Product key, selection table 5. Select colour
➪ Design, drive size ➜ Example:
Example: M 090-12 Top coat RAL 9018
(without options)
6. Options
3. Select output design ➜ Options
➜ Product key, system overview
➪ Design, drive size
Example: Solid shaft: V
Housing with foot: B
Output without flange: R

Pcs. Price per unit

i= 56.250

X GST 1 A
M V R
Motor frame size / Drive size
GFL 2 B
0 7 - N H K 0 9 0 - 1 2
GKS 3 C
W S L
GSS 4 D

Further order information for geared motors/gearboxes GÇÇ

H K L
Dimensions Hollow shaft dH7 = mm Flange a2 = mm

Position of system modules Shaft Flange Terminal box

(enter 0 for positions
not determined)
0 1 3 5 6 0 3 5 6 0 2 3 4 5

Mounting position A B C D E F

Colour X Top coat RAL 9018 Primary coat grey

Options for geared motor / gearbox GÇÇ

Options for motors

Lenze 1-11
5
(Helical)-bevel gearboxes

Technical data Dimensions

Permissible radial and axial forces at the output____5-2 Geared motors __________________________________5-82
Permissible radial and axial forces at the input _____5-6 Gearboxes with mounting flange for IEC standard
Backlash in angular minutes at the output _________5-7 motors _________________________________________5-98
Gearboxes with free input shaft _________________5-110
More dimensions
Rubber buffer for torque plate _________________5-112
Selection tables Torque plate at housing foot___________________5-113
Torque plate at pitch circle ____________________5-114
Geared motors ___________________________________5-8 Hollow shaft with shrink disc __________________5-116
Gearboxes with mounting flange for IEC standard Jet-proof hollow shaft protection cover _________5-117
motors _________________________________________ 5-38 with 2nd output shaft end _____________________5-118
Gearboxes with free input shaft __________________5-61 Mounting kit for hollow shaft retention __________5-119
Design proposal for auxiliary tools______________5-119

Weights
_______________________________________________5-120

Lenze 5-1
 Technical data – (Helical)-bevel gearboxes
Permissible radial and axial forces at the output

Bevel gearboxes GKRÇÇ

– Permissible radial force
Fr perm = fw · f · Fr tab ≤ fw · Fr max

– Permissible axial force

Fa perm = Fa tab at Fr = 0

Contact Lenze if Fr and Fa ( 0

f Effective direction factor at the output shaft fw Additional load factor at the output shaft

CW rotation
Design VÇÇ

Design HÇÇ

1,1 CCW rotation

5-2 Lenze
 Technical data – (Helical)-bevel gearboxes
Permissible radial and axial forces at the output

Bevel gearboxes GKRÇÇ

HÇÇ/SÇÇ VÇÇ
Hollow shaft and hollow shaft with shrink disc Solid shaft
GKR 04 Fr: acts on the hollow shaft (x = 0) Fr acts on the midpoint of the shaft extension (x = l/2)
Fa tab only valid for Fr = 0 Fa tab only valid for Fr = 0
n2 Fr tab Fa tab Fr tab Fa tab
[min-1] [N] [N] [N] [N]
400 2550 1275 2100 1275
250 3000 1500 2500 1500
160 3300 1650 2700 1650
100 3600 1800 3000 1800
63 3600 1800 3000 1800
40 3600 1800 3000 1800
25 3600 1800 3000 1800
16 3600 1800 3000 1800
max. 3600 1800 3000 1800

Lenze 5-3
 Technical data – (Helical)-bevel gearboxes
Permissible radial and axial forces at the output

Helical bevel gearbox GKSÇÇ

– Permissible radial force
Fr perm = fw · f · Fr tab ≤ fw · Fr max

– Permissible axial force

Fa perm = Fa tab at Fr = 0

Contact Lenze if Fr and Fa ( 0

f Effective direction factor at the output shaft fw Additional load factor at the output shaft
1.4

1.3
Design V_R
1.2 Ausführung V_R
CW rotation
1.1

1
Design V_KV_K
Ausführung
fw

0.9

CCW rotation 0.8

0.7 Design H_ H__

Ausführung

0.6

0.5
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
x/l

5-4 Lenze
 Technical data – (Helical)-bevel gearboxes
Permissible radial and axial forces at the output

Helical-bevel gearbox GKSÇÇ

Solid shaft with flange
VAK Frtab acts on the middlepoint of the shaft extension (x = l/2)
Fatab only valid for Fr =0
n2 GKS 04 GKS 05 GKS 06 GKS 07 GKS 09 GKS 11 GKS 14
[min-1] Fr tab Fa tab Fr tab Fa tab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab
[N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N]
400 3800 4200 4640 3630 6400 4660 7000 5700 9900 6000 14500 7000 20500 8400
250 4300 4400 5420 4440 7500 5880 8250 7000 10500 6600 16000 7500 23700 10000
160 4600 4400 6280 5420 8800 7320 9630 8500 12000 7600 17600 8500 27200 11500
100 4600 4400 7000 6600 9800 9230 11000 10400 14000 10000 21000 10500 31300 13000
63 4600 4400 7000 6600 10000 10000 13000 11500 15000 12000 24500 13000 35000 15000
40 4600 4400 7000 6600 10000 10000 14000 11500 15000 15000 28000 17500 41000 19000
25 4600 4400 7000 6600 10000 10000 14000 11500 15000 17000 30000 27000 43000 28000
≤ 16 4600 4400 7000 6600 10000 10000 14000 11500 15000 17000 30000 27000 43000 35000
Fr max 4600 - 7000 - 10000 - 14000 - 15000 - 30000 - 43000 -

Solid shaft without flange

VÇR Frtab acts on the middle of the shaft extension (x = l/2)
Fatab only valid for Fr =0
n2 GKS 04 GKS 05 GKS 06 GKS 07 GKS 09* GKS 11* GKS 14
[min-1] Fr tab Fa tab Fr tab Fa tab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab
[N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N]
400 3000 4200 2800 3500 3700 4440 4000 4900 6200 6500 7100 7000 57900 35000
5
250 3400 5000 3200 4240 4300 5580 4900 6230 6400 7400 7500 8000 61000 35000
160 3600 5500 3600 5090 4900 6930 5800 7820 7100 8000 8200 9200 64100 35000
100 3600 5500 4100 6160 5300 8710 6600 9940 8400 10500 10000 12000 65000 35000
63 3600 5500 4900 6600 6200 10000 8000 12600 9500 13000 11200 14500 65000 35000
40 3600 5500 5800 6600 7900 10000 9600 14000 11800 17000 13000 18500 65000 35000
25 3600 5500 5800 6600 9000 10000 12000 14000 16000 21000 19000 27000 65000 35000
≤ 16 3600 5500 5800 6600 9000 10000 12000 14000 18000 21000 23000 27000 65000 35000
Fr max 3600 - 5800 - 9000 - 12000 - 18000 - 23000 - 65000 -

Hollow shaft and hollow shaft with shrink disc

HÇÇ
VCK Frtab acts on the face of the hollow shaft (x = 1/2)
S ÇÇ Fatab only valid for Fr =0
n2 GKS 04 GKS 05 GKS 06 GKS 07 GKS 09 GKS 11 GKS 14
[min-1] Fr tab Fa tab Fr tab Fa tab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab
[N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N]
400 3900 4200 3500 3500 4600 4440 5400 4900 7500 6500 9000 7000 15000 6000
250 4500 5000 4200 4240 5600 5580 6300 6230 8200 7400 10000 8000 15500 8000
160 5100 5500 4630 5090 6400 6930 7400 7820 9400 8000 11000 9200 16500 10000
100 5900 5500 5000 6160 7000 8710 8700 9940 10600 10500 14000 12000 17500 13000
63 6800 5500 6200 6600 8200 10000 10500 12600 12200 13000 16000 14500 18500 16000
40 7000 5500 7300 6600 10400 10000 12500 14000 15500 17000 18500 18500 21000 20000
25 7000 5500 7300 6600 12000 10000 15100 14000 21000 21000 25000 27000 28000 28000
≤ 16 7000 5500 7300 6600 12000 10000 16000 14000 24000 21000 30000 27000 40000 35000
Fr max 7000 - 7300 - 12000 - 16000 - 24000 - 30000 - 45000 -
* With design VÇR a reinforced output bearing available on request

Lenze 5-5
 Technische Daten Kegel(stirn)radgetriebe
Permissible radial and axial forces at the input

Helical-bevel gearbox GÇÇ

– Permissible radial force
Fr perm = fw · f · Fr tab ≤ fw · Fr max

– Permissible axial force

Fa perm = Fa tab at Fr = 0

Please contact Lenze if Fr and Fa ( 0

f Effective direction factor at the input shaft fw Additional load factor at the input shaft
5 1.8

1.7
CCW rotation
Drehrichtung links
1.6

1.5

1.4
fα

CW rotationrechts
Drehrichtung
1.3

1.2

1.1

1
0° 30° 60° 90° 120° 150° 180° 210° 240° 270° 300° 330° 360°
α

Fr acts on the middle of the shaft extension (x = l/2),

W Fatab only valid for Fr =0
n1 1A Drive size
[min-1] 1B 1C 1D 1E 1F 1G 1H 1K
Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab Frtab Fatab
[N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N] [N]
700 830 1200 1150 1400 1470 1500 2140 1600 3200 2800 4000 4500 5000 6000 8500 10000
1400 570 770 780 900 1000 740 1400 800 2200 1700 3200 2000 4000 2500 7000 5300
2800 440 530 590 620 770 470 940 460 1700 1100 2300 1600 3000 2000 5000 350
Fmax 1850 – 1650 – 3000 – 4900 – 5600 – 8000 – 10000 – 12000 –

5-6 Lenze
 Technical data – (Helical)-bevel gearboxes
Backlash at the output in angular minutes

Bevel gearbox GKR 04-2

15
Backlash at the output

14

13

12
5 10 15 20 25 30 35 40 45 50 55 60 65

Ratio

Helical-bevel gearbox GKSÇÇ-3

28
26
24
22
Backlash at the output

20
18
16 5
GKS04-3
14
GKS05-3
12
GKS06-3
10
GKS07-3
8 GKS09-3
GKS11-3
GKS14-3
6
4
5 7.1 9 11.2 14 18 22.5 28 35.5 45 56 71 90 112 140 180 224 280 400
Ratio

Helical-bevel gearbox GKSÇÇ-4

18

16
Backlash at the output

14 GKS05-4

12 GKS06-4

10 GKS07-4

8 GKS09-4
GKS11-4
6 GKS14-4

4
100 125 160 200 250 315 400 500 630 800 1000 1250 1800
Ratio

Lenze 5-7
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.12 kW GKR ÇÇ -2M 5-82

n1=1390 121 9 5.3 11.449 GKR04 - 2MÇÇÇ 063-12
110 10 4.9 12.698 GKR04 - 2MÇÇÇ 063-12
95 11 4.9 14.603 GKR04 - 2MÇÇÇ 063-12
71 15 5.4 19.556 GKR04 - 2MÇÇÇ 063-12
62 18 5.1 22.489 GKR04 - 2MÇÇÇ 063-12
55 20 4.5 25.185 GKR04 - 2MÇÇÇ 063-12
48 23 4.0 28.963 GKR04 - 2MÇÇÇ 063-12
44 25 3.6 31.919 GKR04 - 2MÇÇÇ 063-12
38 29 3.1 36.707 GKR04 - 2MÇÇÇ 063-12
35 31 2.9 40.000 GKR04 - 2MÇÇÇ 063-12
30 36 2.5 46.000 GKR04 - 2MÇÇÇ 063-12
26 41 1.7 52.698 GKR04 - 2MÇÇÇ 063-12
23 48 1.7 60.603 GKR04 - 2MÇÇÇ 063-12

GKS ÇÇ -3M 5-86

141 8 5.3 9.836 GKS04 - 3MÇÇÇ 063-12
62 18 5.3 22.522 GKS04 - 3MÇÇÇ 063-12
55 20 5.3 25.088 GKS04 - 3MÇÇÇ 063-12
5 48 23 4.9 28.727 GKS04 - 3MÇÇÇ 063-12
43 25 4.9 32.000 GKS04 - 3MÇÇÇ 063-12
31 35 5.3 44.240 GKS04 - 3MÇÇÇ 063-12
27 40 4.6 50.943 GKS04 - 3MÇÇÇ 063-12
24 45 4.2 56.976 GKS04 - 3MÇÇÇ 063-12
21 51 3.6 64.978 GKS04 - 3MÇÇÇ 063-12
19 57 3.4 72.210 GKS04 - 3MÇÇÇ 063-12
15 71 2.7 90.491 GKS04 - 3MÇÇÇ 063-12
14 78 2.4 100.067 GKS04 - 3MÇÇÇ 063-12
13 87 2.0 111.467 GKS04 - 3MÇÇÇ 063-12
11 101 1.9 128.874 GKS04 - 3MÇÇÇ 063-12
9.7 112 1.5 143.556 GKS04 - 3MÇÇÇ 063-12
8.5 128 1.5 163.332 GKS04 - 3MÇÇÇ 063-12
7.6 143 1.2 181.939 GKS04 - 3MÇÇÇ 063-12
6.8 160 1.2 204.682 GKS04 - 3MÇÇÇ 063-12
6.1 179 1.0 228.000 GKS04 - 3MÇÇÇ 063-12
5.2 211 0.9 269.660 GKS04 - 3MÇÇÇ 063-12

GKS ÇÇ -4M 5-94

4.4 244 2.9 316.800 GKS06 - 4MÇÇÇ 063-12
3.8 281 1.2 364.467 GKS05 - 4MÇÇÇ 063-12
3.9 278 1.9 361.429 GKS06 - 4MÇÇÇ 063-12
3.4 316 1.0 410.667 GKS05 - 4MÇÇÇ 063-12
3.4 314 2.2 408.000 GKS06 - 4MÇÇÇ 063-12
3.0 361 0.9 469.389 GKS05 - 4MÇÇÇ 063-12
3.0 353 1.5 458.067 GKS06 - 4MÇÇÇ 063-12

Thermal limit rating not considered (see page 2-7)

5-8 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.12 kW GKS ÇÇ -4M 5-94

n1=1390 2.7 398 1.8 517.091 GKS06 - 4MÇÇÇ 063-12
2.5 428 1.3 555.927 GKS06 - 4MÇÇÇ 063-12
2.2 493 1.4 640.800 GKS06 - 4MÇÇÇ 063-12
2.0 536 1.0 696.668 GKS06 - 4MÇÇÇ 063-12
1.7 625 1.1 812.137 GKS06 - 4MÇÇÇ 063-12
1.5 704 0.9 914.907 GKS06 - 4MÇÇÇ 063-12
1.4 783 0.9 1017.741 GKS06 - 4MÇÇÇ 063-12

0.18 kW GKR ÇÇ -2M 5-82

n1=2760 241 7 5.7 11.449 GKR04 - 2MÇÇÇ 063-11
217 8 5.3 12.698 GKR04 - 2MÇÇÇ 063-11
189 9 5.3 14.603 GKR04 - 2MÇÇÇ 063-11
141 12 5.8 19.556 GKR04 - 2MÇÇÇ 063-11

n1=1400 122 13 3.5 11.449 GKR04 - 2MÇÇÇ 063-32

110 15 3.3 12.698 GKR04 - 2MÇÇÇ 063-32
96 17 3.3 14.603 GKR04 - 2MÇÇÇ 063-32
72 23 3.6 19.556 GKR04 - 2MÇÇÇ 063-32
62 26 3.4 22.489 GKR04 - 2MÇÇÇ 063-32 5
56 29 3.0 25.185 GKR04 - 2MÇÇÇ 063-32
48 34 2.7 28.963 GKR04 - 2MÇÇÇ 063-32
44 37 2.4 31.919 GKR04 - 2MÇÇÇ 063-32
38 43 2.1 36.707 GKR04 - 2MÇÇÇ 063-32
35 47 1.9 40.000 GKR04 - 2MÇÇÇ 063-32
30 54 1.7 46.000 GKR04 - 2MÇÇÇ 063-32
27 62 1.1 52.698 GKR04 - 2MÇÇÇ 063-32
23 71 1.1 60.603 GKR04 - 2MÇÇÇ 063-32

n1=870 22 75 1.2 40.000 GKR04 - 2MÇÇÇ 071-13

19 86 1.0 46.000 GKR04 - 2MÇÇÇ 071-13

GKS ÇÇ -3M 5-86

n1=2760 281 6 5.7 9.836 GKS04 - 3MÇÇÇ 063-11
123 13 5.7 22.522 GKS04 - 3MÇÇÇ 063-11
110 15 5.7 25.088 GKS04 - 3MÇÇÇ 063-11
96 17 5.3 28.727 GKS04 - 3MÇÇÇ 063-11
86 19 5.3 32.000 GKS04 - 3MÇÇÇ 063-11

n1=1400 62 26 3.5 22.522 GKS04 - 3MÇÇÇ 063-32

56 29 3.5 25.088 GKS04 - 3MÇÇÇ 063-32
49 34 3.3 28.727 GKS04 - 3MÇÇÇ 063-32
44 37 3.3 32.000 GKS04 - 3MÇÇÇ 063-32
32 52 3.6 44.240 GKS04 - 3MÇÇÇ 063-32

Thermal limit rating not considered (see page 2-7)

Lenze 5-9
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.18 kW GKS ÇÇ -3M 5-86

n1=1400 28 59 3.1 50.943 GKS04 - 3MÇÇÇ 063-32
25 66 2.8 56.976 GKS04 - 3MÇÇÇ 063-32
22 76 2.4 64.978 GKS04 - 3MÇÇÇ 063-32
19 84 2.3 72.210 GKS04 - 3MÇÇÇ 063-32
16 106 1.8 90.491 GKS04 - 3MÇÇÇ 063-32
14 117 1.6 100.067 GKS04 - 3MÇÇÇ 063-32
13 130 1.3 111.467 GKS04 - 3MÇÇÇ 063-32
11 150 1.2 128.874 GKS04 - 3MÇÇÇ 063-32
9.8 167 1.0 143.556 GKS04 - 3MÇÇÇ 063-32
8.6 191 1.0 163.332 GKS04 - 3MÇÇÇ 063-32
7.7 212 0.8 181.939 GKS04 - 3MÇÇÇ 063-32

GKS ÇÇ -4M 5-94

6.7 240 1.3 209.067 GKS05 - 4MÇÇÇ 063-32
6.2 259 1.0 225.867 GKS05 - 4MÇÇÇ 063-32
6.2 257 2.1 224.524 GKS06 - 4MÇÇÇ 063-32
5.9 271 1.2 236.667 GKS05 - 4MÇÇÇ 063-32
5.0 320 1.7 279.286 GKS06 - 4MÇÇÇ 063-32

5 4.4 363 1.9 316.800 GKS06 - 4MÇÇÇ 063-32

3.9 414 1.3 361.429 GKS06 - 4MÇÇÇ 063-32
3.4 468 1.5 408.000 GKS06 - 4MÇÇÇ 063-32
3.1 525 1.0 458.067 GKS06 - 4MÇÇÇ 063-32
2.7 593 1.2 517.091 GKS06 - 4MÇÇÇ 063-32
2.5 637 0.8 555.927 GKS06 - 4MÇÇÇ 063-32
2.2 735 1.0 640.800 GKS06 - 4MÇÇÇ 063-32

n1=870 1.9 857 1.2 464.367 GKS07 - 4MÇÇÇ 071-13

1.7 953 1.4 516.810 GKS07 - 4MÇÇÇ 071-13
1.5 1040 1.0 563.573 GKS07 - 4MÇÇÇ 071-13
1.4 1174 1.1 636.581 GKS07 - 4MÇÇÇ 071-13
1.3 1262 0.8 683.972 GKS07 - 4MÇÇÇ 071-13
1.1 1520 0.9 823.810 GKS07 - 4MÇÇÇ 071-13
1.1 1508 2.0 817.551 GKS09 - 4MÇÇÇ 071-13
0.9 1700 1.8 921.367 GKS09 - 4MÇÇÇ 071-13
0.9 1830 1.7 992.209 GKS09 - 4MÇÇÇ 071-13
0.8 2063 1.5 1118.204 GKS09 - 4MÇÇÇ 071-13
0.7 2314 1.3 1254.197 GKS09 - 4MÇÇÇ 071-13
0.6 2608 1.2 1413.461 GKS09 - 4MÇÇÇ 071-13

0.25 kW GKR ÇÇ -2M 5-82

n1=1400 270 8 5.8 5.185 GKR04 - 2MÇÇÇ 071-12
235 10 5.8 5.963 GKR04 - 2MÇÇÇ 071-12
197 12 5.8 7.111 GKR04 - 2MÇÇÇ 071-12
171 13 5.8 8.178 GKR04 - 2MÇÇÇ 071-12

Thermal limit rating not considered (see page 2-7)

5-10 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.25 kW GKR ÇÇ -2M 5-82

n1=1400 154 15 5.7 9.101 GKR04 - 2MÇÇÇ 071-12
134 17 5.2 10.466 GKR04 - 2MÇÇÇ 071-12
122 19 4.9 11.449 GKR04 - 2MÇÇÇ 071-12
110 21 4.4 12.698 GKR04 - 2MÇÇÇ 071-12
96 24 3.8 14.603 GKR04 - 2MÇÇÇ 071-12
90 25 3.6 15.556 GKR04 - 2MÇÇÇ 071-12
78 29 3.1 17.889 GKR04 - 2MÇÇÇ 071-12
72 32 2.8 19.556 GKR04 - 2MÇÇÇ 071-12
62 36 2.5 22.489 GKR04 - 2MÇÇÇ 071-12
56 41 2.2 25.185 GKR04 - 2MÇÇÇ 071-12
48 47 1.9 28.963 GKR04 - 2MÇÇÇ 071-12
44 52 1.7 31.919 GKR04 - 2MÇÇÇ 071-12
38 60 1.5 36.707 GKR04 - 2MÇÇÇ 071-12
35 65 1.4 40.000 GKR04 - 2MÇÇÇ 071-12
30 75 1.2 46.000 GKR04 - 2MÇÇÇ 071-12

n1=920 25 91 1.0 36.707 GKR04 - 2MÇÇÇ 071-33

23 99 0.9 40.000 GKR04 - 2MÇÇÇ 071-33 5
GKS ÇÇ -3M 5-86
n1=2760 281 8 4.1 9.836 GKS04 - 3MÇÇÇ 063-31

n1=1400 273 8 5.8 5.123 GKS04 - 3MÇÇÇ 071-12

199 11 5.8 7.025 GKS04 - 3MÇÇÇ 071-12
171 13 5.8 8.167 GKS04 - 3MÇÇÇ 071-12
156 15 6.7 8.991 GKS04 - 3MÇÇÇ 071-12
142 16 6.6 9.836 GKS04 - 3MÇÇÇ 071-12
119 19 5.8 11.730 GKS04 - 3MÇÇÇ 071-12
107 21 5.8 13.067 GKS04 - 3MÇÇÇ 071-12
98 23 6.7 14.333 GKS04 - 3MÇÇÇ 071-12
87 26 5.8 16.087 GKS04 - 3MÇÇÇ 071-12
78 29 5.7 17.920 GKS04 - 3MÇÇÇ 071-12
68 33 5.5 20.588 GKS04 - 3MÇÇÇ 071-12
62 37 5.0 22.522 GKS04 - 3MÇÇÇ 071-12
56 41 4.1 25.088 GKS04 - 3MÇÇÇ 071-12
49 47 3.9 28.727 GKS04 - 3MÇÇÇ 071-12
44 52 3.2 32.000 GKS04 - 3MÇÇÇ 071-12
40 57 3.2 35.191 GKS04 - 3MÇÇÇ 071-12
36 64 2.7 39.200 GKS04 - 3MÇÇÇ 071-12
32 72 2.6 44.240 GKS04 - 3MÇÇÇ 071-12
28 83 2.2 50.943 GKS04 - 3MÇÇÇ 071-12
25 92 2.0 56.976 GKS04 - 3MÇÇÇ 071-12
22 105 1.7 64.978 GKS04 - 3MÇÇÇ 071-12
21 108 3.1 66.592 GKS05 - 3MÇÇÇ 071-12

Thermal limit rating not considered (see page 2-7)

Lenze 5-11
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.25 kW GKS ÇÇ -3M 5-86

n1=1400 19 117 1.6 72.210 GKS04 - 3MÇÇÇ 071-12
19 122 2.6 75.033 GKS05 - 3MÇÇÇ 071-12
18 129 1.4 79.598 GKS04 - 3MÇÇÇ 071-12
17 134 2.5 82.833 GKS05 - 3MÇÇÇ 071-12
16 147 1.3 90.491 GKS04 - 3MÇÇÇ 071-12
15 151 2.1 93.333 GKS05 - 3MÇÇÇ 071-12
14 162 1.1 100.067 GKS04 - 3MÇÇÇ 071-12
13 174 1.9 107.196 GKS05 - 3MÇÇÇ 071-12
13 181 0.9 111.467 GKS04 - 3MÇÇÇ 071-12
12 196 1.6 120.784 GKS05 - 3MÇÇÇ 071-12
11 209 0.9 128.874 GKS04 - 3MÇÇÇ 071-12
11 211 1.6 130.097 GKS05 - 3MÇÇÇ 071-12
11 206 3.1 127.392 GKS06 - 3MÇÇÇ 071-12
9.6 237 1.3 146.588 GKS05 - 3MÇÇÇ 071-12
9.8 232 3.0 142.941 GKS06 - 3MÇÇÇ 071-12
8.4 269 1.2 166.276 GKS05 - 3MÇÇÇ 071-12
8.7 261 2.4 161.029 GKS06 - 3MÇÇÇ 071-12
7.5 304 1.0 187.353 GKS05 - 3MÇÇÇ 071-12
7.4 308 2.3 190.080 GKS06 - 3MÇÇÇ 071-12
6.6 342 0.9 211.200 GKS05 - 3MÇÇÇ 071-12
6.5 347 1.8 214.133 GKS06 - 3MÇÇÇ 071-12
6.1 374 1.9 230.688 GKS06 - 3MÇÇÇ 071-12
5 5.4 421 1.5 259.880 GKS06 - 3MÇÇÇ 071-12
4.8 472 1.5 291.600 GKS06 - 3MÇÇÇ 071-12
4.3 532 1.2 328.500 GKS06 - 3MÇÇÇ 071-12

GKS ÇÇ -4M 5-94

3.9 576 0.9 361.429 GKS06 - 4MÇÇÇ 071-12
3.9 571 1.8 358.829 GKS07 - 4MÇÇÇ 071-12
3.4 650 1.1 408.000 GKS06 - 4MÇÇÇ 071-12
3.5 636 2.1 399.353 GKS07 - 4MÇÇÇ 071-12
3.0 739 1.4 464.367 GKS07 - 4MÇÇÇ 071-12
2.7 823 0.9 517.091 GKS06 - 4MÇÇÇ 071-12
2.7 823 1.6 516.810 GKS07 - 4MÇÇÇ 071-12
2.5 897 1.2 563.573 GKS07 - 4MÇÇÇ 071-12
2.2 1014 1.3 636.581 GKS07 - 4MÇÇÇ 071-12
2.1 1089 1.0 683.972 GKS07 - 4MÇÇÇ 071-12
1.7 1312 1.0 823.810 GKS07 - 4MÇÇÇ 071-12
1.7 1302 2.3 817.551 GKS09 - 4MÇÇÇ 071-12
1.5 1478 0.8 928.237 GKS07 - 4MÇÇÇ 071-12
1.5 1467 2.1 921.367 GKS09 - 4MÇÇÇ 071-12
1.4 1592 0.8 999.806 GKS07 - 4MÇÇÇ 071-12
1.4 1580 1.9 992.209 GKS09 - 4MÇÇÇ 071-12
1.3 1780 1.7 1118.204 GKS09 - 4MÇÇÇ 071-12
1.1 1997 1.5 1254.197 GKS09 - 4MÇÇÇ 071-12
1.0 2251 1.4 1413.461 GKS09 - 4MÇÇÇ 071-12

n1=920 0.9 2404 1.3 992.209 GKS09 - 4MÇÇÇ 071-33

0.8 2709 1.1 1118.204 GKS09 - 4MÇÇÇ 071-33

Thermal limit rating not considered (see page 2-7)

5-12 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.25 kW GKS ÇÇ -4M 5-94

n1=920 0.7 3039 1.0 1254.197 GKS09 - 4MÇÇÇ 071-33
0.7 3425 0.9 1413.461 GKS09 - 4MÇÇÇ 071-33

0.37 kW GKR ÇÇ -2M 5-82

n1=2840 548 6 6.4 5.185 GKR04 - 2MÇÇÇ 071-11
476 7 6.4 5.963 GKR04 - 2MÇÇÇ 071-11
399 8 6.4 7.111 GKR04 - 2MÇÇÇ 071-11
347 10 6.4 8.178 GKR04 - 2MÇÇÇ 071-11
312 11 6.3 9.101 GKR04 - 2MÇÇÇ 071-11
271 12 5.8 10.466 GKR04 - 2MÇÇÇ 071-11
248 14 5.4 11.449 GKR04 - 2MÇÇÇ 071-11

n1=1400 235 14 3.9 5.963 GKR04 - 2MÇÇÇ 071-32

197 17 3.9 7.111 GKR04 - 2MÇÇÇ 071-32
171 20 3.9 8.178 GKR04 - 2MÇÇÇ 071-32
154 22 3.9 9.101 GKR04 - 2MÇÇÇ 071-32
134 25 3.5 10.466 GKR04 - 2MÇÇÇ 071-32
122 28 3.3 11.449 GKR04 - 2MÇÇÇ 071-32
110 30 3.0 12.698 GKR04 - 2MÇÇÇ 071-32 5
96 35 2.6 14.603 GKR04 - 2MÇÇÇ 071-32
90 37 2.4 15.556 GKR04 - 2MÇÇÇ 071-32
78 43 2.1 17.889 GKR04 - 2MÇÇÇ 071-32
72 47 1.9 19.556 GKR04 - 2MÇÇÇ 071-32
62 54 1.7 22.489 GKR04 - 2MÇÇÇ 071-32
56 60 1.5 25.185 GKR04 - 2MÇÇÇ 071-32
48 69 1.3 28.963 GKR04 - 2MÇÇÇ 071-32
44 77 1.2 31.919 GKR04 - 2MÇÇÇ 071-32
38 88 1.0 36.707 GKR04 - 2MÇÇÇ 071-32
35 96 0.9 40.000 GKR04 - 2MÇÇÇ 071-32
30 110 0.8 46.000 GKR04 - 2MÇÇÇ 071-32

GKS ÇÇ -3M 5-86

n1=2840 554 6 6.4 5.123 GKS04 - 3MÇÇÇ 071-11
404 8 6.4 7.025 GKS04 - 3MÇÇÇ 071-11
348 10 6.4 8.167 GKS04 - 3MÇÇÇ 071-11
316 11 7.4 8.991 GKS04 - 3MÇÇÇ 071-11
289 12 7.4 9.836 GKS04 - 3MÇÇÇ 071-11
242 14 6.4 11.730 GKS04 - 3MÇÇÇ 071-11
217 15 6.4 13.067 GKS04 - 3MÇÇÇ 071-11

n1=1400 199 17 3.9 7.025 GKS04 - 3MÇÇÇ 071-32

171 20 3.9 8.167 GKS04 - 3MÇÇÇ 071-32
156 22 4.5 8.991 GKS04 - 3MÇÇÇ 071-32
142 24 4.5 9.836 GKS04 - 3MÇÇÇ 071-32

Thermal limit rating not considered (see page 2-7)

Lenze 5-13
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.37 kW GKS ÇÇ -3M 5-86

n1=1400 119 28 3.9 11.730 GKS04 - 3MÇÇÇ 071-32
107 31 3.9 13.067 GKS04 - 3MÇÇÇ 071-32
98 34 4.5 14.333 GKS04 - 3MÇÇÇ 071-32
87 39 3.9 16.087 GKS04 - 3MÇÇÇ 071-32
78 43 3.9 17.920 GKS04 - 3MÇÇÇ 071-32
68 49 3.7 20.588 GKS04 - 3MÇÇÇ 071-32
62 54 3.4 22.522 GKS04 - 3MÇÇÇ 071-32
56 60 2.8 25.088 GKS04 - 3MÇÇÇ 071-32
49 69 2.7 28.727 GKS04 - 3MÇÇÇ 071-32
44 77 2.2 32.000 GKS04 - 3MÇÇÇ 071-32
40 84 2.2 35.191 GKS04 - 3MÇÇÇ 071-32
36 94 1.8 39.200 GKS04 - 3MÇÇÇ 071-32
32 106 1.7 44.240 GKS04 - 3MÇÇÇ 071-32
30 113 2.7 47.059 GKS05 - 3MÇÇÇ 071-32
28 122 1.5 50.943 GKS04 - 3MÇÇÇ 071-32
25 137 1.4 56.976 GKS04 - 3MÇÇÇ 071-32
22 156 1.2 64.978 GKS04 - 3MÇÇÇ 071-32
21 160 2.1 66.592 GKS05 - 3MÇÇÇ 071-32
5 19 173 1.1 72.210 GKS04 - 3MÇÇÇ 071-32
19 180 1.7 75.033 GKS05 - 3MÇÇÇ 071-32
18 191 1.0 79.598 GKS04 - 3MÇÇÇ 071-32
17 199 1.7 82.833 GKS05 - 3MÇÇÇ 071-32
16 217 0.9 90.491 GKS04 - 3MÇÇÇ 071-32
15 224 1.4 93.333 GKS05 - 3MÇÇÇ 071-32
15 223 3.1 93.176 GKS06 - 3MÇÇÇ 071-32
13 257 1.3 107.196 GKS05 - 3MÇÇÇ 071-32
13 252 2.5 104.967 GKS06 - 3MÇÇÇ 071-32
12 290 1.1 120.784 GKS05 - 3MÇÇÇ 071-32
12 271 2.6 113.082 GKS06 - 3MÇÇÇ 071-32
11 312 1.1 130.097 GKS05 - 3MÇÇÇ 071-32
11 305 2.1 127.392 GKS06 - 3MÇÇÇ 071-32
9.6 351 0.9 146.588 GKS05 - 3MÇÇÇ 071-32
9.8 343 2.1 142.941 GKS06 - 3MÇÇÇ 071-32
8.4 399 0.8 166.276 GKS05 - 3MÇÇÇ 071-32
8.7 386 1.6 161.029 GKS06 - 3MÇÇÇ 071-32
7.4 456 1.5 190.080 GKS06 - 3MÇÇÇ 071-32
6.5 513 1.2 214.133 GKS06 - 3MÇÇÇ 071-32
6.1 553 1.3 230.688 GKS06 - 3MÇÇÇ 071-32
5.4 623 1.0 259.880 GKS06 - 3MÇÇÇ 071-32
4.8 699 1.0 291.600 GKS06 - 3MÇÇÇ 071-32
4.3 788 0.8 328.500 GKS06 - 3MÇÇÇ 071-32

GKS ÇÇ -4M 5-94

3.9 846 1.3 358.829 GKS07 - 4MÇÇÇ 071-32
3.5 941 1.4 399.353 GKS07 - 4MÇÇÇ 071-32
3.0 1094 1.0 464.367 GKS07 - 4MÇÇÇ 071-32
2.7 1218 1.1 516.810 GKS07 - 4MÇÇÇ 071-32

Thermal limit rating not considered (see page 2-7)

5-14 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.37 kW GKS ÇÇ -4M 5-94

n1=1400 2.2 1500 0.9 636.581 GKS07 - 4MÇÇÇ 071-32
1.7 1927 1.6 817.551 GKS09 - 4MÇÇÇ 071-32
1.5 2171 1.4 921.367 GKS09 - 4MÇÇÇ 071-32
1.4 2338 1.3 992.209 GKS09 - 4MÇÇÇ 071-32
1.3 2635 1.2 1118.204 GKS09 - 4MÇÇÇ 071-32
1.1 2956 1.0 1254.197 GKS09 - 4MÇÇÇ 071-32
1.0 3331 0.9 1413.461 GKS09 - 4MÇÇÇ 071-32

n1=900 0.9 3637 0.8 992.209 GKS09 - 4MÇÇÇ 080-13

0.9 3632 1.7 990.879 GKS11 - 4MÇÇÇ 080-13
0.8 4093 1.5 1116.484 GKS11 - 4MÇÇÇ 080-13
0.7 4591 1.3 1252.516 GKS11 - 4MÇÇÇ 080-13
0.6 5173 1.2 1411.286 GKS11 - 4MÇÇÇ 080-13

0.55 kW GKR ÇÇ -2M 5-82

n1=2840 548 9 4.3 5.185 GKR04 - 2MÇÇÇ 071-31
476 11 4.3 5.963 GKR04 - 2MÇÇÇ 071-31
399 13 4.3 7.111 GKR04 - 2MÇÇÇ 071-31
347 14 4.3 8.178 GKR04 - 2MÇÇÇ 071-31 5
312 16 4.3 9.101 GKR04 - 2MÇÇÇ 071-31
271 18 3.9 10.466 GKR04 - 2MÇÇÇ 071-31
248 20 3.6 11.449 GKR04 - 2MÇÇÇ 071-31

n1=1400 235 21 3.4 5.963 GKR04 - 2MÇÇÇ 080-12

197 25 3.1 7.111 GKR04 - 2MÇÇÇ 080-12
171 29 2.8 8.178 GKR04 - 2MÇÇÇ 080-12
154 32 2.6 9.101 GKR04 - 2MÇÇÇ 080-12
134 37 2.4 10.466 GKR04 - 2MÇÇÇ 080-12
122 41 2.2 11.449 GKR04 - 2MÇÇÇ 080-12
110 45 2.0 12.698 GKR04 - 2MÇÇÇ 080-12
96 52 1.7 14.603 GKR04 - 2MÇÇÇ 080-12
90 55 1.6 15.556 GKR04 - 2MÇÇÇ 080-12
78 64 1.4 17.889 GKR04 - 2MÇÇÇ 080-12
72 70 1.3 19.556 GKR04 - 2MÇÇÇ 080-12
62 80 1.1 22.489 GKR04 - 2MÇÇÇ 080-12
56 90 1.0 25.185 GKR04 - 2MÇÇÇ 080-12
48 103 0.9 28.963 GKR04 - 2MÇÇÇ 080-12

n1=900 46 108 0.8 19.556 GKR04 - 2MÇÇÇ 080-33

GKS ÇÇ -3M 5-86

n1=2840 554 9 4.3 5.123 GKS04 - 3MÇÇÇ 071-31
404 12 4.3 7.025 GKS04 - 3MÇÇÇ 071-31
348 14 4.3 8.167 GKS04 - 3MÇÇÇ 071-31

Thermal limit rating not considered (see page 2-7)

Lenze 5-15
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.55 kW GKS ÇÇ -3M 5-86

n1=2840 316 16 5.0 8.991 GKS04 - 3MÇÇÇ 071-31
289 17 5.0 9.836 GKS04 - 3MÇÇÇ 071-31
242 21 4.3 11.730 GKS04 - 3MÇÇÇ 071-31
217 23 4.3 13.067 GKS04 - 3MÇÇÇ 071-31

n1=1400 199 25 3.7 7.025 GKS04 - 3MÇÇÇ 080-12

171 29 4.4 8.167 GKS04 - 3MÇÇÇ 080-12
156 32 3.2 8.991 GKS04 - 3MÇÇÇ 080-12
142 35 3.0 9.836 GKS04 - 3MÇÇÇ 080-12
119 42 4.3 11.730 GKS04 - 3MÇÇÇ 080-12
106 47 3.5 13.176 GKS05 - 3MÇÇÇ 080-12
98 51 3.2 14.333 GKS04 - 3MÇÇÇ 080-12
87 57 3.2 16.087 GKS04 - 3MÇÇÇ 080-12
78 64 2.6 17.920 GKS04 - 3MÇÇÇ 080-12
68 73 2.5 20.588 GKS04 - 3MÇÇÇ 080-12
62 80 2.3 22.522 GKS04 - 3MÇÇÇ 080-12
56 89 1.9 25.088 GKS04 - 3MÇÇÇ 080-12
49 102 1.8 28.727 GKS04 - 3MÇÇÇ 080-12
5 47 107 3.1 29.931 GKS05 - 3MÇÇÇ 080-12
44 114 1.5 32.000 GKS04 - 3MÇÇÇ 080-12
43 117 2.8 32.744 GKS05 - 3MÇÇÇ 080-12
40 125 1.5 35.191 GKS04 - 3MÇÇÇ 080-12
38 132 2.3 36.894 GKS05 - 3MÇÇÇ 080-12
36 140 1.2 39.200 GKS04 - 3MÇÇÇ 080-12
34 149 2.2 41.765 GKS05 - 3MÇÇÇ 080-12
32 158 1.2 44.240 GKS04 - 3MÇÇÇ 080-12
30 168 1.8 47.059 GKS05 - 3MÇÇÇ 080-12
28 182 1.0 50.943 GKS04 - 3MÇÇÇ 080-12
27 182 1.8 51.162 GKS05 - 3MÇÇÇ 080-12
25 203 0.9 56.976 GKS04 - 3MÇÇÇ 080-12
24 205 1.5 57.647 GKS05 - 3MÇÇÇ 080-12
21 237 1.4 66.592 GKS05 - 3MÇÇÇ 080-12
22 232 2.7 65.207 GKS06 - 3MÇÇÇ 080-12
19 267 1.2 75.033 GKS05 - 3MÇÇÇ 080-12
19 257 2.7 72.000 GKS06 - 3MÇÇÇ 080-12
17 295 1.1 82.833 GKS05 - 3MÇÇÇ 080-12
17 289 2.2 81.111 GKS06 - 3MÇÇÇ 080-12
15 333 1.0 93.333 GKS05 - 3MÇÇÇ 080-12
15 332 2.1 93.176 GKS06 - 3MÇÇÇ 080-12
13 382 0.9 107.196 GKS05 - 3MÇÇÇ 080-12
13 374 1.7 104.967 GKS06 - 3MÇÇÇ 080-12
12 403 1.7 113.082 GKS06 - 3MÇÇÇ 080-12
11 454 1.4 127.392 GKS06 - 3MÇÇÇ 080-12
11 451 2.7 126.578 GKS07 - 3MÇÇÇ 080-12
9.8 509 1.4 142.941 GKS06 - 3MÇÇÇ 080-12
8.7 574 1.1 161.029 GKS06 - 3MÇÇÇ 080-12
7.4 677 1.0 190.080 GKS06 - 3MÇÇÇ 080-12
7.6 658 2.0 184.600 GKS07 - 3MÇÇÇ 080-12

Thermal limit rating not considered (see page 2-7)

5-16 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.55 kW GKS ÇÇ -3M 5-86

n1=1400 6.5 763 0.8 214.133 GKS06 - 3MÇÇÇ 080-12
6.7 741 1.6 208.000 GKS07 - 3MÇÇÇ 080-12
6.1 822 0.9 230.688 GKS06 - 3MÇÇÇ 080-12
6.3 798 1.7 224.037 GKS07 - 3MÇÇÇ 080-12
5.6 900 1.4 252.436 GKS07 - 3MÇÇÇ 080-12
4.9 1009 1.3 283.193 GKS07 - 3MÇÇÇ 080-12
4.4 1137 1.1 319.091 GKS07 - 3MÇÇÇ 080-12

GKS ÇÇ -4M 5-94

3.9 1257 0.8 358.829 GKS07 - 4MÇÇÇ 080-12
3.8 1277 2.4 364.427 GKS09 - 4MÇÇÇ 080-12
3.5 1399 0.9 399.353 GKS07 - 4MÇÇÇ 080-12
3.5 1409 2.2 402.234 GKS09 - 4MÇÇÇ 080-12
3.1 1588 1.9 453.311 GKS09 - 4MÇÇÇ 080-12
2.7 1823 1.7 520.538 GKS09 - 4MÇÇÇ 080-12
2.4 2055 1.5 586.638 GKS09 - 4MÇÇÇ 080-12
2.2 2213 1.4 631.744 GKS09 - 4MÇÇÇ 080-12
2.0 2494 1.2 711.965 GKS09 - 4MÇÇÇ 080-12
1.7 2864 1.1 817.551 GKS09 - 4MÇÇÇ 080-12
1.7 2860 2.1 816.455 GKS11 - 4MÇÇÇ 080-12
1.5 3227 1.0 921.367 GKS09 - 4MÇÇÇ 080-12 5
1.5 3222 1.9 919.949 GKS11 - 4MÇÇÇ 080-12
1.4 3476 0.9 992.209 GKS09 - 4MÇÇÇ 080-12
1.4 3471 1.7 990.879 GKS11 - 4MÇÇÇ 080-12
1.3 3911 1.6 1116.484 GKS11 - 4MÇÇÇ 080-12
1.1 4387 1.4 1252.516 GKS11 - 4MÇÇÇ 080-12
1.0 4944 1.2 1411.286 GKS11 - 4MÇÇÇ 080-12

n1=900 0.9 5399 1.1 990.879 GKS11 - 4MÇÇÇ 080-33

0.8 6084 1.0 1116.484 GKS11 - 4MÇÇÇ 080-33
0.7 6825 0.9 1252.516 GKS11 - 4MÇÇÇ 080-33

0.75 kW GKR ÇÇ -2M 5-82

n1=2850 550 12 4.5 5.185 GKR04 - 2MÇÇÇ 080-11
478 14 4.1 5.963 GKR04 - 2MÇÇÇ 080-11
401 17 3.7 7.111 GKR04 - 2MÇÇÇ 080-11
349 20 3.4 8.178 GKR04 - 2MÇÇÇ 080-11
313 22 3.1 9.101 GKR04 - 2MÇÇÇ 080-11
272 25 2.9 10.466 GKR04 - 2MÇÇÇ 080-11
249 27 2.7 11.449 GKR04 - 2MÇÇÇ 080-11

n1=1380 231 29 2.5 5.963 GKR04 - 2MÇÇÇ 080-32

194 35 2.2 7.111 GKR04 - 2MÇÇÇ 080-32
169 40 2.0 8.178 GKR04 - 2MÇÇÇ 080-32
152 45 1.9 9.101 GKR04 - 2MÇÇÇ 080-32

Thermal limit rating not considered (see page 2-7)

Lenze 5-17
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.75 kW GKR ÇÇ -2M 5-82

n1=1380 132 52 1.7 10.466 GKR04 - 2MÇÇÇ 080-32
121 56 1.6 11.449 GKR04 - 2MÇÇÇ 080-32
109 63 1.4 12.698 GKR04 - 2MÇÇÇ 080-32
95 72 1.3 14.603 GKR04 - 2MÇÇÇ 080-32
89 77 1.2 15.556 GKR04 - 2MÇÇÇ 080-32
77 88 1.0 17.889 GKR04 - 2MÇÇÇ 080-32
71 96 0.9 19.556 GKR04 - 2MÇÇÇ 080-32
61 111 0.8 22.489 GKR04 - 2MÇÇÇ 080-32

GKS ÇÇ -3M 5-86

n1=2850 556 12 5.3 5.123 GKS04 - 3MÇÇÇ 080-11
406 17 4.5 7.025 GKS04 - 3MÇÇÇ 080-11
349 20 5.3 8.167 GKS04 - 3MÇÇÇ 080-11
317 22 3.9 8.991 GKS04 - 3MÇÇÇ 080-11
290 24 3.7 9.836 GKS04 - 3MÇÇÇ 080-11
243 28 5.2 11.730 GKS04 - 3MÇÇÇ 080-11
216 32 4.3 13.176 GKS05 - 3MÇÇÇ 080-11

5 n1=1380 196 35 2.7 7.025 GKS04 - 3MÇÇÇ 080-32

169 40 3.2 8.167 GKS04 - 3MÇÇÇ 080-32
154 44 2.3 8.991 GKS04 - 3MÇÇÇ 080-32
140 49 2.2 9.836 GKS04 - 3MÇÇÇ 080-32
118 58 3.1 11.730 GKS04 - 3MÇÇÇ 080-32
106 64 2.6 13.067 GKS04 - 3MÇÇÇ 080-32
96 71 2.3 14.333 GKS04 - 3MÇÇÇ 080-32
86 79 2.3 16.087 GKS04 - 3MÇÇÇ 080-32
77 88 1.9 17.920 GKS04 - 3MÇÇÇ 080-32
67 102 1.8 20.588 GKS04 - 3MÇÇÇ 080-32
61 111 1.6 22.522 GKS04 - 3MÇÇÇ 080-32
55 124 1.4 25.088 GKS04 - 3MÇÇÇ 080-32
48 142 1.3 28.727 GKS04 - 3MÇÇÇ 080-32
46 148 2.2 29.931 GKS05 - 3MÇÇÇ 080-32
43 158 1.1 32.000 GKS04 - 3MÇÇÇ 080-32
42 161 2.1 32.744 GKS05 - 3MÇÇÇ 080-32
39 174 1.1 35.191 GKS04 - 3MÇÇÇ 080-32
37 182 1.7 36.894 GKS05 - 3MÇÇÇ 080-32
35 193 0.9 39.200 GKS04 - 3MÇÇÇ 080-32
33 206 1.6 41.765 GKS05 - 3MÇÇÇ 080-32
31 218 0.9 44.240 GKS04 - 3MÇÇÇ 080-32
29 232 1.3 47.059 GKS05 - 3MÇÇÇ 080-32
27 252 1.3 51.162 GKS05 - 3MÇÇÇ 080-32
24 284 1.1 57.647 GKS05 - 3MÇÇÇ 080-32
24 285 2.4 57.882 GKS06 - 3MÇÇÇ 080-32
21 328 1.0 66.592 GKS05 - 3MÇÇÇ 080-32
21 321 1.9 65.207 GKS06 - 3MÇÇÇ 080-32

Thermal limit rating not considered (see page 2-7)

5-18 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

0.75 kW GKS ÇÇ -3M 5-86

n1=1380 18 370 0.8 75.033 GKS05 - 3MÇÇÇ 080-32
19 355 2.0 72.000 GKS06 - 3MÇÇÇ 080-32
17 408 0.8 82.833 GKS05 - 3MÇÇÇ 080-32
17 400 1.6 81.111 GKS06 - 3MÇÇÇ 080-32
15 459 1.5 93.176 GKS06 - 3MÇÇÇ 080-32
15 456 2.8 92.563 GKS07 - 3MÇÇÇ 080-32
13 517 1.2 104.967 GKS06 - 3MÇÇÇ 080-32
13 514 2.4 104.296 GKS07 - 3MÇÇÇ 080-32
12 558 1.3 113.082 GKS06 - 3MÇÇÇ 080-32
12 554 2.4 112.338 GKS07 - 3MÇÇÇ 080-32
11 628 1.0 127.392 GKS06 - 3MÇÇÇ 080-32
11 624 2.0 126.578 GKS07 - 3MÇÇÇ 080-32
9.7 705 1.0 142.941 GKS06 - 3MÇÇÇ 080-32
7.5 910 1.5 184.600 GKS07 - 3MÇÇÇ 080-32
6.6 1025 1.2 208.000 GKS07 - 3MÇÇÇ 080-32
6.2 1104 1.2 224.037 GKS07 - 3MÇÇÇ 080-32
5.5 1244 1.0 252.436 GKS07 - 3MÇÇÇ 080-32
4.9 1396 1.0 283.193 GKS07 - 3MÇÇÇ 080-32

GKS ÇÇ -4M 5-94

4.3
4.3
1556
1567
0.9
1.9
321.049
323.365
GKS07 - 4MÇÇÇ 080-32
GKS09 - 4MÇÇÇ 080-32
5
3.8 1766 1.7 364.427 GKS09 - 4MÇÇÇ 080-32
3.4 1949 1.6 402.234 GKS09 - 4MÇÇÇ 080-32
3.0 2197 1.4 453.311 GKS09 - 4MÇÇÇ 080-32
2.7 2522 1.2 520.538 GKS09 - 4MÇÇÇ 080-32
2.4 2843 1.1 586.638 GKS09 - 4MÇÇÇ 080-32
2.2 3061 1.0 631.744 GKS09 - 4MÇÇÇ 080-32
1.9 3450 0.9 711.965 GKS09 - 4MÇÇÇ 080-32
1.7 3956 1.5 816.455 GKS11 - 4MÇÇÇ 080-32
1.5 4458 1.4 919.949 GKS11 - 4MÇÇÇ 080-32
1.4 4802 1.2 990.879 GKS11 - 4MÇÇÇ 080-32
1.2 5410 1.1 1116.484 GKS11 - 4MÇÇÇ 080-32
1.1 6070 1.0 1252.516 GKS11 - 4MÇÇÇ 080-32
1.0 6839 0.9 1411.286 GKS11 - 4MÇÇÇ 080-32

1.1 kW GKR ÇÇ -2M 5-82

n1=2810 542 18 3.0 5.185 GKR04 - 2MÇÇÇ 080-31
471 21 2.8 5.963 GKR04 - 2MÇÇÇ 080-31
395 25 2.5 7.111 GKR04 - 2MÇÇÇ 080-31
344 29 2.3 8.178 GKR04 - 2MÇÇÇ 080-31
309 32 2.1 9.101 GKR04 - 2MÇÇÇ 080-31
269 37 1.9 10.466 GKR04 - 2MÇÇÇ 080-31
245 41 1.8 11.449 GKR04 - 2MÇÇÇ 080-31
221 45 1.6 12.698 GKR04 - 2MÇÇÇ 080-31
192 52 1.4 14.603 GKR04 - 2MÇÇÇ 080-31

Thermal limit rating not considered (see page 2-7)

Lenze 5-19
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

1.1 kW GKR ÇÇ -2M 5-82

n1=2810 181 55 1.3 15.556 GKR04 - 2MÇÇÇ 080-31
157 64 1.2 17.889 GKR04 - 2MÇÇÇ 080-31
144 69 1.1 19.556 GKR04 - 2MÇÇÇ 080-31
125 80 0.9 22.489 GKR04 - 2MÇÇÇ 080-31
112 89 0.9 25.185 GKR04 - 2MÇÇÇ 080-31
97 103 0.8 28.963 GKR04 - 2MÇÇÇ 080-31

GKS ÇÇ -3M 5-86

549 18 3.6 5.123 GKS04 - 3MÇÇÇ 080-31
400 25 3.0 7.025 GKS04 - 3MÇÇÇ 080-31
344 29 3.6 8.167 GKS04 - 3MÇÇÇ 080-31
313 32 2.6 8.991 GKS04 - 3MÇÇÇ 080-31
286 35 2.5 9.836 GKS04 - 3MÇÇÇ 080-31
240 42 3.5 11.730 GKS04 - 3MÇÇÇ 080-31
215 46 2.9 13.067 GKS04 - 3MÇÇÇ 080-31

n1=1410 201 50 1.9 7.025 GKS04 - 3MÇÇÇ 090-12

206 49 3.0 6.863 GKS05 - 3MÇÇÇ 090-12

5 173 58 2.2 8.167 GKS04 - 3MÇÇÇ 090-12

157 64 1.6 8.991 GKS04 - 3MÇÇÇ 090-12
150 67 2.5 9.412 GKS05 - 3MÇÇÇ 090-12
143 70 1.5 9.836 GKS04 - 3MÇÇÇ 090-12
133 75 3.0 10.569 GKS05 - 3MÇÇÇ 090-12
120 83 2.2 11.730 GKS04 - 3MÇÇÇ 090-12
121 83 3.0 11.667 GKS05 - 3MÇÇÇ 090-12
108 93 1.8 13.067 GKS04 - 3MÇÇÇ 090-12
98 101 1.6 14.333 GKS04 - 3MÇÇÇ 090-12
97 103 2.5 14.494 GKS05 - 3MÇÇÇ 090-12
88 114 1.6 16.087 GKS04 - 3MÇÇÇ 090-12
88 113 2.5 16.000 GKS05 - 3MÇÇÇ 090-12
79 127 1.3 17.920 GKS04 - 3MÇÇÇ 090-12
83 121 2.6 17.054 GKS05 - 3MÇÇÇ 090-12
69 146 1.3 20.588 GKS04 - 3MÇÇÇ 090-12
73 136 2.2 19.216 GKS05 - 3MÇÇÇ 090-12
63 159 1.1 22.522 GKS04 - 3MÇÇÇ 090-12
60 166 2.0 23.388 GKS05 - 3MÇÇÇ 090-12
54 187 1.6 26.353 GKS05 - 3MÇÇÇ 090-12
56 178 0.9 25.088 GKS04 - 3MÇÇÇ 090-12
49 203 0.9 28.727 GKS04 - 3MÇÇÇ 090-12
47 212 1.6 29.931 GKS05 - 3MÇÇÇ 090-12
43 232 1.4 32.744 GKS05 - 3MÇÇÇ 090-12
44 227 2.7 32.063 GKS06 - 3MÇÇÇ 090-12
38 261 1.2 36.894 GKS05 - 3MÇÇÇ 090-12
39 257 2.7 36.303 GKS06 - 3MÇÇÇ 090-12
34 296 1.1 41.765 GKS05 - 3MÇÇÇ 090-12
30 333 0.9 47.059 GKS05 - 3MÇÇÇ 090-12
32 315 2.2 44.471 GKS06 - 3MÇÇÇ 090-12
28 362 0.9 51.162 GKS05 - 3MÇÇÇ 090-12
27 376 1.9 53.074 GKS06 - 3MÇÇÇ 090-12

Thermal limit rating not considered (see page 2-7)

5-20 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

1.1 kW GKS ÇÇ -3M 5-86

n1=1410 24 410 1.7 57.882 GKS06 - 3MÇÇÇ 090-12
25 407 3.2 57.501 GKS07 - 3MÇÇÇ 090-12
22 461 1.4 65.207 GKS06 - 3MÇÇÇ 090-12
22 459 2.6 64.790 GKS07 - 3MÇÇÇ 090-12
20 510 1.4 72.000 GKS06 - 3MÇÇÇ 090-12
20 499 2.7 70.474 GKS07 - 3MÇÇÇ 090-12
17 574 1.1 81.111 GKS06 - 3MÇÇÇ 090-12
18 562 2.1 79.407 GKS07 - 3MÇÇÇ 090-12
15 659 1.1 93.176 GKS06 - 3MÇÇÇ 090-12
15 655 2.0 92.563 GKS07 - 3MÇÇÇ 090-12
13 743 0.9 104.967 GKS06 - 3MÇÇÇ 090-12
14 738 1.7 104.296 GKS07 - 3MÇÇÇ 090-12
13 800 0.9 113.082 GKS06 - 3MÇÇÇ 090-12
13 795 1.7 112.338 GKS07 - 3MÇÇÇ 090-12
11 896 1.4 126.578 GKS07 - 3MÇÇÇ 090-12
10 995 1.3 140.548 GKS07 - 3MÇÇÇ 090-12
10 997 2.6 140.921 GKS09 - 3MÇÇÇ 090-12
8.9 1121 1.1 158.364 GKS07 - 3MÇÇÇ 090-12
8.9 1124 2.6 158.816 GKS09 - 3MÇÇÇ 090-12
7.6 1306 1.0 184.600 GKS07 - 3MÇÇÇ 090-12
7.8 1288 2.4 182.000 GKS09 - 3MÇÇÇ 090-12
6.8
6.9
1472
1451
0.8
2.1
208.000
205.111
GKS07 - 3MÇÇÇ 090-12
GKS09 - 3MÇÇÇ 090-12
5
6.3 1585 0.8 224.037 GKS07 - 3MÇÇÇ 090-12
6.4 1563 1.9 220.882 GKS09 - 3MÇÇÇ 090-12
5.7 1762 1.8 248.930 GKS09 - 3MÇÇÇ 090-12
5.1 1976 1.5 279.205 GKS09 - 3MÇÇÇ 090-12
4.5 2227 1.4 314.659 GKS09 - 3MÇÇÇ 090-12

GKS ÇÇ -4M 5-94

3.9 2535 1.2 364.427 GKS09 - 4MÇÇÇ 090-12
3.9 2531 2.4 363.866 GKS11 - 4MÇÇÇ 090-12
3.5 2798 1.1 402.234 GKS09 - 4MÇÇÇ 090-12
3.6 2753 2.2 395.787 GKS11 - 4MÇÇÇ 090-12
3.1 3153 1.0 453.311 GKS09 - 4MÇÇÇ 090-12
3.2 3102 1.9 445.958 GKS11 - 4MÇÇÇ 090-12
2.7 3621 0.8 520.538 GKS09 - 4MÇÇÇ 090-12
2.8 3563 1.7 512.195 GKS11 - 4MÇÇÇ 090-12
2.4 4015 1.5 577.122 GKS11 - 4MÇÇÇ 090-12
2.3 4324 1.4 621.619 GKS11 - 4MÇÇÇ 090-12
2.0 4872 1.3 700.416 GKS11 - 4MÇÇÇ 090-12
1.7 5679 1.1 816.455 GKS11 - 4MÇÇÇ 090-12
1.8 5606 2.1 805.901 GKS14 - 4MÇÇÇ 090-12
1.5 6399 1.0 919.949 GKS11 - 4MÇÇÇ 090-12
1.6 6316 1.8 908.058 GKS14 - 4MÇÇÇ 090-12
1.4 6893 0.9 990.879 GKS11 - 4MÇÇÇ 090-12
1.4 6804 1.7 978.071 GKS14 - 4MÇÇÇ 090-12
1.3 7666 1.5 1102.052 GKS14 - 4MÇÇÇ 090-12
1.1 8600 1.3 1236.326 GKS14 - 4MÇÇÇ 090-12
1.0 9690 1.2 1393.043 GKS14 - 4MÇÇÇ 090-12

Thermal limit rating not considered (see page 2-7)

Lenze 5-21
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

1.5 kW GKS ÇÇ -3M 5-86

n1=2840 554 25 2.7 5.123 GKS04 - 3MÇÇÇ 090-11
404 34 2.2 7.025 GKS04 - 3MÇÇÇ 090-11
348 39 2.7 8.167 GKS04 - 3MÇÇÇ 090-11
316 43 1.9 8.991 GKS04 - 3MÇÇÇ 090-11
302 45 3.0 9.412 GKS05 - 3MÇÇÇ 090-11
289 47 1.8 9.836 GKS04 - 3MÇÇÇ 090-11
242 56 2.6 11.730 GKS04 - 3MÇÇÇ 090-11
217 63 2.1 13.067 GKS04 - 3MÇÇÇ 090-11

n1=1420 202 67 1.4 7.025 GKS04 - 3MÇÇÇ 090-32

207 66 2.2 6.863 GKS05 - 3MÇÇÇ 090-32
174 78 1.6 8.167 GKS04 - 3MÇÇÇ 090-32
158 86 1.2 8.991 GKS04 - 3MÇÇÇ 090-32
151 90 1.8 9.412 GKS05 - 3MÇÇÇ 090-32
144 94 1.1 9.836 GKS04 - 3MÇÇÇ 090-32
134 101 2.2 10.569 GKS05 - 3MÇÇÇ 090-32
121 112 1.6 11.730 GKS04 - 3MÇÇÇ 090-32
122 112 2.2 11.667 GKS05 - 3MÇÇÇ 090-32
109 125 1.3 13.067 GKS04 - 3MÇÇÇ 090-32

5 99
98
137
139
1.2
1.8
14.333
14.494
GKS04 - 3MÇÇÇ 090-32
GKS05 - 3MÇÇÇ 090-32
88 154 1.2 16.087 GKS04 - 3MÇÇÇ 090-32
89 153 1.8 16.000 GKS05 - 3MÇÇÇ 090-32
79 172 1.0 17.920 GKS04 - 3MÇÇÇ 090-32
83 163 1.9 17.054 GKS05 - 3MÇÇÇ 090-32
80 171 3.0 17.809 GKS06 - 3MÇÇÇ 090-32
69 197 0.9 20.588 GKS04 - 3MÇÇÇ 090-32
74 184 1.6 19.216 GKS05 - 3MÇÇÇ 090-32
63 216 0.8 22.522 GKS04 - 3MÇÇÇ 090-32
61 224 1.5 23.388 GKS05 - 3MÇÇÇ 090-32
54 253 1.2 26.353 GKS05 - 3MÇÇÇ 090-32
55 249 2.7 26.017 GKS06 - 3MÇÇÇ 090-32
47 287 1.2 29.931 GKS05 - 3MÇÇÇ 090-32
50 273 2.5 28.461 GKS06 - 3MÇÇÇ 090-32
43 314 1.1 32.744 GKS05 - 3MÇÇÇ 090-32
44 307 2.0 32.063 GKS06 - 3MÇÇÇ 090-32
39 354 0.9 36.894 GKS05 - 3MÇÇÇ 090-32
39 348 2.0 36.303 GKS06 - 3MÇÇÇ 090-32
34 400 0.8 41.765 GKS05 - 3MÇÇÇ 090-32
32 426 1.6 44.471 GKS06 - 3MÇÇÇ 090-32
27 509 1.4 53.074 GKS06 - 3MÇÇÇ 090-32
25 555 1.3 57.882 GKS06 - 3MÇÇÇ 090-32
25 551 2.4 57.501 GKS07 - 3MÇÇÇ 090-32
22 625 1.0 65.207 GKS06 - 3MÇÇÇ 090-32
22 621 1.9 64.790 GKS07 - 3MÇÇÇ 090-32
20 690 1.0 72.000 GKS06 - 3MÇÇÇ 090-32
20 675 2.0 70.474 GKS07 - 3MÇÇÇ 090-32
18 777 0.8 81.111 GKS06 - 3MÇÇÇ 090-32
18 761 1.6 79.407 GKS07 - 3MÇÇÇ 090-32

Thermal limit rating not considered (see page 2-7)

5-22 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

1.5 kW GKS ÇÇ -3M 5-86

n1=1420 15 887 1.5 92.563 GKS07 - 3MÇÇÇ 090-32
16 880 2.9 91.860 GKS09 - 3MÇÇÇ 090-32
14 999 1.2 104.296 GKS07 - 3MÇÇÇ 090-32
14 992 2.9 103.524 GKS09 - 3MÇÇÇ 090-32
13 1076 1.2 112.338 GKS07 - 3MÇÇÇ 090-32
13 1068 2.5 111.484 GKS09 - 3MÇÇÇ 090-32
11 1213 1.0 126.578 GKS07 - 3MÇÇÇ 090-32
11 1204 2.5 125.641 GKS09 - 3MÇÇÇ 090-32
10 1347 1.0 140.548 GKS07 - 3MÇÇÇ 090-32
10 1350 2.0 140.921 GKS09 - 3MÇÇÇ 090-32
9.0 1517 0.8 158.364 GKS07 - 3MÇÇÇ 090-32
8.9 1522 2.0 158.816 GKS09 - 3MÇÇÇ 090-32
7.8 1744 1.7 182.000 GKS09 - 3MÇÇÇ 090-32
6.9 1965 1.6 205.111 GKS09 - 3MÇÇÇ 090-32
6.4 2116 1.4 220.882 GKS09 - 3MÇÇÇ 090-32
5.7 2385 1.3 248.930 GKS09 - 3MÇÇÇ 090-32
5.1 2675 1.1 279.205 GKS09 - 3MÇÇÇ 090-32
4.5 3015 1.0 314.659 GKS09 - 3MÇÇÇ 090-32

GKS ÇÇ -4M 5-94

3.9
3.9
3432
3427
0.9
1.8
364.427
363.866
GKS09 - 4MÇÇÇ 090-32
GKS11 - 4MÇÇÇ 090-32
5
3.5 3789 0.8 402.234 GKS09 - 4MÇÇÇ 090-32
3.6 3728 1.6 395.787 GKS11 - 4MÇÇÇ 090-32
3.2 4200 1.4 445.958 GKS11 - 4MÇÇÇ 090-32
2.8 4824 1.2 512.195 GKS11 - 4MÇÇÇ 090-32
2.5 5436 1.1 577.122 GKS11 - 4MÇÇÇ 090-32
2.3 5855 1.0 621.619 GKS11 - 4MÇÇÇ 090-32
2.0 6597 0.9 700.416 GKS11 - 4MÇÇÇ 090-32
1.8 7591 1.5 805.901 GKS14 - 4MÇÇÇ 090-32
1.6 8553 1.4 908.058 GKS14 - 4MÇÇÇ 090-32
1.5 9212 1.3 978.071 GKS14 - 4MÇÇÇ 090-32
1.3 10380 1.1 1102.052 GKS14 - 4MÇÇÇ 090-32
1.2 11645 1.0 1236.326 GKS14 - 4MÇÇÇ 090-32
1.0 13121 0.9 1393.043 GKS14 - 4MÇÇÇ 090-32

2.2 kW GKS ÇÇ -3M 5-86

n1=2840 554 36 1.8 5.123 GKS04 - 3MÇÇÇ 090-31
404 49 1.5 7.025 GKS04 - 3MÇÇÇ 090-31
414 48 2.5 6.863 GKS05 - 3MÇÇÇ 090-31
348 57 1.8 8.167 GKS04 - 3MÇÇÇ 090-31
316 63 1.3 8.991 GKS04 - 3MÇÇÇ 090-31
302 66 2.0 9.412 GKS05 - 3MÇÇÇ 090-31
289 69 1.2 9.836 GKS04 - 3MÇÇÇ 090-31
269 74 2.5 10.569 GKS05 - 3MÇÇÇ 090-31
242 82 1.8 11.730 GKS04 - 3MÇÇÇ 090-31
243 82 2.5 11.667 GKS05 - 3MÇÇÇ 090-31

Thermal limit rating not considered (see page 2-7)

Lenze 5-23
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

2.2 kW GKS ÇÇ -3M 5-86

n1=2840 217 92 1.5 13.067 GKS04 - 3MÇÇÇ 090-31
198 101 1.3 14.333 GKS04 - 3MÇÇÇ 090-31
196 102 2.0 14.494 GKS05 - 3MÇÇÇ 090-31
177 113 1.3 16.087 GKS04 - 3MÇÇÇ 090-31
178 112 2.0 16.000 GKS05 - 3MÇÇÇ 090-31

n1=1400 149 134 1.2 9.412 GKS05 - 3MÇÇÇ 100-12

152 131 2.9 9.196 GKS06 - 3MÇÇÇ 100-12
133 151 1.5 10.569 GKS05 - 3MÇÇÇ 100-12
138 145 2.9 10.147 GKS06 - 3MÇÇÇ 100-12
120 166 1.5 11.667 GKS05 - 3MÇÇÇ 100-12
123 162 2.0 11.382 GKS06 - 3MÇÇÇ 100-12
106 188 0.9 13.176 GKS05 - 3MÇÇÇ 100-12
111 180 2.4 12.612 GKS06 - 3MÇÇÇ 100-12
97 207 1.2 14.494 GKS05 - 3MÇÇÇ 100-12
94 211 2.8 14.824 GKS06 - 3MÇÇÇ 100-12
88 228 1.2 16.000 GKS05 - 3MÇÇÇ 100-12
84 238 2.5 16.699 GKS06 - 3MÇÇÇ 100-12
82 243 1.3 17.054 GKS05 - 3MÇÇÇ 100-12
79 254 2.0 17.809 GKS06 - 3MÇÇÇ 100-12
73 274 1.1 19.216 GKS05 - 3MÇÇÇ 100-12
5 69 290 2.3 20.329 GKS06 - 3MÇÇÇ 100-12
60 333 1.0 23.388 GKS05 - 3MÇÇÇ 100-12
61 326 1.9 22.902 GKS06 - 3MÇÇÇ 100-12
54 371 1.8 26.017 GKS06 - 3MÇÇÇ 100-12
49 406 1.7 28.461 GKS06 - 3MÇÇÇ 100-12
50 403 3.0 28.274 GKS07 - 3MÇÇÇ 100-12
44 457 1.3 32.063 GKS06 - 3MÇÇÇ 100-12
44 454 2.6 31.858 GKS07 - 3MÇÇÇ 100-12
39 517 1.3 36.303 GKS06 - 3MÇÇÇ 100-12
39 514 2.5 36.063 GKS07 - 3MÇÇÇ 100-12
34 591 1.2 41.472 GKS06 - 3MÇÇÇ 100-12
32 634 1.1 44.471 GKS06 - 3MÇÇÇ 100-12
32 630 2.1 44.178 GKS07 - 3MÇÇÇ 100-12
26 757 0.9 53.074 GKS06 - 3MÇÇÇ 100-12
28 718 1.8 50.345 GKS07 - 3MÇÇÇ 100-12
24 825 0.8 57.882 GKS06 - 3MÇÇÇ 100-12
24 820 1.6 57.501 GKS07 - 3MÇÇÇ 100-12
22 924 1.3 64.790 GKS07 - 3MÇÇÇ 100-12
21 939 3.3 65.879 GKS09 - 3MÇÇÇ 100-12
20 1005 1.3 70.474 GKS07 - 3MÇÇÇ 100-12
20 1012 3.0 70.982 GKS09 - 3MÇÇÇ 100-12
18 1132 1.1 79.407 GKS07 - 3MÇÇÇ 100-12
18 1140 2.7 79.996 GKS09 - 3MÇÇÇ 100-12
15 1319 1.0 92.563 GKS07 - 3MÇÇÇ 100-12
15 1309 2.3 91.860 GKS09 - 3MÇÇÇ 100-12
13 1487 0.8 104.296 GKS07 - 3MÇÇÇ 100-12
14 1476 2.1 103.524 GKS09 - 3MÇÇÇ 100-12
13 1601 0.8 112.338 GKS07 - 3MÇÇÇ 100-12
13 1589 1.9 111.484 GKS09 - 3MÇÇÇ 100-12
13 1587 2.8 111.335 GKS11 - 3MÇÇÇ 100-12

Thermal limit rating not considered (see page 2-7)

5-24 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

2.2 kW GKS ÇÇ -3M 5-86

n1=1400 11 1791 1.7 125.641 GKS09 - 3MÇÇÇ 100-12
11 1788 2.8 125.448 GKS11 - 3MÇÇÇ 100-12
9.9 2009 1.5 140.921 GKS09 - 3MÇÇÇ 100-12
10.0 2006 2.3 140.732 GKS11 - 3MÇÇÇ 100-12
8.8 2264 1.4 158.816 GKS09 - 3MÇÇÇ 100-12
8.8 2260 2.3 158.571 GKS11 - 3MÇÇÇ 100-12
7.7 2594 1.2 182.000 GKS09 - 3MÇÇÇ 100-12
7.5 2659 2.3 186.572 GKS11 - 3MÇÇÇ 100-12
6.8 2924 1.1 205.111 GKS09 - 3MÇÇÇ 100-12
6.7 2996 2.0 210.222 GKS11 - 3MÇÇÇ 100-12
6.3 3148 1.0 220.882 GKS09 - 3MÇÇÇ 100-12
6.2 3228 1.9 226.431 GKS11 - 3MÇÇÇ 100-12
5.6 3548 0.9 248.930 GKS09 - 3MÇÇÇ 100-12
5.5 3637 1.6 255.133 GKS11 - 3MÇÇÇ 100-12
4.9 4080 1.5 286.219 GKS11 - 3MÇÇÇ 100-12
4.3 4597 1.3 322.500 GKS11 - 3MÇÇÇ 100-12

GKS ÇÇ -4M 5-94

3.9 5098 1.2 363.866 GKS11 - 4MÇÇÇ 100-12
3.9 5079 2.3 362.512 GKS14 - 4MÇÇÇ 100-12
3.5 5546 1.1 395.787 GKS11 - 4MÇÇÇ 100-12
3.6 5474 2.1 390.672 GKS14 - 4MÇÇÇ 100-12
5
3.1 6249 1.0 445.958 GKS11 - 4MÇÇÇ 100-12
3.2 6168 1.9 440.193 GKS14 - 4MÇÇÇ 100-12
2.7 7177 0.8 512.195 GKS11 - 4MÇÇÇ 100-12
2.7 7190 1.6 513.121 GKS14 - 4MÇÇÇ 100-12
2.4 8101 1.4 578.164 GKS14 - 4MÇÇÇ 100-12
2.3 8726 1.3 622.742 GKS14 - 4MÇÇÇ 100-12
2.0 9832 1.2 701.681 GKS14 - 4MÇÇÇ 100-12
1.7 11292 1.0 805.901 GKS14 - 4MÇÇÇ 100-12
1.5 12723 0.9 908.058 GKS14 - 4MÇÇÇ 100-12
1.4 13704 0.8 978.071 GKS14 - 4MÇÇÇ 100-12

3 kW GKS ÇÇ -3M 5-86

n1=2850 440 62 3.4 6.485 GKS06 - 3MÇÇÇ 100-31
415 66 1.8 6.863 GKS05 - 3MÇÇÇ 100-31
303 90 1.5 9.412 GKS05 - 3MÇÇÇ 100-31
270 101 1.8 10.569 GKS05 - 3MÇÇÇ 100-31
244 111 1.8 11.667 GKS05 - 3MÇÇÇ 100-31
250 109 2.5 11.382 GKS06 - 3MÇÇÇ 100-31
216 126 1.1 13.176 GKS05 - 3MÇÇÇ 100-31
226 120 2.9 12.612 GKS06 - 3MÇÇÇ 100-31
197 138 1.5 14.494 GKS05 - 3MÇÇÇ 100-31
178 153 1.5 16.000 GKS05 - 3MÇÇÇ 100-31
171 159 3.1 16.699 GKS06 - 3MÇÇÇ 100-31
167 163 1.6 17.054 GKS05 - 3MÇÇÇ 100-31
160 170 2.5 17.809 GKS06 - 3MÇÇÇ 100-31

Thermal limit rating not considered (see page 2-7)

Lenze 5-25
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

3 kW GKS ÇÇ -3M 5-86

n1=1400 149 183 0.9 9.412 GKS05 - 3MÇÇÇ 100-32
152 179 2.1 9.196 GKS06 - 3MÇÇÇ 100-32
133 205 1.1 10.569 GKS05 - 3MÇÇÇ 100-32
138 197 2.1 10.147 GKS06 - 3MÇÇÇ 100-32
120 227 1.1 11.667 GKS05 - 3MÇÇÇ 100-32
123 221 1.5 11.382 GKS06 - 3MÇÇÇ 100-32
123 221 2.8 11.378 GKS07 - 3MÇÇÇ 100-32
111 245 1.7 12.612 GKS06 - 3MÇÇÇ 100-32
97 282 0.9 14.494 GKS05 - 3MÇÇÇ 100-32
94 288 2.1 14.824 GKS06 - 3MÇÇÇ 100-32
88 311 0.9 16.000 GKS05 - 3MÇÇÇ 100-32
84 325 1.9 16.699 GKS06 - 3MÇÇÇ 100-32
82 332 1.0 17.054 GKS05 - 3MÇÇÇ 100-32
79 346 1.5 17.809 GKS06 - 3MÇÇÇ 100-32
81 336 3.0 17.270 GKS07 - 3MÇÇÇ 100-32
69 395 1.7 20.329 GKS06 - 3MÇÇÇ 100-32
61 445 1.4 22.902 GKS06 - 3MÇÇÇ 100-32
54 506 1.3 26.017 GKS06 - 3MÇÇÇ 100-32
56 491 2.4 25.244 GKS07 - 3MÇÇÇ 100-32
49 553 1.2 28.461 GKS06 - 3MÇÇÇ 100-32
50 550 2.2 28.274 GKS07 - 3MÇÇÇ 100-32

5 44
44
623
619
1.0
1.9
32.063
31.858
GKS06 - 3MÇÇÇ 100-32
GKS07 - 3MÇÇÇ 100-32
39 706 1.0 36.303 GKS06 - 3MÇÇÇ 100-32
39 701 1.8 36.063 GKS07 - 3MÇÇÇ 100-32
34 806 0.9 41.472 GKS06 - 3MÇÇÇ 100-32
32 859 1.5 44.178 GKS07 - 3MÇÇÇ 100-32
28 979 1.3 50.345 GKS07 - 3MÇÇÇ 100-32
24 1118 1.2 57.501 GKS07 - 3MÇÇÇ 100-32
24 1136 2.7 58.456 GKS09 - 3MÇÇÇ 100-32
22 1259 1.0 64.790 GKS07 - 3MÇÇÇ 100-32
21 1281 2.4 65.879 GKS09 - 3MÇÇÇ 100-32
20 1370 1.0 70.474 GKS07 - 3MÇÇÇ 100-32
20 1380 2.2 70.982 GKS09 - 3MÇÇÇ 100-32
18 1555 2.0 79.996 GKS09 - 3MÇÇÇ 100-32
15 1786 1.7 91.860 GKS09 - 3MÇÇÇ 100-32
15 1783 2.5 91.737 GKS11 - 3MÇÇÇ 100-32
14 2012 1.5 103.524 GKS09 - 3MÇÇÇ 100-32
14 2009 2.5 103.365 GKS11 - 3MÇÇÇ 100-32
13 2167 1.4 111.484 GKS09 - 3MÇÇÇ 100-32
13 2164 2.1 111.335 GKS11 - 3MÇÇÇ 100-32
11 2442 1.3 125.641 GKS09 - 3MÇÇÇ 100-32
11 2438 2.1 125.448 GKS11 - 3MÇÇÇ 100-32
9.9 2739 1.1 140.921 GKS09 - 3MÇÇÇ 100-32
10.0 2735 1.7 140.732 GKS11 - 3MÇÇÇ 100-32
8.8 3087 1.0 158.816 GKS09 - 3MÇÇÇ 100-32
8.8 3082 1.7 158.571 GKS11 - 3MÇÇÇ 100-32
7.7 3538 0.9 182.000 GKS09 - 3MÇÇÇ 100-32
7.5 3626 1.7 186.572 GKS11 - 3MÇÇÇ 100-32
6.7 4086 1.4 210.222 GKS11 - 3MÇÇÇ 100-32
6.2 4401 1.4 226.431 GKS11 - 3MÇÇÇ 100-32

Thermal limit rating not considered (see page 2-7)

5-26 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

3 kW GKS ÇÇ -3M 5-86

n1=1400 5.5 4959 1.2 255.133 GKS11 - 3MÇÇÇ 100-32
4.9 5563 1.1 286.219 GKS11 - 3MÇÇÇ 100-32
4.3 6268 0.9 322.500 GKS11 - 3MÇÇÇ 100-32

GKS ÇÇ -4M 5-94

3.9 6952 0.9 363.866 GKS11 - 4MÇÇÇ 100-32
3.9 6926 1.7 362.512 GKS14 - 4MÇÇÇ 100-32
3.6 7464 1.5 390.672 GKS14 - 4MÇÇÇ 100-32
3.2 8411 1.4 440.193 GKS14 - 4MÇÇÇ 100-32
2.7 9804 1.2 513.121 GKS14 - 4MÇÇÇ 100-32
2.4 11047 1.1 578.164 GKS14 - 4MÇÇÇ 100-32
2.3 11898 1.0 622.742 GKS14 - 4MÇÇÇ 100-32
2.0 13407 0.9 701.681 GKS14 - 4MÇÇÇ 100-32

4 kW GKS ÇÇ -3M 5-86

n1=2830 436 83 2.6 6.485 GKS06 - 3MÇÇÇ 100-41
412 88 1.4 6.863 GKS05 - 3MÇÇÇ 100-41
301 121 1.1 9.412 GKS05 - 3MÇÇÇ 100-41
308 118 2.6 9.196 GKS06 - 3MÇÇÇ 100-41
268
279
136
130
1.4
2.6
10.569
10.147
GKS05 - 3MÇÇÇ 100-41
GKS06 - 3MÇÇÇ 100-41
5
243 150 1.4 11.667 GKS05 - 3MÇÇÇ 100-41
249 146 1.8 11.382 GKS06 - 3MÇÇÇ 100-41
224 162 2.1 12.612 GKS06 - 3MÇÇÇ 100-41
195 186 1.1 14.494 GKS05 - 3MÇÇÇ 100-41
191 190 2.6 14.824 GKS06 - 3MÇÇÇ 100-41
177 205 1.1 16.000 GKS05 - 3MÇÇÇ 100-41
170 214 2.3 16.699 GKS06 - 3MÇÇÇ 100-41
166 219 1.2 17.054 GKS05 - 3MÇÇÇ 100-41
159 228 1.8 17.809 GKS06 - 3MÇÇÇ 100-41

n1=1430 156 233 1.6 9.196 GKS06 - 3MÇÇÇ 112-22

156 233 3.1 9.171 GKS07 - 3MÇÇÇ 112-22
141 258 1.6 10.147 GKS06 - 3MÇÇÇ 112-22
141 257 3.1 10.124 GKS07 - 3MÇÇÇ 112-22
126 289 1.2 11.382 GKS06 - 3MÇÇÇ 112-22
126 289 2.1 11.378 GKS07 - 3MÇÇÇ 112-22
113 320 1.3 12.612 GKS06 - 3MÇÇÇ 112-22
113 323 2.6 12.711 GKS07 - 3MÇÇÇ 112-22
97 376 1.6 14.824 GKS06 - 3MÇÇÇ 112-22
97 376 2.8 14.798 GKS07 - 3MÇÇÇ 112-22
86 424 1.4 16.699 GKS06 - 3MÇÇÇ 112-22
86 423 2.5 16.674 GKS07 - 3MÇÇÇ 112-22
80 452 1.2 17.809 GKS06 - 3MÇÇÇ 112-22
83 438 2.3 17.270 GKS07 - 3MÇÇÇ 112-22
70 516 1.3 20.329 GKS06 - 3MÇÇÇ 112-22
70 520 2.1 20.511 GKS07 - 3MÇÇÇ 112-22
62 581 1.0 22.902 GKS06 - 3MÇÇÇ 112-22
62 586 2.0 23.111 GKS07 - 3MÇÇÇ 112-22

Thermal limit rating not considered (see page 2-7)

Lenze 5-27
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

4 kW GKS ÇÇ -3M 5-86

n1=1430 55 660 1.0 26.017 GKS06 - 3MÇÇÇ 112-22
57 641 1.8 25.244 GKS07 - 3MÇÇÇ 112-22
50 722 0.9 28.461 GKS06 - 3MÇÇÇ 112-22
51 717 1.7 28.274 GKS07 - 3MÇÇÇ 112-22
45 808 1.5 31.858 GKS07 - 3MÇÇÇ 112-22
40 915 1.4 36.063 GKS07 - 3MÇÇÇ 112-22
35 1038 1.2 40.906 GKS07 - 3MÇÇÇ 112-22
36 1006 3.0 39.662 GKS09 - 3MÇÇÇ 112-22
32 1121 1.2 44.178 GKS07 - 3MÇÇÇ 112-22
33 1095 2.8 43.146 GKS09 - 3MÇÇÇ 112-22
28 1277 1.0 50.345 GKS07 - 3MÇÇÇ 112-22
29 1234 2.5 48.625 GKS09 - 3MÇÇÇ 112-22
25 1459 0.9 57.501 GKS07 - 3MÇÇÇ 112-22
25 1483 2.0 58.456 GKS09 - 3MÇÇÇ 112-22
22 1672 1.8 65.879 GKS09 - 3MÇÇÇ 112-22
22 1649 3.2 64.995 GKS11 - 3MÇÇÇ 112-22
20 1801 1.7 70.982 GKS09 - 3MÇÇÇ 112-22
20 1799 2.7 70.887 GKS11 - 3MÇÇÇ 112-22
18 2030 1.5 79.996 GKS09 - 3MÇÇÇ 112-22
18 2027 2.7 79.873 GKS11 - 3MÇÇÇ 112-22
16 2331 1.3 91.860 GKS09 - 3MÇÇÇ 112-22
5 16 2328 2.2 91.737 GKS11 - 3MÇÇÇ 112-22
14 2627 1.2 103.524 GKS09 - 3MÇÇÇ 112-22
14 2623 2.2 103.365 GKS11 - 3MÇÇÇ 112-22
13 2829 1.1 111.484 GKS09 - 3MÇÇÇ 112-22
13 2825 1.8 111.335 GKS11 - 3MÇÇÇ 112-22
13 2788 2.2 109.896 GKS14 - 3MÇÇÇ 112-22
11 3188 1.0 125.641 GKS09 - 3MÇÇÇ 112-22
11 3183 1.8 125.448 GKS11 - 3MÇÇÇ 112-22
12 3142 2.2 123.826 GKS14 - 3MÇÇÇ 112-22
10 3571 1.4 140.732 GKS11 - 3MÇÇÇ 112-22
10 3525 1.8 138.913 GKS14 - 3MÇÇÇ 112-22
9.0 4023 1.4 158.571 GKS11 - 3MÇÇÇ 112-22
9.1 3971 1.8 156.522 GKS14 - 3MÇÇÇ 112-22
7.7 4734 1.3 186.572 GKS11 - 3MÇÇÇ 112-22
7.7 4734 2.5 186.572 GKS14 - 3MÇÇÇ 112-22
6.8 5334 1.1 210.222 GKS11 - 3MÇÇÇ 112-22
6.8 5334 2.2 210.222 GKS14 - 3MÇÇÇ 112-22
6.3 5745 1.0 226.431 GKS11 - 3MÇÇÇ 112-22
6.3 5745 2.0 226.431 GKS14 - 3MÇÇÇ 112-22
5.6 6473 0.9 255.133 GKS11 - 3MÇÇÇ 112-22
5.6 6473 1.8 255.133 GKS14 - 3MÇÇÇ 112-22
5.0 7262 0.8 286.219 GKS11 - 3MÇÇÇ 112-22
5.0 7262 1.6 286.219 GKS14 - 3MÇÇÇ 112-22
4.4 8183 1.4 322.500 GKS14 - 3MÇÇÇ 112-22

GKS ÇÇ -4M 5-94

3.9 9041 1.3 362.512 GKS14 - 4MÇÇÇ 112-22
3.7 9744 1.2 390.672 GKS14 - 4MÇÇÇ 112-22
3.3 10979 1.1 440.193 GKS14 - 4MÇÇÇ 112-22
2.8 12798 0.9 513.121 GKS14 - 4MÇÇÇ 112-22
2.5 14420 0.8 578.164 GKS14 - 4MÇÇÇ 112-22

Thermal limit rating not considered (see page 2-7)

5-28 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

5.5 kW GKS ÇÇ -3M 5-86

n1=2890 446 112 1.9 6.485 GKS06 - 3MÇÇÇ 112-31
350 143 3.1 8.254 GKS07 - 3MÇÇÇ 112-31
314 159 1.9 9.196 GKS06 - 3MÇÇÇ 112-31
285 175 1.9 10.147 GKS06 - 3MÇÇÇ 112-31
254 197 1.4 11.382 GKS06 - 3MÇÇÇ 112-31
254 196 2.5 11.378 GKS07 - 3MÇÇÇ 112-31
229 218 1.6 12.612 GKS06 - 3MÇÇÇ 112-31
227 219 3.1 12.711 GKS07 - 3MÇÇÇ 112-31
195 256 1.9 14.824 GKS06 - 3MÇÇÇ 112-31
173 288 1.7 16.699 GKS06 - 3MÇÇÇ 112-31
173 288 3.0 16.674 GKS07 - 3MÇÇÇ 112-31
162 307 1.4 17.809 GKS06 - 3MÇÇÇ 112-31
167 298 2.7 17.270 GKS07 - 3MÇÇÇ 112-31

n1=1440 157 319 1.2 9.196 GKS06 - 3MÇÇÇ 112-32

157 318 2.3 9.171 GKS07 - 3MÇÇÇ 112-32
142 352 1.2 10.147 GKS06 - 3MÇÇÇ 112-32
142 351 2.3 10.124 GKS07 - 3MÇÇÇ 112-32
127 394 0.8 11.382 GKS06 - 3MÇÇÇ 112-32
127 394 1.6 11.378 GKS07 - 3MÇÇÇ 112-32
114 437 1.0 12.612 GKS06 - 3MÇÇÇ 112-32 5
113 440 1.9 12.711 GKS07 - 3MÇÇÇ 112-32
97 514 1.2 14.824 GKS06 - 3MÇÇÇ 112-32
97 513 2.0 14.798 GKS07 - 3MÇÇÇ 112-32
86 579 1.0 16.699 GKS06 - 3MÇÇÇ 112-32
86 578 1.9 16.674 GKS07 - 3MÇÇÇ 112-32
89 559 3.2 16.122 GKS09 - 3MÇÇÇ 112-32
81 617 0.8 17.809 GKS06 - 3MÇÇÇ 112-32
83 598 1.7 17.270 GKS07 - 3MÇÇÇ 112-32
82 608 3.2 17.536 GKS09 - 3MÇÇÇ 112-32
71 704 0.9 20.329 GKS06 - 3MÇÇÇ 112-32
70 711 1.6 20.511 GKS07 - 3MÇÇÇ 112-32
62 801 1.5 23.111 GKS07 - 3MÇÇÇ 112-32
57 875 1.4 25.244 GKS07 - 3MÇÇÇ 112-32
56 889 3.2 25.649 GKS09 - 3MÇÇÇ 112-32
51 980 1.2 28.274 GKS07 - 3MÇÇÇ 112-32
49 1013 2.9 29.228 GKS09 - 3MÇÇÇ 112-32
45 1104 1.1 31.858 GKS07 - 3MÇÇÇ 112-32
44 1141 2.6 32.940 GKS09 - 3MÇÇÇ 112-32
40 1249 1.0 36.063 GKS07 - 3MÇÇÇ 112-32
41 1219 2.5 35.193 GKS09 - 3MÇÇÇ 112-32
35 1417 0.9 40.906 GKS07 - 3MÇÇÇ 112-32
36 1374 2.2 39.662 GKS09 - 3MÇÇÇ 112-32
33 1531 0.9 44.178 GKS07 - 3MÇÇÇ 112-32
33 1495 2.0 43.146 GKS09 - 3MÇÇÇ 112-32
30 1685 1.8 48.625 GKS09 - 3MÇÇÇ 112-32
25 2025 1.5 58.456 GKS09 - 3MÇÇÇ 112-32
25 1998 2.3 57.683 GKS11 - 3MÇÇÇ 112-32
22 2282 1.3 65.879 GKS09 - 3MÇÇÇ 112-32
22 2252 2.3 64.995 GKS11 - 3MÇÇÇ 112-32
20 2459 1.2 70.982 GKS09 - 3MÇÇÇ 112-32
20 2456 2.0 70.887 GKS11 - 3MÇÇÇ 112-32

Thermal limit rating not considered (see page 2-7)

Lenze 5-29
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

5.5 kW GKS ÇÇ -3M 5-86

n1=1440 18 2771 1.1 79.996 GKS09 - 3MÇÇÇ 112-32
18 2767 2.0 79.873 GKS11 - 3MÇÇÇ 112-32
16 3182 1.0 91.860 GKS09 - 3MÇÇÇ 112-32
16 3178 1.6 91.737 GKS11 - 3MÇÇÇ 112-32
16 3137 2.0 90.551 GKS14 - 3MÇÇÇ 112-32
14 3587 0.9 103.524 GKS09 - 3MÇÇÇ 112-32
14 3581 1.6 103.365 GKS11 - 3MÇÇÇ 112-32
14 3535 2.0 102.029 GKS14 - 3MÇÇÇ 112-32
13 3857 1.3 111.335 GKS11 - 3MÇÇÇ 112-32
13 3807 1.6 109.896 GKS14 - 3MÇÇÇ 112-32
12 4346 1.3 125.448 GKS11 - 3MÇÇÇ 112-32
12 4290 1.6 123.826 GKS14 - 3MÇÇÇ 112-32
10 4876 1.1 140.732 GKS11 - 3MÇÇÇ 112-32
10 4813 1.3 138.913 GKS14 - 3MÇÇÇ 112-32
9.1 5494 1.1 158.571 GKS11 - 3MÇÇÇ 112-32
9.2 5423 1.3 156.522 GKS14 - 3MÇÇÇ 112-32
7.7 6464 0.9 186.572 GKS11 - 3MÇÇÇ 112-32
7.7 6464 1.8 186.572 GKS14 - 3MÇÇÇ 112-32
6.9 7283 0.8 210.222 GKS11 - 3MÇÇÇ 112-32
6.9 7283 1.6 210.222 GKS14 - 3MÇÇÇ 112-32
6.4 7845 1.5 226.431 GKS14 - 3MÇÇÇ 112-32
5.6 8839 1.3 255.133 GKS14 - 3MÇÇÇ 112-32
5 5.0 9916 1.2 286.219 GKS14 - 3MÇÇÇ 112-32
4.5 11173 1.0 322.500 GKS14 - 3MÇÇÇ 112-32

GKS ÇÇ -4M 5-94

4.0 12346 0.9 362.512 GKS14 - 4MÇÇÇ 112-32
3.7 13305 0.9 390.672 GKS14 - 4MÇÇÇ 112-32

7.5 kW GKS ÇÇ -3M 5-86

n1=2900 447 152 1.4 6.485 GKS06 - 3MÇÇÇ 112-41
487 140 2.7 5.955 GKS07 - 3MÇÇÇ 112-41
351 194 2.2 8.254 GKS07 - 3MÇÇÇ 112-41
315 216 1.4 9.196 GKS06 - 3MÇÇÇ 112-41
316 215 2.7 9.171 GKS07 - 3MÇÇÇ 112-41
286 238 1.4 10.147 GKS06 - 3MÇÇÇ 112-41
287 238 2.7 10.124 GKS07 - 3MÇÇÇ 112-41
255 267 1.0 11.382 GKS06 - 3MÇÇÇ 112-41
255 267 1.8 11.378 GKS07 - 3MÇÇÇ 112-41
230 296 1.2 12.612 GKS06 - 3MÇÇÇ 112-41
228 298 2.2 12.711 GKS07 - 3MÇÇÇ 112-41
196 348 1.4 14.824 GKS06 - 3MÇÇÇ 112-41
196 347 2.4 14.798 GKS07 - 3MÇÇÇ 112-41

n1=1460 177 385 1.4 8.254 GKS07 - 3MÇÇÇ 132-22

159 427 1.7 9.171 GKS07 - 3MÇÇÇ 132-22
144 472 1.7 10.124 GKS07 - 3MÇÇÇ 132-22
128 530 1.2 11.378 GKS07 - 3MÇÇÇ 132-22
115 592 1.4 12.711 GKS07 - 3MÇÇÇ 132-22
119 572 2.8 12.283 GKS09 - 3MÇÇÇ 132-22

Thermal limit rating not considered (see page 2-7)

5-30 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

7.5 kW GKS ÇÇ -3M 5-86

n1=1460 99 690 1.5 14.798 GKS07 - 3MÇÇÇ 132-22
109 623 2.8 13.360 GKS09 - 3MÇÇÇ 132-22
88 777 1.4 16.674 GKS07 - 3MÇÇÇ 132-22
91 751 2.4 16.122 GKS09 - 3MÇÇÇ 132-22
85 805 1.2 17.270 GKS07 - 3MÇÇÇ 132-22
83 817 2.4 17.536 GKS09 - 3MÇÇÇ 132-22
71 956 1.2 20.511 GKS07 - 3MÇÇÇ 132-22
75 911 2.8 19.541 GKS09 - 3MÇÇÇ 132-22
63 1077 1.1 23.111 GKS07 - 3MÇÇÇ 132-22
66 1026 2.6 22.022 GKS09 - 3MÇÇÇ 132-22
58 1176 1.0 25.244 GKS07 - 3MÇÇÇ 132-22
57 1195 2.4 25.649 GKS09 - 3MÇÇÇ 132-22
52 1317 0.9 28.274 GKS07 - 3MÇÇÇ 132-22
50 1362 2.1 29.228 GKS09 - 3MÇÇÇ 132-22
44 1535 1.9 32.940 GKS09 - 3MÇÇÇ 132-22
42 1640 1.9 35.193 GKS09 - 3MÇÇÇ 132-22
37 1848 1.6 39.662 GKS09 - 3MÇÇÇ 132-22
36 1877 3.1 40.272 GKS11 - 3MÇÇÇ 132-22
34 2010 1.5 43.146 GKS09 - 3MÇÇÇ 132-22
33 2040 2.8 43.783 GKS11 - 3MÇÇÇ 132-22
30 2266 1.3 48.625 GKS09 - 3MÇÇÇ 132-22
30 2299 2.6 49.333 GKS11 - 3MÇÇÇ 132-22 5
25 2724 1.1 58.456 GKS09 - 3MÇÇÇ 132-22
25 2688 2.2 57.683 GKS11 - 3MÇÇÇ 132-22
22 3070 1.0 65.879 GKS09 - 3MÇÇÇ 132-22
23 3028 2.0 64.995 GKS11 - 3MÇÇÇ 132-22
21 3307 0.9 70.982 GKS09 - 3MÇÇÇ 132-22
21 3303 1.8 70.887 GKS11 - 3MÇÇÇ 132-22
18 3727 0.8 79.996 GKS09 - 3MÇÇÇ 132-22
18 3722 1.6 79.873 GKS11 - 3MÇÇÇ 132-22
19 3620 3.2 77.681 GKS14 - 3MÇÇÇ 132-22
16 4275 1.4 91.737 GKS11 - 3MÇÇÇ 132-22
16 4219 2.7 90.551 GKS14 - 3MÇÇÇ 132-22
14 4816 1.3 103.365 GKS11 - 3MÇÇÇ 132-22
14 4754 2.5 102.029 GKS14 - 3MÇÇÇ 132-22
13 5188 1.2 111.335 GKS11 - 3MÇÇÇ 132-22
13 5121 2.3 109.896 GKS14 - 3MÇÇÇ 132-22
12 5845 1.0 125.448 GKS11 - 3MÇÇÇ 132-22
12 5770 2.0 123.826 GKS14 - 3MÇÇÇ 132-22
11 6473 1.8 138.913 GKS14 - 3MÇÇÇ 132-22
9.3 7293 1.6 156.522 GKS14 - 3MÇÇÇ 132-22
7.8 8693 1.3 186.572 GKS14 - 3MÇÇÇ 132-22
7.0 9795 1.2 210.222 GKS14 - 3MÇÇÇ 132-22
6.5 10551 1.1 226.431 GKS14 - 3MÇÇÇ 132-22
5.7 11888 1.0 255.133 GKS14 - 3MÇÇÇ 132-22
5.1 13336 0.9 286.219 GKS14 - 3MÇÇÇ 132-22

9.2 kW GKS ÇÇ -3M 5-86

n1=2925 491 170 2.2 5.955 GKS07 - 3MÇÇÇ 132-21
354 236 1.8 8.254 GKS07 - 3MÇÇÇ 132-21

Thermal limit rating not considered (see page 2-7)

Lenze 5-31
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

9.2 kW GKS ÇÇ -3M 5-86

n1=2925 319 262 2.2 9.171 GKS07 - 3MÇÇÇ 132-21
289 289 2.2 10.124 GKS07 - 3MÇÇÇ 132-21
257 325 1.5 11.378 GKS07 - 3MÇÇÇ 132-21
230 363 1.8 12.711 GKS07 - 3MÇÇÇ 132-21
198 422 2.0 14.798 GKS07 - 3MÇÇÇ 132-21

n1=1450 176 475 1.1 8.254 GKS07 - 3MÇÇÇ 132-32

158 528 1.4 9.171 GKS07 - 3MÇÇÇ 132-32
143 583 1.4 10.124 GKS07 - 3MÇÇÇ 132-32
127 655 0.9 11.378 GKS07 - 3MÇÇÇ 132-32
114 732 1.1 12.711 GKS07 - 3MÇÇÇ 132-32
118 707 2.3 12.283 GKS09 - 3MÇÇÇ 132-32
98 852 1.2 14.798 GKS07 - 3MÇÇÇ 132-32
109 769 2.3 13.360 GKS09 - 3MÇÇÇ 132-32
87 960 1.1 16.674 GKS07 - 3MÇÇÇ 132-32
90 928 1.9 16.122 GKS09 - 3MÇÇÇ 132-32
84 994 1.0 17.270 GKS07 - 3MÇÇÇ 132-32
83 1009 1.9 17.536 GKS09 - 3MÇÇÇ 132-32
71 1180 0.9 20.511 GKS07 - 3MÇÇÇ 132-32
5 74 1125 2.3 19.541 GKS09 - 3MÇÇÇ 132-32
63 1330 0.9 23.111 GKS07 - 3MÇÇÇ 132-32
66 1267 2.1 22.022 GKS09 - 3MÇÇÇ 132-32
57 1453 0.8 25.244 GKS07 - 3MÇÇÇ 132-32
57 1476 1.9 25.649 GKS09 - 3MÇÇÇ 132-32
50 1682 1.7 29.228 GKS09 - 3MÇÇÇ 132-32
52 1613 3.2 28.021 GKS11 - 3MÇÇÇ 132-32
44 1896 1.6 32.940 GKS09 - 3MÇÇÇ 132-32
46 1817 3.0 31.573 GKS11 - 3MÇÇÇ 132-32
41 2025 1.5 35.193 GKS09 - 3MÇÇÇ 132-32
41 2057 2.8 35.741 GKS11 - 3MÇÇÇ 132-32
37 2283 1.3 39.662 GKS09 - 3MÇÇÇ 132-32
36 2318 2.5 40.272 GKS11 - 3MÇÇÇ 132-32
34 2483 1.2 43.146 GKS09 - 3MÇÇÇ 132-32
33 2520 2.3 43.783 GKS11 - 3MÇÇÇ 132-32
30 2798 1.1 48.625 GKS09 - 3MÇÇÇ 132-32
29 2839 2.1 49.333 GKS11 - 3MÇÇÇ 132-32
25 3364 0.9 58.456 GKS09 - 3MÇÇÇ 132-32
25 3320 1.8 57.683 GKS11 - 3MÇÇÇ 132-32
22 3791 0.8 65.879 GKS09 - 3MÇÇÇ 132-32
22 3741 1.6 64.995 GKS11 - 3MÇÇÇ 132-32
23 3648 3.2 63.382 GKS14 - 3MÇÇÇ 132-32
21 4080 1.5 70.887 GKS11 - 3MÇÇÇ 132-32
21 3968 2.9 68.942 GKS14 - 3MÇÇÇ 132-32
18 4597 1.3 79.873 GKS11 - 3MÇÇÇ 132-32
19 4471 2.6 77.681 GKS14 - 3MÇÇÇ 132-32
16 5280 1.1 91.737 GKS11 - 3MÇÇÇ 132-32
16 5211 2.2 90.551 GKS14 - 3MÇÇÇ 132-32
14 5949 1.0 103.365 GKS11 - 3MÇÇÇ 132-32
14 5872 2.0 102.029 GKS14 - 3MÇÇÇ 132-32
13 6407 0.9 111.335 GKS11 - 3MÇÇÇ 132-32
13 6325 1.9 109.896 GKS14 - 3MÇÇÇ 132-32

Thermal limit rating not considered (see page 2-7)

5-32 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

9.2 kW GKS ÇÇ -3M 5-86

n1=1450 12 7220 0.8 125.448 GKS11 - 3MÇÇÇ 132-32
12 7126 1.6 123.826 GKS14 - 3MÇÇÇ 132-32
10 7995 1.5 138.913 GKS14 - 3MÇÇÇ 132-32
9.3 9008 1.3 156.522 GKS14 - 3MÇÇÇ 132-32
7.8 10737 1.1 186.572 GKS14 - 3MÇÇÇ 132-32
6.9 12099 1.0 210.222 GKS14 - 3MÇÇÇ 132-32
6.4 13031 0.9 226.431 GKS14 - 3MÇÇÇ 132-32

GKS ÇÇ -4M 5-94

6.1 13434 0.9 237.467 GKS14 - 4MÇÇÇ 132-32

11 kW GKS ÇÇ -3M 5-86

n1=1460 245 407 1.2 5.955 GKS07 - 3MÇÇÇ 160-22
177 564 1.0 8.254 GKS07 - 3MÇÇÇ 160-22
159 627 1.2 9.171 GKS07 - 3MÇÇÇ 160-22
144 692 1.2 10.124 GKS07 - 3MÇÇÇ 160-22
115 869 1.0 12.711 GKS07 - 3MÇÇÇ 160-22
119 839 1.9 12.283 GKS09 - 3MÇÇÇ 160-22
99 1011 1.0 14.798 GKS07 - 3MÇÇÇ 160-22
109 913 1.9 13.360 GKS09 - 3MÇÇÇ 160-22
88 1140 0.9 16.674 GKS07 - 3MÇÇÇ 160-22
5
91 1102 1.6 16.122 GKS09 - 3MÇÇÇ 160-22
92 1085 2.9 15.874 GKS11 - 3MÇÇÇ 160-22
85 1180 0.9 17.270 GKS07 - 3MÇÇÇ 160-22
83 1198 1.6 17.536 GKS09 - 3MÇÇÇ 160-22
85 1180 2.9 17.265 GKS11 - 3MÇÇÇ 160-22
75 1335 1.9 19.541 GKS09 - 3MÇÇÇ 160-22
66 1505 1.8 22.022 GKS09 - 3MÇÇÇ 160-22
66 1503 3.3 21.989 GKS11 - 3MÇÇÇ 160-22
57 1753 1.6 25.649 GKS09 - 3MÇÇÇ 160-22
57 1751 2.9 25.615 GKS11 - 3MÇÇÇ 160-22
50 1997 1.5 29.228 GKS09 - 3MÇÇÇ 160-22
52 1915 2.7 28.021 GKS11 - 3MÇÇÇ 160-22
44 2251 1.3 32.940 GKS09 - 3MÇÇÇ 160-22
46 2158 2.6 31.573 GKS11 - 3MÇÇÇ 160-22
42 2405 1.3 35.193 GKS09 - 3MÇÇÇ 160-22
41 2443 2.3 35.741 GKS11 - 3MÇÇÇ 160-22
37 2711 1.1 39.662 GKS09 - 3MÇÇÇ 160-22
36 2752 2.1 40.272 GKS11 - 3MÇÇÇ 160-22
34 2949 1.0 43.146 GKS09 - 3MÇÇÇ 160-22
33 2992 1.9 43.783 GKS11 - 3MÇÇÇ 160-22
30 3323 0.9 48.625 GKS09 - 3MÇÇÇ 160-22
30 3371 1.8 49.333 GKS11 - 3MÇÇÇ 160-22
25 3942 1.5 57.683 GKS11 - 3MÇÇÇ 160-22
26 3844 3.0 56.251 GKS14 - 3MÇÇÇ 160-22
23 4442 1.4 64.995 GKS11 - 3MÇÇÇ 160-22
23 4332 2.7 63.382 GKS14 - 3MÇÇÇ 160-22
21 4844 1.2 70.887 GKS11 - 3MÇÇÇ 160-22
21 4712 2.4 68.942 GKS14 - 3MÇÇÇ 160-22
18 5459 1.1 79.873 GKS11 - 3MÇÇÇ 160-22
19 5309 2.2 77.681 GKS14 - 3MÇÇÇ 160-22

Thermal limit rating not considered (see page 2-7)

Lenze 5-33
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

11 kW GKS ÇÇ -3M 5-86

n1=1460 16 6188 1.9 90.551 GKS14 - 3MÇÇÇ 160-22
14 6973 1.7 102.029 GKS14 - 3MÇÇÇ 160-22
13 7510 1.6 109.896 GKS14 - 3MÇÇÇ 160-22
12 8462 1.4 123.826 GKS14 - 3MÇÇÇ 160-22
7.8 12750 0.9 186.572 GKS14 - 3MÇÇÇ 160-22
7.0 14367 0.8 210.222 GKS14 - 3MÇÇÇ 160-22

15 kW GKS ÇÇ -3M 5-86

n1=1460 245 555 0.9 5.955 GKS07 - 3MÇÇÇ 160-32
159 855 0.9 9.171 GKS07 - 3MÇÇÇ 160-32
144 943 0.9 10.124 GKS07 - 3MÇÇÇ 160-32
119 1145 1.4 12.283 GKS09 - 3MÇÇÇ 160-32
121 1127 2.5 12.094 GKS11 - 3MÇÇÇ 160-32
109 1245 1.4 13.360 GKS09 - 3MÇÇÇ 160-32
111 1226 2.5 13.154 GKS11 - 3MÇÇÇ 160-32
91 1502 1.2 16.122 GKS09 - 3MÇÇÇ 160-32
92 1479 2.1 15.874 GKS11 - 3MÇÇÇ 160-32
83 1634 1.2 17.536 GKS09 - 3MÇÇÇ 160-32
85 1609 2.1 17.265 GKS11 - 3MÇÇÇ 160-32
75 1821 1.4 19.541 GKS09 - 3MÇÇÇ 160-32
5 75 1819 2.5 19.515 GKS11 - 3MÇÇÇ 160-32
66 2052 1.3 22.022 GKS09 - 3MÇÇÇ 160-32
66 2049 2.4 21.989 GKS11 - 3MÇÇÇ 160-32
57 2390 1.2 25.649 GKS09 - 3MÇÇÇ 160-32
57 2387 2.1 25.615 GKS11 - 3MÇÇÇ 160-32
50 2724 1.1 29.228 GKS09 - 3MÇÇÇ 160-32
52 2611 2.0 28.021 GKS11 - 3MÇÇÇ 160-32
44 3070 1.0 32.940 GKS09 - 3MÇÇÇ 160-32
46 2942 1.9 31.573 GKS11 - 3MÇÇÇ 160-32
42 3280 0.9 35.193 GKS09 - 3MÇÇÇ 160-32
41 3331 1.7 35.741 GKS11 - 3MÇÇÇ 160-32
42 3233 3.1 34.692 GKS14 - 3MÇÇÇ 160-32
37 3696 0.8 39.662 GKS09 - 3MÇÇÇ 160-32
36 3753 1.6 40.272 GKS11 - 3MÇÇÇ 160-32
37 3643 3.0 39.089 GKS14 - 3MÇÇÇ 160-32
33 4080 1.4 43.783 GKS11 - 3MÇÇÇ 160-32
34 3964 2.7 42.531 GKS14 - 3MÇÇÇ 160-32
30 4597 1.3 49.333 GKS11 - 3MÇÇÇ 160-32
31 4466 2.5 47.923 GKS14 - 3MÇÇÇ 160-32
25 5376 1.1 57.683 GKS11 - 3MÇÇÇ 160-32
26 5242 2.2 56.251 GKS14 - 3MÇÇÇ 160-32
23 6057 1.0 64.995 GKS11 - 3MÇÇÇ 160-32
23 5907 1.9 63.382 GKS14 - 3MÇÇÇ 160-32
21 6606 0.9 70.887 GKS11 - 3MÇÇÇ 160-32
21 6425 1.8 68.942 GKS14 - 3MÇÇÇ 160-32
18 7443 0.8 79.873 GKS11 - 3MÇÇÇ 160-32
19 7239 1.6 77.681 GKS14 - 3MÇÇÇ 160-32
16 8438 1.4 90.551 GKS14 - 3MÇÇÇ 160-32
14 9508 1.2 102.029 GKS14 - 3MÇÇÇ 160-32
13 10241 1.2 109.896 GKS14 - 3MÇÇÇ 160-32
12 11539 1.0 123.826 GKS14 - 3MÇÇÇ 160-32

Thermal limit rating not considered (see page 2-7)

5-34 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

15 kW GKS ÇÇ -4M 5-94

n1=1460 11 12334 0.9 134.640 GKS14 - 4MÇÇÇ 160-32

18.5 kW GKS ÇÇ -3M 5-86

n1=1440 117 1431 1.1 12.283 GKS09 - 3MÇÇÇ 180-22
119 1409 2.0 12.094 GKS11 - 3MÇÇÇ 180-22
108 1557 1.1 13.360 GKS09 - 3MÇÇÇ 180-22
110 1533 2.0 13.154 GKS11 - 3MÇÇÇ 180-22
89 1879 1.0 16.122 GKS09 - 3MÇÇÇ 180-22
91 1850 1.7 15.874 GKS11 - 3MÇÇÇ 180-22
87 1940 2.8 16.646 GKS14 - 3MÇÇÇ 180-22
82 2043 1.0 17.536 GKS09 - 3MÇÇÇ 180-22
83 2012 1.7 17.265 GKS11 - 3MÇÇÇ 180-22
79 2134 2.8 18.311 GKS14 - 3MÇÇÇ 180-22
74 2277 1.1 19.541 GKS09 - 3MÇÇÇ 180-22
74 2274 2.0 19.515 GKS11 - 3MÇÇÇ 180-22
65 2566 1.0 22.022 GKS09 - 3MÇÇÇ 180-22
66 2562 1.9 21.989 GKS11 - 3MÇÇÇ 180-22
56 2989 1.0 25.649 GKS09 - 3MÇÇÇ 180-22
56 2985 1.7 25.615 GKS11 - 3MÇÇÇ 180-22
58 2878 2.8 24.696 GKS14 - 3MÇÇÇ 180-22
49 3406 0.9 29.228 GKS09 - 3MÇÇÇ 180-22
51 3265 1.6 28.021 GKS11 - 3MÇÇÇ 180-22
53 3166 2.8 27.165 GKS14 - 3MÇÇÇ 180-22
46 3679 1.5 31.573 GKS11 - 3MÇÇÇ 180-22
5
47 3567 2.8 30.609 GKS14 - 3MÇÇÇ 180-22
40 4165 1.4 35.741 GKS11 - 3MÇÇÇ 180-22
42 4043 2.5 34.692 GKS14 - 3MÇÇÇ 180-22
36 4693 1.3 40.272 GKS11 - 3MÇÇÇ 180-22
37 4555 2.4 39.089 GKS14 - 3MÇÇÇ 180-22
33 5102 1.1 43.783 GKS11 - 3MÇÇÇ 180-22
34 4956 2.2 42.531 GKS14 - 3MÇÇÇ 180-22
29 5749 1.0 49.333 GKS11 - 3MÇÇÇ 180-22
30 5585 2.0 47.923 GKS14 - 3MÇÇÇ 180-22
25 6722 0.9 57.683 GKS11 - 3MÇÇÇ 180-22
26 6555 1.8 56.251 GKS14 - 3MÇÇÇ 180-22
23 7386 1.6 63.382 GKS14 - 3MÇÇÇ 180-22
21 8034 1.4 68.942 GKS14 - 3MÇÇÇ 180-22
19 9052 1.3 77.681 GKS14 - 3MÇÇÇ 180-22
16 10552 1.1 90.551 GKS14 - 3MÇÇÇ 180-22
14 11890 1.0 102.029 GKS14 - 3MÇÇÇ 180-22
13 12806 0.9 109.896 GKS14 - 3MÇÇÇ 180-22
12 14430 0.8 123.826 GKS14 - 3MÇÇÇ 180-22

22 kW GKS ÇÇ -3M 5-86

n1=1465 119 1673 1.0 12.283 GKS09 - 3MÇÇÇ 180-32
121 1647 1.7 12.094 GKS11 - 3MÇÇÇ 180-32
110 1820 1.0 13.360 GKS09 - 3MÇÇÇ 180-32
111 1792 1.7 13.154 GKS11 - 3MÇÇÇ 180-32
91 2196 0.8 16.122 GKS09 - 3MÇÇÇ 180-32
92 2162 1.4 15.874 GKS11 - 3MÇÇÇ 180-32
88 2267 2.4 16.646 GKS14 - 3MÇÇÇ 180-32

Thermal limit rating not considered (see page 2-7)

Lenze 5-35
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

22 kW GKS ÇÇ -3M 5-86

n1=1465 84 2389 0.8 17.536 GKS09 - 3MÇÇÇ 180-32
85 2352 1.4 17.265 GKS11 - 3MÇÇÇ 180-32
80 2494 2.4 18.311 GKS14 - 3MÇÇÇ 180-32
75 2662 1.0 19.541 GKS09 - 3MÇÇÇ 180-32
75 2658 1.7 19.515 GKS11 - 3MÇÇÇ 180-32
67 3000 0.9 22.022 GKS09 - 3MÇÇÇ 180-32
67 2995 1.6 21.989 GKS11 - 3MÇÇÇ 180-32
57 3494 0.8 25.649 GKS09 - 3MÇÇÇ 180-32
57 3489 1.4 25.615 GKS11 - 3MÇÇÇ 180-32
59 3364 2.4 24.696 GKS14 - 3MÇÇÇ 180-32
52 3817 1.4 28.021 GKS11 - 3MÇÇÇ 180-32
54 3700 2.4 27.165 GKS14 - 3MÇÇÇ 180-32
46 4301 1.3 31.573 GKS11 - 3MÇÇÇ 180-32
48 4169 2.4 30.609 GKS14 - 3MÇÇÇ 180-32
41 4868 1.2 35.741 GKS11 - 3MÇÇÇ 180-32
42 4725 2.1 34.692 GKS14 - 3MÇÇÇ 180-32
36 5486 1.1 40.272 GKS11 - 3MÇÇÇ 180-32
38 5324 2.1 39.089 GKS14 - 3MÇÇÇ 180-32
34 5964 1.0 43.783 GKS11 - 3MÇÇÇ 180-32
34 5793 1.9 42.531 GKS14 - 3MÇÇÇ 180-32
30 6720 0.9 49.333 GKS11 - 3MÇÇÇ 180-32
31 6528 1.7 47.923 GKS14 - 3MÇÇÇ 180-32
5 26 7662 1.5 56.251 GKS14 - 3MÇÇÇ 180-32
23 8633 1.3 63.382 GKS14 - 3MÇÇÇ 180-32
21 9391 1.2 68.942 GKS14 - 3MÇÇÇ 180-32
19 10581 1.1 77.681 GKS14 - 3MÇÇÇ 180-32
16 12334 0.9 90.551 GKS14 - 3MÇÇÇ 180-32
14 13898 0.8 102.029 GKS14 - 3MÇÇÇ 180-32

30 kW GKS ÇÇ -3M 5-86

n1=1455 120 2262 1.2 12.094 GKS11 - 3MÇÇÇ 200-32
117 2326 1.7 12.435 GKS14 - 3MÇÇÇ 200-32
111 2460 1.2 13.154 GKS11 - 3MÇÇÇ 200-32
108 2529 1.7 13.525 GKS14 - 3MÇÇÇ 200-32
92 2969 1.0 15.874 GKS11 - 3MÇÇÇ 200-32
87 3113 1.7 16.646 GKS14 - 3MÇÇÇ 200-32
84 3229 1.0 17.265 GKS11 - 3MÇÇÇ 200-32
80 3425 1.7 18.311 GKS14 - 3MÇÇÇ 200-32
75 3650 1.2 19.515 GKS11 - 3MÇÇÇ 200-32
73 3753 1.7 20.065 GKS14 - 3MÇÇÇ 200-32
66 4112 1.2 21.989 GKS11 - 3MÇÇÇ 200-32
64 4228 1.7 22.609 GKS14 - 3MÇÇÇ 200-32
57 4791 1.0 25.615 GKS11 - 3MÇÇÇ 200-32
59 4619 1.7 24.696 GKS14 - 3MÇÇÇ 200-32
52 5241 1.0 28.021 GKS11 - 3MÇÇÇ 200-32
54 5081 1.7 27.165 GKS14 - 3MÇÇÇ 200-32
46 5905 0.9 31.573 GKS11 - 3MÇÇÇ 200-32
48 5725 1.7 30.609 GKS14 - 3MÇÇÇ 200-32
41 6684 0.9 35.741 GKS11 - 3MÇÇÇ 200-32
42 6488 1.5 34.692 GKS14 - 3MÇÇÇ 200-32
37 7311 1.5 39.089 GKS14 - 3MÇÇÇ 200-32
34 7954 1.4 42.531 GKS14 - 3MÇÇÇ 200-32

Thermal limit rating not considered (see page 2-7)

5-36 Lenze
 Selection tables – (Helical)-bevel gearboxes
Geared motors

50 Hz
Dim.
P1 n2 M2 c i (Helical)-bevel geared motors Page
[min-1] [Nm]

30 kW GKS ÇÇ -3M 5-86

n1=1455 30 8963 1.3 47.923 GKS14 - 3MÇÇÇ 200-32
26 10520 1.1 56.251 GKS14 - 3MÇÇÇ 200-32
23 11854 1.0 63.382 GKS14 - 3MÇÇÇ 200-32

37 kW GKS ÇÇ -3M 5-86

n1=1460 121 2780 1.0 12.094 GKS11 - 3MÇÇÇ 225-12
117 2858 1.4 12.435 GKS14 - 3MÇÇÇ 225-12
111 3024 1.0 13.154 GKS11 - 3MÇÇÇ 225-12
108 3109 1.4 13.525 GKS14 - 3MÇÇÇ 225-12
92 3649 0.9 15.874 GKS11 - 3MÇÇÇ 225-12
88 3826 1.4 16.646 GKS14 - 3MÇÇÇ 225-12
85 3969 0.9 17.265 GKS11 - 3MÇÇÇ 225-12
80 4209 1.4 18.311 GKS14 - 3MÇÇÇ 225-12
75 4486 1.0 19.515 GKS11 - 3MÇÇÇ 225-12
73 4612 1.4 20.065 GKS14 - 3MÇÇÇ 225-12
66 5055 1.0 21.989 GKS11 - 3MÇÇÇ 225-12
65 5197 1.4 22.609 GKS14 - 3MÇÇÇ 225-12
57 5888 0.9 25.615 GKS11 - 3MÇÇÇ 225-12
59 5677 1.4 24.696 GKS14 - 3MÇÇÇ 225-12
52 6441 0.8 28.021 GKS11 - 3MÇÇÇ 225-12
54 6244 1.4 27.165 GKS14 - 3MÇÇÇ 225-12
48 7036 1.4 30.609 GKS14 - 3MÇÇÇ 225-12 5
42 7975 1.3 34.692 GKS14 - 3MÇÇÇ 225-12
37 8985 1.2 39.089 GKS14 - 3MÇÇÇ 225-12
34 9777 1.1 42.531 GKS14 - 3MÇÇÇ 225-12
31 11016 1.0 47.923 GKS14 - 3MÇÇÇ 225-12
26 12930 0.9 56.251 GKS14 - 3MÇÇÇ 225-12

45 kW GKS ÇÇ -3M 5-86

n1=1475 122 3347 0.8 12.094 GKS11 - 3MÇÇÇ 225-22
119 3441 1.2 12.435 GKS14 - 3MÇÇÇ 225-22
112 3640 0.8 13.154 GKS11 - 3MÇÇÇ 225-22
109 3743 1.2 13.525 GKS14 - 3MÇÇÇ 225-22
89 4606 1.2 16.646 GKS14 - 3MÇÇÇ 225-22
81 5067 1.2 18.311 GKS14 - 3MÇÇÇ 225-22
76 5400 0.8 19.515 GKS11 - 3MÇÇÇ 225-22
74 5553 1.2 20.065 GKS14 - 3MÇÇÇ 225-22
67 6085 0.8 21.989 GKS11 - 3MÇÇÇ 225-22
65 6256 1.2 22.609 GKS14 - 3MÇÇÇ 225-22
60 6834 1.2 24.696 GKS14 - 3MÇÇÇ 225-22
54 7517 1.2 27.165 GKS14 - 3MÇÇÇ 225-22
48 8470 1.2 30.609 GKS14 - 3MÇÇÇ 225-22
43 9600 1.0 34.692 GKS14 - 3MÇÇÇ 225-22
38 10817 1.0 39.089 GKS14 - 3MÇÇÇ 225-22
35 11770 0.9 42.531 GKS14 - 3MÇÇÇ 225-22
31 13262 0.9 47.923 GKS14 - 3MÇÇÇ 225-22

Thermal limit rating not considered (see page 2-7)

Lenze 5-37
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 90 Nm

GKR 04 - 2 N Dimensions page 5-98

n1 2800 min-1 1400 min-1 700 min-1
IEC connection 63 71 80 63 71 80 63 71 80
63 71 63 71 63 71
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC 1A ÇB ÇC 1A ÇB ÇC
i P1perm [kW]
M2perm [Nm]
5.185 P1 2.23 3.04 1.37 1.87 0.73 1.02
M2 38 51 46 63 49 69
5.963 P1 2.23 3.03 1.37 1.87 0.73 0.93
M2 43 59 53 72 56 72
7.111 P1 2.23 2.73 1.37 1.68 0.73 0.84
M2 51 63 63 77 67 77
8.178 P1 2.23 2.49 1.37 1.53 0.73 0.77
M2 59 66 73 81 77 81
9.101 P1 2.23 2.33 1.37 1.43 0.72 0.72
M2 66 69 81 84 84 84
10.466 P1 2.12 2.12 1.31 1.31 0.65 0.65
M2 72 72 89 89 89 89
11.449 P1 1.03 1.97 1.97 0.64 1.21 1.21 0.32 0.61 0.61
M2 38 73 73 47 90 90 47 90 90
12.698 P1 0.96 1.78 1.78 0.59 1.09 1.09 0.30 0.55 0.55
M2 39 73 73 49 90 90 49 90 90
5 14.603 P1 0.96 1.55 1.55 0.59 0.95 0.95 0.30 0.48 0.48
M2 45 73 73 56 90 90 56 90 90
15.556 P1 1.45 1.45 0.89 0.89 0.45 0.45
M2 73 73 90 90 90 90
17.889 P1 1.26 1.26 0.78 0.78 0.39 0.39
M2 73 73 90 90 90 90
19.556 P1 1.05 1.15 1.15 0.65 0.71 0.71 0.32 0.36 0.36
M2 67 73 73 82 90 90 82 90 90
22.489 P1 1.00 1.00 1.00 0.62 0.62 0.62 0.31 0.31 0.31
M2 73 73 73 90 90 90 90 90 90
25.185 P1 1.00 1.02 1.02 0.54 0.55 0.55 0.27 0.28 0.28
M2 81 83 83 88 90 90 88 90 90
28.963 P1 0.89 0.89 0.89 0.48 0.48 0.48 0.24 0.24 0.24
M2 83 83 83 90 90 90 90 90 90
31.919 P1 0.80 0.80 0.44 0.44 0.22 0.22
M2 83 83 90 90 90 90
36.707 P1 0.70 0.70 0.38 0.38 0.19 0.19
M2 83 83 90 90 90 90
40.000 P1 0.64 0.64 0.35 0.35 0.17 0.17
M2 83 83 90 90 90 90
46.000 P1 0.60 0.60 0.30 0.30 0.15 0.15
M2 90 90 90 90 90 90
52.698 P1 0.40 0.20 0.10
M2 69 69 69
60.603 P1 0.40 0.20 0.10
M2 79 79 79

Thermal limit rating not considered (see page 2-7)

5-38 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 190 Nm

GKS 04 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 63 71 80 90 63 71 80 90 63 71 80 90
63 71 80 63 71 80 63 71 80
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD
i P1perm [kW]
M2perm [Nm]
5.123 P1 2.23 3.04 3.75 1.37 1.87 2.31 0.73 1.21 1.21
M2 37 50 62 46 62 77 48 80 80
7.026 P1 2.23 3.04 3.30 1.37 1.87 2.03 0.73 1.02 1.02
M2 51 69 75 63 85 93 66 93 93
8.167 P1 2.23 3.04 3.75 1.37 1.87 2.31 0.73 1.21 1.21
M2 59 80 99 73 99 122 77 128 128
8.991 P1 2.23 2.87 2.87 1.37 1.77 1.77 0.78 0.88 0.88
M2 65 84 84 80 103 103 90 103 103
9.836 P1 2.23 2.71 2.71 1.37 1.67 1.67 0.74 0.83 0.83
M2 71 86 86 88 106 106 94 106 106
11.730 P1 2.23 3.04 3.75 1.37 1.87 2.31 0.73 1.18 1.18
M2 85 115 143 104 142 175 110 180 180
13.067 P1 2.23 3.04 3.17 1.37 1.87 1.95 0.73 0.97 0.97
M2 95 129 134 116 158 165 123 165 165
14.333 P1 2.23 2.87 2.87 1.37 1.77 1.77 0.78 0.88 0.88
M2 104 133 133 128 164 164 144 164 164
16.087 P1 2.23 2.82 2.82 1.37 1.74 1.74 0.73 0.87 0.87 5
M2 116 147 147 143 181 181 151 181 181
17.920 P1 2.23 2.32 2.32 1.37 1.43 1.43 0.72 0.72 0.72
M2 130 135 135 160 166 166 166 166 166
20.588 P1 2.22 2.22 2.22 1.36 1.36 1.36 0.68 0.68 0.68
M2 148 148 148 182 182 182 182 182 182
22.522 P1 2.03 2.03 2.03 1.25 1.25 1.25 0.62 0.62 0.62
M2 148 148 148 182 182 182 182 182 182
25.088 P1 1.67 1.67 1.67 1.03 1.03 1.03 0.51 0.51 0.51
M2 136 136 136 167 167 167 167 167 167
28.727 P1 1.60 1.60 1.60 0.98 0.98 0.98 0.49 0.49 0.49
M2 149 149 149 183 183 183 183 183 183
32.000 P1 1.31 1.31 1.31 0.81 0.81 0.81 0.40 0.40 0.40
M2 136 136 136 167 167 167 167 167 167
35.191 P1 1.30 1.30 1.30 0.80 0.80 0.80 0.40 0.40 0.40
M2 149 149 149 183 183 183 183 183 183
39.200 P1 1.07 1.07 1.07 0.66 0.66 0.66 0.33 0.33 0.33
M2 136 136 136 168 168 168 168 168 168
44.240 P1 1.19 1.19 1.19 0.65 0.65 0.65 0.32 0.32 0.32
M2 171 171 171 185 185 185 185 185 185
50.943 P1 1.02 1.02 1.02 0.55 0.55 0.55 0.28 0.28 0.28
M2 168 168 168 182 182 182 182 182 182
56.976 P1 0.94 0.94 0.94 0.51 0.51 0.51 0.25 0.25 0.25
M2 173 173 173 187 187 187 187 187 187
64.978 P1 0.80 0.80 0.80 0.44 0.44 0.44 0.22 0.22 0.22
M2 169 169 169 183 183 183 183 183 183
72.210 P1 0.75 0.75 0.41 0.41 0.20 0.20
M2 175 175 190 190 190 190
79.599 P1 0.66 0.66 0.66 0.36 0.36 0.36 0.18 0.18 0.18
M2 169 169 169 183 183 183 183 183 183

Thermal limit rating not considered (see page 2-7)

Lenze 5-39
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 190 Nm

GKS 04 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 63 71 80 90 63 71 80 90 63 71 80 90
63 71 80 63 71 80 63 71 80
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD
i P1perm [kW]
M2perm [Nm]
90.491 P1 0.60 0.60 0.32 0.32 0.16 0.16
M2 175 175 190 190 190 190
100.067 P1 0.53 0.53 0.53 0.29 0.29 0.29 0.14 0.14 0.14
M2 171 171 171 185 185 185 185 185 185
111.467 P1 0.47 0.47 0.47 0.24 0.24 0.24 0.12 0.12 0.12
M2 170 170 170 170 170 170 170 170 170
128.874 P1 0.45 0.45 0.45 0.22 0.22 0.22 0.11 0.11 0.11
M2 187 187 187 187 187 187 187 187 187
143.556 P1 0.37 0.37 0.37 0.19 0.19 0.19 0.09 0.09 0.09
M2 172 172 172 172 172 172 172 172 172
163.332 P1 0.36 0.36 0.18 0.18 0.09 0.09
M2 190 190 190 190 190 190
181.939 P1 0.30 0.30 0.15 0.15 0.07 0.07
M2 174 174 174 174 174 174
204.682 P1 0.29 0.29 0.14 0.14 0.07 0.07
M2 190 190 190 190 190 190
5 228.000 P1 0.24 0.24 0.12 0.12 0.06 0.06
M2 177 177 177 177 177 177
269.660 P1 0.22 0.11 0.05
M2 190 190 190
300.381 P1 0.18 0.09 0.05
M2 178 178 178

Thermal limit rating not considered (see page 2-7)

5-40 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 331 Nm

GKS 05 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 71 80 90 100/112 71 80 90 100/112 71 80 90 100/112

71 80 80/90 71 80 80/90 71 80 80/90
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1B ÇC ÇD ÇE 1B ÇC ÇD ÇE 1B ÇC ÇD ÇE
i P1perm [kW]
M2perm [Nm]
6.863 P1 3.75 5.39 2.31 3.32 1.54 1.66
M2 83 120 103 147 137 147
9.412 P1 3.75 4.39 2.31 2.70 1.35 1.35
M2 114 134 141 165 165 165
10.569 P1 3.75 5.39 2.31 3.32 1.54 1.66
M2 128 184 158 227 211 227
11.667 P1 3.75 5.39 2.31 3.32 1.54 1.66
M2 142 204 175 251 233 251
13.177 P1 2.23 3.04 3.15 3.15 1.37 1.87 1.94 1.94 0.73 0.97 0.97 0.97
M2 95 130 134 134 117 160 165 165 124 165 165 165
14.494 P1 3.75 4.39 2.31 2.70 1.35 1.35
M2 176 206 217 254 254 254
16.000 P1 3.75 4.39 2.31 2.70 1.35 1.35
M2 194 227 239 280 280 280
17.054 P1 3.75 4.61 2.31 2.84 1.42 1.42
M2 207 255 255 313 313 313
19.216 P1 3.75 3.88 2.31 2.39 1.19 1.19 5
M2 233 241 287 297 297 297
23.388 P1 3.53 3.53 2.17 2.17 1.09 1.09
M2 267 267 329 329 329 329
26.353 P1 2.84 2.84 1.75 1.75 0.87 0.87
M2 242 242 298 298 298 298
29.931 P1 2.76 2.76 2.76 1.70 1.70 1.70 0.85 0.85 0.85
M2 268 268 268 330 330 330 330 330 330
32.744 P1 2.23 2.53 2.53 2.53 1.37 1.56 1.56 1.56 0.73 0.78 0.78 0.78
M2 237 269 269 269 292 331 331 331 308 331 331 331
36.894 P1 2.05 2.05 2.05 2.05 1.26 1.26 1.26 1.26 0.63 0.63 0.63 0.63
M2 245 245 245 245 302 302 302 302 302 302 302 302
41.765 P1 1.99 1.99 1.99 1.99 1.22 1.22 1.22 1.22 0.61 0.61 0.61 0.61
M2 269 269 269 269 331 331 331 331 331 331 331 331
47.059 P1 1.84 1.84 1.84 1.84 1.00 1.00 1.00 1.00 0.50 0.50 0.50 0.50
M2 281 281 281 281 304 304 304 304 304 304 304 304
51.162 P1 1.84 1.84 1.84 1.00 1.00 1.00 0.50 0.50 0.50
M2 305 305 305 331 331 331 331 331 331
57.647 P1 1.52 1.52 1.52 0.82 0.82 0.82 0.41 0.41 0.41
M2 283 283 283 307 307 307 307 307 307
66.592 P1 1.42 1.42 1.42 0.77 0.77 0.77 0.38 0.38 0.38
M2 305 305 305 331 331 331 331 331 331
75.033 P1 1.18 1.18 1.18 0.64 0.64 0.64 0.32 0.32 0.32
M2 286 286 286 310 310 310 310 310 310
82.833 P1 1.14 1.14 1.14 0.62 0.62 0.62 0.31 0.31 0.31
M2 305 305 305 331 331 331 331 331 331
93.333 P1 0.96 0.96 0.96 0.52 0.52 0.52 0.26 0.26 0.26
M2 291 291 291 315 315 315 315 315 315
107.196 P1 0.88 0.88 0.48 0.48 0.24 0.24
M2 305 305 331 331 331 331

Thermal limit rating not considered (see page 2-7)

Lenze 5-41
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 331 Nm

GKS 05 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 71 80 90 100/112 71 80 90 100/112 71 80 90 100/112

71 80 80/90 71 80 80/90 71 80 80/90
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1B ÇC ÇD ÇE 1B ÇC ÇD ÇE 1B ÇC ÇD ÇE
i P1perm [kW]
M2perm [Nm]
120.784 P1 0.81 0.81 0.40 0.40 0.20 0.20
M2 315 315 315 315 315 315
130.097 P1 0.79 0.79 0.39 0.39 0.20 0.20
M2 331 331 331 331 331 331
146.588 P1 0.66 0.66 0.33 0.33 0.17 0.17
M2 315 315 315 315 315 315
166.276 P1 0.61 0.31 0.15
M2 331 331 331
187.353 P1 0.52 0.26 0.13
M2 315 315 315
211.200 P1 0.46 0.46 0.23 0.23 0.12 0.12
M2 314 314 314 314 314 314
227.484 P1 0.38 0.38 0.19 0.19 0.09 0.09
M2 278 278 278 278 278 278
256.320 P1 0.38 0.38 0.19 0.19 0.09 0.09
M2 313 313 313 313 313 313
5 290.745 P1 0.29 0.15 0.07
M2 277 277 277
327.600 P1 0.29 0.15 0.07
M2 312 312 312

Thermal limit rating not considered (see page 2-7)

5-42 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 325 Nm

GKS 05 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1
IEC connection 63 71 80 63 71 80 63 71 80
63 71 63 71 63 71
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC 1A ÇB ÇC 1A ÇB ÇC
i P1perm [kW]
M2perm [Nm]
95.238 P1 0.51 0.51 0.51 0.28 0.28 0.28 0.14 0.14 0.14
M2 156 156 156 169 169 169 169 169 169
114.987 P1 0.68 0.68 0.68 0.34 0.34 0.34 0.17 0.17 0.17
M2 250 250 250 250 250 250 250 250 250
126.933 P1 0.70 0.70 0.70 0.35 0.35 0.35 0.18 0.18 0.18
M2 284 284 284 284 284 284 284 284 284
146.667 P1 0.54 0.54 0.54 0.27 0.27 0.27 0.13 0.13 0.13
M2 250 250 250 250 250 250 250 250 250
161.905 P1 0.55 0.55 0.55 0.28 0.28 0.28 0.14 0.14 0.14
M2 284 284 284 284 284 284 284 284 284
185.547 P1 0.55 0.55 0.55 0.28 0.28 0.28 0.14 0.14 0.14
M2 325 325 325 325 325 325 325 325 325
209.067 P1 0.47 0.47 0.47 0.24 0.24 0.24 0.12 0.12 0.12
M2 315 315 315 315 315 315 315 315 315
225.867 P1 0.35 0.35 0.35 0.17 0.17 0.17 0.09 0.09 0.09
M2 250 250 250 250 250 250 250 250 250
236.667 P1 0.43 0.43 0.43 0.22 0.22 0.22 0.11 0.11 0.11 5
M2 325 325 325 325 325 325 325 325 325
289.917 P1 0.35 0.35 0.18 0.18 0.09 0.09
M2 325 325 325 325 325 325
326.667 P1 0.30 0.30 0.15 0.15 0.08 0.08
M2 315 315 315 315 315 315
364.467 P1 0.28 0.28 0.28 0.14 0.14 0.14 0.07 0.07 0.07
M2 325 325 325 325 325 325 325 325 325
410.667 P1 0.24 0.24 0.24 0.12 0.12 0.12 0.06 0.06 0.06
M2 315 315 315 315 315 315 315 315 315
469.389 P1 0.22 0.22 0.22 0.11 0.11 0.11 0.05 0.05 0.05
M2 325 325 325 325 325 325 325 325 325
510.000 P1 0.18 0.18 0.09 0.09 0.04 0.04
M2 284 284 284 284 284 284
528.889 P1 0.19 0.19 0.19 0.09 0.09 0.09 0.05 0.05 0.05
M2 315 315 315 315 315 315 315 315 315
594.894 P1 0.17 0.17 0.09 0.09 0.04 0.04
M2 325 325 325 325 325 325
670.303 P1 0.15 0.15 0.07 0.07 0.04 0.04
M2 315 315 315 315 315 315
820.760 P1 0.12 0.12 0.12 0.06 0.06 0.06 0.03 0.03 0.03
M2 325 325 325 325 325 325 325 325 325
924.800 P1 0.11 0.11 0.11 0.05 0.05 0.05 0.03 0.03 0.03
M2 315 315 315 315 315 315 315 315 315
1040.215 P1 0.10 0.10 0.05 0.05 0.03 0.03
M2 325 325 325 325 325 325

Thermal limit rating not considered (see page 2-7)

Lenze 5-43
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 325 Nm

GKS 05 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1
IEC connection 63 71 80 63 71 80 63 71 80
63 71 63 71 63 71
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC 1A ÇB ÇC 1A ÇB ÇC
i P1perm [kW]
M2perm [Nm]
1172.073 P1 0.08 0.08 0.04 0.04 0.02 0.02
M2 315 315 315 315 315 315
1303.560 P1 0.08 0.08 0.04 0.04 0.02 0.02
M2 325 325 325 325 325 325
1468.800 P1 0.07 0.07 0.03 0.03 0.02 0.02
M2 315 315 315 315 315 315
1717.389 P1 0.06 0.03 0.02
M2 325 325 325
1935.086 P1 0.05 0.03 0.01
M2 315 315 315

Thermal limit rating not considered (see page 2-7)

5-44 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 702 Nm

GKS 06 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 71 80 90 100/112 100/112 71 80 90 100/112 100/112 71 80 90 100/112 100/112

71 80 80/90 90 71 80 80/90 90 71 80 80/90 90
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1B ÇC ÇD ÇE ÇF 1B ÇC ÇD ÇE ÇF 1B ÇC ÇD ÇE ÇF
i P1perm [kW]
M2perm [Nm]
6.485 P1 10.2 10.2 6.26 6.26 3.13 3.13
M2 214 214 263 263 263 263
9.196 P1 10.2 10.2 6.26 6.26 3.13 3.13
M2 303 303 373 373 373 373
10.147 P1 10.2 10.2 6.26 6.26 3.13 3.13
M2 334 334 412 412 412 412
11.382 P1 3.75 7.30 7.30 2.31 4.49 4.49 1.54 2.25 2.25
M2 138 269 269 170 331 331 227 331 331
12.612 P1 8.47 8.47 5.21 5.21 2.61 2.61
M2 346 346 426 426 426 426
14.824 P1 10.2 10.2 6.25 6.25 3.13 3.13
M2 488 488 600 600 600 600
16.699 P1 9.07 9.07 5.58 5.58 2.79 2.79
M2 491 491 604 604 604 604
17.809 P1 3.75 7.30 7.30 2.31 4.49 4.49 1.54 2.25 2.25
M2 216 421 421 266 518 518 355 518 518
20.329 P1 8.20 8.20 5.05 5.05 2.53 2.53 5
M2 540 540 665 665 665 665
22.902 P1 6.63 6.63 4.08 4.08 2.04 2.04
M2 492 492 606 606 606 606
26.017 P1 3.75 6.54 6.54 2.31 4.03 4.03 1.54 2.01 2.01
M2 316 551 551 389 679 679 519 679 679
28.461 P1 3.75 6.01 6.01 2.31 3.70 3.70 1.54 1.85 1.85
M2 346 554 554 426 682 682 568 682 682
32.063 P1 3.75 4.77 4.77 2.31 2.94 2.94 1.47 1.47 1.47
M2 390 495 495 480 610 610 610 610 610
36.303 P1 3.04 3.75 4.73 4.73 1.87 2.31 2.91 2.91 1.25 1.46 1.46 1.46
M2 357 441 556 556 440 543 685 685 586 685 685 685
41.472 P1 4.17 4.17 2.56 2.56 1.28 1.28
M2 560 560 689 689 689 689
44.471 P1 4.26 4.41 4.41 2.31 2.39 2.39 1.20 1.20 1.20
M2 614 636 636 665 689 689 689 689 689
53.074 P1 3.73 3.73 3.73 2.02 2.02 2.02 1.01 1.01 1.01
M2 641 641 641 695 695 695 695 695 695
57.882 P1 3.42 3.42 3.42 1.85 1.85 1.85 0.93 0.93 0.93
M2 641 641 641 695 695 695 695 695 695
65.207 P1 2.73 2.73 2.73 1.48 1.48 1.48 0.74 0.74 0.74
M2 576 576 576 624 624 624 624 624 624
72.000 P1 2.78 2.78 2.78 1.51 1.51 1.51 0.75 0.75 0.75
M2 648 648 648 702 702 702 702 702 702
81.111 P1 2.21 2.21 2.21 1.20 1.20 1.20 0.60 0.60 0.60
M2 581 581 581 630 630 630 630 630 630
93.177 P1 1.63 2.15 2.15 0.88 1.16 1.16 0.44 0.58 0.58
M2 491 648 648 532 702 702 532 702 702
104.967 P1 1.63 1.72 1.72 0.88 0.93 0.93 0.44 0.47 0.47
M2 553 586 586 599 635 635 599 635 635

Thermal limit rating not considered (see page 2-7)

Lenze 5-45
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 702 Nm

GKS 06 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 71 80 90 100/112 100/112 71 80 90 100/112 100/112 71 80 90 100/112 100/112

71 80 80/90 90 71 80 80/90 90 71 80 80/90 90
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1B ÇC ÇD ÇE ÇF 1B ÇC ÇD ÇE ÇF 1B ÇC ÇD ÇE ÇF
i P1perm [kW]
M2perm [Nm]
113.082 P1 1.47 1.92 1.92 0.74 0.96 0.96 0.37 0.48 0.48
M2 539 702 702 539 702 702 539 702 702
127.392 P1 1.47 1.54 1.54 0.74 0.77 0.77 0.37 0.39 0.39
M2 607 635 635 607 635 635 607 635 635
142.941 P1 1.18 1.52 0.59 0.76 0.30 0.38
M2 546 702 546 702 546 702
161.029 P1 1.18 1.22 0.59 0.61 0.30 0.30
M2 615 635 615 635 615 635
190.080 P1 1.14 1.14 1.14 0.57 0.57 0.57 0.29 0.29 0.29
M2 702 702 702 702 702 702 702 702 702
214.133 P1 0.92 0.92 0.92 0.46 0.46 0.46 0.23 0.23 0.23
M2 635 635 635 635 635 635 635 635 635
230.688 P1 0.94 0.94 0.94 0.47 0.47 0.47 0.24 0.24 0.24
M2 702 702 702 702 702 702 702 702 702
259.880 P1 0.75 0.75 0.75 0.38 0.38 0.38 0.19 0.19 0.19
M2 635 635 635 635 635 635 635 635 635
5 291.600 P1 0.74 0.74 0.37 0.37 0.19 0.19
M2 702 702 702 702 702 702
328.500 P1 0.60 0.60 0.30 0.30 0.15 0.15
M2 635 635 635 635 635 635

Thermal limit rating not considered (see page 2-7)

5-46 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 702 Nm

GKS 06 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 63 71 80 90 63 71 80 90 63 71 80 90
63 71 80 63 71 80 63 71 80
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD
i P1perm [kW]
M2perm [Nm]
103.721 P1 1.09 1.91 1.91 1.91 0.59 1.04 1.04 1.04 0.30 0.52 0.52 0.52
M2 360 632 632 632 390 685 685 685 390 685 685 685
113.205 P1 1.18 1.49 1.49 1.49 0.59 0.75 0.75 0.75 0.30 0.37 0.37 0.37
M2 425 537 537 537 425 537 537 537 425 537 537 537
127.059 P1 1.18 1.70 1.70 1.70 0.59 0.85 0.85 0.85 0.30 0.43 0.43 0.43
M2 478 689 689 689 478 689 689 689 478 689 689 689
140.816 P1 1.18 1.20 1.20 1.20 0.59 0.60 0.60 0.60 0.30 0.30 0.30 0.30
M2 529 537 537 537 529 537 537 537 529 537 537 537
155.647 P1 1.39 1.39 1.39 0.70 0.70 0.70 0.35 0.35 0.35
M2 689 689 689 689 689 689 689 689 689
174.336 P1 0.97 0.97 0.97 0.48 0.48 0.48 0.24 0.24 0.24
M2 537 537 537 537 537 537 537 537 537
202.588 P1 1.08 1.08 1.08 0.54 0.54 0.54 0.27 0.27 0.27
M2 695 695 695 695 695 695 695 695 695
224.524 P1 0.75 0.75 0.75 0.38 0.38 0.38 0.19 0.19 0.19
M2 537 537 537 537 537 537 537 537 537
252.000 P1 0.88 0.88 0.88 0.44 0.44 0.44 0.22 0.22 0.22 5
M2 702 702 702 702 702 702 702 702 702
279.286 P1 0.60 0.60 0.60 0.30 0.30 0.30 0.15 0.15 0.15
M2 537 537 537 537 537 537 537 537 537
316.800 P1 0.70 0.70 0.70 0.35 0.35 0.35 0.17 0.17 0.17
M2 702 702 702 702 702 702 702 702 702
361.429 P1 0.47 0.47 0.47 0.23 0.23 0.23 0.12 0.12 0.12
M2 537 537 537 537 537 537 537 537 537
408.000 P1 0.54 0.54 0.54 0.27 0.27 0.27 0.14 0.14 0.14
M2 702 702 702 702 702 702 702 702 702
458.067 P1 0.37 0.37 0.18 0.18 0.09 0.09
M2 537 537 537 537 537 537
517.091 P1 0.43 0.43 0.21 0.21 0.11 0.11
M2 702 702 702 702 702 702
555.927 P1 0.30 0.30 0.15 0.15 0.08 0.08
M2 537 537 537 537 537 537
640.800 P1 0.34 0.34 0.34 0.17 0.17 0.17 0.09 0.09 0.09
M2 702 702 702 702 702 702 702 702 702
696.668 P1 0.24 0.24 0.12 0.12 0.06 0.06
M2 537 537 537 537 537 537
812.137 P1 0.27 0.27 0.14 0.14 0.07 0.07
M2 702 702 702 702 702 702
914.907 P1 0.22 0.22 0.11 0.11 0.05 0.05
M2 635 635 635 635 635 635
1017.741 P1 0.22 0.22 0.11 0.11 0.05 0.05
M2 702 702 702 702 702 702

Thermal limit rating not considered (see page 2-7)

Lenze 5-47
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 702 Nm

GKS 06 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 63 71 80 90 63 71 80 90 63 71 80 90
63 71 80 63 71 80 63 71 80
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD 1A ÇB ÇC ÇD
i P1perm [kW]
M2perm [Nm]
1146.529 P1 0.17 0.17 0.09 0.09 0.04 0.04
M2 635 635 635 635 635 635
1340.834 P1 0.16 0.08 0.04
M2 702 702 702
1510.507 P1 0.13 0.07 0.03
M2 635 635 635

Thermal limit rating not considered (see page 2-7)

5-48 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 1330 Nm

GKS 07 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1
80 90 100/112 100/112 132 160 80 90 100/112 100/112 132 160 80 90 100/112 100/112 132 160
IEC connection
71 80 80/90 90 100/112 132 71 80 80/90 90 100/112 132 71 80 80/90 90 100/112 132

For the geometrical assignment servo/DC motors see chapter 2

Drive size ÇC ÇD ÇE ÇF ÇG ÇH ÇC ÇD ÇE ÇF ÇG ÇH ÇC ÇD ÇE ÇF ÇG ÇH
i P1perm [kW]
M2perm [Nm]
5.955 P1 10.7 19.8 19.8 6.60 12.2 12.2 4.40 6.10 6.10
M2 207 382 382 255 470 470 339 470 470
8.254 P1 10.7 16.4 16.4 6.60 10.1 10.1 4.40 5.05 5.05
M2 287 439 439 353 540 540 470 540 540
9.171 P1 10.7 19.8 19.8 6.60 12.2 12.2 4.40 6.10 6.10
M2 318 588 588 392 725 725 523 725 725
10.124 P1 10.7 19.8 19.8 6.60 12.2 12.2 4.40 6.10 6.10
M2 351 650 650 433 800 800 577 800 800
11.378 P1 10.7 10.7 13.5 13.5 6.60 6.60 8.32 8.32 4.16 4.16 4.16 4.16
M2 395 395 498 498 486 486 613 613 613 613 613 613
12.711 P1 10.7 16.4 16.4 6.60 10.1 10.1 4.40 5.05 5.05
M2 441 676 676 543 832 832 724 832 832
14.799 P1 10.7 17.6 17.6 6.60 10.9 10.9 4.40 5.42 5.42
M2 514 845 845 633 1040 1040 843 1040 1040
16.674 P1 10.7 16.1 16.1 6.60 9.91 9.91 4.40 4.96 4.96
M2 579 870 870 713 1071 1071 950 1071 1071
17.270 P1 10.7 10.7 14.5 14.5 6.60 6.60 8.92 8.92 4.40 4.40 4.46 4.46 5
M2 600 600 811 811 738 738 998 998 984 984 998 998
20.511 P1 10.7 13.6 13.6 6.60 8.35 8.35 4.18 4.18 4.18
M2 712 902 902 877 1110 1110 1110 1110 1110
23.111 P1 10.7 12.7 12.7 6.60 7.80 7.80 3.90 3.90 3.90
M2 802 949 949 988 1168 1168 1168 1168 1168
25.244 P1 10.7 10.7 11.7 11.7 6.60 6.60 7.20 7.20 3.60 3.60 3.60 3.60
M2 876 876 956 956 1079 1079 1177 1177 1177 1177 1177 1177
28.274 P1 10.7 10.7 10.7 10.7 6.56 6.56 6.56 6.56 3.28 3.28 3.28 3.28
M2 976 976 976 976 1202 1202 1202 1202 1202 1202 1202 1202
31.858 P1 9.22 9.22 9.22 9.22 5.68 5.68 5.68 5.68 2.84 2.84 2.84 2.84
M2 952 952 952 952 1172 1172 1172 1172 1172 1172 1172 1172
36.064 P1 3.75 8.97 8.97 8.97 2.31 5.52 5.52 5.52 1.54 2.76 2.76 2.76
M2 438 1048 1048 1048 540 1290 1290 1290 719 1290 1290 1290
40.906 P1 7.91 7.91 7.91 4.87 4.87 4.87 2.43 2.43 2.43
M2 1048 1048 1048 1290 1290 1290 1290 1290 1290
44.178 P1 8.38 8.38 8.38 4.54 4.54 4.54 2.27 2.27 2.27
M2 1200 1200 1200 1300 1300 1300 1300 1300 1300
50.346 P1 7.36 7.36 7.36 7.36 3.99 3.99 3.99 3.99 1.99 1.99 1.99 1.99
M2 1200 1200 1200 1200 1300 1300 1300 1300 1300 1300 1300 1300
57.501 P1 4.26 6.49 6.49 2.31 3.52 3.52 1.54 1.76 1.76
M2 794 1209 1209 860 1310 1310 1147 1310 1310
64.790 P1 4.26 5.25 5.25 2.31 2.85 2.85 1.42 1.42 1.42
M2 894 1103 1103 969 1195 1195 1195 1195 1195
70.474 P1 4.26 5.34 5.34 2.31 2.89 2.89 1.43 1.45 1.45
M2 973 1218 1218 1054 1320 1320 1307 1320 1320
79.407 P1 4.26 4.32 4.32 2.31 2.34 2.34 1.17 1.17 1.17
M2 1096 1112 1112 1188 1205 1205 1205 1205 1205
92.563 P1 3.11 4.09 4.09 1.69 2.22 2.22 0.84 1.11 1.11
M2 932 1227 1227 1010 1330 1330 1010 1330 1330

Thermal limit rating not considered (see page 2-7)

Lenze 5-49
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 1330 Nm

GKS 07 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1
80 90 100/112 100/112 132 160 80 90 100/112 100/112 132 160 80 90 100/112 100/112 132 160
IEC connection
71 80 80/90 90 100/112 132 71 80 80/90 90 100/112 132 71 80 80/90 90 100/112 132

For the geometrical assignment servo/DC motors see chapter 2

Drive size ÇC ÇD ÇE ÇF ÇG ÇH ÇC ÇD ÇE ÇF ÇG ÇH ÇC ÇD ÇE ÇF ÇG ÇH
i P1perm [kW]
M2perm [Nm]
104.296 P1 3.11 3.32 3.32 1.69 1.80 1.80 0.84 0.90 0.90
M2 1050 1121 1121 1138 1215 1215 1138 1215 1215
112.338 P1 2.81 3.65 3.65 1.41 1.83 1.83 0.70 0.91 0.91
M2 1024 1330 1330 1024 1330 1330 1024 1330 1330
126.578 P1 2.81 2.96 2.96 1.41 1.48 1.48 0.70 0.74 0.74
M2 1154 1215 1215 1154 1215 1215 1154 1215 1215
140.548 P1 2.92 2.92 2.92 1.46 1.46 1.46 0.73 0.73 0.73
M2 1330 1330 1330 1330 1330 1330 1330 1330 1330
158.364 P1 2.37 2.37 2.37 1.18 1.18 1.18 0.59 0.59 0.59
M2 1215 1215 1215 1215 1215 1215 1215 1215 1215
184.600 P1 2.22 2.22 2.22 1.11 1.11 1.11 0.56 0.56 0.56
M2 1330 1330 1330 1330 1330 1330 1330 1330 1330
208.000 P1 1.80 1.80 1.80 0.90 0.90 0.90 0.45 0.45 0.45
M2 1215 1215 1215 1215 1215 1215 1215 1215 1215
224.037 P1 1.83 1.83 1.83 0.92 0.92 0.92 0.46 0.46 0.46
M2 1330 1330 1330 1330 1330 1330 1330 1330 1330
5 252.436 P1 1.49 1.49 1.49 0.74 0.74 0.74 0.37 0.37 0.37
M2 1215 1215 1215 1215 1215 1215 1215 1215 1215
283.193 P1 1.45 1.45 0.73 0.73 0.36 0.36
M2 1330 1330 1330 1330 1330 1330
319.091 P1 1.18 1.18 0.59 0.59 0.29 0.29
M2 1215 1215 1215 1215 1215 1215

Thermal limit rating not considered (see page 2-7)

5-50 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 1330 Nm

GKS 07 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 71 80 90 100/112 71 80 90 100/112 71 80 90 100/112

71 80 80/90 71 80 80/90 71 80 80/90
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1B ÇC ÇD ÇE 1B ÇC ÇD ÇE 1B ÇC ÇD ÇE
i P1perm [kW]
M2perm [Nm]
103.039 P1 2.54 3.45 3.63 3.63 1.37 1.87 1.97 1.97 0.77 0.98 0.98 0.98
M2 832 1132 1190 1190 902 1227 1290 1290 1014 1290 1290 1290
112.391 P1 2.75 2.94 2.94 2.94 1.37 1.47 1.47 1.47 0.74 0.74 0.74 0.74
M2 984 1053 1053 1053 984 1053 1053 1053 1053 1053 1053 1053
126.222 P1 2.75 3.23 3.23 3.23 1.37 1.62 1.62 1.62 0.77 0.81 0.81 0.81
M2 1105 1300 1300 1300 1105 1300 1300 1300 1242 1300 1300 1300
137.748 P1 2.40 2.40 2.40 2.40 1.20 1.20 1.20 1.20 0.60 0.60 0.60 0.60
M2 1053 1053 1053 1053 1053 1053 1053 1053 1053 1053 1053 1053
154.622 P1 2.64 2.64 2.64 1.32 1.32 1.32 0.66 0.66 0.66
M2 1300 1300 1300 1300 1300 1300 1300 1300 1300
179.201 P1 1.85 1.85 1.85 0.92 0.92 0.92 0.46 0.46 0.46
M2 1053 1053 1053 1053 1053 1053 1053 1053 1053
201.254 P1 2.04 2.04 2.04 1.02 1.02 1.02 0.51 0.51 0.51
M2 1310 1310 1310 1310 1310 1310 1310 1310 1310
222.909 P1 1.48 1.48 1.48 0.74 0.74 0.74 0.37 0.37 0.37
M2 1053 1053 1053 1053 1053 1053 1053 1053 1053
246.659 P1 1.68 1.68 1.68 0.84 0.84 0.84 0.42 0.42 0.42
M2 1320 1320 1320 1320 1320 1320 1320 1320 1320 5
273.199 P1 1.21 1.21 1.21 0.61 0.61 0.61 0.30 0.30 0.30
M2 1053 1053 1053 1053 1053 1053 1053 1053 1053
321.049 P1 1.29 1.29 1.29 0.65 0.65 0.65 0.32 0.32 0.32
M2 1320 1320 1320 1320 1320 1320 1320 1320 1320
358.829 P1 0.92 0.92 0.92 0.46 0.46 0.46 0.23 0.23 0.23
M2 1053 1053 1053 1053 1053 1053 1053 1053 1053
399.353 P1 1.04 1.04 1.04 0.52 0.52 0.52 0.26 0.26 0.26
M2 1320 1320 1320 1320 1320 1320 1320 1320 1320
464.367 P1 0.71 0.71 0.36 0.36 0.18 0.18
M2 1053 1053 1053 1053 1053 1053
516.810 P1 0.80 0.80 0.40 0.40 0.20 0.20
M2 1320 1320 1320 1320 1320 1320
563.573 P1 0.59 0.59 0.29 0.29 0.15 0.15
M2 1053 1053 1053 1053 1053 1053
636.581 P1 0.66 0.66 0.66 0.33 0.33 0.33 0.16 0.16 0.16
M2 1330 1330 1330 1330 1330 1330 1330 1330 1330
683.972 P1 0.48 0.48 0.24 0.24 0.12 0.12
M2 1053 1053 1053 1053 1053 1053
823.810 P1 0.51 0.51 0.25 0.25 0.13 0.13
M2 1330 1330 1330 1330 1330 1330
928.237 P1 0.41 0.41 0.21 0.21 0.10 0.10
M2 1215 1215 1215 1215 1215 1215
999.806 P1 0.42 0.42 0.21 0.21 0.10 0.10
M2 1330 1330 1330 1330 1330 1330
1126.542 P1 0.34 0.34 0.17 0.17 0.09 0.09
M2 1215 1215 1215 1215 1215 1215
1277.842 P1 0.33 0.16 0.08
M2 1330 1330 1330
1439.822 P1 0.27 0.13 0.07
M2 1215 1215 1215

Thermal limit rating not considered (see page 2-7)

Lenze 5-51
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 3080 Nm

GKS 09 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1
80/90 100/112 100/112 132 160/180 200 80/90 100/112 100/112 132 160/180 200 80/90 100/112 100/112 132 160/180 200
IEC connection
80/90 90 100/112 132 80/90 90 100/112 132 80/90 90 100/112 132

For the geometrical assignment servo/DC motors see chapter 2

Drive size ÇD ÇE ÇF ÇG ÇH 1K ÇD ÇE ÇF ÇG ÇH 1K ÇD ÇE ÇF ÇG ÇH 1K
i P1perm [kW]
M2perm [Nm]
12.283 P1 28.6 33.0 33.0 17.6 20.3 20.3 10.2 10.2 10.2
M2 1137 1312 1312 1400 1615 1615 1615 1615 1615
13.360 P1 28.6 33.0 33.0 17.6 20.3 20.3 10.2 10.2 10.2
M2 1237 1427 1427 1523 1757 1757 1757 1757 1757
16.122 P1 10.7 28.0 28.0 28.0 6.60 17.2 17.2 17.2 4.40 8.62 8.62 8.62
M2 560 1462 1462 1462 689 1801 1801 1801 919 1801 1801 1801
17.536 P1 10.7 28.0 28.0 28.0 6.60 17.2 17.2 17.2 4.40 8.62 8.62 8.62
M2 609 1591 1591 1591 750 1958 1958 1958 999 1958 1958 1958
19.541 P1 28.6 33.0 33.0 17.6 20.3 20.3 10.2 10.2 10.2
M2 1809 2087 2087 2227 2570 2570 2570 2570 2570
22.022 P1 28.6 30.4 30.4 17.6 18.7 18.7 9.36 9.36 9.36
M2 2039 2170 2170 2510 2672 2672 2672 2672 2672
25.649 P1 10.7 28.0 28.0 28.0 6.60 17.2 17.2 17.2 4.40 8.61 8.61 8.61
M2 890 2325 2325 2325 1096 2862 2862 2862 1462 2862 2862 2862
29.228 P1 10.7 25.0 25.0 6.60 15.4 15.4 4.40 7.69 7.69
M2 1015 2367 2367 1249 2914 2914 1666 2914 2914
5 32.940 P1 10.7 22.7 22.7 6.60 14.0 14.0 4.40 6.99 6.99
M2 1143 2424 2424 1408 2984 2984 1877 2984 2984
35.193 P1 10.7 10.7 21.6 21.6 6.60 6.60 13.3 13.3 4.40 4.40 6.64 6.64
M2 1222 1222 2460 2460 1504 1504 3029 3029 2006 2006 3029 3029
39.662 P1 10.7 10.7 19.0 19.0 6.60 6.60 11.7 11.7 4.40 4.40 5.84 5.84
M2 1377 1377 2438 2438 1695 1695 3002 3002 2260 2260 3002 3002
43.146 P1 12.2 20.0 20.0 6.60 10.8 10.8 4.40 5.41 5.41
M2 1702 2790 2790 1844 3024 3024 2459 3024 3024
48.625 P1 12.2 17.7 17.7 6.60 9.58 9.58 4.40 4.79 4.79
M2 1918 2784 2784 2078 3017 3017 2771 3017 3017
58.456 P1 12.2 12.2 14.8 6.60 6.60 8.00 3.53 3.75 4.00
M2 2306 2306 2797 2499 2499 3031 2674 2838 3031
65.879 P1 12.2 12.2 13.2 6.60 6.60 7.14 3.53 3.57 3.57
M2 2598 2598 2813 2816 2816 3048 3013 3048 3048
70.982 P1 11.2 11.9 12.2 6.06 6.42 6.59 3.03 3.21 3.30
M2 2571 2726 2797 2786 2954 3031 2786 2954 3031
79.996 P1 10.9 10.9 10.9 5.93 5.93 5.93 2.96 2.96 2.96
M2 2834 2834 2834 3071 3071 3071 3071 3071 3071
91.860 P1 4.26 8.98 9.40 2.31 4.86 5.09 1.44 2.43 2.55
M2 1268 2671 2797 1374 2895 3031 1718 2895 3031
103.524 P1 4.26 8.47 8.47 2.31 4.59 4.59 1.44 2.30 2.30
M2 1429 2842 2842 1549 3080 3080 1936 3080 3080
111.484 P1 4.62 8.12 8.39 2.31 4.06 4.20 1.21 2.03 2.10
M2 1668 2934 3031 1668 2934 3031 1742 2934 3031
125.641 P1 4.62 7.57 7.57 2.31 3.78 3.78 1.21 1.89 1.89
M2 1880 3080 3080 1880 3080 3080 1963 3080 3080
140.921 P1 3.87 6.51 1.93 3.26 0.97 1.63
M2 1766 2973 1766 2973 1766 2973

Thermal limit rating not considered (see page 2-7)

5-52 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 3080 Nm

GKS 09 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1
80/90 100/112 100/112 132 160/180 200 80/90 100/112 100/112 132 160/180 200 80/90 100/112 100/112 132 160/180 200
IEC connection
80/90 90 100/112 132 80/90 90 100/112 132 80/90 90 100/112 132

For the geometrical assignment servo/DC motors see chapter 2

Drive size ÇD ÇE ÇF ÇG ÇH 1K ÇD ÇE ÇF ÇG ÇH 1K ÇD ÇE ÇF ÇG ÇH 1K
i P1perm [kW]
M2perm [Nm]
158.816 P1 3.87 5.99 1.93 2.99 0.97 1.50
M2 1990 3080 1990 3080 1990 3080
182.000 P1 4.62 5.14 5.14 2.31 2.57 2.57 1.29 1.29 1.29
M2 2723 3031 3031 2723 3031 3031 3031 3031 3031
205.111 P1 4.62 4.64 4.64 2.31 2.32 2.32 1.16 1.16 1.16
M2 3069 3080 3080 3069 3080 3080 3080 3080 3080
220.882 P1 4.24 4.24 4.24 2.12 2.12 2.12 1.06 1.06 1.06
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
248.930 P1 3.82 3.82 3.82 1.91 1.91 1.91 0.96 0.96 0.96
M2 3080 3080 3080 3080 3080 3080 3080 3080 3080
279.205 P1 3.35 3.35 1.68 1.68 0.84 0.84
M2 3031 3031 3031 3031 3031 3031
314.659 P1 3.02 3.02 1.51 1.51 0.76 0.76
M2 3080 3080 3080 3080 3080 3080

Thermal limit rating not considered (see page 2-7)

Lenze 5-53
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 3080 Nm

GKS 09 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 71 80 90 100/112 100/112 71 80 90 100/112 100/112 71 80 90 100/112 100/112

71 80 80/90 90 71 80 80/90 90 71 80 80/90 90
For the geometrical assignment servo/DC motors see chapter 2
Drive size 1B ÇC ÇD ÇE ÇF 1B ÇC ÇD ÇE ÇF 1B ÇC ÇD ÇE ÇF
i P1perm [kW]
M2perm [Nm]
100.551 P1 3.45 4.26 8.73 8.73 1.87 2.31 4.73 4.73 1.25 1.54 2.37 2.37
M2 1105 1364 2795 2795 1197 1479 3029 3029 1596 1972 3029 3029
113.320 P1 3.74 4.62 8.32 8.32 1.87 2.31 4.16 4.16 1.25 1.54 2.08 2.08
M2 1349 1666 3002 3002 1349 1666 3002 3002 1799 2222 3002 3002
123.275 P1 3.74 4.62 7.70 7.70 1.87 2.31 3.85 3.85 1.25 1.54 1.93 1.93
M2 1468 1813 3024 3024 1468 1813 3024 3024 1957 2417 3024 3024
138.929 P1 3.74 4.62 6.82 6.82 1.87 2.31 3.41 3.41 1.25 1.54 1.71 1.71
M2 1654 2043 3017 3017 1654 2043 3017 3017 2205 2724 3017 3017
151.012 P1 4.62 6.29 6.29 2.31 3.14 3.14 1.54 1.57 1.57
M2 2221 3024 3024 2221 3024 3024 2961 3024 3024
170.188 P1 4.62 5.57 5.57 2.31 2.78 2.78 1.39 1.39 1.39
M2 2503 3017 3017 2503 3017 3017 3017 3017 3017
204.596 P1 4.62 4.65 4.65 2.31 2.33 2.33 1.16 1.16 1.16
M2 3009 3031 3031 3009 3031 3031 3031 3031 3031
230.577 P1 4.15 4.15 4.15 2.08 2.08 2.08 1.04 1.04 1.04
M2 3048 3048 3048 3048 3048 3048 3048 3048 3048
248.439 P1 3.83 3.83 3.83 1.92 1.92 1.92 0.96 0.96 0.96
5 M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
279.986 P1 3.44 3.44 3.44 1.72 1.72 1.72 0.86 0.86 0.86
M2 3071 3071 3071 3071 3071 3071 3071 3071 3071
323.365 P1 2.94 2.94 2.94 1.47 1.47 1.47 0.74 0.74 0.74
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
364.427 P1 2.65 2.65 2.65 1.32 1.32 1.32 0.66 0.66 0.66
M2 3071 3071 3071 3071 3071 3071 3071 3071 3071
402.234 P1 2.37 2.37 2.37 1.18 1.18 1.18 0.59 0.59 0.59
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
453.311 P1 2.13 2.13 2.13 1.06 1.06 1.06 0.53 0.53 0.53
M2 3071 3071 3071 3071 3071 3071 3071 3071 3071
520.538 P1 1.83 1.83 1.83 0.91 0.91 0.91 0.46 0.46 0.46
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
586.638 P1 1.65 1.65 1.65 0.82 0.82 0.82 0.41 0.41 0.41
M2 3080 3080 3080 3080 3080 3080 3080 3080 3080
631.744 P1 1.51 1.51 1.51 0.75 0.75 0.75 0.38 0.38 0.38
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
711.965 P1 1.36 1.36 1.36 0.68 0.68 0.68 0.34 0.34 0.34
M2 3080 3080 3080 3080 3080 3080 3080 3080 3080
817.551 P1 1.16 1.16 1.16 0.58 0.58 0.58 0.29 0.29 0.29
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
921.367 P1 1.05 1.05 1.05 0.53 0.53 0.53 0.26 0.26 0.26
M2 3080 3080 3080 3080 3080 3080 3080 3080 3080
992.209 P1 0.96 0.96 0.96 0.48 0.48 0.48 0.24 0.24 0.24
M2 3031 3031 3031 3031 3031 3031 3031 3031 3031
1118.204 P1 0.87 0.87 0.87 0.43 0.43 0.43 0.22 0.22 0.22
M2 3080 3080 3080 3080 3080 3080 3080 3080 3080
1254.197 P1 0.76 0.76 0.38 0.38 0.19 0.19
M2 3031 3031 3031 3031 3031 3031
1413.461 P1 0.68 0.68 0.34 0.34 0.17 0.17
M2 3080 3080 3080 3080 3080 3080

Thermal limit rating not considered (see page 2-7)

5-54 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 6072 Nm

GKS 11 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 80/90/100 112 132 160/180 200/225 80/90/100 112 132 160/180 200/225 80/90/100 112 132 160/180 200/225
112 90/100 100/112 132 112 90/100 100/112 132 112 90/100 100/112 132

For the geometrical assignment servo/DC motors see chapter 2

Drive size ÇE ÇF ÇG ÇH ÇK ÇE ÇF ÇG ÇH ÇK ÇE ÇF ÇG ÇH ÇK
i P1perm [kW]
M2perm [Nm]
12.094 P1 57.4 57.4 35.4 35.4 17.7 17.7
M2 2250 2250 2770 2770 2770 2770
13.154 P1 57.4 57.4 35.4 35.4 17.7 17.7
M2 2447 2447 3013 3013 3013 3013
15.874 P1 48.8 48.8 30.0 30.0 15.0 15.0
M2 2509 2509 3089 3089 3089 3089
17.265 P1 48.8 48.8 30.0 30.0 15.0 15.0
M2 2729 2729 3360 3360 3360 3360
19.515 P1 57.4 57.4 35.4 35.4 17.7 17.7
M2 3630 3630 4470 4470 4470 4470
21.989 P1 55.7 55.7 34.3 34.3 17.1 17.1
M2 3967 3967 4884 4884 4884 4884
25.615 P1 48.8 48.8 30.0 30.0 15.0 15.0
M2 4049 4049 4985 4985 4985 4985
28.021 P1 28.6 46.2 46.2 17.6 28.4 28.4 11.7 14.2 14.2
M2 2594 4193 4193 3194 5163 5163 4259 5163 5163
31.573 P1 28.6 43.8 43.8 17.6 27.0 27.0 11.7 13.5 13.5 5
M2 2923 4484 4484 3599 5521 5521 4798 5521 5521
35.741 P1 10.7 28.6 39.7 39.7 6.60 17.6 24.4 24.4 4.40 11.7 12.2 12.2
M2 1241 3309 4593 4593 1528 4074 5655 5655 2037 5432 5655 5655
40.272 P1 10.7 28.6 36.5 36.5 6.60 17.6 22.5 22.5 4.40 11.3 11.3 11.3
M2 1398 3728 4767 4767 1721 4590 5869 5869 2295 5869 5869 5869
43.783 P1 32.5 37.7 37.7 17.6 20.4 20.4 10.2 10.2 10.2
M2 4605 5352 5352 4991 5800 5800 5800 5800 5800
49.333 P1 32.5 34.2 34.2 17.6 18.5 18.5 9.27 9.27 9.27
M2 5189 5466 5466 5623 5923 5923 5923 5923 5923
57.683 P1 12.2 29.5 29.5 6.60 16.0 16.0 4.40 7.99 7.99
M2 2275 5511 5511 2466 5972 5972 3287 5972 5972
64.995 P1 12.2 26.3 26.3 6.60 14.2 14.2 4.40 7.11 7.11
M2 2564 5529 5529 2778 5992 5992 3704 5992 5992
70.887 P1 12.2 24.0 24.0 6.60 13.0 13.0 3.92 6.50 6.50
M2 2796 5512 5512 3030 5973 5973 3600 5973 5973
79.873 P1 12.2 21.5 21.5 6.60 11.7 11.7 3.92 5.83 5.83
M2 3150 5566 5566 3414 6032 6032 4057 6032 6032
91.737 P1 10.9 11.6 18.6 5.91 6.30 10.1 2.95 3.15 5.03
M2 3239 3454 5513 3510 3743 5975 3510 3743 5975
103.365 P1 10.9 11.6 16.7 5.91 6.30 9.07 2.95 3.15 4.53
M2 3649 3892 5603 3955 4218 6072 3955 4218 6072
111.335 P1 9.87 10.5 16.6 4.93 5.26 8.28 2.47 2.63 4.14
M2 3559 3793 5975 3559 3793 5975 3559 3793 5975
125.448 P1 9.87 10.5 14.9 4.93 5.26 7.47 2.47 2.63 3.74
M2 4010 4274 6072 4010 4274 6072 4010 4274 6072
140.732 P1 7.92 8.43 3.96 4.22 1.98 2.11
M2 3609 3845 3609 3845 3609 3845
158.571 P1 7.92 8.43 3.96 4.22 1.98 2.11
M2 4067 4332 4067 4332 4067 4332

Thermal limit rating not considered (see page 2-7)

Lenze 5-55
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 6072 Nm

GKS 11 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 80/90/100 112 132 160/180 200/225 80/90/100 112 132 160/180 200/225 80/90/100 112 132 160/180 200/225
112 90/100 100/112 132 112 90/100 100/112 132 112 90/100 100/112 132

For the geometrical assignment servo/DC motors see chapter 2

Drive size ÇE ÇF ÇG ÇH ÇK ÇE ÇF ÇG ÇH ÇK ÇE ÇF ÇG ÇH ÇK
i P1perm [kW]
M2perm [Nm]
186.572 P1 9.89 9.89 9.89 4.94 4.94 4.94 2.47 2.47 2.47
M2 5975 5975 5975 5975 5975 5975 5975 5975 5975
210.222 P1 8.65 8.65 8.65 4.33 4.33 4.33 2.16 2.16 2.16
M2 5892 5892 5892 5892 5892 5892 5892 5892 5892
226.431 P1 8.15 8.15 8.15 4.07 4.07 4.07 2.04 2.04 2.04
M2 5975 5975 5975 5975 5975 5975 5975 5975 5975
255.133 P1 7.13 7.13 7.13 3.56 3.56 3.56 1.78 1.78 1.78
M2 5892 5892 5892 5892 5892 5892 5892 5892 5892
286.219 P1 6.44 6.44 3.22 3.22 1.61 1.61
M2 5975 5975 5975 5975 5975 5975
322.500 P1 5.64 5.64 2.82 2.82 1.41 1.41
M2 5892 5892 5892 5892 5892 5892

Thermal limit rating not considered (see page 2-7)

5-56 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 6072 Nm

GKS 11 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 80 90 100/112 100/112 132 80 90 100/112 100/112 132 80 90 100/112 100/112 132
71 80 80/90 90 100/112 71 80 80/90 90 100/112 71 80 80/90 90 100/112
For the geometrical assignment servo/DC motors see chapter 2
Drive size ÇC ÇD ÇE ÇF ÇG ÇC ÇD ÇE ÇF ÇG ÇC ÇD ÇE ÇF ÇG
i P1perm [kW]
M2perm [Nm]
102.119 P1 4.26 12.2 12.2 16.1 2.31 6.60 6.60 8.69 1.54 3.97 4.15 4.35
M2 1386 3959 3959 5218 1502 4291 4291 5655 2002 5160 5400 5655
115.063 P1 4.62 13.2 13.2 16.0 2.31 6.60 6.60 8.01 1.54 3.97 4.00 4.00
M2 1692 4835 4835 5869 1692 4835 4835 5869 2256 5814 5869 5869
125.095 P1 4.62 13.2 13.2 14.6 2.31 6.60 6.60 7.28 1.54 3.64 3.64 3.64
M2 1840 5256 5256 5800 1840 5256 5256 5800 2453 5800 5800 5800
140.952 P1 4.62 13.2 13.2 13.2 2.31 6.60 6.60 6.60 1.54 3.30 3.30 3.30
M2 2073 5922 5922 5923 2073 5922 5922 5923 2764 5923 5923 5923
153.242 P1 11.9 11.9 11.9 5.94 5.94 5.94 2.97 2.97 2.97
M2 5800 5800 5800 5800 5800 5800 5800 5800 5800
172.667 P1 10.8 10.8 10.8 5.39 5.39 5.39 2.69 2.69 2.69
M2 5923 5923 5923 5923 5923 5923 5923 5923 5923
201.890 P1 9.29 9.29 9.29 4.64 4.64 4.64 2.32 2.32 2.32
M2 5972 5972 5972 5972 5972 5972 5972 5972 5972
227.481 P1 8.27 8.27 8.27 4.14 4.14 4.14 2.07 2.07 2.07
M2 5992 5992 5992 5992 5992 5992 5992 5992 5992
248.106 P1 7.56 7.56 7.56 3.78 3.78 3.78 1.89 1.89 1.89
M2 5973 5973 5973 5973 5973 5973 5973 5973 5973 5
279.556 P1 6.78 6.78 6.78 3.39 3.39 3.39 1.69 1.69 1.69
M2 6032 6032 6032 6032 6032 6032 6032 6032 6032
322.931 P1 4.62 5.81 5.81 2.31 2.90 2.90 1.45 1.45 1.45
M2 4749 5973 5973 4749 5973 5973 5973 5973 5973
363.866 P1 4.62 5.21 5.21 2.31 2.60 2.60 1.30 1.30 1.30
M2 5351 6032 6032 5351 6032 6032 6032 6032 6032
395.787 P1 4.62 4.74 4.74 2.31 2.37 2.37 1.19 1.19 1.19
M2 5820 5973 5973 5820 5973 5973 5973 5973 5973
445.958 P1 4.25 4.25 4.25 2.12 2.12 2.12 1.06 1.06 1.06
M2 6032 6032 6032 6032 6032 6032 6032 6032 6032
512.195 P1 3.66 3.66 3.66 1.83 1.83 1.83 0.92 0.92 0.92
M2 5975 5975 5975 5975 5975 5975 5975 5975 5975
577.122 P1 3.30 3.30 3.30 1.65 1.65 1.65 0.83 0.83 0.83
M2 6072 6072 6072 6072 6072 6072 6072 6072 6072
621.619 P1 3.02 3.02 3.02 1.51 1.51 1.51 0.76 0.76 0.76
M2 5975 5975 5975 5975 5975 5975 5975 5975 5975
700.416 P1 2.72 2.72 2.72 1.36 1.36 1.36 0.68 0.68 0.68
M2 6072 6072 6072 6072 6072 6072 6072 6072 6072
816.455 P1 2.30 2.30 2.30 1.15 1.15 1.15 0.57 0.57 0.57
M2 5975 5975 5975 5975 5975 5975 5975 5975 5975
919.949 P1 2.07 2.07 2.07 1.04 1.04 1.04 0.52 0.52 0.52
M2 6072 6072 6072 6072 6072 6072 6072 6072 6072
990.879 P1 1.89 1.89 1.89 0.95 0.95 0.95 0.47 0.47 0.47
M2 5975 5975 5975 5975 5975 5975 5975 5975 5975
1116.484 P1 1.71 1.71 1.71 0.85 0.85 0.85 0.43 0.43 0.43
M2 6072 6072 6072 6072 6072 6072 6072 6072 6072
1252.516 P1 1.50 1.50 0.75 0.75 0.37 0.37
M2 5975 5975 5975 5975 5975 5975
1411.286 P1 1.35 1.35 0.68 0.68 0.34 0.34
M2 6072 6072 6072 6072 6072 6072

Thermal limit rating not considered (see page 2-7)

Lenze 5-57
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 11790 Nm

GKS 14 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1
IEC connection 100/112/132 160/180 200/225 100/112/132 160/180 200/225 100/112/132 160/180 200/225
132 132 132
For the geometrical assignment servo/DC motors see chapter 2
Drive size ÇG ÇH ÇK ÇG ÇH ÇK ÇG ÇH ÇK
i P1perm [kW]
M2perm [Nm]
12.435 P1 93.8 57.7 31.0
M2 3777 4651 4994
13.525 P1 93.8 57.7 31.0
M2 4108 5058 5432
16.646 P1 80.4 89.0 49.5 54.8 27.4 27.4
M2 4334 4797 5336 5906 5906 5906
18.311 P1 80.4 83.9 49.5 51.7 25.8 25.8
M2 4767 4978 5870 6130 6130 6130
20.065 P1 93.8 57.7 31.0
M2 6095 7505 8059
22.609 P1 93.8 57.7 31.0
M2 6868 8456 9073
24.696 P1 80.4 89.0 49.5 54.8 27.4 27.4
M2 6430 7117 7917 8763 8763 8763
27.165 P1 80.4 83.9 49.5 51.7 25.8 25.8
M2 7073 7386 8709 9094 9094 9094
5 30.609 P1 80.4 83.0 49.5 51.1 25.5 25.5
M2 7969 8229 9812 10132 10132 10132
34.692 P1 72.1 72.1 44.4 44.4 22.2 22.2
M2 8099 8099 9973 9973 9973 9973
39.089 P1 70.2 70.2 43.2 43.2 21.6 21.6
M2 8883 8883 10937 10937 10937 10937
42.531 P1 71.9 71.9 39.0 39.0 19.5 19.5
M2 9908 9908 10737 10737 10737 10737
47.923 P1 66.9 66.9 36.3 36.3 18.1 18.1
M2 10391 10391 11261 11261 11261 11261
56.251 P1 32.5 58.3 58.3 17.6 31.6 31.6 10.8 15.8 15.8
M2 5916 10632 10632 6412 11522 11522 7860 11522 11522
63.382 P1 32.5 51.6 51.6 17.6 28.0 28.0 10.8 14.0 14.0
M2 6666 10591 10591 7224 11477 11477 8856 11477 11477
68.942 P1 32.5 47.3 17.6 25.6 9.26 12.8
M2 7251 10569 7858 11454 8271 11454
77.681 P1 32.5 42.2 17.6 22.9 9.26 11.4
M2 8170 10630 8854 11520 9319 11520
90.551 P1 26.8 36.1 14.5 19.6 7.26 9.79
M2 7863 10601 8521 11488 8521 11488
102.029 P1 26.8 32.5 14.5 17.6 7.26 8.80
M2 8860 10740 9601 11639 9601 11639
109.896 P1 22.4 30.6 12.1 16.6 6.07 8.28
M2 7973 10879 8640 11790 8640 11790
123.826 P1 24.3 29.0 12.1 14.5 6.07 7.25
M2 9735 11639 9735 11639 9735 11639
138.913 P1 19.5 9.74 4.87
M2 8765 8765 8765
156.522 P1 19.5 9.74 4.87
M2 9876 9876 9876

Thermal limit rating not considered (see page 2-7)

5-58 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 11790 Nm

GKS 14 - 3 N Dimensions page 5-102

n1 2800 min-1 1400 min-1 700 min-1
IEC connection 100/112/132 160/180 200/225 100/112/132 160/180 200/225 100/112/132 160/180 200/225
132 132 132
For the geometrical assignment servo/DC motors see chapter 2
Drive size ÇG ÇH ÇK ÇG ÇH ÇK ÇG ÇH ÇK
i P1perm [kW]
M2perm [Nm]
186.572 P1 19.2 19.2 9.60 9.60 4.80 4.80
M2 11609 11609 11609 11609 11609 11609
210.222 P1 17.0 17.0 8.48 8.48 4.24 4.24
M2 11555 11555 11555 11555 11555 11555
226.431 P1 15.8 15.8 7.91 7.91 3.96 3.96
M2 11609 11609 11609 11609 11609 11609
255.133 P1 14.0 14.0 6.99 6.99 3.50 3.50
M2 11555 11555 11555 11555 11555 11555
286.219 P1 12.5 6.26 3.13
M2 11609 11609 11609
322.500 P1 11.1 5.53 2.77
M2 11555 11555 11555

Thermal limit rating not considered (see page 2-7)

Lenze 5-59
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with mounting flange for IEC standard motors

M2 perm ≤ 11639 Nm

GKS 14 - 4 N Dimensions page 5-106

n1 2800 min-1 1400 min-1 700 min-1

IEC connection 80/90 100/112 100/112 132 160/180 80/90 100/112 100/112 132 160/180 80/90 100/112 100/112 132 160/180
80/90 90 100/112 132 80/90 90 100/112 132 80/90 90 100/112 132
For the geometrical assignment servo/DC motors see chapter 2
Drive size ÇD ÇE ÇF ÇG ÇH ÇD ÇE ÇF ÇG ÇH ÇD ÇE ÇF ÇG ÇH
i P1perm [kW]
M2perm [Nm]
97.467 P1 12.2 12.2 29.7 29.7 6.60 6.60 16.1 16.1 4.40 4.40 8.03 8.03
M2 3779 3779 9202 9202 4095 4095 9973 9973 5460 5460 9973 9973
109.822 P1 12.2 12.2 28.9 28.9 6.60 6.60 15.6 15.6 4.40 4.40 7.82 7.82
M2 4258 4258 10093 10093 4614 4614 10937 10937 6153 6153 10937 10937
119.493 P1 13.2 13.2 28.2 28.2 6.60 6.60 14.1 14.1 4.40 4.40 7.05 7.05
M2 5021 5021 10737 10737 5021 5021 10737 10737 6694 6694 10737 10737
134.640 P1 13.2 13.2 26.3 26.3 6.60 6.60 13.1 13.1 4.40 4.40 6.57 6.57
M2 5657 5657 11261 11261 5657 5657 11261 11261 7543 7543 11261 11261
158.039 P1 13.2 13.2 22.9 22.9 6.60 6.60 11.5 11.5 4.40 4.40 5.72 5.72
M2 6640 6640 11522 11522 6640 6640 11522 11522 8854 8854 11522 11522
178.072 P1 13.2 13.2 20.2 20.2 6.60 6.60 10.1 10.1 4.40 4.40 5.06 5.06
M2 7482 7482 11477 11477 7482 7482 11477 11477 9976 9976 11477 11477
193.754 P1 13.2 18.7 18.7 6.60 9.34 9.34 4.40 4.67 4.67
M2 8141 11522 11522 8141 11522 11522 10855 11522 11522
218.315 P1 13.2 16.5 16.5 6.60 8.25 8.25 4.13 4.13 4.13
M2 9173 11477 11477 9173 11477 11477 11477 11477 11477
237.467 P1 13.2 15.2 15.2 6.60 7.57 7.57 3.79 3.79 3.79
5 M2 9978 11454 11454 9978 11454 11454 11454 11454 11454
267.568 P1 13.2 13.5 13.5 6.60 6.76 6.76 3.38 3.38 3.38
M2 11242 11520 11520 11242 11520 11520 11520 11520 11520
321.729 P1 11.2 11.2 11.2 5.59 5.59 5.59 2.80 2.80 2.80
M2 11454 11454 11454 11454 11454 11454 11454 11454 11454
362.512 P1 9.98 9.98 9.98 4.99 4.99 4.99 2.50 2.50 2.50
M2 11520 11520 11520 11520 11520 11520 11520 11520 11520
390.672 P1 9.21 9.21 9.21 4.60 4.60 4.60 2.30 2.30 2.30
M2 11454 11454 11454 11454 11454 11454 11454 11454 11454
440.193 P1 8.22 8.22 8.22 4.11 4.11 4.11 2.05 2.05 2.05
M2 11520 11520 11520 11520 11520 11520 11520 11520 11520
513.121 P1 7.03 7.03 7.03 3.52 3.52 3.52 1.76 1.76 1.76
M2 11488 11488 11488 11488 11488 11488 11488 11488 11488
578.164 P1 6.32 6.32 6.32 3.16 3.16 3.16 1.58 1.58 1.58
M2 11639 11639 11639 11639 11639 11639 11639 11639 11639
622.742 P1 5.79 5.79 5.79 2.90 2.90 2.90 1.45 1.45 1.45
M2 11488 11488 11488 11488 11488 11488 11488 11488 11488
701.681 P1 5.21 5.21 5.21 2.60 2.60 2.60 1.30 1.30 1.30
M2 11639 11639 11639 11639 11639 11639 11639 11639 11639
805.901 P1 4.48 4.48 4.48 2.24 2.24 2.24 1.12 1.12 1.12
M2 11488 11488 11488 11488 11488 11488 11488 11488 11488
908.058 P1 4.03 4.03 4.03 2.01 2.01 2.01 1.01 1.01 1.01
M2 11639 11639 11639 11639 11639 11639 11639 11639 11639
978.071 P1 3.69 3.69 3.69 1.84 1.84 1.84 0.92 0.92 0.92
M2 11488 11488 11488 11488 11488 11488 11488 11488 11488
1102.052 P1 3.32 3.32 3.32 1.66 1.66 1.66 0.83 0.83 0.83
M2 11639 11639 11639 11639 11639 11639 11639 11639 11639
1236.326 P1 2.92 2.92 1.46 1.46 0.73 0.73
M2 11488 11488 11488 11488 11488 11488
1393.043 P1 2.62 2.62 1.31 1.31 0.66 0.66
M2 11639 11639 11639 11639 11639 11639

Thermal limit rating not considered (see page 2-7)

5-60 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 190 Nm

GKS 04 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1A 1B 1C 1A 1B 1C 1A 1B 1C
i P1perm [kW]
M2perm [Nm]
5.123 P1 2.36 3.88 1.45 2.39 0.73 1.20
M2 39 64 48 79 48 79
7.026 P1 2.36 3.30 1.45 2.03 0.73 1.02
M2 54 75 66 93 66 93
8.167 P1 2.36 3.88 1.45 2.39 0.73 1.20
M2 62 103 77 126 77 126
8.991 P1 2.71 2.87 1.67 1.77 0.83 0.88
M2 79 84 97 103 97 103
9.836 P1 2.68 2.71 1.65 1.67 0.83 0.83
M2 85 86 105 106 105 106
11.730 P1 2.36 3.85 1.45 2.37 0.73 1.18
M2 90 146 110 180 110 180
13.067 P1 2.36 3.17 1.45 1.95 0.73 0.97
M2 100 134 123 165 123 165
14.333 P1 2.71 2.87 1.67 1.77 0.83 0.88
M2 126 133 155 164 155 164
16.087 P1 2.36 2.82 1.45 1.74 0.73 0.87
M2 123 147 151 181 151 181
17.920 P1 2.32 2.32 1.43 1.43 0.72 0.72
M2 135 135 166 166 166 166
20.588 P1
M2
2.22
148
2.22
148
1.36
182
1.36
182
0.68
182
0.68
182
5
22.522 P1 2.03 2.03 1.25 1.25 0.62 0.62
M2 148 148 182 182 182 182
25.088 P1 1.67 1.67 1.03 1.03 0.51 0.51
M2 136 136 167 167 167 167
28.727 P1 1.60 1.60 0.98 0.98 0.49 0.49
M2 149 149 183 183 183 183
32.000 P1 1.31 1.31 0.81 0.81 0.40 0.40
M2 136 136 167 167 167 167
35.191 P1 1.30 1.30 0.80 0.80 0.40 0.40
M2 149 149 183 183 183 183
39.200 P1 1.07 1.07 0.66 0.66 0.33 0.33
M2 136 136 168 168 168 168
44.240 P1 1.05 1.05 1.05 0.65 0.65 0.65 0.32 0.32 0.32
M2 150 150 150 185 185 185 185 185 185
50.943 P1 0.90 0.90 0.55 0.55 0.28 0.28
M2 148 148 182 182 182 182
56.976 P1 0.82 0.82 0.82 0.51 0.51 0.51 0.25 0.25 0.25
M2 152 152 152 187 187 187 187 187 187
64.978 P1 0.71 0.71 0.44 0.44 0.22 0.22
M2 149 149 183 183 183 183
72.210 P1 0.66 0.66 0.41 0.41 0.20 0.20
M2 154 154 190 190 190 190
79.599 P1 0.58 0.58 0.36 0.36 0.18 0.18
M2 149 149 183 183 183 183
90.491 P1 0.53 0.53 0.32 0.32 0.16 0.16
M2 154 154 190 190 190 190
100.067 P1 0.46 0.46 0.46 0.29 0.29 0.29 0.14 0.14 0.14
M2 150 150 150 185 185 185 185 185 185
111.467 P1 0.38 0.38 0.38 0.24 0.24 0.24 0.12 0.12 0.12
M2 138 138 138 170 170 170 170 170 170

Thermal limit rating not considered (see page 2-7)

Lenze 5-61
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 190 Nm

GKS 04 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1A 1B 1C 1A 1B 1C 1A 1B 1C
i P1perm [kW]
M2perm [Nm]
128.874 P1 0.36 0.36 0.36 0.22 0.22 0.22 0.11 0.11 0.11
M2 152 152 152 187 187 187 187 187 187
143.556 P1 0.30 0.30 0.30 0.19 0.19 0.19 0.09 0.09 0.09
M2 140 140 140 172 172 172 172 172 172
163.332 P1 0.29 0.29 0.18 0.18 0.09 0.09
M2 154 154 190 190 190 190
181.939 P1 0.24 0.24 0.15 0.15 0.07 0.07
M2 141 141 174 174 174 174
204.682 P1 0.23 0.23 0.14 0.14 0.07 0.07
M2 154 154 190 190 190 190
228.000 P1 0.20 0.20 0.12 0.12 0.06 0.06
M2 144 144 177 177 177 177
269.660 P1 0.18 0.11 0.05
M2 154 190 190
300.381 P1 0.15 0.09 0.05
M2 145 178 178

Thermal limit rating not considered (see page 2-7)

5-62 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 331 Nm

GKS 05 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1B 1C 1D 1B 1C 1D 1B 1C 1D
i P1perm [kW]
M2perm [Nm]
6.863 P1 5.39 3.32 1.66
M2 120 147 147
9.412 P1 4.39 2.70 1.35
M2 134 165 165
10.569 P1 5.39 3.32 1.66
M2 184 227 227
11.667 P1 5.39 3.32 1.66
M2 204 251 251
13.177 P1 2.36 3.15 3.15 1.45 1.94 1.94 0.73 0.97 0.97
M2 101 134 134 124 165 165 124 165 165
14.494 P1 4.39 2.70 1.35
M2 206 254 254
16.000 P1 4.39 2.70 1.35
M2 227 280 280
17.054 P1 4.61 2.84 1.42
M2 255 313 313
19.216 P1 3.88 2.39 1.19
M2 241 297 297
23.388 P1 3.53 2.17 1.09
M2 267 329 329
26.353 P1
M2
2.84
242
1.75
298
0.87
298
5
29.931 P1 2.76 2.76 1.70 1.70 0.85 0.85
M2 268 268 330 330 330 330
32.744 P1 2.36 2.53 2.53 1.45 1.56 1.56 0.73 0.78 0.78
M2 250 269 269 308 331 331 308 331 331
36.894 P1 2.05 2.05 2.05 1.26 1.26 1.26 0.63 0.63 0.63
M2 245 245 245 302 302 302 302 302 302
41.765 P1 1.99 1.99 1.99 1.22 1.22 1.22 0.61 0.61 0.61
M2 269 269 269 331 331 331 331 331 331
47.059 P1 1.62 1.62 1.62 1.00 1.00 1.00 0.50 0.50 0.50
M2 247 247 247 304 304 304 304 304 304
51.162 P1 1.62 1.62 1.00 1.00 0.50 0.50
M2 269 269 331 331 331 331
57.647 P1 1.34 1.34 0.82 0.82 0.41 0.41
M2 249 249 307 307 307 307
66.592 P1 1.25 1.25 1.25 0.77 0.77 0.77 0.38 0.38 0.38
M2 269 269 269 331 331 331 331 331 331
75.033 P1 1.04 1.04 1.04 0.64 0.64 0.64 0.32 0.32 0.32
M2 252 252 252 310 310 310 310 310 310
82.833 P1 1.00 1.00 1.00 0.62 0.62 0.62 0.31 0.31 0.31
M2 269 269 269 331 331 331 331 331 331
93.333 P1 0.85 0.85 0.85 0.52 0.52 0.52 0.26 0.26 0.26
M2 256 256 256 315 315 315 315 315 315
107.196 P1 0.77 0.77 0.48 0.48 0.24 0.24
M2 269 269 331 331 331 331
120.784 P1 0.65 0.65 0.40 0.40 0.20 0.20
M2 256 256 315 315 315 315
130.097 P1 0.64 0.64 0.39 0.39 0.20 0.20
M2 269 269 331 331 331 331
146.588 P1 0.54 0.54 0.33 0.33 0.17 0.17
M2 256 256 315 315 315 315

Thermal limit rating not considered (see page 2-7)

Lenze 5-63
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 331 Nm

GKS 05 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1B 1C 1D 1B 1C 1D 1B 1C 1D
i P1perm [kW]
M2perm [Nm]
166.276 P1 0.50 0.31 0.15
M2 269 331 331
187.353 P1 0.42 0.26 0.13
M2 256 315 315
211.200 P1 0.37 0.37 0.23 0.23 0.12 0.12
M2 255 255 314 314 314 314
227.484 P1 0.31 0.31 0.19 0.19 0.09 0.09
M2 226 226 278 278 278 278
256.320 P1 0.31 0.31 0.19 0.19 0.09 0.09
M2 254 254 313 313 313 313
290.745 P1 0.24 0.15 0.07
M2 225 277 277
327.600 P1 0.24 0.15 0.07
M2 253 312 312

Thermal limit rating not considered (see page 2-7)

5-64 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 325 Nm

GKS 05 - 4 W Dimensions page 5-111

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1A 1B 1C 1A 1B 1C 1A 1B 1C
i P1perm [kW]
M2perm [Nm]
95.238 P1 0.45 0.45 0.45 0.28 0.28 0.28 0.14 0.14 0.14
M2 137 137 137 169 169 169 169 169 169
114.987 P1 0.55 0.55 0.55 0.34 0.34 0.34 0.17 0.17 0.17
M2 203 203 203 250 250 250 250 250 250
126.933 P1 0.57 0.57 0.57 0.35 0.35 0.35 0.18 0.18 0.18
M2 230 230 230 284 284 284 284 284 284
146.667 P1 0.44 0.44 0.44 0.27 0.27 0.27 0.13 0.13 0.13
M2 203 203 203 250 250 250 250 250 250
161.905 P1 0.45 0.45 0.45 0.28 0.28 0.28 0.14 0.14 0.14
M2 230 230 230 284 284 284 284 284 284
185.547 P1 0.45 0.45 0.45 0.28 0.28 0.28 0.14 0.14 0.14
M2 264 264 264 325 325 325 325 325 325
209.067 P1 0.38 0.38 0.38 0.24 0.24 0.24 0.12 0.12 0.12
M2 256 256 256 315 315 315 315 315 315
225.867 P1 0.28 0.28 0.28 0.17 0.17 0.17 0.09 0.09 0.09
M2 203 203 203 250 250 250 250 250 250
236.667 P1 0.35 0.35 0.35 0.22 0.22 0.22 0.11 0.11 0.11
M2 264 264 264 325 325 325 325 325 325
289.917 P1 0.29 0.29 0.18 0.18 0.09 0.09
M2 264 264 325 325 325 325
326.667 P1
M2
0.25
256
0.25
256
0.15
315
0.15
315
0.08
315
0.08
315
5
364.467 P1 0.23 0.23 0.23 0.14 0.14 0.14 0.07 0.07 0.07
M2 264 264 264 325 325 325 325 325 325
410.667 P1 0.20 0.20 0.20 0.12 0.12 0.12 0.06 0.06 0.06
M2 256 256 256 315 315 315 315 315 315
469.389 P1 0.18 0.18 0.18 0.11 0.11 0.11 0.05 0.05 0.05
M2 264 264 264 325 325 325 325 325 325
510.000 P1 0.14 0.14 0.09 0.09 0.04 0.04
M2 230 230 284 284 284 284
528.889 P1 0.15 0.15 0.15 0.09 0.09 0.09 0.05 0.05 0.05
M2 256 256 256 315 315 315 315 315 315
594.894 P1 0.14 0.14 0.09 0.09 0.04 0.04
M2 264 264 325 325 325 325
670.303 P1 0.12 0.12 0.07 0.07 0.04 0.04
M2 256 256 315 315 315 315
820.760 P1 0.10 0.10 0.10 0.06 0.06 0.06 0.03 0.03 0.03
M2 264 264 264 325 325 325 325 325 325
924.800 P1 0.09 0.09 0.09 0.05 0.05 0.05 0.03 0.03 0.03
M2 256 256 256 315 315 315 315 315 315
1040.215 P1 0.08 0.08 0.05 0.05 0.03 0.03
M2 264 264 325 325 325 325
1172.073 P1 0.07 0.07 0.04 0.04 0.02 0.02
M2 256 256 315 315 315 315
1303.560 P1 0.06 0.06 0.04 0.04 0.02 0.02
M2 264 264 325 325 325 325
1468.800 P1 0.06 0.06 0.03 0.03 0.02 0.02
M2 256 256 315 315 315 315
1717.389 P1 0.05 0.03 0.02
M2 264 325 325
1935.086 P1 0.04 0.03 0.01
M2 256 315 315

Thermal limit rating not considered (see page 2-7)

Lenze 5-65
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 702 Nm

GKS 06 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1C 1D 1E 1F 1C 1D 1E 1F 1C 1D 1E 1F
i P1perm [kW]
M2perm [Nm]
6.485 P1 10.2 10.2 6.26 6.26 3.13 3.13
M2 214 214 263 263 263 263
9.196 P1 10.2 10.2 6.26 6.26 3.13 3.13
M2 303 303 373 373 373 373
10.147 P1 10.2 10.2 6.26 6.26 3.13 3.13
M2 334 334 412 412 412 412
11.382 P1 7.30 7.30 7.30 4.49 4.49 4.49 2.25 2.25 2.25
M2 269 269 269 331 331 331 331 331 331
12.612 P1 8.47 8.47 5.21 5.21 2.61 2.61
M2 346 346 426 426 426 426
14.824 P1 10.2 10.2 6.25 6.25 3.13 3.13
M2 488 488 600 600 600 600
16.699 P1 9.07 9.07 5.58 5.58 2.79 2.79
M2 491 491 604 604 604 604
17.809 P1 7.30 7.30 7.30 4.49 4.49 4.49 2.25 2.25 2.25
M2 421 421 421 518 518 518 518 518 518
20.329 P1 8.20 8.20 5.05 5.05 2.53 2.53
M2 540 540 665 665 665 665
22.902 P1 6.63 6.63 4.08 4.08 2.04 2.04
M2 492 492 606 606 606 606
5 26.017 P1
M2
6.54
551
6.54
551
6.54
551
4.03
679
4.03
679
4.03
679
2.01
679
2.01
679
2.01
679
28.461 P1 6.01 6.01 6.01 3.70 3.70 3.70 1.85 1.85 1.85
M2 554 554 554 682 682 682 682 682 682
32.063 P1 4.77 4.77 4.77 2.94 2.94 2.94 1.47 1.47 1.47
M2 495 495 495 610 610 610 610 610 610
36.303 P1 4.01 4.73 4.73 4.73 2.47 2.91 2.91 2.91 1.23 1.46 1.46 1.46
M2 471 556 556 556 580 685 685 685 580 685 685 685
41.472 P1 4.17 4.17 2.56 2.56 1.28 1.28
M2 560 560 689 689 689 689
44.471 P1 3.88 3.88 3.88 2.39 2.39 2.39 1.20 1.20 1.20
M2 560 560 560 689 689 689 689 689 689
53.074 P1 3.28 3.28 3.28 2.02 2.02 2.02 1.01 1.01 1.01
M2 564 564 564 695 695 695 695 695 695
57.882 P1 2.77 3.01 3.01 1.71 1.85 1.85 0.85 0.93 0.93
M2 519 564 564 639 695 695 639 695 695
65.207 P1 2.40 2.40 2.40 1.48 1.48 1.48 0.74 0.74 0.74
M2 507 507 507 624 624 624 624 624 624
72.000 P1 2.32 2.44 2.44 1.43 1.51 1.51 0.71 0.75 0.75
M2 540 570 570 665 702 702 665 702 702
81.111 P1 1.95 1.95 1.95 1.20 1.20 1.20 0.60 0.60 0.60
M2 512 512 512 630 630 630 630 630 630
93.177 P1 1.79 1.89 1.10 1.16 0.55 0.58
M2 540 570 664 702 664 702
104.967 P1 1.52 1.52 0.93 0.93 0.47 0.47
M2 516 516 635 635 635 635
113.082 P1 1.55 1.56 0.96 0.96 0.48 0.48
M2 568 570 700 702 700 702
127.392 P1 1.25 1.25 0.77 0.77 0.39 0.39
M2 516 516 635 635 635 635
142.941 P1 1.23 0.76 0.38
M2 570 702 702

Thermal limit rating not considered (see page 2-7)

5-66 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 702 Nm

GKS 06 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1C 1D 1E 1F 1C 1D 1E 1F 1C 1D 1E 1F
i P1perm [kW]
M2perm [Nm]
161.029 P1 0.99 0.61 0.30
M2 516 635 635
190.080 P1 0.93 0.93 0.57 0.57 0.29 0.29
M2 570 570 702 702 702 702
214.133 P1 0.74 0.74 0.46 0.46 0.23 0.23
M2 516 516 635 635 635 635
230.688 P1 0.76 0.76 0.47 0.47 0.24 0.24
M2 570 570 702 702 702 702
259.880 P1 0.61 0.61 0.38 0.38 0.19 0.19
M2 516 516 635 635 635 635
291.600 P1 0.60 0.37 0.19
M2 570 702 702
328.500 P1 0.49 0.30 0.15
M2 516 635 635

Thermal limit rating not considered (see page 2-7)

Lenze 5-67
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 702 Nm

GKS 06 - 4 W Dimensions page 5-111

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1A 1B 1C 1A 1B 1C 1A 1B 1C
i P1perm [kW]
M2perm [Nm]
103.721 P1 0.96 1.68 1.68 0.59 1.04 1.04 0.30 0.52 0.52
M2 317 556 556 390 685 685 390 685 685
113.205 P1 0.96 1.21 1.21 0.59 0.75 0.75 0.30 0.37 0.37
M2 346 436 436 425 537 537 425 537 537
127.059 P1 0.96 1.38 1.38 0.59 0.85 0.85 0.30 0.43 0.43
M2 388 560 560 478 689 689 478 689 689
140.816 P1 0.96 0.97 0.97 0.59 0.60 0.60 0.30 0.30 0.30
M2 430 436 436 529 537 537 529 537 537
155.647 P1 1.13 1.13 0.70 0.70 0.35 0.35
M2 560 560 689 689 689 689
174.336 P1 0.79 0.79 0.79 0.48 0.48 0.48 0.24 0.24 0.24
M2 436 436 436 537 537 537 537 537 537
202.588 P1 0.88 0.88 0.54 0.54 0.27 0.27
M2 564 564 695 695 695 695
224.524 P1 0.61 0.61 0.61 0.38 0.38 0.38 0.19 0.19 0.19
M2 436 436 436 537 537 537 537 537 537
252.000 P1 0.71 0.71 0.44 0.44 0.22 0.22
M2 570 570 702 702 702 702
279.286 P1 0.49 0.49 0.49 0.30 0.30 0.30 0.15 0.15 0.15
M2 436 436 436 537 537 537 537 537 537
5 316.800 P1
M2
0.57
570
0.57
570
0.57
570
0.35
702
0.35
702
0.35
702
0.17
702
0.17
702
0.17
702
361.429 P1 0.38 0.38 0.38 0.23 0.23 0.23 0.12 0.12 0.12
M2 436 436 436 537 537 537 537 537 537
408.000 P1 0.44 0.44 0.44 0.27 0.27 0.27 0.14 0.14 0.14
M2 570 570 570 702 702 702 702 702 702
458.067 P1 0.30 0.30 0.18 0.18 0.09 0.09
M2 436 436 537 537 537 537
517.091 P1 0.35 0.35 0.21 0.21 0.11 0.11
M2 570 570 702 702 702 702
555.927 P1 0.25 0.25 0.15 0.15 0.08 0.08
M2 436 436 537 537 537 537
640.800 P1 0.28 0.28 0.28 0.17 0.17 0.17 0.09 0.09 0.09
M2 570 570 570 702 702 702 702 702 702
696.668 P1 0.20 0.20 0.12 0.12 0.06 0.06
M2 436 436 537 537 537 537
812.137 P1 0.22 0.22 0.14 0.14 0.07 0.07
M2 570 570 702 702 702 702
914.907 P1 0.18 0.18 0.11 0.11 0.05 0.05
M2 516 516 635 635 635 635
1017.741 P1 0.18 0.18 0.11 0.11 0.05 0.05
M2 570 570 702 702 702 702
1146.529 P1 0.14 0.14 0.09 0.09 0.04 0.04
M2 516 516 635 635 635 635
1340.834 P1 0.13 0.08 0.04
M2 570 702 702
1510.507 P1 0.11 0.07 0.03
M2 516 635 635

Thermal limit rating not considered (see page 2-7)

5-68 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 1330 Nm

GKS 07 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1D 1E 1F 1G 1D 1E 1F 1G 1D 1E 1F 1G
i P1perm [kW]
M2perm [Nm]
5.955 P1 19.8 19.8 12.2 12.2 6.10 6.10
M2 382 382 470 470 470 470
8.254 P1 16.4 16.4 10.1 10.1 5.05 5.05
M2 439 439 540 540 540 540
9.171 P1 19.8 19.8 12.2 12.2 6.10 6.10
M2 588 588 725 725 725 725
10.124 P1 19.8 19.8 12.2 12.2 6.10 6.10
M2 650 650 800 800 800 800
11.378 P1 13.5 13.5 13.5 8.32 8.32 8.32 4.16 4.16 4.16
M2 498 498 498 613 613 613 613 613 613
12.711 P1 16.4 16.4 10.1 10.1 5.05 5.05
M2 676 676 832 832 832 832
14.799 P1 17.6 17.6 10.9 10.9 5.42 5.42
M2 845 845 1040 1040 1040 1040
16.674 P1 16.1 16.1 9.91 9.91 4.96 4.96
M2 870 870 1071 1071 1071 1071
17.270 P1 14.5 14.5 14.5 8.92 8.92 8.92 4.46 4.46 4.46
M2 811 811 811 998 998 998 998 998 998
20.511 P1 13.6 13.6 8.35 8.35 4.18 4.18
M2 902 902 1110 1110 1110 1110
23.111 P1
M2
12.7
949
12.7
949
7.80
1168
7.80
1168
3.90
1168
3.90
1168
5
25.244 P1 11.7 11.7 11.7 7.20 7.20 7.20 3.60 3.60 3.60
M2 956 956 956 1177 1177 1177 1177 1177 1177
28.274 P1 10.7 10.7 10.7 6.56 6.56 6.56 3.28 3.28 3.28
M2 976 976 976 1202 1202 1202 1202 1202 1202
31.858 P1 9.22 9.22 9.22 5.68 5.68 5.68 2.84 2.84 2.84
M2 952 952 952 1172 1172 1172 1172 1172 1172
36.064 P1 7.37 8.97 8.97 8.97 4.54 5.52 5.52 5.52 2.27 2.76 2.76 2.76
M2 861 1048 1048 1048 1061 1290 1290 1290 1061 1290 1290 1290
40.906 P1 7.91 7.91 4.87 4.87 2.43 2.43
M2 1048 1048 1290 1290 1290 1290
44.178 P1 7.38 7.38 7.38 4.54 4.54 4.54 2.27 2.27 2.27
M2 1056 1056 1056 1300 1300 1300 1300 1300 1300
50.346 P1 6.47 6.47 6.47 3.99 3.99 3.99 1.99 1.99 1.99
M2 1056 1056 1056 1300 1300 1300 1300 1300 1300
57.501 P1 5.17 5.71 5.71 3.18 3.52 3.52 1.59 1.76 1.76
M2 963 1064 1064 1186 1310 1310 1186 1310 1310
64.790 P1 4.62 4.62 4.62 2.85 2.85 2.85 1.42 1.42 1.42
M2 971 971 971 1195 1195 1195 1195 1195 1195
70.474 P1 4.46 4.70 4.70 2.74 2.89 2.89 1.37 1.45 1.45
M2 1017 1072 1072 1252 1320 1320 1252 1320 1320
79.407 P1 3.80 3.80 3.80 2.34 2.34 2.34 1.17 1.17 1.17
M2 979 979 979 1205 1205 1205 1205 1205 1205
92.563 P1 3.51 3.60 2.16 2.22 1.08 1.11
M2 1052 1080 1295 1330 1295 1330
104.296 P1 2.92 2.92 1.80 1.80 0.90 0.90
M2 987 987 1215 1215 1215 1215
112.338 P1 2.94 2.97 1.81 1.83 0.90 0.91
M2 1068 1080 1315 1330 1315 1330
126.578 P1 2.41 2.41 1.48 1.48 0.74 0.74
M2 987 987 1215 1215 1215 1215

Thermal limit rating not considered (see page 2-7)

Lenze 5-69
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 1330 Nm

GKS 07 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1D 1E 1F 1G 1D 1E 1F 1G 1D 1E 1F 1G
i P1perm [kW]
M2perm [Nm]
140.548 P1 2.37 2.37 2.37 1.46 1.46 1.46 0.73 0.73 0.73
M2 1080 1080 1080 1330 1330 1330 1330 1330 1330
158.364 P1 1.92 1.92 1.92 1.18 1.18 1.18 0.59 0.59 0.59
M2 987 987 987 1215 1215 1215 1215 1215 1215
184.600 P1 1.81 1.81 1.11 1.11 0.56 0.56
M2 1080 1080 1330 1330 1330 1330
208.000 P1 1.46 1.46 0.90 0.90 0.45 0.45
M2 987 987 1215 1215 1215 1215
224.037 P1 1.49 1.49 0.92 0.92 0.46 0.46
M2 1080 1080 1330 1330 1330 1330
252.436 P1 1.21 1.21 0.74 0.74 0.37 0.37
M2 987 987 1215 1215 1215 1215
283.193 P1 1.18 0.73 0.36
M2 1080 1330 1330
319.091 P1 0.96 0.59 0.29
M2 987 1215 1215

Thermal limit rating not considered (see page 2-7)

5-70 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 1330 Nm

GKS 07 - 4 W Dimensions page 5-111

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1B 1C 1D 1B 1C 1D 1B 1C 1D
i P1perm [kW]
M2perm [Nm]
103.039 P1 2.31 3.19 3.19 1.42 1.97 1.97 0.71 0.98 0.98
M2 758 1048 1048 933 1290 1290 933 1290 1290
112.391 P1 2.31 2.39 2.39 1.42 1.47 1.47 0.71 0.74 0.74
M2 827 855 855 1018 1053 1053 1018 1053 1053
126.222 P1 2.31 2.63 2.63 1.42 1.62 1.62 0.71 0.81 0.81
M2 928 1056 1056 1143 1300 1300 1143 1300 1300
137.748 P1 1.95 1.95 1.95 1.20 1.20 1.20 0.60 0.60 0.60
M2 855 855 855 1053 1053 1053 1053 1053 1053
154.622 P1 2.14 2.14 1.32 1.32 0.66 0.66
M2 1056 1056 1300 1300 1300 1300
179.201 P1 1.50 1.50 1.50 0.92 0.92 0.92 0.46 0.46 0.46
M2 855 855 855 1053 1053 1053 1053 1053 1053
201.254 P1 1.66 1.66 1.02 1.02 0.51 0.51
M2 1064 1064 1310 1310 1310 1310
222.909 P1 1.21 1.21 1.21 0.74 0.74 0.74 0.37 0.37 0.37
M2 855 855 855 1053 1053 1053 1053 1053 1053
246.659 P1 1.37 1.37 0.84 0.84 0.42 0.42
M2 1072 1072 1320 1320 1320 1320
273.199 P1 0.98 0.98 0.98 0.61 0.61 0.61 0.30 0.30 0.30
M2 855 855 855 1053 1053 1053 1053 1053 1053
321.049 P1
M2
1.05
1072
1.05
1072
1.05
1072
0.65
1320
0.65
1320
0.65
1320
0.32
1320
0.32
1320
0.32
1320
5
358.829 P1 0.75 0.75 0.75 0.46 0.46 0.46 0.23 0.23 0.23
M2 855 855 855 1053 1053 1053 1053 1053 1053
399.353 P1 0.84 0.84 0.84 0.52 0.52 0.52 0.26 0.26 0.26
M2 1072 1072 1072 1320 1320 1320 1320 1320 1320
464.367 P1 0.58 0.58 0.36 0.36 0.18 0.18
M2 855 855 1053 1053 1053 1053
516.810 P1 0.65 0.65 0.40 0.40 0.20 0.20
M2 1072 1072 1320 1320 1320 1320
563.573 P1 0.48 0.48 0.29 0.29 0.15 0.15
M2 855 855 1053 1053 1053 1053
636.581 P1 0.53 0.53 0.53 0.33 0.33 0.33 0.16 0.16 0.16
M2 1080 1080 1080 1330 1330 1330 1330 1330 1330
683.972 P1 0.39 0.39 0.24 0.24 0.12 0.12
M2 855 855 1053 1053 1053 1053
823.810 P1 0.41 0.41 0.25 0.25 0.13 0.13
M2 1080 1080 1330 1330 1330 1330
928.237 P1 0.33 0.33 0.21 0.21 0.10 0.10
M2 987 987 1215 1215 1215 1215
999.806 P1 0.34 0.34 0.21 0.21 0.10 0.10
M2 1080 1080 1330 1330 1330 1330
1126.542 P1 0.28 0.28 0.17 0.17 0.09 0.09
M2 987 987 1215 1215 1215 1215
1277.842 P1 0.27 0.16 0.08
M2 1080 1330 1330
1439.822 P1 0.22 0.13 0.07
M2 987 1215 1215

Thermal limit rating not considered (see page 2-7)

Lenze 5-71
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 3080 Nm

GKS 09 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1E 1F 1G 1H 1E 1F 1G 1H 1E 1F 1G 1H
i P1perm [kW]
M2perm [Nm]
12.283 P1 33.0 33.0 20.3 20.3 10.2 10.2
M2 1312 1312 1615 1615 1615 1615
13.360 P1 33.0 33.0 20.3 20.3 10.2 10.2
M2 1427 1427 1757 1757 1757 1757
16.122 P1 28.0 28.0 28.0 17.2 17.2 17.2 8.62 8.62 8.62
M2 1462 1462 1462 1801 1801 1801 1801 1801 1801
17.536 P1 28.0 28.0 28.0 17.2 17.2 17.2 8.62 8.62 8.62
M2 1591 1591 1591 1958 1958 1958 1958 1958 1958
19.541 P1 33.0 33.0 20.3 20.3 10.2 10.2
M2 2087 2087 2570 2570 2570 2570
22.022 P1 30.4 30.4 18.7 18.7 9.36 9.36
M2 2170 2170 2672 2672 2672 2672
25.649 P1 28.0 28.0 28.0 17.2 17.2 17.2 8.61 8.61 8.61
M2 2325 2325 2325 2862 2862 2862 2862 2862 2862
29.228 P1 25.0 25.0 25.0 15.4 15.4 15.4 7.69 7.69 7.69
M2 2367 2367 2367 2914 2914 2914 2914 2914 2914
32.940 P1 22.7 22.7 22.7 14.0 14.0 14.0 6.99 6.99 6.99
M2 2424 2424 2424 2984 2984 2984 2984 2984 2984
35.193 P1 14.9 21.6 21.6 21.6 9.16 13.3 13.3 13.3 4.58 6.64 6.64 6.64
M2 1697 2460 2460 2460 2089 3029 3029 3029 2089 3029 3029 3029
5 39.662 P1
M2
14.9
1912
19.0
2438
19.0
2438
19.0
2438
9.16
2355
11.7
3002
11.7
3002
11.7
3002
4.58
2355
5.84
3002
5.84
3002
5.84
3002
43.146 P1 17.6 17.6 17.6 10.8 10.8 10.8 5.41 5.41 5.41
M2 2456 2456 2456 3024 3024 3024 3024 3024 3024
48.625 P1 15.6 15.6 15.6 9.58 9.58 9.58 4.79 4.79 4.79
M2 2450 2450 2450 3017 3017 3017 3017 3017 3017
58.456 P1 10.1 13.0 13.0 6.22 8.00 8.00 3.11 4.00 4.00
M2 1913 2462 2462 2355 3031 3031 2355 3031 3031
65.879 P1 10.1 11.6 11.6 6.22 7.14 7.14 3.11 3.57 3.57
M2 2155 2475 2475 2654 3048 3048 2654 3048 3048
70.982 P1 8.64 10.7 10.7 5.32 6.59 6.59 2.66 3.30 3.30
M2 1986 2462 2462 2445 3031 3031 2445 3031 3031
79.996 P1 8.64 9.62 9.62 5.32 5.93 5.93 2.66 2.96 2.96
M2 2238 2494 2494 2756 3071 3071 2756 3071 3071
91.860 P1 6.94 8.27 4.27 5.09 2.14 2.55
M2 2064 2462 2542 3031 2542 3031
103.524 P1 6.94 7.46 4.27 4.59 2.14 2.30
M2 2326 2501 2864 3080 2864 3080
111.484 P1 5.83 6.82 3.59 4.20 1.79 2.10
M2 2105 2462 2591 3031 2591 3031
125.641 P1 5.83 6.15 3.59 3.78 1.79 1.89
M2 2372 2501 2920 3080 2920 3080
140.921 P1 4.70 2.89 1.45
M2 2146 2642 2642
158.816 P1 4.70 2.89 1.45
M2 2418 2978 2978
182.000 P1 4.18 4.18 2.57 2.57 1.29 1.29
M2 2462 2462 3031 3031 3031 3031
205.111 P1 3.76 3.76 2.32 2.32 1.16 1.16
M2 2501 2501 3080 3080 3080 3080
220.882 P1 3.44 3.44 2.12 2.12 1.06 1.06
M2 2462 2462 3031 3031 3031 3031

Thermal limit rating not considered (see page 2-7)

5-72 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 3080 Nm

GKS 09 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1E 1F 1G 1H 1E 1F 1G 1H 1E 1F 1G 1H
i P1perm [kW]
M2perm [Nm]
248.930 P1 3.10 3.10 1.91 1.91 0.96 0.96
M2 2501 2501 3080 3080 3080 3080
279.205 P1 2.72 1.68 0.84
M2 2462 3031 3031
314.659 P1 2.45 1.51 0.76
M2 2501 3080 3080

Thermal limit rating not considered (see page 2-7)

Lenze 5-73
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 3080 Nm

GKS 09 - 4 W Dimensions page 5-111

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1C 1D 1E 1F 1C 1D 1E 1F 1C 1D 1E 1F
i P1perm [kW]
M2perm [Nm]
100.551 P1 4.01 6.18 7.68 7.68 2.47 3.80 4.73 4.73 1.23 1.90 2.37 2.37
M2 1284 1979 2460 2460 1580 2436 3029 3029 1580 2436 3029 3029
113.320 P1 4.01 6.18 6.76 6.76 2.47 3.80 4.16 4.16 1.23 1.90 2.08 2.08
M2 1447 2230 2438 2438 1781 2746 3002 3002 1781 2746 3002 3002
123.275 P1 4.01 6.18 6.26 6.26 2.47 3.80 3.85 3.85 1.23 1.90 1.93 1.93
M2 1574 2426 2456 2456 1938 2987 3024 3024 1938 2987 3024 3024
138.929 P1 4.01 5.54 5.54 5.54 2.47 3.41 3.41 3.41 1.23 1.71 1.71 1.71
M2 1774 2450 2450 2450 2184 3017 3017 3017 2184 3017 3017 3017
151.012 P1 5.11 5.11 5.11 3.14 3.14 3.14 1.57 1.57 1.57
M2 2456 2456 2456 3024 3024 3024 3024 3024 3024
170.188 P1 4.52 4.52 4.52 2.78 2.78 2.78 1.39 1.39 1.39
M2 2450 2450 2450 3017 3017 3017 3017 3017 3017
204.596 P1 3.78 3.78 3.78 2.33 2.33 2.33 1.16 1.16 1.16
M2 2462 2462 2462 3031 3031 3031 3031 3031 3031
230.577 P1 3.37 3.37 3.37 2.08 2.08 2.08 1.04 1.04 1.04
M2 2475 2475 2475 3048 3048 3048 3048 3048 3048
248.439 P1 3.11 3.11 3.11 1.92 1.92 1.92 0.96 0.96 0.96
M2 2462 2462 2462 3031 3031 3031 3031 3031 3031
279.986 P1 2.80 2.80 2.80 1.72 1.72 1.72 0.86 0.86 0.86
M2 2494 2494 2494 3071 3071 3071 3071 3071 3071
5 323.365 P1
M2
2.39
2462
2.39
2462
2.39
2462
1.47
3031
1.47
3031
1.47
3031
0.74
3031
0.74
3031
0.74
3031
364.427 P1 2.15 2.15 2.15 1.32 1.32 1.32 0.66 0.66 0.66
M2 2494 2494 2494 3071 3071 3071 3071 3071 3071
402.234 P1 1.92 1.92 1.92 1.18 1.18 1.18 0.59 0.59 0.59
M2 2462 2462 2462 3031 3031 3031 3031 3031 3031
453.311 P1 1.73 1.73 1.73 1.06 1.06 1.06 0.53 0.53 0.53
M2 2494 2494 2494 3071 3071 3071 3071 3071 3071
520.538 P1 1.49 1.49 1.49 0.91 0.91 0.91 0.46 0.46 0.46
M2 2462 2462 2462 3031 3031 3031 3031 3031 3031
586.638 P1 1.34 1.34 1.34 0.82 0.82 0.82 0.41 0.41 0.41
M2 2501 2501 2501 3080 3080 3080 3080 3080 3080
631.744 P1 1.22 1.22 1.22 0.75 0.75 0.75 0.38 0.38 0.38
M2 2462 2462 2462 3031 3031 3031 3031 3031 3031
711.965 P1 1.10 1.10 1.10 0.68 0.68 0.68 0.34 0.34 0.34
M2 2501 2501 2501 3080 3080 3080 3080 3080 3080
817.551 P1 0.95 0.95 0.58 0.58 0.29 0.29
M2 2462 2462 3031 3031 3031 3031
921.367 P1 0.85 0.85 0.53 0.53 0.26 0.26
M2 2501 2501 3080 3080 3080 3080
992.209 P1 0.78 0.78 0.48 0.48 0.24 0.24
M2 2462 2462 3031 3031 3031 3031
1118.204 P1 0.70 0.70 0.43 0.43 0.22 0.22
M2 2501 2501 3080 3080 3080 3080
1254.197 P1 0.62 0.38 0.19
M2 2462 3031 3031
1413.461 P1 0.56 0.34 0.17
M2 2501 3080 3080

Thermal limit rating not considered (see page 2-7)

5-74 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 6072 Nm

GKS 11 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1F 1G 1H 1K 1F 1G 1H 1K 1F 1G 1H 1K
i P1perm [kW]
M2perm [Nm]
12.094 P1 57.4 57.4 35.4 35.4 17.7 17.7
M2 2250 2250 2770 2770 2770 2770
13.154 P1 57.4 57.4 35.4 35.4 17.7 17.7
M2 2447 2447 3013 3013 3013 3013
15.874 P1 48.8 48.8 30.0 30.0 15.0 15.0
M2 2509 2509 3089 3089 3089 3089
17.265 P1 48.8 48.8 30.0 30.0 15.0 15.0
M2 2729 2729 3360 3360 3360 3360
19.515 P1 57.4 57.4 35.4 35.4 17.7 17.7
M2 3630 3630 4470 4470 4470 4470
21.989 P1 55.7 55.7 34.3 34.3 17.1 17.1
M2 3967 3967 4884 4884 4884 4884
25.615 P1 48.8 48.8 30.0 30.0 15.0 15.0
M2 4049 4049 4985 4985 4985 4985
28.021 P1 46.2 46.2 46.2 28.4 28.4 28.4 14.2 14.2 14.2
M2 4193 4193 4193 5163 5163 5163 5163 5163 5163
31.573 P1 43.8 43.8 43.8 27.0 27.0 27.0 13.5 13.5 13.5
M2 4484 4484 4484 5521 5521 5521 5521 5521 5521
35.741 P1 27.3 39.7 39.7 39.7 16.8 24.4 24.4 24.4 8.40 12.2 12.2 12.2
M2 3160 4593 4593 4593 3890 5655 5655 5655 3890 5655 5655 5655
40.272 P1
M2
27.3
3560
36.5
4767
36.5
4767
36.5
4767
16.8
4383
22.5
5869
22.5
5869
22.5
5869
8.40
4383
11.3
5869
11.3
5869
11.3
5869
5
43.783 P1 33.2 33.2 33.2 20.4 20.4 20.4 10.2 10.2 10.2
M2 4711 4711 4711 5800 5800 5800 5800 5800 5800
49.333 P1 30.1 30.1 30.1 18.5 18.5 18.5 9.27 9.27 9.27
M2 4810 4810 4810 5923 5923 5923 5923 5923 5923
57.683 P1 19.0 26.0 26.0 11.7 16.0 16.0 5.85 7.99 7.99
M2 3548 4850 4850 4369 5972 5972 4369 5972 5972
64.995 P1 19.0 23.1 23.1 11.7 14.2 14.2 5.85 7.11 7.11
M2 3998 4866 4866 4923 5992 5992 4923 5992 5992
70.887 P1 15.9 21.1 21.1 9.77 13.0 13.0 4.89 6.50 6.50
M2 3645 4851 4851 4488 5973 5973 4488 5973 5973
79.873 P1 15.9 18.9 18.9 9.77 11.7 11.7 4.89 5.83 5.83
M2 4107 4899 4899 5057 6032 6032 5057 6032 6032
91.737 P1 12.8 16.3 7.85 10.1 3.93 5.03
M2 3790 4853 4666 5975 4666 5975
103.365 P1 12.8 14.7 7.85 9.07 3.93 4.53
M2 4270 4931 5258 6072 5258 6072
111.335 P1 10.7 13.5 6.55 8.28 3.28 4.14
M2 3840 4853 4728 5975 4728 5975
125.448 P1 10.7 12.1 6.55 7.47 3.28 3.74
M2 4327 4931 5328 6072 5328 6072
140.732 P1 8.54 5.26 2.63
M2 3893 4794 4794
158.571 P1 8.54 5.26 2.63
M2 4387 5401 5401
186.572 P1 8.03 8.03 4.94 4.94 2.47 2.47
M2 4853 4853 5975 5975 5975 5975
210.222 P1 7.03 7.03 4.33 4.33 2.16 2.16
M2 4785 4785 5892 5892 5892 5892
226.431 P1 6.62 6.62 4.07 4.07 2.04 2.04
M2 4853 4853 5975 5975 5975 5975

Thermal limit rating not considered (see page 2-7)

Lenze 5-75
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 6072 Nm

GKS 11 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1F 1G 1H 1K 1F 1G 1H 1K 1F 1G 1H 1K
i P1perm [kW]
M2perm [Nm]
255.133 P1 5.79 5.79 3.56 3.56 1.78 1.78
M2 4785 4785 5892 5892 5892 5892
286.219 P1 5.23 3.22 1.61
M2 4853 5975 5975
322.500 P1 4.58 2.82 1.41
M2 4785 5892 5892

Thermal limit rating not considered (see page 2-7)

5-76 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 6072 Nm

GKS 11 - 4 W Dimensions page 5-111

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1D 1E 1F 1G 1D 1E 1F 1G 1D 1E 1F 1G
i P1perm [kW]
M2perm [Nm]
102.119 P1 7.37 12.0 14.1 14.1 4.54 7.38 8.69 8.69 2.27 3.69 4.35 4.35
M2 2398 3897 4593 4593 2952 4798 5655 5655 2952 4798 5655 5655
115.063 P1 7.37 12.0 13.0 13.0 4.54 7.38 8.01 8.01 2.27 3.69 4.00 4.00
M2 2701 4391 4767 4767 3326 5406 5869 5869 3326 5406 5869 5869
125.095 P1 7.37 11.8 11.8 11.8 4.54 7.28 7.28 7.28 2.27 3.64 3.64 3.64
M2 2937 4711 4711 4711 3616 5800 5800 5800 3616 5800 5800 5800
140.952 P1 7.37 10.7 10.7 10.7 4.54 6.60 6.60 6.60 2.27 3.30 3.30 3.30
M2 3309 4810 4810 4810 4075 5923 5923 5923 4075 5923 5923 5923
153.242 P1 9.65 9.65 9.65 5.94 5.94 5.94 2.97 2.97 2.97
M2 4711 4711 4711 5800 5800 5800 5800 5800 5800
172.667 P1 8.75 8.75 8.75 5.39 5.39 5.39 2.69 2.69 2.69
M2 4810 4810 4810 5923 5923 5923 5923 5923 5923
201.890 P1 7.54 7.54 7.54 4.64 4.64 4.64 2.32 2.32 2.32
M2 4850 4850 4850 5972 5972 5972 5972 5972 5972
227.481 P1 6.72 6.72 6.72 4.14 4.14 4.14 2.07 2.07 2.07
M2 4866 4866 4866 5992 5992 5992 5992 5992 5992
248.106 P1 6.14 6.14 6.14 3.78 3.78 3.78 1.89 1.89 1.89
M2 4851 4851 4851 5973 5973 5973 5973 5973 5973
279.556 P1 5.50 5.50 5.50 3.39 3.39 3.39 1.69 1.69 1.69
M2 4899 4899 4899 6032 6032 6032 6032 6032 6032
322.931 P1
M2
4.72
4851
4.72
4851
4.72
4851
2.90
5973
2.90
5973
2.90
5973
1.45
5973
1.45
5973
1.45
5973
5
363.866 P1 4.23 4.23 4.23 2.60 2.60 2.60 1.30 1.30 1.30
M2 4899 4899 4899 6032 6032 6032 6032 6032 6032
395.787 P1 3.85 3.85 3.85 2.37 2.37 2.37 1.19 1.19 1.19
M2 4851 4851 4851 5973 5973 5973 5973 5973 5973
445.958 P1 3.45 3.45 3.45 2.12 2.12 2.12 1.06 1.06 1.06
M2 4899 4899 4899 6032 6032 6032 6032 6032 6032
512.195 P1 2.98 2.98 2.98 1.83 1.83 1.83 0.92 0.92 0.92
M2 4853 4853 4853 5975 5975 5975 5975 5975 5975
577.122 P1 2.68 2.68 2.68 1.65 1.65 1.65 0.83 0.83 0.83
M2 4931 4931 4931 6072 6072 6072 6072 6072 6072
621.619 P1 2.45 2.45 2.45 1.51 1.51 1.51 0.76 0.76 0.76
M2 4853 4853 4853 5975 5975 5975 5975 5975 5975
700.416 P1 2.21 2.21 2.21 1.36 1.36 1.36 0.68 0.68 0.68
M2 4931 4931 4931 6072 6072 6072 6072 6072 6072
816.455 P1 1.87 1.87 1.15 1.15 0.57 0.57
M2 4853 4853 5975 5975 5975 5975
919.949 P1 1.68 1.68 1.04 1.04 0.52 0.52
M2 4931 4931 6072 6072 6072 6072
990.879 P1 1.54 1.54 0.95 0.95 0.47 0.47
M2 4853 4853 5975 5975 5975 5975
1116.484 P1 1.39 1.39 0.85 0.85 0.43 0.43
M2 4931 4931 6072 6072 6072 6072
1252.516 P1 1.22 0.75 0.37
M2 4853 5975 5975
1411.286 P1 1.10 0.68 0.34
M2 4931 6072 6072

Thermal limit rating not considered (see page 2-7)

Lenze 5-77
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 11790 Nm

GKS 14 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1G 1H 1K 1G 1H 1K 1G 1H 1K
i P1perm [kW]
M2perm [Nm]
12.435 P1 100.7 62.0 31.0
M2 4056 4994 4994
13.525 P1 100.7 62.0 31.0
M2 4412 5432 5432
16.646 P1 89.0 89.0 54.8 54.8 27.4 27.4
M2 4797 4797 5906 5906 5906 5906
18.311 P1 83.9 83.9 51.7 51.7 25.8 25.8
M2 4978 4978 6130 6130 6130 6130
20.065 P1 100.7 62.0 31.0
M2 6545 8059 8059
22.609 P1 100.6 61.9 31.0
M2 7369 9073 9073
24.696 P1 89.0 89.0 54.8 54.8 27.4 27.4
M2 7117 7117 8763 8763 8763 8763
27.165 P1 83.9 83.9 51.7 51.7 25.8 25.8
M2 7386 7386 9094 9094 9094 9094
30.609 P1 83.0 83.0 51.1 51.1 25.5 25.5
M2 8229 8229 10132 10132 10132 10132
34.692 P1 72.1 72.1 44.4 44.4 22.2 22.2
M2 8099 8099 9973 9973 9973 9973
5 39.089 P1
M2
70.2
8883
70.2
8883
43.2
10937
43.2
10937
21.6
10937
21.6
10937
42.531 P1 63.3 63.3 39.0 39.0 19.5 19.5
M2 8720 8720 10737 10737 10737 10737
47.923 P1 58.9 58.9 36.3 36.3 18.1 18.1
M2 9146 9146 11261 11261 11261 11261
56.251 P1 38.1 51.4 51.4 23.4 31.6 31.6 11.7 15.8 15.8
M2 6934 9358 9358 8538 11522 11522 8538 11522 11522
63.382 P1 38.1 45.4 45.4 23.4 28.0 28.0 11.7 14.0 14.0
M2 7813 9321 9321 9621 11477 11477 9621 11477 11477
68.942 P1 32.6 41.7 20.0 25.6 10.0 12.8
M2 7270 9303 8952 11454 8952 11454
77.681 P1 32.6 37.2 20.0 22.9 10.0 11.4
M2 8192 9356 10087 11520 10087 11520
90.551 P1 25.7 31.8 15.8 19.6 7.90 9.79
M2 7526 9330 9267 11488 9267 11488
102.029 P1 25.7 28.6 15.8 17.6 7.90 8.80
M2 8480 9453 10441 11639 10441 11639
109.896 P1 21.5 26.9 13.2 16.6 6.62 8.28
M2 7656 9575 9427 11790 9427 11790
123.826 P1 21.5 23.6 13.2 14.5 6.62 7.25
M2 8627 9453 10622 11639 10622 11639
138.913 P1 17.3 10.7 5.33
M2 7793 9595 9595
156.522 P1 17.3 10.7 5.33
M2 8781 10812 10812
186.572 P1 15.6 15.6 9.60 9.60 4.80 4.80
M2 9429 9429 11609 11609 11609 11609
210.222 P1 13.8 13.8 8.48 8.48 4.24 4.24
M2 9385 9385 11555 11555 11555 11555
226.431 P1 12.9 12.9 7.91 7.91 3.96 3.96
M2 9429 9429 11609 11609 11609 11609

Thermal limit rating not considered (see page 2-7)

5-78 Lenze
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 11790 Nm

GKS 14 - 3 W Dimensions page 5-110

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1G 1H 1K 1G 1H 1K 1G 1H 1K
i P1perm [kW]
M2perm [Nm]
255.133 P1 11.4 11.4 6.99 6.99 3.50 3.50
M2 9385 9385 11555 11555 11555 11555
286.219 P1 10.2 6.26 3.13
M2 9429 11609 11609
322.500 P1 8.98 5.53 2.77
M2 9385 11555 11555
Thermal limit rating not considered (see page 2-7)

Lenze 5-79
 Selection tables – (Helical)-bevel gearboxes
Gearboxes with free input shaft

M2 perm ≤ 11639 Nm

GKS 14 - 4 W Dimensions page 5-111

n1 2800 min-1 1400 min-1 700 min-1
Drive size 1E 1F 1G 1H 1E 1F 1G 1H 1E 1F 1G 1H
i P1perm [kW]
M2perm [Nm]
97.467 P1 14.9 22.5 26.1 26.1 9.16 13.9 16.1 16.1 4.58 6.93 8.03 8.03
M2 4619 6982 8099 8099 5688 8597 9973 9973 5688 8597 9973 9973
109.822 P1 14.9 22.5 25.4 25.4 9.16 13.9 15.6 15.6 4.58 6.93 7.82 7.82
M2 5205 7868 8883 8883 6409 9687 10937 10937 6409 9687 10937 10937
119.493 P1 14.9 22.5 22.9 22.9 9.16 13.9 14.1 14.1 4.58 6.93 7.05 7.05
M2 5663 8560 8720 8720 6973 10540 10737 10737 6973 10540 10737 10737
134.640 P1 14.9 21.3 21.3 21.3 9.16 13.1 13.1 13.1 4.58 6.57 6.57 6.57
M2 6381 9146 9146 9146 7857 11261 11261 11261 7857 11261 11261 11261
158.039 P1 14.9 18.6 18.6 18.6 9.16 11.5 11.5 11.5 4.58 5.72 5.72 5.72
M2 7490 9358 9358 9358 9223 11522 11522 11522 9223 11522 11522 11522
178.072 P1 14.9 16.4 16.4 16.4 9.16 10.1 10.1 10.1 4.58 5.06 5.06 5.06
M2 8440 9321 9321 9321 10392 11477 11477 11477 10392 11477 11477 11477
193.754 P1 15.2 15.2 15.2 9.34 9.34 9.34 4.67 4.67 4.67
M2 9358 9358 9358 11522 11522 11522 11522 11522 11522
218.315 P1 13.4 13.4 13.4 8.25 8.25 8.25 4.13 4.13 4.13
M2 9321 9321 9321 11477 11477 11477 11477 11477 11477
237.467 P1 12.3 12.3 12.3 7.57 7.57 7.57 3.79 3.79 3.79
M2 9303 9303 9303 11454 11454 11454 11454 11454 11454
267.568 P1 11.0 11.0 11.0 6.76 6.76 6.76 3.38 3.38 3.38
M2 9356 9356 9356 11520 11520 11520 11520 11520 11520
5 321.729 P1
M2
9.08
9303
9.08
9303
9.08
9303
5.59
11454
5.59
11454
5.59
11454
2.80
11454
2.80
11454
2.80
11454
362.512 P1 8.10 8.10 8.10 4.99 4.99 4.99 2.50 2.50 2.50
M2 9356 9356 9356 11520 11520 11520 11520 11520 11520
390.672 P1 7.48 7.48 7.48 4.60 4.60 4.60 2.30 2.30 2.30
M2 9303 9303 9303 11454 11454 11454 11454 11454 11454
440.193 P1 6.67 6.67 6.67 4.11 4.11 4.11 2.05 2.05 2.05
M2 9356 9356 9356 11520 11520 11520 11520 11520 11520
513.121 P1 5.71 5.71 5.71 3.52 3.52 3.52 1.76 1.76 1.76
M2 9330 9330 9330 11488 11488 11488 11488 11488 11488
578.164 P1 5.13 5.13 5.13 3.16 3.16 3.16 1.58 1.58 1.58
M2 9453 9453 9453 11639 11639 11639 11639 11639 11639
622.742 P1 4.71 4.71 4.71 2.90 2.90 2.90 1.45 1.45 1.45
M2 9330 9330 9330 11488 11488 11488 11488 11488 11488
701.681 P1 4.23 4.23 4.23 2.60 2.60 2.60 1.30 1.30 1.30
M2 9453 9453 9453 11639 11639 11639 11639 11639 11639
805.901 P1 3.64 3.64 2.24 2.24 1.12 1.12
M2 9330 9330 11488 11488 11488 11488
908.058 P1 3.27 3.27 2.01 2.01 1.01 1.01
M2 9453 9453 11639 11639 11639 11639
978.071 P1 3.00 3.00 1.84 1.84 0.92 0.92
M2 9330 9330 11488 11488 11488 11488
1102.052 P1 2.69 2.69 1.66 1.66 0.83 0.83
M2 9453 9453 11639 11639 11639 11639
1236.326 P1 2.37 1.46 0.73
M2 9330 11488 11488
1393.043 P1 2.13 1.31 0.66
M2 9453 11639 11639

Thermal limit rating not considered (see page 2-7)

5-80 Lenze
 5

Lenze 5-81
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKR ÇÇ - 2 M HÇR 063 071 080
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç
Motor g 1 129 142 156
g1 Without options 105 130 130
Brake motor 105 131 131
k1 193 204 176 225
k2 100 145 145
∆k ** Brake 56 66 68
Separate fan 71 80 94
Separate fan + brake 118 134 150
Gearbox Gearbox Total length
size l* p* p1 a h o k
04 120 151 63 36 63 189 363 404 376 435

Gearbox Hollow shaft Pitch circle

size d l d1 l1 u t1) a1 b1 e1 f1 i1 s1
H7 JS9 +0.1 J7
20 30 6 22.8
04 120 106 104 62 88 3 2.5 M8x16
25 35 8 27.0

Gearbox Foot Torque plate

size b5 b7 c5 e5 f5 n m s5 a7 a8 s6

04 70 90 8 105 95 25 28 9 88 65 25 x 17
Dimensions in [mm] * Observe k2 ** Further attachments in chapter 7
1)If the hollow shaft diameter is d=25 mm use a flat key to DIN 6885/3

5-82 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKR ÇÇ - 2 M HAK 063 071 080 5
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç
Motor g 1 129 142 156
g1 Without options 105 130 130
Brake motor 105 131 131
k1 193 204 176 225
k2 100 145 145
∆k ** Brake 56 66 68
Separate fan 71 80 94
Separate fan + brake 118 134 150
Gearbox Gearbox Total length
size o1* p* p1 a h k8 o q k
04 140 151 63 36 63 28 189 80 363 404 376 435

Gearbox Hollow shaft Output flange

size d l d1 l1 u t1) a2 b2 c2 e2 f2 i2 s2
H7 JS9 +0,1 j7 4x90°
20 30 6 22,8 120 80 100 3 7
04 120 106 8,0 20
25 35 8 27 160 110 130 3,5 9
Dimensions in [mm] * Observe k2 ** Further attachments in chapter 7
1)If the hollow shaft diameter is d=25 mm use a flat key to DIN 6885/3

Lenze 5-83
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

5 GKR ÇÇ - 2 M VÇR 063 071 080
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç
Motor g 1 129 142 156
g1 Without options 105 130 130
Brake motor 105 131 131
k1 193 204 176 225
k2 100 145 145
∆k ** Brake 56 66 68
Separate fan 71 80 94
Separate fan + brake 118 134 150
Gearbox Gearbox Total length
size o1* p* p1 a h o q k
04 158 151 63 36 63 189 100 363 404 376 435

Gearbox Hollow shaft Pitch circle

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1
k6 J7
04 20 40 30 5 28 M6 6 22.5 104 62 88 3 42.5 M8x16

Gearbox Foot Torque plate

size b5 b7 c5 e5 f5 n m s5 a7 a8 s6

04 70 90 8 105 95 25 28 9 88 65 25 x 17
Dimensions in [mm]
* Observe k2
** Further attachments in chapter 7

5-84 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKR ÇÇ - 2 M VAK 063 071 080 5
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç
Motor g 1 129 142 156
g1 Without options 105 130 130
Brake motor 105 131 131
k1 193 204 176 225
k2 100 145 145
∆k ** Brake 56 66 68
Separate fan 71 80 94
Separate fan + brake 118 134 150
Gearbox Gearbox Total length
size o1* p* p1 a h o q k8 k
04 178 151 63 36 63 189 80.5 28 363 404 376 435

Gearbox Solid shaft

size d l l1 l2 d2 u t
k6
04 20 40 5 28 M6 6 22.5

Gearbox Output flange

size a2 b2 c2 e2 f2 i2 s2
j7 4x90°
120 80 100 3 7
04 8 40
160 110 130 3.5 9
Dimensions in [mm]
* Observe k2
** Further attachments in chapter 7

Lenze 5-85
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

5 GKS ÇÇ - 3 M HÇR 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o l* p* h* h1 a k
04 203 115 171 100 71 20 379 390 392 441 469
05 232 140 205 125 80 23 412 461 489 527 557
06 291 160 250 150 100 28 468 517 545 583 613 631 651 631
07 354 200 310 190 120 34 573 601 639 669 687 707 687 782 835 879
09 429 240 386 236 150 41 672 710 740 758 778 758 853 906 950
11 527 290 485 300 185 54 801 831 849 869 849 944 997 1041
14 636 350 605 375 230 67 948 968 948 1043 1096 1140

Gearbox Hollow shaft Pitch circle Foot

size d l d1 l1 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7 JS9 +0.2 H7
25 8 28.3
04 115 45 100 105 75 90 3 2.5 M6x12 45 45 110 119 85 14 105 132 141 22 21 9
30 8 33.3
30 8 33.3
05 140 50 124 118 80 100 4 4 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
35 10 38.3
40 12 43.3
06 160 65 140 140 100 120 4 5 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
45 14 48.8
50 14 53.8
07 200 75 175 165 115 140 5 5 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
55 16 59.3
60 18 64.4
09 240 95 210 205 145 175 6 5 M16x24 90 90 240 266 185 30 222 300 326 30 37 22
70 20 74.9
70 20 74.9
11 290 105 250 240 170 205 6 6 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
80 22 85.4

14 100 350 135 305 28 106.4 290 210 250 6 7 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm] * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a ** Further attachments in chapter 7

5-86 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 3 M HÇR 180 200 225 5
-22 -32 -32 -12 / -22
Motor g 1 350 388 433
g1 Without options 270 291 319
Brake motor 270 309 327
g2 350 400 450
k1 567 605 661 693
k2 300 300 300
∆k ** Brake 145 175 200
Separate fan 299 387 388
Separate fan + brake 424 507 518
Gearbox Gearbox Total length
size o l* p* h h1 a k
09 429 240 386 236 150 41 1234 1272 1353
11 527 290 485 300 185 54 1325 1363 1444 1506
14 636 350 605 375 230 67 1424 1462 1543 1605

Gearbox Hollow shaft Pitch circle Foot

size d l d1 l1 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7 JS9 +0.2 H7
60 18 64.4
09 240 95 210 205 145 175 6 5 M16x24 90 90 240 266 185 30 222 300 326 30 37 22
70 20 74.9
70 20 74.9
11 290 105 250 240 170 205 6 6 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
80 22 85.4

14 100 350 135 305 28 106.4 290 210 250 6 7 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm]

* Observe k2

Lenze 5-87
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

5 GKS ÇÇ - 3 M HAK 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 125
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o o1* p* h* h1 a k8 q k
04 203 148 171 100 71 20 38 90.5 379 390 392 441 469
05 232 173 205 125 80 23 40 103 412 461 489 527 557
06 291 201 250 150 100 28 49 121 468 517 545 583 613 631 651 631
07 354 255 310 190 120 34 65 155 573 601 639 669 687 707 687 782 835 979
09 429 300 386 236 150 41 69 180 672 710 740 758 778 758 853 906 950
11 527 350 485 300 185 54 70 205 801 831 849 869 849 944 997 1041
14 636 410 605 375 230 67 71 235 948 968 948 1043 1096 1140

Gearbox Hollow shaft Output flange

size d l d1 l1 u t a2 b2 c2 e2 f2 i2 s2
H7 JS9 +0.2 j7
25 8 28.3
04 115 45 100 160 110 10 130 3.5 33 4x9
30 8 33.3
30 8 33.3
05 140 50 124 200 130 12 165 3.5 33 4 x 11
35 10 38.3
40 12 43.3 200 130 12 165 3.5 42 4 x 11
06 160 65 140
45 14 48.8 250 180 14.5 215 4 41 4 x 14
50 14 53.8 250 180 14.5 215
07 200 75 175 4 55 4 x 14
55 16 59.3 300 230 16.5 265
60 18 64.4
09 240 95 210 350 250 18 300 4 60 4 x 18
70 20 74.9
70 20 74.9 400 300 20 350 4 x 18
11 290 105 250 5 60
80 22 85.4 450 350 22 400 8 x 18

14 100 350 135 305 28 106.4 450 350 22 400 5 60 8 x 18

Dimensions in [mm] * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a ** Further attachments in chapter 7

5-88 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 3 M HAK 180 200 225 5
-22 -32 -32 -12 / -22
Motor g 1 350 388 433
g1 Without options 270 291 319
Brake motor 270 309 327
g2 350 400 450
k1 567 605 661 693
k2 300 300 300
∆k ** Brake 145 175 200
Separate fan 299 387 388
Separate fan + brake 424 507 518
Gearbox Gearbox Total length
size o o1* p* h h1 a k8 q k
09 429 300 386 236 150 41 69 180 1234 1272 1353
11 527 350 485 300 185 54 70 205 1325 1363 1444 1506
14 636 410 605 375 230 67 71 235 1424 1462 1543 1605

Gearbox Hollow shaft Output flange

size d l d1 l1 u t a2 b2 c2 e2 f2 i2 s2
H7 JS9 +0.2 j7
60 18 64.4
09 240 95 210 350 250 18 300 4 60 4x18
70 20 74.9
70 20 74.9 400 300 20 350 4x18
11 290 105 250 5 60
80 22 85.4 450 350 22 400 8x18
14 100 350 135 305 28 106.4 450 350 22 400 5 60 8x18

Dimensions in [mm]

* Observe k2

Lenze 5-89
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

5 GKS ÇÇ - 3 M VÇR 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o o1* p* h* h1 a q k
04 203 163 171 100 71 20 107.5 379 390 392 441 469
05 232 197 205 125 80 23 130 412 461 489 527 557
06 291 236 250 150 100 28 160 468 517 545 583 613 631 651 631
07 354 296 310 190 120 34 200 573 601 639 669 687 707 687 782 835 879
09 429 356 386 236 150 41 240 672 710 740 758 778 758 853 906 950
11 527 445 485 300 185 54 305 801 831 849 869 849 944 997 1041
14 636 544 605 375 230 67 375 948 968 948 1043 1096 1140

Gearbox Solid shaft Pitch circle Foot

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7
04 25 50 45 4 40 M10 8 28 105 75 90 3 52.5 M6x12 45 45 110 119 85 14 105 132 141 22 21 9
05 30 60 50 6 45 M10 8 33 118 80 100 4 64 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
06 40 80 65 7 63 M16 12 43 140 100 120 4 85 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
07 50 100 75 8 80 M16 14 53.5 165 115 140 5 105 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
09 60 120 95 8 100 M20 18 64 205 145 175 6 125 M16x24 90 90 240 266 185 30 222 300 326 60 37 22
11 80 160 105 15 125 M20 22 74 240 170 205 6 166 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
14 100 200 135 18 160 M24 28 106 290 210 250 6 207 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm] d ≤ 50 mm: k6 ** Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a
d > 50 mm: m6 ** Further attachments in chapter 7

5-90 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 3 M VÇR 180 200 225 5
-22 -32 -32 -12 / -22
Motor g 1 350 388 433
g1 Without options 270 291 319
Brake motor 270 309 327
g2 350 400 450
k1 567 605 661 693
k2 300 300 300
∆k ** Brake 145 175 200
Separate fan 299 387 388
Separate fan + brake 424 507 518
Gearbox Gearbox Total length
size o* o1* p* h h1 a q k
09 429 356 386 236 150 41 240 1234 1272 1353
11 527 445 485 300 185 54 305 1325 1363 1444 1506
14 636 544 605 375 230 67 375 1424 1462 1543 1605

Gearbox Solid shaft Pitch circle

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1
H7
09 60 120 95 8 100 M20 18 64 205 145 175 6 125 M16x24
11 80 160 105 15 125 M20 22 85 240 170 205 6 166 M20x32
14 100 200 135 18 160 M24 28 106 290 210 250 6 207 M24x35

Gearbox Foot
size a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
09 90 90 240 266 185 30 222 300 326 60 37 22
11 105 105 290 325 225 40 270 363 398 73 43 26
14 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm]

d ≤ 50 mm: k6
d > 50 mm: m6
* Observe k2

Lenze 5-91
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

5 GKS ÇÇ - 3 M VAK 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o o1* p* h* h1 a k8 q k
04 203 196 171 100 71 20 38 90.5 379 390 392 441 469
05 232 230 205 125 80 23 40 103 412 461 489 527 557
06 291 277 250 150 100 28 49 121 468 517 545 583 613 631 651 631
07 354 351 310 190 120 34 65 155 573 601 639 669 687 707 687 782 835 879
09 429 416 386 236 150 41 69 180 672 710 740 758 778 758 853 906 950
11 527 505 485 300 185 54 70 205 801 831 849 869 849 944 997 1041
14 636 604 605 375 230 67 71 235 948 968 948 1043 1096 1140

Gearbox Solid shaft Output flange

size d l l1 l2 d2 u t a2 b2 c2 e2 f2 i2 s2
j7
04 25 50 4 40 M10 8 28 160 110 10 130 3.5 50 4x9
05 30 60 6 45 M10 8 33 200 130 12 165 3.5 60 4 x 11
06 40 80 7 63 M16 12 43 250 180 14.5 215 4 80 4 x 14
250 180 14.5 215
07 50 100 8 80 M16 14 53.5 4 100 4 x 14
300 230 16.5 265
09 60 120 8 100 M20 18 64 350 250 18 300 4 120 4 x 18
400 300 20 350 4 x 18
11 80 160 15 125 M20 22 85 5 160
450 350 22 400 8 x 18
14 100 200 18 160 M24 28 106 450 350 22 400 5 200 8 x 18
Dimensions in [mm] d ≤ 50 mm: k6 * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a
d > 50 mm: m6 ** Further attachments in chapter 7

5-92 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 3 M VAK 180 200 225
-22 -32 -32 -12 / -22
Motor g 1 350 388 433
g1 Without options 270 291 319 5
Brake motor 270 309 327
g2 350 400 450
k1 567 605 661 693
k2 300 300 300
∆k ** Brake 145 175 200
Separate fan 299 387 388
Separate fan + brake 424 507 518
Gearbox Gearbox Total length
size o o1* p* h h1 a k8 q k
09 429 416 386 236 150 41 69 180 1234 1272 1353
11 527 505 485 300 185 54 70 205 1325 1363 1444 1506
14 636 604 605 375 230 67 71 235 1424 1462 1543 1605

Gearbox Solid shaft Output flange

size d l l1 l2 d2 u t a2 b2 c2 e2 f2 i2 s2
j7
09 60 120 8 100 M20 18 64 350 250 18 300 4 120 4x18
400 300 20 350 4x18
11 80 160 15 125 M20 22 85 5 160
450 350 22 400 8x18
14 100 200 18 160 M24 28 106 450 350 22 400 5 200 8x18
Dimensions in [mm]

d ≤ 50 mm: k6
d > 50 mm: m6
* Observe k2

Lenze 5-93
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

5 GKS ÇÇ - 4 M HÇR 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o l* p* h h1 a k
05 226 140 205 125 80 13 476 487 489 538 565
06 288 160 250 150 100 8 549 560 562 611 638
07 351 200 310 190 120 11 629 678 705 743 773
09 426 240 386 236 150 15 718 767 794 832 862 881 901 881
11 523 290 485 300 185 16 877 904 942 972 991 1011 991 1085
14 632 350 605 375 230 22 1037 1075 1105 1124 1144 1124 1218 1272 1316

Gearbox Hollow shaft Pitch circle Foot

size d l d1 l1 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7 JS9 +0.2 H7 6x60°
30 8 33.3
05 140 50 124 118 80 100 4 4 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
35 10 38.3
40 12 43.3
06 160 65 140 140 100 120 4 5 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
45 14 48.8
50 14 53.8
07 200 75 175 165 115 140 5 5 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
55 16 59.3
60 18 64.4
09 240 95 210 205 145 175 6 5 M16x24 90 90 240 266 185 30 222 300 326 60 37 22
70 20 74.9
70 20 74.9
11 290 105 250 240 170 205 6 6 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
80 22 85.4

14 100 350 135 305 28 106.4 290 210 250 6 7 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm]

* Observe k2
**Further attachments in chapter 7

5-94 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 4 M HAK 063 071 080 090 100 112 132 160 5
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o o1* p* h h1 a k8 q k
05 226 173 205 125 80 13 40 103 476 487 489 538 565
06 288 201 250 150 100 8 49 121 549 560 562 611 638
07 351 255 310 190 120 11 65 155 629 678 705 743 773
09 426 300 386 236 150 15 69 180 718 767 794 832 862 881 901 881
11 523 350 485 300 185 16 70 205 877 904 942 972 991 1011 991 1085
14 632 410 605 375 230 22 71 235 1037 1075 1105 1124 1144 1124 1218 1272 1316

Gearbox Hollow shaft Output flange

size d l d1 l1 u t a2 b2 c2 e2 f2 i2 s2
H7 JS9 j7
30 8 33.3
05 140 50 124 200 130 12 165 3.5 33 4x11
35 10 38.8
40 12 43.3 200 130 12 165 3.5 42 4x11
06 160 65 140
45 14 48.8 250 180 14.5 215 4 41 4x14
50 14 53.8 250 180 14.5 215
07 200 75 175 4 55 4x14
55 16 59.3 300 230 16.5 265
60 18 64.4
09 240 95 210 350 250 18 300 4 60 4x18
70 20 74.9
70 20 74.9 400 300 20 350 4x18
11 290 105 250 5 60
80 22 85.4 450 350 22 400 8x18
14 100 350 135 305 28 106.4 450 350 22 400 5 60 8x18

Dimensions in [mm]

* Observe k2
** Further attachments in chapter 7

Lenze 5-95
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 4 M VÇR 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
5 g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o o1* p* h h1 a q k
05 226 197 205 125 80 13 130 476 487 489 538 565
06 288 236 250 150 100 8 160 549 560 562 611 638
07 351 296 310 190 120 11 200 629 678 705 743 773
09 426 356 386 236 150 15 240 718 767 794 832 862 881 901 881
11 523 445 485 300 185 16 305 877 904 942 972 991 1011 991 1085
14 632 544 605 375 230 22 375 1037 1075 1105 1124 1144 1124 1218 1272 1316

Gearbox Solid shaft Pitch circle

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1
H7 6x60°
05 30 60 50 6 45 M10 8 33 118 80 100 4 64 M8x15
06 40 80 65 7 63 M16 12 43 140 100 120 4 85 M10x16
07 50 100 75 8 80 M16 14 53.5 165 115 140 5 105 M12x18
09 60 120 95 8 100 M20 18 64 205 145 175 6 125 M16x24
11 80 160 105 15 125 M20 22 85 240 170 205 6 166 M20x32
14 100 200 135 18 160 M24 28 106 290 210 250 6 207 M24x35

Gearbox Foot
size a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
05 47.5 47.5 115 140 105 17 127 144 169 29 21 11
06 60 60 155 170 120 20 145 191 206 36 23 14
07 70 70 190 210 150 25 180 235 255 45 28 18
09 90 90 240 266 185 30 222 300 326 60 37 22
11 105 105 290 325 225 40 270 363 398 73 43 26
14 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm] d ≤ 50 mm: k6 Observe k2

d > 50 mm: m6 ** Further attachments in chapter 7

5-96 Lenze
 Dimensions – (Helical)-bevel gearboxes
Geared motors

Geared motor Motor frame size

GKS ÇÇ - 4 M VAK 063 071 080 090 100 112 132 160 5
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 1 129 142 156 178 194 222 262 310
g1 Without options 105 130 130 141 154 167 202 215
Brake motor 105 131 131 142 160 167 202 215
k1 193 204 176 225 242 280 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
∆k ** Brake 56 66 68 74 94 101 127 113
Separate fan 71 80 94 101 97 95 104 113
Separate fan + brake 118 134 150 164 169 183 218 225
Gearbox Gearbox Total length
size o* o1* p* h h1 a k8 q k
05 226 230 205 125 80 13 40 103 476 487 489 538 565
06 288 277 250 150 100 8 49 121 549 560 562 611 638
07 351 351 310 190 120 11 65 155 629 678 705 743 773
09 426 416 386 236 150 15 69 180 718 767 794 832 862 881 901 881
11 523 505 485 300 185 16 70 205 877 904 942 972 991 1011 991 1085
14 632 604 605 375 230 22 71 235 1037 1075 1105 1124 1144 1124 1218 1272 1316

Gearbox Solid shaft Output flange

size d l l1 l2 d2 u t a2 b2 c2 e2 f2 i2 s2
j7
05 30 60 6 45 M10 8 33 200 130 12 165 3.5 60 4x11
06 40 80 7 63 M16 12 43 250 180 14.5 215 4 80 4x14
250 180 14.5 215
07 50 100 8 80 M16 14 53.5 4 100 4x14
300 230 16.5 265
09 60 120 8 100 M20 18 64 350 250 18 300 4 120 4x18
400 300 20 350 4x18
11 80 160 15 125 M20 22 85 5 160
450 350 22 400 8x18
14 100 200 18 160 M24 28 106 450 350 22 400 5 200 8x18

Dimensions in [mm]

d ≤ 50 mm: k6
d > 50 mm: m6
* Observe k2
** Further attachments in chapter 7

Lenze 5-97
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

5
Gearbox Drive size

GKRÇÇ - 2N HÇR corresponds to IEC motor

1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
Housing k1 75 77 75 91 91 91 91
k2 120 145 120 145 145 145 145
Flange a3 90 105 90 160 160 105 120
b3 H8 60 70 60 110 110 70 80
c3 7 8 7 10 10 8 8
e3 75 85 75 130 130 85 100
f3 3 3 3 4 4 3 3.5
s3 4x 5.5 6.6 5.5 9 9 6.6 6.6
Required d3 11 14 11 19 14 14 14
motor shaft l3 min 23 30 23 25 25 25 25
max 23 30 23 40 40 40 40
u1 4 5 4 6 5 5 5
t1 12.5 16 12.5 21.5 16 16 16
Gearbox Gearbox Total length
size l p p1 a h o k
04 120 151 63 36 63 189 271 278 271 292

Gearbox Hollow shaft Pitch circle

size d l d1 l1 u t1) a1 b1 e1 f1 i1 s1
H7 JS9 +0.1 J7
04 20 30 6 22.8
120 106 104 62 88 3 2.5 M8 x 16
25 35 8 27.0

Gearbox Foot Torque plate

size b5 b7 c5 e5 f5 n m s5 a7 a8 s6

04 70 90 8 105 95 25 28 9 88 65 25 x 17
Dimensions in [mm] 1) If the hollow shaft diameter is d=25 mm use a flat key to DIN 6885/3

5-98 Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

5
Gearbox Drive size

GKRÇÇ - 2N HAK corresponds to IEC motor

1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
Housing k1 75 77 75 91 91 91 91
k2 120 145 120 145 145 145 145
Flange a3 90 105 90 160 160 105 120
b3 H8 60 70 60 110 110 70 80
c3 7 8 7 10 10 8 8
e3 75 85 75 130 130 85 100
f3 3 3 3 4 4 3 3.5
s3 4x 5.5 6.6 5.5 9 9 6.6 6.6
Required d3 11 14 11 19 14 14 14
motor shaft l3 min 23 30 23 25 25 25 25
max 23 30 23 40 40 40 40
u1 4 5 4 6 5 5 5
t1 12.5 16 12.5 21.5 16 16 16
Gearbox Gearbox Total length
size o1 p p1 a h k8 o q k
04 140 151 63 36 63 28 189 80 271 278 271 292

Gearbox Hollow shaft Output flange

size d l d1 l1 u t1) a2 b2 c2 e2 f2 i2 s2
H7 JS9 +0.1 j7 4 x 90º
20 30 6 22.8 120 80 100 3 7
04 120 106 8.0 20
25 35 8 27 160 110 130 3.5 9

Dimensions in [mm] 1) If the hollow shaft diameter is d=25 mm use a flat key to DIN 6885/3

Lenze 5-99
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

5
Gearbox Drive size

GKRÇÇ - 2N VÇR corresponds to IEC motor

1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
Housing k1 75 77 75 91 91 91 91
k2 120 145 120 145 145 145 145
Flange a3 90 105 90 160 160 105 120
b3 H8 60 70 60 110 110 70 80
c3 7 8 7 10 10 8 8
e3 75 85 75 130 130 85 100
f3 3 3 3 4 4 3 3.5
s3 4x 5.5 6.6 5.5 9 9 6.6 6.6
Required d3 11 14 11 19 14 14 14
motor shaft l3 min 23 30 23 25 25 25 25
max 23 30 23 40 40 40 40
u1 4 5 4 6 5 5 5
t1 12.5 16 12.5 21.5 16 16 16
Gearbox Gearbox Total length
size o1 p p1 a h o q k
04 158 151 63 36 63 189 100 271 278 271 292

Gearbox Solid shaft Pitch circle

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1
k6 J7
04 20 40 30 5 28 M6 6 22.5 104 62 88 3 42.5 M8 x 16

Gearbox Foot Torque plate

size b5 b7 c5 e5 f5 n m s5 a7 a8 s6

04 70 90 8 105 95 25 28 9 88 65 25 x 17
Dimensions in [mm]

5-100 Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

5
Gearbox Drive size

GKRÇÇ - 2N VAK corresponds to IEC motor

1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
Housing k1 75 77 75 91 91 91 91
k2 120 145 120 145 145 145 145
Flange a3 90 105 90 160 160 105 120
b3 H8 60 70 60 110 110 70 80
c3 7 8 7 10 10 8 8
e3 75 85 75 130 130 85 100
f3 3 3 3 4 4 3 3.5
s3 4x 5.5 6.6 5.5 9 9 6.6 6.6
Required d3 11 14 11 19 14 14 14
motor shaft l3 min 23 30 23 25 25 25 25
max 23 30 23 40 40 40 40
u1 4 5 4 6 5 5 5
t1 12.5 16 12.5 21.5 16 16 16
Gearbox Gearbox Total length
size o1 p p1 a h o q k8 k
04 178 151 63 36 63 189 80.5 28 271 278 271 292

Garbox Solid shaft

size d l l1 l2 d2 u t
k6
04 20 40 5 28 M6 6 22.5

Garbox Output flange

size a2 b2 c2 e2 f2 i2 s2
j7 4 x 90º
120 80 100 3 7
04 8 40
160 110 130 3.5 9
Dimensions in [mm]

Lenze 5-101
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 3 N HÇR 1A 1B 2B 1C 2C 3C 4C 1D 2D 1E 2E 3E 1F 2F 1G 2G 1H 2H 3H 1K 2K
corresponds to IEC motor 63 71 63 80 71 71 90 80 100 90 80 100 90 132 100 160 180 132 200 225
112 112 112
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188 243 273
5 k2 120 145 120 145 180 180 180 265 300 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300 400 450
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230 300 350
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18 20
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265 350 400
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5 6
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5 17.5
8x 17.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38 55 60
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80 110 140
max 23 30 23 40 50 50 60 60 80 60 110 110 80 110 140
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10 16 18
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41 59 64
Gearbox Gearbox Total length
size o l* p* h* h1 a k
04 203 115 171 100 71 20 287 294 287 308 342
05 232 140 205 125 80 23 314 328 362 357
06 291 160 250 150 100 28 370 384 418 413 442
07 354 200 310 190 120 34 440 474 469 498 553 533 596 566
09 429 240 386 236 150 41 545 540 569 624 604 667 667 637 692
11 527 290 485 300 185 54 631 660 715 695 758 758 728 783 813
14 636 350 605 375 230 67 814 794 857 857 827 882 912

Gearbox Hollow shaft Pitch circle Foot

size d l d1 l1 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7 JS9 +0.2 H7
25 8 28.3
04 115 45 100 105 75 90 3 2.5 M6x12 45 45 110 119 85 14 105 132 141 22 21 9
30 8 33.3
30 8 33.3
05 140 50 124 118 80 100 4 4 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
35 10 33.3
40 12 43.3
06 160 65 140 140 100 120 4 5 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
45 14 48.8
50 14 53.8
07 200 75 175 165 115 140 5 5 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
55 16 59.3
60 18 64.4
09 240 95 210 205 145 175 6 5 M16x24 90 90 240 266 185 30 222 300 326 60 37 22
70 20 74.9
70 20 74.9
11 290 105 250 240 170 205 6 6 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
80 22 85.4

14 100 350 135 305 28 106.4 290 210 250 6 7 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

5-102
Dimensions in [mm] * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a
Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 3 N HAK 1A 1B 2B 1C 2C 3C 4C 1D 2D 1E 2E 3E 1F 2F 1G 2G 1H 2H 3H 1K 2K
corresponds to IEC motor 63 71 63 80 71 71 90 80 100 90 80 100 90 132 100 160 180 132 200 225
112 112 112
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188 243 273
k2 120 145 120 145 180 180 180 265 300 300 5
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300 400 450
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230 300 350
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18 20
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265 350 400
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5 6
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5 17.5
8x 17.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38 55 60
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80 110 140
max 23 30 23 40 50 50 60 60 80 60 110 110 80 110 140
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10 16 18
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41 59 64
Gearbox Gearbox Total length
size o o1* p* h* h1 a k8 q
04 203 148 171 100 71 20 38 90.5 287 294 287 308 342
05 232 173 205 125 80 23 40 103 314 328 362 357
06 291 201 250 150 100 28 49 121 370 384 418 413 442
07 354 255 310 190 120 34 65 155 440 474 469 498 553 533 596 566
09 429 300 386 236 150 41 69 180 545 540 569 624 604 667 667 637 692
11 527 350 485 300 185 54 70 205 631 660 715 695 758 758 728 783 813
14 636 410 605 375 230 67 71 235 814 794 857 857 827 882 912

Gearbox Hollow shaft Output flange

size d l d1 l1 u t a2 b2 c2 e2 f2 i2 s2
H7 JS9 +0.2 j7
25 8 28.3
04 115 45 100 160 110 10 130 3.5 33 4x9
30 8 38.3
30 8 33.3
05 140 50 124 200 130 12 165 3.5 33 4 x 11
35 10 33.3
40 12 43.3 200 130 12 165 3.5 42 4 x 11
06 160 65 140
45 14 48.8 250 180 14.5 215 4 41 4 x 14
50 14 53.8 250 180 14.5 215
07 200 75 175 4 55 4 x 14
55 16 59.3 300 230 16.5 265
60 18 64.4
09 240 95 210 350 250 18 300 4 60 4 x 18
70 20 74.9
70 20 74.9 400 300 20 350 4 x 18
11 290 105 250 5 60
80 22 85.4 450 350 22 400 8 x 18
14 100 350 135 305 28 106.4 450 350 22 400 5 60 8 x 18

Lenze Dimensions in [mm] * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a
5-103
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

5 GKS ÇÇ - 3 N VÇR 1A 1B 2B 1C 2C 3C 4C 1D 2D 1E 2E 3E 1F 2F 1G 2G 1H 2H 3H 1K 2K
corresponds to IEC motor 63 71 63 80 71 71 90 80 100 90 80 100 90 132 100 160 180 132 200 225
112 112 112
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188 243 273
k2 120 145 120 145 180 180 180 265 300 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300 400 450
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230 300 350
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18 20
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265 350 400
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5 6
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5 17.5
8x 17.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38 55 60
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80 110 140
max 23 30 23 40 50 50 60 60 80 60 110 110 80 110 140
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10 16 18
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41 59 64
Gearbox Gearbox Total length
size o o1* p* h* h1 a q k
04 203 163 171 100 71 20 107.5 287 294 287 308 342
05 232 197 205 125 80 23 130 314 328 362 357
06 291 236 250 150 100 28 160 370 384 418 413 442
07 354 296 310 190 120 34 200 440 474 469 498 553 533 596 566
09 429 356 386 236 150 41 240 545 540 569 624 604 667 667 637 692
11 527 445 485 300 185 54 305 631 660 715 695 758 758 728 783 813
14 636 544 605 375 230 67 375 814 794 857 857 827 882 912

Gearbox Solid shaft Pitch circle Foot

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7
04 25 50 45 4 40 M10 8 28 105 75 90 3 52.5 M6x12 45 45 110 119 85 14 105 132 141 22 21 9
05 30 60 50 6 45 M10 8 33 118 80 100 4 64 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
06 40 80 65 7 63 M16 12 43 140 100 120 4 85 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
07 50 100 75 8 80 M16 14 53.5 165 115 140 5 105 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
09 60 120 95 8 100 M20 18 64 205 145 175 6 125 M16x24 90 90 240 266 185 30 222 300 326 60 37 22
11 80 160 105 15 125 M20 22 85 240 170 205 6 166 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
14 100 200 135 18 160 M24 28 106 290 210 250 6 207 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm] d ≤ 50 mm: k6 * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a
d > 50 mm: m6
5-104 Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 3 N VAK 1A 1B 2B 1C 2C 3C 4C 1D 2D 1E 2E 3E 1F 2F 1G 2G 1H 2H 3H 1K 2K
corresponds to IEC motor 63 71 63 80 71 71 90 80 100 90 80 100 90 132 100 160 180 132 200 225
112 112 112
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188 243 273 5
k2 120 145 120 145 180 180 180 265 300 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300 400 450
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230 300 350
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18 20
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265 350 400
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5 6
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5 17.5
8x 17.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38 55 60
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80 110 140
max 23 30 23 40 50 50 60 60 80 60 110 110 80 110 140
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10 16 18
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41 59 64
Gearbox Gearbox Total length
size o o1* p* h* h1 a k8 q
04 203 169 171 100 71 20 38 90.5 287 294 287 308 342
05 232 230 205 125 80 23 40 103 314 328 362 357
06 291 277 250 150 100 28 49 121 370 384 418 413 442
07 354 351 310 190 120 34 65 155 440 474 469 498 553 533 596 566
09 429 416 386 236 150 41 69 180 545 540 569 624 604 667 667 637 692
11 527 505 485 300 185 54 70 205 631 660 715 695 758 758 728 783 813
14 636 604 605 375 230 67 71 235 814 794 857 857 827 882 912

Gearbox Solid shaft Output flange

size d l l1 l2 d2 u t a2 b2 c2 e2 f2 i2 s2
j7
04 25 50 4 40 M10 8 28 160 110 10 130 3.5 50 4x9
05 30 60 6 45 M10 8 33 200 130 12 165 3.5 60 4x11
06 40 80 7 63 M16 12 43 250 180 14.5 215 4 80 4x14
250 180 14.5 215
07 50 100 8 80 M16 14 53.5 4 100 4x14
300 230 16.5 265
09 60 120 8 100 M20 18 64 350 250 18 300 4 120 4x18
400 300 20 350 4x18
11 80 160 15 125 M20 22 85 5 160
450 350 22 400 8x18
14 100 200 18 160 M24 28 106 450 350 22 400 5 200 8x18

Dimensions in [mm] d ≤ 50 mm: k6 * Observe dimension k2, with gearbox size 04 and motor frame size 090 dimension k2/2 > h-a
d > 50 mm: m6

Lenze 5-105
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 4 N HÇR 1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
1D
90
2D 1E 2E
80 100 90
3E
80
1F
110
2F
90
1G 2G
132 100 160
1H 2H
180
3H
132
corresponds to IEC motor
112 112 112
5 Housing k1 75 77 75 91 115 110 139 180 160 218 218 188
k2 120 145 120 145 180 180 180 265 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80
max 23 30 23 40 50 50 60 60 80 60 110 110 80
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41
Gearbox Gearbox Total length
size o l* p* h h1 a k
05 226 140 205 125 80 13 383 390 383 404 438
06 288 160 250 150 100 8 456 463 456 477 511
07 351 200 310 190 120 11 530 544 578 573
09 426 240 386 236 150 15 619 633 667 662 691
11 523 290 485 300 185 16 743 777 772 801 856 836
14 632 350 605 375 230 22 910 905 934 989 969 1032 1032 1002

Gearbox Hollow shaft Pitch circle Foot

size d l d1 l1 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7 JS9 +0.2 H7 6x60°
30 8 33.3
05 140 50 124 118 80 100 4 4 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
35 10 38.8
40 12 43.3
06 160 65 140 140 100 120 4 5 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
45 14 48.8
50 14 53.8
07 200 75 175 165 115 140 5 5 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
55 16 59.3
60 18 64.4
09 240 95 210 205 145 175 6 5 M16x24 90 90 240 266 185 30 222 300 326 30 37 22
70 20 74.9
70 290 105 250 20 74.9 240 170 205
11 6 6 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
80 22 85.4
14 100 350 135 305 28 106.4 290 210 250 6 7 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm]
* Observe k2

5-106 Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 4 N HAK 1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
1D
90
2D 1E 2E
80 100 90
3E
80
1F
110
2F
90
1G
132 100 160
2G 1H 2H
180
3H
132
corresponds to IEC motor
112 112 112
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188 5
k2 120 145 120 145 180 180 180 265 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80
max 23 30 23 40 50 50 60 60 80 60 110 110 80
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41
Gearbox Gearbox Total length
size o o1* p * h h1 a k8 q k
05 226 173 205 125 80 13 40 103 383 390 383 404 438
06 288 201 250 150 100 8 49 121 456 463 456 477 511
07 351 255 310 190 120 11 65 155 530 544 578 573
09 426 300 386 236 150 15 69 180 619 633 667 662 691
11 523 350 485 300 185 16 70 205 743 777 772 801 856 836
14 632 410 605 375 230 22 71 235 910 905 934 989 969 1032 1032 1002

Gearbox Hollow shaft Output flange

size d l d1 l1 u t a2 b2 c2 e2 f2 i2 s2
H7 JS9 +0.2 j7
30 8 33.3
05 140 50 124 200 130 12 165 3.5 33 4 x 11
35 10 38.8
40 12 43.3 200 130 12 165 3.5 42 4 x 11
06 160 65 140
45 14 48.8 250 180 14.5 215 4 41 4 x 14
50 14 53.8 250 180 14.5 215
07 200 75 175 4 55 4 x 14
55 16 59.3 300 230 16.5 265
60 18 64.4
09 240 95 210 350 250 18 300 4 60 4 x 18
70 20 74.9
70 20 74.9 400 300 20 350 4 x 18
11 290 105 250 5 60
80 22 85.4 450 350 22 400 8 x 18
14 100 350 135 305 28 106.4 450 350 22 400 5 60 8 x 18
Dimensions in [mm]
* Observe k2

Lenze 5-107
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 4 N VÇR 1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
1D
90
2D 1E 2E
80 100 90
3E
80
1F
110
2F
90
1G 2G
132 100 160
1H 2H
180
3H
132
corresponds to IEC motor
5 112 112 112
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188
k2 120 145 120 145 180 180 180 265 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80
max 23 30 23 40 50 50 60 60 80 60 110 110 80
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41
Gearbox Gearbox Total length
size o o1* p* h h1 a q k
05 226 197 205 125 80 13 130 383 390 383 404 438
06 288 236 250 150 100 8 160 456 463 456 477 511
07 351 296 310 190 120 11 200 530 544 578 573
09 426 356 386 236 150 15 240 619 633 667 662 691
11 523 445 485 300 185 16 305 743 777 772 801 856 836
14 632 544 605 375 230 22 375 910 905 934 989 969 1032 1032 1002

Gearbox Solid shaft Pitch circle Foot

size d l d1 l1 l2 d2 u t a1 b1 e1 f1 i1 s1 a5 a6 b5 b6 b7 c5 e5 f5 f6 n m s5
H7 6x60°
05 30 60 50 6 45 M10 8 33 118 80 100 4 64 M8x15 47.5 47.5 115 140 105 17 127 144 169 29 21 11
06 40 80 65 7 63 M16 12 43 140 100 120 4 85 M10x16 60 60 155 170 120 20 145 191 206 36 23 14
07 50 100 75 8 80 M16 14 53.5 165 115 140 5 105 M12x18 70 70 190 210 150 25 180 235 255 45 28 18
09 60 120 95 8 100 M20 18 64 205 145 175 6 125 M16x24 90 90 240 266 185 30 222 300 326 30 37 22
11 80 160 105 15 125 M20 22 74 240 170 205 6 166 M20x32 105 105 290 325 225 40 270 363 398 73 43 26
14 100 200 135 18 160 M24 28 106 290 210 250 6 207 M24x35 135 135 360 415 275 50 328 442 497 82 52 33

Dimensions in [mm] d ≤ 50 mm: k6

d > 50 mm: m6
* Observe k2

5-108 Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with mounting flange for IEC standard motors

Gearbox Drive size

GKS ÇÇ - 4 N VAK 1A
63
1B
71
2B
63
1C
80
2C 3C
71
4C
71
1D
90
2D 1E 2E
80 100 90
3E
80
1F
110
2F
90
1G
132 100 160
2G 1H 2H
180
3H
132
corresponds to IEC motor
112 112 112 5
Housing k1 75 77 75 91 115 110 139 180 160 218 218 188
k2 120 145 120 145 180 180 180 265 300
Flange a3 90 105 90 160 160 105 120 160 160 160 300 250 350 350 300
b3 H8 60 70 60 110 110 70 80 110 110 110 230 180 250 250 230
c3 7 8 7 10 10 8 8 10 10 10 18 20 20 18
e3 75 85 75 130 130 85 100 130 130 130 265 215 300 300 265
f3 3 3 4 4 3 3.5 4 4 4 4.5 6 6 4.5
s3 4 x 5.5 6.6 5.5 9 9 6.6 6.6 9 9 9 13.5 17.5 17.5 13.5
Required d3 11 14 11 19 14 14 14 24 19 28 24 19 28 24 38 28 42 48 38
motor shaft
l3 min 23 30 23 25 50 40 30 30 80 60 110 110 80
max 23 30 23 40 50 50 60 60 80 60 110 110 80
u1 4 5 4 6 5 5 5 8 6 8 8 6 8 8 10 8 12 14 10
t1 12.5 16 12.5 21.5 16 16 16 27 21.5 31 27 21.5 31 27 41 31 45 51.5 41
Gearbox Gearbox Total length
size o o1* p * h h1 a k8 q k
05 226 230 205 125 80 13 40 103 383 390 383 404 438
06 288 277 250 150 100 8 49 121 456 463 456 477 511
07 351 351 310 190 120 11 65 155 530 544 578 573
09 426 416 386 236 150 15 69 180 619 633 667 662 691
11 523 505 485 300 185 16 70 205 743 777 772 801 856 836
14 632 604 605 375 230 22 71 235 910 905 934 989 969 1032 1032 1002

Gearbox Solid shaft Output flange

size d l l1 l2 d2 u t a2 b2 c2 e2 f2 i2 s2
j7
05 30 60 6 45 M10 8 33 200 130 12 165 3.5 60 4x11
06 40 80 7 63 M16 12 43 250 180 14.5 215 4 80 4x14
250 180 14.5 215
07 50 100 8 80 M16 14 53.5 4 100 4x14
300 230 16.5 265
09 60 120 8 100 M20 18 64 350 250 18 300 4 120 4x18
400 300 20 350 4x18
11 80 160 15 125 M20 22 85 5 160
450 350 22 400 8x18
14 100 200 18 160 M24 28 106 450 350 22 400 5 200 8x18

Dimensions in [mm] d ≤ 50 mm: k6

d > 50 mm: m6
* Observe k2

Lenze 5-109
 Dimensions – (Helical)-bevel gearboxes
Gearbox with free input shaft

Gearbox Drive size

GKSÇÇ - 3 W ÇÇÇ 1A 1B 1C 1D 1E 1F 1G 1H 1K
Housing k1 100 100 102 130 160 175 175 182 220
k2 115 115 145 145 180 222 222 300 300
Pitch circle p4 80 86 90 120 142 178 216 262 262
5 with centering b4 js 8 52 52 52 65 78 98 125 155 155
e4 67 67 67 90 115 145 175 210 210
f4 12 12 12 12 22 23 23 23 32
4x M6x12 M6x12 M6x12 M8x16 M10x20
s4
8x M12x24 M16x30 M20x36 M20x36
Free input shaft d4 k6 14 14 14 19 24 28 38 42 48
l4 35 35 40 50 60 80 100 110 110
l5 4.5 4.5 4 4 6 7 8 8 8
l6 25 25 32 40 45 63 80 90 90
d5 M6 M6 M6 M6 M8 M10 M12 M16 M16
u2 5 5 5 6 8 8 10 12 14
t2 16 16 16 21.5 27 31 41 45 51.5
Gearbox Gearbox* Total length
size
h1 a k
04 71 20 287 287 319
05 80 23 314 339 367
06 100 28 395 423 463 484
07 120 34 479 519 540 540
09 150 41 590 611 611 631
11 185 54 702 702 722 760
14 230 67 801 821 859

Dimensions in [mm]
* For further dimensions see Dimensions – (Helical)-bevel geared motors

5-110 Lenze
 Dimensions – (Helical)-bevel gearboxes
Gearbox with free input shaft

Gearbox Drive size

GKSÇÇ - 4 W ÇÇÇ 1A 1B 1C 1D 1E 1F 1G 1H
Housing k1 100 100 102 130 160 175 175 182
k2 115 115 145 145 180 222 222 300
Pitch circle p4 80 86 90 120 142 178 216 262
with centering b4 js 8 52 52 52 65 78 98 125 155
5
e4 67 67 67 90 115 145 175 210
f4 12 12 12 12 22 23 23 23
4x M6x12 M6x12 M6x12 M8x16 M10x20
s4
8x M12x24 M16x30 M20x36
Free d4 k6 14 14 14 19 24 28 38 42
input shaft l4 35 35 40 50 60 80 100 110
l5 4.5 4.5 4 4 6 7 8 8
l6 25 25 32 40 45 63 80 90
d5 M6 M6 M6 M6 M8 M10 M12 M16
u2 5 5 5 6 8 8 10 12
t2 16 16 16 21.5 27 31 41 45
Gearbox
Gearbox* Total length
size
h1 a k
05 80 13 383 383 415
06 100 8 456 456 488
07 120 11 530 555 583
09 150 15 644 672 712 733
11 185 16 782 822 843 843
14 230 22 955 976 976 996

Dimensions in [mm]
* For further dimensions see Dimensions – (Helical)-bevel geared motors

Lenze 5-111
 Dimensions – (Helical)-bevel gearboxes
Rubber buffer for torque plate

Bevel gearbox GKR ÇÇ

Gearbox size
d D c
04 10 25 13

5-112 Lenze
 Dimensions – (Helical)-bevel gearboxes
Torque plate at housing foot

Helical-bevel gearbox GKS ÇÇ

Position 2

Position 6 5

Position 4

Gearbox size a4 a7 a8 a9 b8 c d D e5 k7

04 41 27.5 106 135 60 14.5 11 30 100 20

05 45 35 115 160 70 15 13 40 127 25

06 72 40 145 195 80 27 17 50 145 30

07 78 50 170 240 100 28 21 60 180 35

09 86 60 214 300 120 29 26 72 222 46

11 94 72.5 260 375 145 30 33 92 270 55

14 100 85 320 465 180 30 39 110 328 70

Dimensions in [mm]

Lenze 5-113
 Dimensions – (Helical)-bevel gearboxes
Torque plate at pitch circle

In position 3 at bevel gearbox GKR ÇÇ

In position 5 at bevel gearbox GKR ÇÇ

5

Gearbox size Torque plate

a4 a8 a9 d D k6 p8 p9
04 13 110 9 10 25 11 128 52

Dimensions in [mm]

5-114 Lenze
 Dimensions – (Helical)-bevel gearboxes
Torque plate at pitch circle

In position 3 at helical-bevel gearbox GKS ÇÇ

In position 5 at helical-bevel gearbox GKS ÇÇ

Gearbox Assembly space Torque plate

size a7 b4 a4 a8 a9 d D k6

04 24 34.5 30 130 26.5 12 35 16

05 23.5 38.5 34 160 27.5 16 45 15

06 28 44.5 40 200 33 20 50 18

07 32.5 50.5 46 250 37.5 25 65 21

Dimensions in [mm]

Lenze 5-115
 Dimensions – (Helical)-bevel gearboxes
Hollow shaft with shrink disc

Bevel gearbox GKR ÇÇ

Machine shaft * Hollow shaft Gearbox Cover

Gearbox size d Fit l l1 f5 g2 k10 g3 k11

04 20 h6 140 120 20 50 144 79 41

Helical-bevel gearbox GKS ÇÇ

Machine shaft * Hollow shaft Gearbox Protection cover

Gearbox size d Fit l l1 f5 g2 k10 g3 k11

25
04 h6 142 122 26 72 146 79 41
30

05 35 h6 168 148 28 80 171 90 43

06 40 h6 194 164 30 90 197 100 49

07 50 h6 232 192 26 110 234 124 49

09 65 h6 278 228 30 141 281 159 52

11 80 h6 338 238 42 170 344 191 65

14 100 h6 407 307 55 215 415 253 78

* Ensure sufficient shaft material strength when using the shrink disc design. When you
use common steel (e.g. C45, 42CrMo4) the torques listed in the selection tables can be
transmitted without any restrictions. For the use of materials of less strength, please
contact Lenze.
Dimensions in [mm]

5-116 Lenze
 Dimensions – (Helical)-bevel gearboxes
Jet-proof hollow shaft cover

Helical-bevel gearboxes GKS ÇÇ

(Seal)

k11

(incl. seal)

Protection cover
Gearbox size k11

04 9

05 10
5
06 11

07 11

09 54

11 67

14 80

Dimensions in [mm]

Lenze 5-117
 Dimensions – (Helical)-bevel gearboxes
Gearboxes with 2nd output shaft end

Bevel gearbox GKR ÇÇ

Gearbox size d l i1 i2 o1

04 20 40 42.5 19.5 200

Helical-bevel gearbox GKS ÇÇ

5

Gearbox size d l i1 i2 o1

04 25 50 52.5 17 215

05 30 60 64 27 260

06 40 80 85 39 320

07 50 100 105 45 400

09 60 120 125 60 480

11 80 160 166 100 610

14 100 200 207 140 750

Dimensions in [mm]

5-118 Lenze
 Dimensions – (Helical)-bevel gearboxes
Mounting kit for hollow shaft retention – Design proposal for auxiliary tools

Bevel gearbox GKR ÇÇ 5

Hollow shaft (design H) Mounting kit for hollow shaft retention Auxiliary tool Machine shaft
(auxiliary tool mounting) Disassembly
Gearbox slize l l1 d d2 l9 c7 c8 c9 max l8
H7
20 M6 4 6 95
04 120 106 40 3
25 M10 5 10 92

Helical-bevel gearbox GKS ÇÇ

Hollow shaft (design H) Mounting kit for hollow shaft retention Auxiliary tool Machine shaft
(auxiliary tool mounting) Disassembly
Gearbox size l l1 d d2 l9 c7 c8 c9 max l8
H7
25 M10 5
04 115 100 40 10 3 85
30 M10 6

30 M10 40 6 10
05 140 124 3 107
35 M12 50 7 12

40 8
06 160 140 M16 60 16 4 118
45 9

50 M16 60 10 16
07 200 175 5 148
55 M20 80 11 20

60 13
09 240 210 M20 80 20 5 182
70 14

70 14
11 290 250 M20 80 20 6 221
80 16

14 350 305 100 M24 100 20 24 8 270

Dimensions in [mm]

Lenze 5-119
 (Helical)-bevel gearboxes
Weights

Bevel gearbox GKR ÇÇ-2

Geared motors
Gearbox GKRÇÇ-2M HÇR with motor frame size
size 063 071 080
-1Ç -3Ç -1Ç -3Ç -1Ç -3Ç
04 8.4 9.0 11 11 15 16

Gearbox with mounting flange for IEC standard motors

Gearbox GKRÇÇ-2N HÇR with drive size
size
1A ÇB ÇC
04 7.8 8.4 12

Additional weights GKR ÇÇ

Gearbox 2n input Hollow shaft with Torque plate

Solid shaft Flange
size shaft end shrink disc Pitch circle
VÇÇ ÇÇK
VÇÇ SÇÇ
04 0.3 0.1 0.3 0.5 0.4

Helical-bevel gearbox GKS ÇÇ-3

Geared motors
Gearbox GKSÇÇ-3M HÇR with motor frame size
size 063 071 080 090 100 112 132 160 180 200 225
-1Ç -3Ç -1Ç -3Ç -1Ç -3Ç -1Ç -3Ç -12/-31 -32/41 -22/-31 -32/-41 -2Ç -3Ç -22 -32 -22 -32 -32 -12 -22

5 04 15 16 18 18 21 22 27 30

05 28 28 31 32 37 40 43 47

06 42 42 45 46 51 54 57 61 74 80

07 71 72 77 80 83 87 99 105 129 129 171 191

09 125 128 131 135 147 153 178 178 220 240 319 346 420

11 231 235 246 252 276 276 318 338 417 444 518 570 640

14 417 423 444 444 486 506 585 612 685 737 807

Gearbox with mounting flange for IEC motors Gearbox with free input shaft
Gearbox
GKSÇÇ-3N HÇR with drive size GKSÇÇ-3W HÇR with drive size
size
1A ÇB ÇC ÇD ÇE ÇF 1G 2G 1H 2H 3H 1K 2K 1A 1B 1C 1D 1E 1F 1G 1H 1K
04 15 16 18 21 13 14 16

05 25 28 31 33 24 25 27

06 39 42 45 48 49 39 42 45 53

07 68 71 73 75 98 95 106 102 67 71 79 84

09 119 122 123 147 144 155 159 151 175 118 127 133 148

11 221 222 245 242 253 257 249 273 280 226 231 246 261

14 413 410 421 425 417 440 447 399 414 428

Weights in [kg] with the oil filling for mounting position A, all indications as approx. values

5-120 Lenze
 (Helical)-bevel gearboxes
Weights

Helical-bevel gearbox GKS ÇÇ-4

Geared motors
Gearbox GKSÇÇ-4M HÇR with motor frame size
size 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç -3Ç -1Ç -3Ç -1Ç -3Ç -12/-31 -32/41 -22/-31 -32/-41 -2Ç -3Ç -22 -32
05 26 27 29 29 32 33 37 40

06 43 44 46 46 49 50 54 57

07 76 76 79 80 85 88 91 95

09 129 129 132 133 138 141 144 148 161 167

11 240 241 246 249 252 256 268 274 298 298

14 431 434 437 441 453 459 484 484 526 546

Gearbox with mounting flange for IEC motors Gearbox with free input shaft
Gearbox
GKSÇÇ-4N HÇR with drive size GKSÇÇ-4W HÇR with drive size
size
1A ÇB ÇC ÇD ÇE ÇF 1G 2G 1H 2H 3H 1A 1B 1C 1D 1E 1F 1G 1H
05 25 26 29 32 24 24 26

06 42 43 46 49 41 41 43

07 73 76 79 81 72 73 75

09 126 129 132 135 136 126 129 132 141

11 237 240 242 244 267 264 236 240 248 253

14 425 428 429 453 450 461 465 457 424 433 439 454

Additional weights
2nd input Hollow shaft with Torque plate Torque plate
Gearbox
size
Solid shaft
VÇÇ
shaft end shrink disc
Flange
ÇÇK
Housing foot Pitch circle 5
VÇÇ SÇÇ
04 0.6 0.2 0.6 2.5 1.3 0.9

05 1 0.3 0.8 4 2.2 1.3

06 2.5 0.8 1 7 3.7 2.1

07 5 1.5 1.5 11 6.6 3.7

09 8 2.7 3 16 13

11 16 6.3 5 24 23

14 33 12 11 33 44

Weights in [kg] with the oil filling for mounting position A, all indications as approx. values

Lenze 5-121
7
Motor options

Drive selection Dimensions

Motor connection Motor terminal box_______________________________ 7-15
Terminal box __________________________________ 7-2 Geared motor with internal fan ___________________ 7-16
Terminal assignment____________________________ 7-3 Geared motor with separate fan _________________ 7-17
Plug-in connector HAN _________________________ 7-4 Geared motor with hand wheel ___________________ 7-18
Plug-in connector ICN __________________________ 7-6 Geared motor with 2nd shaft end _________________ 7-19
Motor proctection Geared motor with protection cover ______________ 7-20
Thermal contacts ______________________________ 7-7 Geared motor with separate fan and
PTC thermistors ________________________________ 7-7 protection cover ________________________________ 7-21
Continuous thermistors _________________________ 7-7 Geared brake motor with manual release lever ____ 7-22
Separate fan ____________________________________ 7-8
Holding systems
Spring-operated brake __________________________ 7-9
Backstop _____________________________________ 7-11
Speed encoder
Pulse inhibit __________________________________ 7-12
Resolver _____________________________________ 7-12
Hand wheel ____________________________________ 7-13
Increased centrifugal mass _____________________ 7-14

Lenze 7-1
 Drive selection – Motor options
Motor connection

Position Name
1 Motor terminal board
2 Temperature sensor connection
3 Rectifier / clamp (24 V DC) for spring-operated brake
4 Terminal strip: Speed / position encoder connection

Motor terminal box KK1

Motor terminal box KK2

1 2

7 Motor terminal box KK3

1 2+4 1 2 4

3 3

7-2 Lenze
 Drive selection – Motor options
Motor connection

Terminal assignment
Clamp (pos. 3)

Meaning Name
Brake DC excited + 1
Brake DC excited - 2

Rectifier (pos. 3)

Meaning Name Addition

Bridge rectifier/half wave rectifier
Brake AC excited  Connection to L1 mains
Bridge rectifier
 Connection to N mains
Half wave rectifier
 Connection to L2 or L3 mains
+ Connection to brake
– Connection to brake

Terminal strip (pos. 4)

Meaning Addition Connection cross-section Name

1 Thermal contact (NC contact) TKO S1
2 Thermal contact (NC contact) TKO S2
1 PTC thermistor P1
2 PTC thermistor P2
1 KTY thermistor T1
2 KTY thermistor T2
3 Resolver Ref + 0.14 mm2 B1
4 Resolver Ref – 0.14 mm2 B2
5 B3
6 Resolver cos + 0.14 mm2 B4
7 Resolver cos – 0.14 mm2 B5
8 Resolver sin + 0.14 mm2 B6
9 Resolver sin – 0.14 mm2 B7
3 Increm. encoder supply + Supply 0.14 mm2 B1
4 Increm. encoder supply – GND (ground) 0.14 mm2 B2
5 Increm. encoder output channel A 0.14 mm2 B3
6 Increm. encoder output channel A– inverse 0.14 mm2 B4
7 Increm. encoder output channel B 0.14 mm2 B5
8 Increm. encoder output channel B– inverse 0.14 mm2 B6 7
9 Increm. encoder output channel C Zero track 0.14 mm2 B7
10 Increm. encoder output channel C– inverse 0.14 mm2 B8
11 Mass/sensor – 0.14 mm2 B9
12 Shield 0.14 mm2 B10
13 Sensor + 0.14 mm2 B11

Lenze 7-3
 Drive selection – Motor options
Motor connection

Plug-in connector HAN

General data

Design Plug-in connector to industry standard with quick lock.

Motor connection (Y/∆)
is determined in the mating connector (not part of delivery package).
Enclosure when locked IP 65
No. of contacts 10 + PE
Permissible rated current 16 A
Permissible rated voltage 500 V (AC)

Position Name
1 Motor connection housing HAN
2 Mating connector
(not part of delivery package)

Pin assignment

Motor connection housing

Temperature
sensor

Motor terminal
board
7
Brake…V (AC / DC)

Mating plug

connection connection

7-4 Lenze
 Drive selection – Motor options
Motor connection

Plug-in connector HAN

Motor frame size g5 g6

71 128 165
80 128 165
90 140 176
100 152 188
112 165 201
Dimensions in [mm]

Lenze 7-5
 Drive selection – Motor options
Motor connection

Plug-in connector ICN

General data

Design Plug-in connector to industry standard with screw connection.

The motor connection is determined in the terminal box and must be checked before
commissioning. (The mating plug is not included in the delivery package.)
Enclosure IP65
No. of contacts Power: 3 + PE Signal: 3 + PE
Permissible rated current 20 A 9A
Permissible rated voltage 630 V (AC)

Position Name
1 Plug-in connector
2 Motor terminal box

Mating plug is not included in the delivery package

Pin assignment

not labelled
Caution: Before motor commissioning, check the motor
connection (Y or ∆)!

Pin No. Connection Connection Recommended Motor frame size Recommended

Name lead colour connection
cross-section
1 Phase U brown
2 Protective earth conductor PE green-yellow
1.5 mm2
3 Phase W black
4 Phase V blue
071....112
A Temperature sensor Th white
B Temperature sensor Th white
0.75 mm2
C Brake Br blue
D Brake Br black

7-6 Lenze
 Drive selection – Motor options
Motor protection

The temperature sensors are integrated into the windings.

The use of an additional motor circuit breaker is recom-
mended for mains operation.

Thermal contacts

Tripping Reset Current loading Permissible

Motor type Function temperature temperature capacity voltage loading capacity
[°C] [°C] [A] [V] AC
All NC contact 150 ± 5 90-135 2.5 250

PTC thermistor

Tripping temperature Resistance at

Motor type Function 155 °C -20...+140° Standards
[°C] [Ω] [Ω]
DIN 44080
All Abrupt resistance change 150 ± 5 550 30...250
VDE 0660 Teil 303

Continuous temperature sensor KTY

Resistance at (see characteristic) Permissible current loading capacity at

Motor type Function 175 °C 150 °C 25 °C 175 °C 25 °C
[Ω] [Ω] [Ω] [mA] [mA]
Continuous
All resistance 2535 2225 1000 2.0 10
change

3000

2500
ResistanceininOhm
Ω

2000
Widerstand

1500

1000

500 7
0
-50 0 50 100 150 200
Temperature
Temperatur inin°C
°C

Lenze 7-7
 Drive selection – Motor options
Separate fan

Geared motors and geared brake motors can be equipped

with an axial separate fan. They are installed in an extended
motor fan cover with separate terminal box.

General data

Motor frame size

063...160 180...225
Design 1~ or 3~ 3~
Type of protection IP 55 IP 54
Thermal class F F
Control mode S1 S1

Rated data

Motor frame size Design Connection Vr fr Ir Pr Weight

[V] [ Hz ] [A] [W] m [kg]
63 1~ 210-240 50 / 60 0.12 19 1.6
3~ 360-420 0.07 19
71 1~ 210-240 50 / 60 0.12 19 1.6
3~ 360-420 0.07 19
80 1~ 210-240 50 / 60 0.32 46 2.3
3~ 360-420 0.16 41
90 1~ 210-240 50 / 60 0.22 50 3.1
3~ Y 360-530 0.08 31
3~ ∆ 210-305 0.14 31
100 1~ 210-240 50 / 60 0.16 30 3.5
3~ Y 360-530 0.08 34
3~ ∆ 210-305 0.14 34
112 1~ 210-240 50 / 60 0.30 80 3.9
3~ Y 360-530 0.14 61
3~ ∆ 210-305 0.24 61
132 1~ 210-240 50 / 60 0.55 125 5.3
3~ Y 360-530 0.26 132
3~ ∆ 210-305 0.45 132
160 1~ 210-240 50 / 60 0.71 160 6
3~ Y 360-530 0.40 218
3~ ∆ 210-305 0.70 218
7 180 3~ Y 220-240 50 / 60 1.10 530 7
3~ ∆ 380-415 0.65 530
200 3~ Y 220-240 50 / 60 1.50 590 10
3~ ∆ 380-415 0.87 590
225 3~ Y 220-240 50 / 60 1.90 780 12
3~ ∆ 380-415 1.10 780

7-8 Lenze
 ,Drive selection – Motor options
Holding systems

Spring-operated brakes
Brake motors are equipped with Lenze spring-operated The indicated brake torques are valid for quasi-static and
brakes. The rectifier required for mains operation is integra- low-wear operation of the brake used as holding brake.
ted in the terminal box. It is part of the delivery package. A The air gap is factory set and can be readjusted if wear
principle drawing of the brake is on page 7-10. occurs.
The brakes are fail safe (normally-on principle).

General data

Design Single-disc spring-operated brakes

Torque generation Brake torque is generated when no voltage is applied
Enclosure IP 54
Thermal class F
Friction surfaces asbestos-free
Option • Manual release (see notes on page 7-22)
• Low noise

Rated data

Size P20° MB JB m Connection voltage Assigned

[W] [Nm] [10-3 kgcm2] [kg] brake voltage
06 20 4 0.015 0.9
08 25 8 0.061 1.5
220...224 V DC t 24 V DC
10 30 16 0.20 2.6
220...240 V AC t 205 V DC
12 40 32 0.45 4.2
380...420 V AC t 180 V DC
14 50 60 0.63 5.8
16 55 80 1.5 8.7
18 85 150 2.9 12.6
20 100 260 7.3 19.5
25 110 400 20.0 31.0

Possible combinations

Brake 7
Size 06 08 10 12 14 16 18 20 25
Motor frame size
063 
071 
080  1)
090  3) 
100   2)
112   2)
132  
160-22  
160-32 
180  
200  
225 
1) With hand wheel or B-side shaft end only without adjuster nut.
2) With resolver or pulse encoder only without adjuster nut.
3) Low-noise design not possible.

Lenze 7-9
 Drive selection – Motor options
Holding systems

Spring-operated brake
Position Name
1 Stator
2 Armature plate
3 Hub
4 Rotor
5 Friction plate
6 Manual release (option)

Spring-operated brake
size d12 h5
06 13 109
7 08 13 118
10 13 134
12 13 164
14 24 196
16 24 240
18 24 347
20 24 418
25 24 504

7-10 Lenze
 Drive selection – Motor options
Holding systems

Backstop
Design Clamp, lifted by centrifugal force
Function principle Mechanically inhibited against direction of rotation during operation
Enclosure IP 55
Technical notes – Operation below lifting speed is only permitted for a short time
– Indicate in your order the direction of rotation of the motor shaft with view on the fan cover
– Motor start in inhibited direction not permitted!

Backstop
Motor frame size Inhibit torque Lifting speed
static clamp m
[Nm] [1/min] [kg]
063 24 900 0.7
071 24 900 0.7
080 72 900 1.9
090 156 700 2.4
100 156 700 2.4
112 156 700 2.4
132 300 850 2.9

7
Direction of rotation
GST GFL GKS GSS

Lenze 7-11
 Drive selection – Motor options
Speed / position encoder

Incremental encoder
Digital detection of the actual value, directly evaluable at
the 9300 servo. Zero pulse for reference when separating
the positions.

Type ITD 21 TTL ITD 21 HTL

Design Hollow shaft incremental encoder
Type of protection IP54
Voltage level TTL HTL
No. of pulses 2048 or 512 pulses/revolution
Tracks 2 tracks, 2 inverse tracks and zero pulse
Supply voltage 5 V DC ± 5% 8 ...30 V DC
Frequency limit 300 kHz 160 kHz
Temperature range -20... +70 °C

Resolver

Stator supplied resolver with 2 stator windings turned by

90° and a rotor winding with transformer winding.

Type TS 2651
Design Brush-less hollow-shaft resolver with bearing
Type of protection IP 54
Input voltage 10 V amplitude
Input frequency 4 kHz
Stator/rotor ratio 0.3 ± 5 %
Rotor impedance Zro 51 Ω + j90 Ω
Stator impedance Zs0 102 Ω + j150 Ω
Impedance Zrs 44 Ω + j76 Ω
Insulation resistance > 10 MΩ at 500 V DC
No. of pole pairs 1
7 Maximum phase error ± 10 angular minutes
Temperature range -10 ºC...+150 ºC

7-12 Lenze
 Drive selection – Motor options
Hand wheel

Design Light metal hand wheel, smooth surface

Function Manual operation:
• Emergency operation
• Setting-up operation of machines / systems
Technical note The increased mass inertia is to be observed for planning!
For repeated switching, especially for changes of the direction of rotation:
Please contact Lenze

Hand wheel
Motor frame size Diameter d Additional mass inertia
[mm] [10-3 kgm2] [kg]
071 160 1.6 0.6
080 160 1.6 0.6
090 160 1.6 0.6
100 160 1.6 0.6
112 160 1.6 0.6
132 250 13.9 1.8

Lenze 7-13
 Drive selection – Motor options
Increased inertia

Design Cast iron integral fan

Function principle Increased motor inertia for smooth start and stop
Technical note The increased motor inertia must be observed for planning!
For repeated switchings, especially for changes of direction of rotation:
Please contact Lenze

Motor frame size Additional inertia m

[10-3 kgm2] [kg]
071 1.8 0.9
080 2.4 1.4
090 5.5 1.9
100 7.7 2.5
112 15.3 3.8
132 35.6 6.0

7-14 Lenze
 Dimensions – Motor options
Motor terminal box

Motor frame size 063 071 080 090 100 112 132 160

Terminal box KK1 g1 105 130 130 141 154 167 202 215
m1 97 88 88 88 88 88 118 226
n2 97 96 96 92 92 98 131 127
x 32 26 27 32 30 39 43 36
y1 48.5 56 56 46 46 95 63.5
Cable Position 1 4x M12x1.5
glands Position 2 2x M16x1.5
1x M20x1.5
1x M50x1.5

1x M20x1.5 2x M16x1.5
Position 4 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M25x1.5 1x M20x1.5
1x M25x1.5 1x M50x1.5
Terminal box KK2 g1 105 131 131 140 151 169 204 215
m1 97 145 145 145 145 145 118 226
n2 97 98 98 97 97 98 131 127
x 32 18 18 24 21 31 43 36
y1 48.5 59 59 48,5 48,5 68 95 63.5
7
Cable Position 1 2x M12x1.5 1x M16x1.5 4x M12x1.5
glands Position 2 2x M16x1.5
1x M20x1.5
1x M50x1.5
Position 4 1x M20x1.5 1x M12x1.5 1x M12x1.5 1x M12x1.5 1x M12x1.5 1x M12x1.5 2x M16x1.5
1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 2x M25x1.5 1x M20x1.5
1x M25x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 1x M50x1.5
Terminal box KK3 g1 120 145 145 152 163 183 221 215
m1 200 200 200 200 200 200 200 226
n2 120 121 121 120 120 119 125 127
x 27 17 17 23 20 30 47 36
y1 60 72 72 60 60 83 100 63.5
Cable Position 1 4x M12x1.5 4x M12x1.5 4x M12x1.5 4x M12x1.5 4x M12x1.5 4x M12x1.5 4x M12x1.5 4x M12x1.5
glands Position 2 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 2x M16x1.5
2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 1x M20x1.5
1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M50x1.5
Position 4 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 1x M16x1.5 2x M16x1.5
2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 2x M20x1.5 1x M20x1.5
1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M25x1.5 1x M50x1.5

Dimensions in mm
Position of the cable glands refers to terminal box in position 5.

Lenze 7-15
 Dimensions – Motor options
Geared motor with integral fan

Motor frame size 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12 -31 -32 -41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 129 142 156 178 194 222 262 310
g1 KK1 104 130 130 141 154 167 202 215
KK2 104 131 131 140 151 169 204 215
KK3 120 145 145 152 163 183 221 215
k11) 193 204 176 225 242 280 280 310 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300

Attachments Motor
terminal ∆k
box
Fan KK1 0 0 0 0 0 0 0 0
Cast iron fan KK1 - 0 0 0 942) 0 0 -
Brake + fan KK2 56 66 68 74 94 101 127 113
Brake + cast iron fan KK2 - 66 68 74 94 101 127 -
Speed/pos. encoder
KK3 56 66 68 87 100 99 108 105
+ fan
Backstop + fan KK1 56 66 68 74 94 101 127 -
7
Backstop
KK1 - 66 68 74 94 101 127 -
+ cast iron fan
Dimensions in [mm]
1) Dimensions without options
2) Terminal box KK2

7-16 Lenze
 Dimensions – Motor options
Geared motor with separate fan

Motor fan size 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12 -31 -32 -41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Motor g 129 142 156 178 194 222 262 310
g1 KK1 104 130 130 141 154 167 202 215
KK2 104 131 131 140 151 169 204 215
KK3 120 145 145 152 163 183 221 215
g3 110 120 127 151 159 173 193 217
k11) 193 204 176 225 242 280 280 310 310 323 343 323 409 458 502
k2 100 145 145 180 180 222 265 300
k4 5 5 5 5 5 5 5 5
m2 70 70 70 85 85 85 85 85
n3 70 70 70 85 85 85 85 85
Cable glands Pos. 4 M16x1.5 M16x1.5 M16x1.5 M16x1.5 M16x1.5 M16x1.5 M16x1.5 M16x1.5

Attachments Motor ∆k
terminal
box
Separate fan KK1 71 80 94 101 97 95 104 113
Speed/pos. encoder KK3 71 134 94 101 97 183 218 225 7
+ separate fan
Brake + fan KK2 118 134 150 164 169 183 218 225
Brake + speed/ pos. KK3 118 134 150 164 169 183 218 225
encoder + separate fan
Backstop KK1 118 134 150 164 169 183 218 -
+ separate fan
Dimensions in [mm]
1) Dimensions without options
Postion of the cable glands refers to terminal box in position 5.

Lenze 7-17
 Dimensions – Motor options
Geared motor with hand wheel

Motor frame size 071 080 090 100 112 132

-1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12 -31 -32 -41 -22/-31 -32 -41 -2Ç/-3Ç
Motor g 142 156 178 194 222 262
k1 176 225 242 280 280 310 310 323 343 323 409
k2 145 145 180 180 222 265
k3 35 33 32 40 39 50
∆k 85 86 87 108 116 144
Hand wheel d8 160 160 160 160 160 250
c8 18 18 18 18 18 26
Dimensions in [mm]

7-18 Lenze
 Dimensions – Motor options
Geared motor with 2nd shaft end

Motor frame size 071 080 090 100 112 132

-1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12 -31 -32 -41 -22/-31 -32 -41 -2Ç/-3Ç
Motor g 142 156 178 194 222 262
k1 176 225 242 280 280 310 310 323 343 323 409
k2 145 145 180 180 222 265
k3 12 10 9 17 16 24
∆k 62 63 64 85 93 118 7
Shaft end c4 1.1 1.1 1.1 1.3 1.3 1.6
d4 14 h6 14 h6 14 h6 20 j6 20 j6 30 j6
d5 M5 M5 M5 M6 M6 M10
d71) 32 32 32 32 32 46
l4 - - - 17 17 24
l7 19 19 19 32.5 30.5 46
l8 3 4.5 5 10.5 7.6 12.5
u2 5 5 5 6 6 8
t2 3 3 3 3.5 3.5 4
Dimensions in [mm]
1) The opening of the fan cover must be protected against contact during operation.

Lenze 7-19
 Dimensions – Motor options
Geared motor with protection cover

Motor frame size 071 080 090 100 112 132 160
-1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12 -31 -32 -41 -22/-31 -32 -41 -2Ç/-3Ç -22 -22
Motor g3 142 156 178 194 222 262 310
k11) 176 225 242 280 280 310 310 323 343 323 409 458 502

Attachments ∆k

Fan 13 17 16 18 18 21 25
7 Cast iron fan 13 17 16 112 18 21 -
Brake + fan 79 85 90 112 119 148 138
Brake + cast iron fan 79 85 90 112 119 148 -
Speed/pos. encoder 79 85 103 118 117 129 130
+ fan
Backstop
79 85 90 112 119 148 -
+ fan
Backstop
79 85 90 112 119 148 -
+ cast iron fan
Dimensions in [mm]
1) Dimensions without options

7-20 Lenze
 Dimensions – Motor options
Geared motor with separate fan and protection cover

Motor frame size 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12 -31 -32 -41 -22/-31 -32 -41 -1Ç/-3Ç -22 -32
Motor g3 133 150 170 188 210 249 300 338
k11) 193 204 176 225 242 280 280 310 310 323 343 323 409 458 502

Attachments ∆k

Separate fan 121 130 144 156 147 150 159 173
Speed/pos. encoder + 7
Separate fan 168 184 144 156 147 238 273 285
Brake + separate fan 168 184 200 219 219 238 273 285
Brake + speed/
pos. encoder 168 184 200 219 219 238 273 285
+ separate fan
Backstop
+ separate fan 168 184 200 219 219 238 273 -
Dimensions in [mm]
1) Dimensions without options

Lenze 7-21
 Dimensions – Motor options
Geared brake motor with manual release lever

Motor frame size 063 071 080 090 100 112 132 160
-1Ç -3Ç -1Ç/-3Ç -1Ç/-3Ç -1Ç/-3Ç -12/-31 -32/-41 -22/-31 -32 -41 -2Ç/-3Ç -22 -32
Brake d12 h5 ∆k k5
size
06 13 109 23 169 181 170
08 13 118 21 212 224
10 13 134 21 235 268 298
12 13 164 29 270 300 303 323 303
14 24 196 31 307 327 307 393
16 24 240 42 396 420
18 24 347 55 423 467

Dimensions in [mm]
Caution: Manual release lever and motor terminal box KK2 in same position only possible with = motor frame size 080!
Manual release lever and motor terminal box KK3 in same position only possible with = motor frame size 100!

7-22 Lenze
 Fax orders
G""motion const

Fax order form

to Lenze subsidiary

Fax No.

Sender Customer No.

Company

Address Order No.

Name of the person placing the order

Department

Date Signature Telephone

Delivery address (if different from recipient’s address)

Address

Invoice address (if different from recipient)

Address

Delivery desired by

Delivery notes 8

Lenze 8-1
 Fax order form
Helical geared motors · Helical gearboxes

Customer No.

Order No.

Pcs. i= Price per item

1 M A R
Motor frame size / drive size

- 2 N V B K
GST
3 W C L

Further order information

Dimensions K L
Flange a2 = mm

Position of the system modules Terminal box

(use 0 for undefined positions) 0 2 3 4 5

A B C D E F
Mounting position

Colour 0 Finishing coat RAL 9018 0 Primary coat grey

Options
Special lubricant CLP-HC 320 CLP-H1 220

Special coat RAL

Output shaft bearing

Reinforced bearing

Shaft seals
Viton

Design N: Mounting flange

0 Clamp hub 0 Clamping ring hub

Ventilation 8
0 Vent element 0 Compensator for mounting position C
for sizes 05...07 for sizes 09...14


For order information on motor options see page 8-6

Lenze 8-3
 Fax order form
Low-profile geared motors · Low profile gearboxes

Customer No.

Order No.

Pcs. i= Price per item

A
M V Motor frame size / drive size
1 B R

- N H
GFL 2 K
C
W S
D

Further order information

Dimensions H S K
Hollow shaft mm Flange a2 = mm
dH7 =
Position of the system modules Shaft Foot Terminal box
(use 0 for undefined positions) 0 6 1 0 3 4 0 2 3 4 5

A B C D E F
Mounting positions

Colour 0 Finishing coat RAL 9018 0 Primary coat grey

Options
Special lubricant CLP-HC 320 CLP-H1 220

Special coat RAL

Viton
Shaft seal

Design N: Mounting flange

0 Clamp hub 0 Clamping ring hub

8
Accessories 0 Rubber buffer set for torque plate

0 Protection cover for shrink disc

0 Mounting kit for hollow shaft retention

0 Vent elements 0 Compensator for mounting position C

Vent for sizes 05...07 for sizes 09...14

For more order information on motor options see page 8-6



8-4 Lenze
 Fax order form
Bevel geared motors · Bevel gearboxes

Customer No.

Order No.

Pcs. i= Price per item

V
M Motor frame size / drive size
A R
H
GKR 04-2
N B K
S

Further order information

Dimensions H S K
Hollow shaft mm Flange a2 = mm
dH7 =
Position of the system modules Shaft Flange Terminal box
(use 0 for undefined positions) 0 3 5 3+5 0 3 5 3+5 0 2 3 4 5

A B C D E F
Mounting position

Colour Standard coats

Geared motor 0 Uncoated (aluminium housings) 0 Finishing coat RAL 9018 Primary coat grey

Gearbox with mounting flange Finishing coat RAL 9018 Primary coat grey

Options
Special lubricant CLP-HC 320 CLP-H1 220

Special coat RAL

Shaft seals Viton

8
Design N: mounting flange 0 Clamp hub 0 Clamping ring hub

Accessories 0 Rubber buffer set for torque plat

0 Torque plate pitch circle

0 2nd output shaft end

0 Protection cover for shrink disc

0 Mounting kit for hollow shaft retention

For more order information on motor options see page 8-6

Lenze 8-5
 Fax order form
Helical-bevel geared motors · Helical bevel gearboxes

Customer No.

Order No.

Pcs. i= Price per item

M V
3 A R Motor frame size / drive size

- N H
GKS 4 B K
W S

Further order information

Dimensions H S K
Hollow shaft mm Flange a2 = mm
dH7 =

Position of system components Shaft Flange Terminal box

(use 0 for undefined positions) 0 3 5 3+5 0 3 5 3+5 0 2 3 4 5

A B C D E F
Mounting position

Colour 0 Finishing coat RAL 9018 0 Primary coat grey

Options
Special lubricant CLP-HC 320 CLP-H1 220

Special coat RAL

Shaft seals
Viton

Design N: mounting flange

0 Clamp hub 0 Clamping ring hub

Accessories
0 Torque plate at housing foot

8
0 Torque plate pitch circle

0 2nd output shaft end

0 Protection cover for shrink disc

0 Hollow shaft protection cover – jet proof

0 Mounting kit for hollow shaft retention

Vent 0 Vent elements 0 Compensator for mounting position C

for sizes 05...07 for sizes 09...14

For order information on motor options see page Seite 8-6



8-6
 Fax order form
Helical-worm geared motors · Helical worm gearboxes

Customer No.

Order No.

Pcs. i= Price per items

M V
2 A R Motor frame size / drive size

- N H
GSS 3 B K
W S

Further order information

Dimensions H S K
Hollow shaft mm Flange a2 = mm
dH7 =
Position of the system components Shaft Flange Terminal box
(use 0 for undefined positions) 0 3 5 3+5 0 3 5 3+5 0 2 3 4 5

A B C D E F
Mounting position

Colour 0 Finishing coat RAL 9018 0 Primary coat grey

Options
Special lubricant CLP-HC 320 CLP-H1 220

Special coat RAL

Shaft seals
Viton

Design N: mounting flange

0 Clamp hub 0 Clamping ring hub

Accessories
0 Torque plate at housing foot

8
0 Torque plate pitch circle

0 2nd output shaft end

0 Protection cover for shrink disc

0 Hollow shaft protection cover - jet proof

0 Mounting kit for hollow shaft retention

Vent 0 Vent elements

for sizes 05...07

For order information on motor options see page 8-6



8-7
 Fax order form
Motor options
Customer No. Order No.

Combination Price per item

Option 1 Option 2 Option 3

Separate fan

Brake + Internal fan

Brake + Separate fan

Brake + Rotational mass

Brake + Internal fan + Hand wheel

Brake + Internal fan + 2nd shaft end

Brake + Speed/pos. encoder + Separate fan

Speed/pos. encoder + Internal fan

Speed/pos. encoder + Separate fan

Backstop + Internal fan

Backstop + Internal fan + Hand wheel

Backstop + Internal fan + 2nd shaft end

Backstop + Separate fan

Backstop + Rotational mass

Backstop + Rotational mass + Hand wheel

Backstop + Rotational mass + 2nd shaft end

Internal fan + Hand whee

Internal fan + 2nd shaft end

Rotational mass (Internal fan)

Rotational mass + Hand wheel (Internal fan)

Rotational mass + 2nd shaft end (Internal fan)

Separate fan 1~ 3~
Spring-operated brake

Brake size Connection voltage V (AC/DC)

2 3 4 5
Brake options Manual release with lever in position

Low-noise design

Backstop Direction of rotation CW Direction of rotation CCW

(when looking at the fan cover) (when looking at the fan cover)

Speed/position encoder Resolver

Incremental encoder HTL 512 pulses 2048 pulses

8 Incremental encoder TTL 512 pulses 2048 pulses

Motor protection PTC KTY

Motor connection Plug-in connector HAN

(Motor without additional options) 1 2 3 4 5
Plug-in connector ICN in position

More options Y / ∆ ;400 / 230 V (only for motor frame sizes 112-32 bis 132-32 in 87 Hz operation)

Condensate drain hole

Protection cover

CSA/UL

∑
8-8
 Lenze worldwide

Stammwerk Deutschland Werksniederlassung Mitte Werksniederlassung Süd

Lenze GmbH & Co KG Vertrieb Lenze GmbH & Co KG Vertrieb
Head office Germany Postfach 14 63 Fraunhoferstraße 16
35724 Herborn 82152 Martinsried
Lenze GmbH & Co KG Werksniederlassung Nord Westerwaldstraße 36 Postfach 11 26
Postfach 10 13 52 Lenze GmbH & Co KG Vertrieb 35745 Herborn 82141 Planegg
D-31763 Hameln Dornenpark 1 Telefon (0 27 72) 95 94-0 Telefon (0 89) 89 56 14-0
31840 Hessisch Oldendorf Telefax (0 27 72) 5 30 79 Telefax (0 89) 89 56 14 14
Telefon++49 (0)5154 / 82-0 Telefon (0 51 52) 90 36-0
Telefax ++49 (0)5154 / 82-28 00 Telefax (0 51 52) 90 36-33/44/55 Vertriebsbüros: Vertriebsbüros:
E-Mail: [email protected] Braunfels Allgäu
Vertriebsbüros: Telefon (0 64 42) 96 21 30 Telefon (0 83 64) 98 65 33
Lenze GmbH & Co KG Anlagenbau Barsbüttel Telefax (0 64 42) 96 21 31 Telefax (0 83 64) 98 65 35
Telefon (0 40) 67 56 11 00 Frankfurt
Buchenweg 1 Telefax (0 40) 67 56 11 01 Ansbach
D-31855 Aerzen Telefon (0 27 79) 9 10 20 Telefon (0 98 03) 9 40 11
Berlin Telefax (0 27 79) 9 10 22 Telefax (0 98 03) 9 40 12
Telefon ++49 (0)5154 / 82-0 Telefon (0 33 04) 3 11 23
Telefax ++49 (0)5154 / 82-21 00 Karlsruhe Augsburg
Telefax (0 33 04) 3 16 82 Telefon (0 72 46) 94 20 30 Telefon (0 90 73) 80 03 17
Lenze GmbH & Co KG Bremsen Bielefeld Telefax (0 72 46) 94 20 31 Telefax (0 90 73) 80 03 18
Telefon (05 21) 8 75 23 94 Kassel
Wülmser Weg 5 Telefax (05 21) 8 75 27 20 München
D-31855 Aerzen Telefon (0 56 65) 92 10 14 Telefon (0 89) 32 14 98 40
Bielefeld Telefax (0 56 65) 92 10 15 Telefax (0 89) 32 14 98 41
Telefon ++49 (0)5154 / 82-14 53 Telefon (05 21) 98 68 54
Telefax ++49 (0)5154 / 82-11 04 Koblenz München
Telefax (05 21) 98 68 55 Telefon (0 27 79) 9 10 61 Telefon (0 81 36) 89 36 73
Bremen Telefax (0 27 79) 9 10 63 Telefax (0 81 36) 89 36 75
Lenze GmbH & Co KG Kleinantriebe Telefon (04 21) 42 12 21
Hans-Lenze-Straße 1 Landau Oberfranken
Telefax (04 21) 42 12 51 Telefon (0 63 45) 91 90 30
D-32699 Extertal Telefon (0 91 26) 28 66 33
Hameln Telefax (0 63 45) 91 90 31 Telefax (0 91 26) 28 66 34
Telefon ++49 (0)5154 / 82-0 Telefon (0 51 54) 9 61 32
Telefax ++49 (0)5154 / 82-14 85 Zweibrücken Regensburg
Telefax (0 51 54) 9 65 40 Telefon (0 63 32) 46 07 81 Telefon (0 85 52) 92 11 02
Hannover Telefax (0 63 32) 46 07 82 Telefax (0 85 52) 92 11 06
Lenze GmbH & Co KG Service Telefon (0 51 02) 91 45 54
Breslauer Straße 3 Telefax (0 51 02) 91 45 55 Rosenheim
Kupplungen-Bremsen-Kleinantriebe: Telefon (0 80 51) 30 94 80
D-32699 Extertal Magdeburg Telefon (0 27 72) 57 12 33 Telefax (0 80 51) 30 94 81
Mechanical Drives Telefon (03 91) 6 31 33 73 Telefax (0 27 72) 57 12 73
Telefax (03 91) 6 31 63 61 Unterfranken
Telefon ++49 (0)5154 / 82-16 26 Telefon (0 93 67) 9 91 11
Telefax ++49 (0)5154 / 82-13 96 Norderstedt Verbindungstechnik: Telefax (0 93 67) 9 91 12
Electronic Drives Telefon (0 40) 52 68 21 23 Telefon (0 64 28) 44 13 73
Telefon ++49 (0)5154 / 82-11 11 Telefax (0 40) 52 68 21 25 Telefax (0 64 28) 44 13 74 Verbindungstechnik:
Telefax ++49 (0)5154 / 82-11 12 Oelde Telefon (0 89) 98 10 53 18
Telefon (0 25 29) 94 97 32 Telefax (0 89) 98 10 53 20
Service Helpline Telefax (0 25 29) 94 97 33 Werksniederlassung Südwest
++49 (0)180 5 20 24 26 Lenze GmbH & Co KG Vertrieb
Osnabrück Verbindungstechnik und Bremsen:
Telefon (0 54 61) 9 11 00 Postfach 14 33 Telefon (0 91 76) 99 86 81
Lenze Verbindungstechnik 71304 Waiblingen
Telefax (0 54 61) 9 11 01 Telefax (0 91 76) 99 86 82
GmbH & Co KG Schänzle 8
Ipf-Landesstraße 1 Verbindungstechnik: 71332 Waiblingen
A-4481 ASTEN Telefon (0 57 05) 91 21 70 Telefon (0 71 51) 9 59 81 - 0 Werksniederlassung Ost
Phone ++43 (0)7224 / 21 1-0 Telefax (0 57 05) 91 21 71 Telefax (0 71 51) 9 59 81 50
Lenze GmbH & Co KG Vertrieb
Telefax ++43 (0)7224 / 21 19 98 Telefon (0 41 61) 70 43 52 Grimmaische Straße 78
Vertriebsbüros:
Telefax (0 41 61) 70 43 91 04720 Döbeln
LS Automation GmbH & Co KG Esslingen Telefon (0 34 31) 66 06-0
Telefon (0 71 51) 9 59 81-17 Telefax (0 34 31) 66 06 66
Jakob-Stadler-Platz 11 Telefax (0 71 51) 9 59 81 50
D-78467 Konstanz Werksniederlassung West
Telefon ++49 (0)7531 / 9 42 19-0 Lenze GmbH & Co KG Vertrieb Freiburg Vertriebsbüros:
Telefax ++49 (0)7531 / 9 42 19 20 Postfach 10 12 20 Telefon (0 76 65) 91 20 44 Döbeln
47497 Neukirchen-Vluyn Telefax (0 76 65) 91 20 45 Telefon (0 34 31) 66 06 13
Kelvinstraße 7 Heilbronn Telefax (0 34 31) 66 06 66
47506 Neukirchen-Vluyn Telefon (0 70 62) 93 62 84
Telefon (0 28 45) 95 93-0 Sömmerda
Telefax (0 70 62) 93 62 85 Telefon (0 36 34) 60 18 09
Telefax (0 28 45) 95 93 93 Reutlingen Telefax (0 36 34) 60 18 60
Telefon (07 41) 9 30 12
Vertriebsbüros: Telefax (07 41) 9 30 13
Aachen/Düren Rottweil
Telefon (0 24 07) 95 18 62 Telefon (0 74 28) 9 10 76
Telefax (0 24 07) 95 18 63 Telefax (0 74 28) 9 10 77
Dortmund /Bochum /Märk. Kreis Singen
Telefon (0 23 89) 60 46 Telefon (0 77 31) 94 70 17
Telefax (0 23 89) 60 47 Telefax (0 77 31) 94 70 18
Düsseldorf / Krefeld / Heinsberg Südbaden
Telefon (0 28 45) 95 93-19 Telefon (07 41) 9 30 90
Telefax (0 28 45) 95 93 93 Telefax (07 41) 9 30 91
Essen / Mettmann
Telefon (0 28 45) 95 93-14
Telefax (0 28 45) 95 93 93
Kleve / Wesel / Viersen
Telefon (0 28 73) 91 90 44
Telefax (0 28 73) 91 90 45
Köln / Bonn / Rhein.-Berg.-Kreis
Telefon (0 22 43) 91 25 36
Telefax (0 22 43) 91 25 37
Recklinghausen / Borken / Coesfeld
8 Telefon (0 23 62) 9 80 11
Telefax (0 23 62) 9 80 12
Wuppertal / Ennepe-Ruhr-Kreis /
Oberberg.-Kreis
Telefon (0 23 39) 91 29 40
Telefax (0 23 39) 91 29 41

8-10 Lenze
 Lenze worldwide

weltweit DENMARK ISRAEL SLOVAC REPUBLIC

Leomotor A/S Greensphon Engineering Works LTD ECS Sluzby spol. s.r.o.
worldwide Ingenior- & Handelsfirma P.O.Box 10 108 Haifa-Bay 26110. Staromlynska 29
Stubmøllevej 35-37, Postb. 438 Phone ++972 (0)4 / 87 21 18 7 82106 BRATISLAVA
ARGENTINA 2450 KØBENHAVN SV Telefax ++972 (0)4 / 87 26 23 1 Phone ++421 (0)7 / 45 25 96 06
E.R.H.S.A. Phone ++45 / 36 30 66 66 Telefax ++421 (0)7 / 45 25 96 06
Girardot 1368 Telefax ++45 / 36 30 64 33 ITALY
1427 BUENOS AIRES Gerit Trasmissioni S.p.A. SLOVENIA
Büro Jylland:
Phone ++54 (0)11 / 45 54 32 32 Leomotor A/S Viale Monza 338 Lenze pogonska tehnika GmbH
Telefax ++54 (0)11 / 45 52 36 11 Enebærvej 11 20128 MILANO Podruznica Ljubljana
8653 THEM Phone ++39 (0)02 / 27 09 81 C.A. Bitenca 68
AUSTRALIA Phone ++45 / 86 84 75 33 Telefax ++39 (0)02 / 27 09 82 92 1000 LJUBLJANA
FCR Motion Technology Pty. Ltd. Telefax ++45 / 86 84 83 53 Phone ++386 61 / 15 026 15
Automation Place JAPAN Telefax ++386 61 / 15 026 10
23 McArthur's Road EGYPT Miki Pulley Co., Ltd.
P.O. Box 359 1-39-7 Komatsubara, Zama-city SOUTH AFRICA
AL-FARID
Altona North Mohamed Farid Hassanen & Co KANAGAWA 228-8577 S.A. Power Services (Pty.) Ltd.
3025 MELBOURNE 1349 Kornish El Nile Phone ++81 (0)462 / 58 16 61 P.O. Box 11 37
Phone ++61 (0)3 / 93 99 15 11 CAIRO - EL SAHEL Telefax ++81 (0)462 / 58 17 04 RANDBURG 2125
Telefax ++61 (0)3 / 93 99 14 31 Phone ++20 (0)2 / 20 56 26-7/8/9/0 Phone ++27 (0)11 / 78 71 80 1
Telefax ++20 (0)2 / 20 56 27 1 LUXEMBOURG Telefax ++27 (0)11 / 78 75 04 0
AUSTRIA see BELGIUM
Lenze Antriebstechnik GmbH ESTLAND SOUTH KOREA
Ipf-Landesstraße 1 see FINLAND MACEDONIA see CHINA
4481 ASTEN Lenze Antriebstechnik GmbH
Phone ++43 (0)7224 / 21 0-0 FINLAND Pretstavnistvo Skopje SPAIN
Telefax ++43 (0)7224 / 21 09 99 Nikola Rusinski str. III/A/2 Lenze Transmisiones, S.A.
Refimex Oy
PL 130, Olarinluoma 12 91000 SKOPJE Mila i Fontanals, 135-139
Büro Vorarlberg: Phone ++389 (0)91 / 39 00 90 08205 SABADELL (Barcelona)
Wiesenweg 1 02201 ESPOO
Phone ++358 (0)9 / 88 66 47 00 Telefax ++389 (0)91 / 39 00 91 Phone ++34 93 / 72 07 68 0
6960 WOLFURT Telefax ++34 93 / 71 22 54 1
Phone ++43 (0)5574 / 67 89-0 Telefax ++358 (0)9 / 88 66 47 99
MALAYSIA
Telefax ++43 (0)5574 / 67 89 66 D.S.C. ENGINEERING SDN BHD SWEDEN
FRANCE
Lenze S.A. 40M, Jalan SS21/58 Lenze Transmissioner AB
Büro Wien: Damansara Utama
Triester Straße 14/109 Z.A. de Chanteloup Box 10 74, 58110 LINKÖPING
Rue Albert Einstein 47400 Petaling Jaya Phone ++46 (0)13 / 35 58 00
2351 WR. NEUDORF SELANGOR D.E.
Phone ++43 (0)2236 / 2 53 33-0 93603 AULNAY S/S BOIS CEDEX Telefax ++46 (0)13 / 10 36 23
Phone ++33 (0)1 / 48 79 62 00 Phone ++60 (0)3 / 77 25 62 43
Telefax ++43 (0)2236 / 2 53 33-66 77 25 62 46
Telefax ++33 (0)1 / 48 69 40 99 SWITZERLAND
Telefax ++60 (0)3 / 77 29 50 31 Lenze Bachofen AG
Lenze Verbindungstechnik Succ. Rhône-Alpes:
GmbH & Co KG Ackerstraße 42, Postfach
42, Chemin des Pivolles MEXICO 8610 USTER-ZÜRICH
Ipf-Landesstraße 1 69150 DÉCINES-CHARPIEU
4481 ASTEN see USA Phone ++41 (0)1 / 94 41 21 2
Phone ++33 (0)4 / 72 15 40 20 Telefax ++41 (0)1 / 94 41 23 3
Phone ++43 (0)7224 / 21 1-0 Telefax ++33 (0)4 / 78 26 88 36
Telefax ++43 (0)7224 / 21 19 98 NETHERLANDS
Vente Suisse Romande:
Agence Sud-Ouest: Lenze B.V., Postbus 31 01 Route de Prilly 25
BELGIUM 14, rue Capus 5203 DC``S-HERTOGENBOSCH 1023 CRISSIER
Lenze b.v.b.a 31400 TOULOUSE Ploegweg 15 Phone ++41 (0)21 / 63 72 19 0
Noorderlaan 133 Phone ++33 (0)5 / 61 14 85 37 5232 BR`S-HERTOGENBOSCH Telefax ++41 (0)21 / 63 72 19 9
bus 15 Telefax ++33 (0)5 / 61 14 85 38 Phone ++31 (0)73 / 64 56 50 0
2030 ANTWERPEN Telefax ++31 (0)73 / 64 56 51 0 TAIWAN
Agence Est:
Phone ++32 (0)3 / 54 26 20 0 24, rue des Roses ACE Pillar Trading Co. Ltd.
Telefax ++32 (0)3 / 54 13 75 4 NEW ZEALAND
67870 GRIESHEIM-PRÈS-MOLSHEIM No.12, Lane 61, Sec. 1,
Phone ++33 (0)3 / 88 38 09 20 Tranz Corporation Kuanfu Road, San-Chung City
BOSNIA-HERZOGOVINA Telefax ++33 (0)3 / 88 38 17 24 112 Mays Road, Onehunga TAIPEI HSIEN
see AUSTRIA P.O. Box 12-320, Penrose Phone ++886 (0)2 / 299 58 40 0
GREECE AUCKLAND Telefax ++886 (0)2 / 299 53 46 6
BRAZIL Phone ++64 (0)9 / 63 45 51 1
George P. Alexandris S.A. Telefax ++64 (0)9 / 63 45 51 8
C.D.P. Comp. Imp. Ltda. 12K. Mavromichali Str. THAILAND
Al. Tibirica, 1130 – Vila Ipanema 185 45 PIRAEUS NORWAY Weinmann & Schneider Co., Ltd.
MAIRIPORA – SP – 07600-000 Phone ++30 (0)1 / 41 11 84 15 429 Moo 7
Phone ++55 (0)11 / 4 30-31 94 Telefax ++30 (0)1 / 4 11 81 71 Dtc- Lenze as Theparak Road
Telefax ++55 (0)11 / 4 30-26 07 4 12 70 58 Stallbakken 5 Tambol Theparak
2005 RAELINGEN Amphur Muang
BULGARIA 183 Monastiriou Str. Phone ++47 / 64 80 25 10
546 27 THESSALONIKI SAMUTPRAKARN 10270
Telefax ++47 / 64 80 25 11 Phone ++66 (0)2 / 38 35 13 4
see MACEDONIA Phone ++30 (0)31 / 5 56 65 04
Telefax ++30 (0)31 / 51 18 15 38 35 63 36
PHILIPPINES 38 36 60 68
CANADA
Jupp & Company Inc. 38 36 57 6
see USA HUNGARY Unit 2111, Cityland 10, Tower II Telefax ++66 (0)2 / 38 35 63 7
Lenze Antriebstechnik 6817 Ayala Ave. Cor. H. V.
CHILE Handelsgesellschaft mbH De La Costa St. TURKEY
Sargent S.A. 2040 BUDAÖRS MAKATI, METRO MANILA
Tecnica Thomas C. Sargent Gyár utca 2. LSE Elektrik Elektronik Makine
Phone ++63 (0)2 / 89 43 89 8 Otomasyon Mühendislik
S.A.C.é.l., Postfach 322. 89 21 50 6 San. ve Tic. Ltd. Sti.
Casilla 166-D Phone ++36 (0)23 / 501-320 Telefax ++63 (0)2 / 89 32 07 4 Gülsuyu mah. Zuhal Cad.
SANTIAGO DE CHILE Telefax ++36 (0)23 / 501-339 Fil Yokusu No:8
Phone ++56 (0)2 / 69 91 52 5 POLAND 81530 MALTEPE/ISTANBUL
Telefax ++56 (0)2 / 69 83 98 9 ICELAND Lenze-Rotiw Sp. z o.o. Phone ++90 (0)216 / 441 00 43
see DENMARK ul. Ro˝dzieƒskiego 188b 441 61 04
Aupi Ltda. 40-203 KATOWICE 459 67 26
Automation y Proceso Industrial INDIA Phone ++48 (0)32 / 2 03 97 73 459 66 18
Camino a Melipilla No. 262, Casilla 80 Telefax ++48 (0)32 / 7 81 01 80 Telefax ++90 (0)216 / 399 41 26
SANTIAGO DE CHILE Emco Lenze Pvt. Ltd.
Phone ++56 (0)2 / 81 11 80 4 106 Sion Koliwada Road, Sion (East) Lenze Systemy Automatyki Sp. z o.o.
MUMBAI 400 022 UNITED KINGDOM/EIRE
Telefax ++56 (0)2 / 81 11 10 2 Ul. Kociewska 30 A Lenze Ltd.
Phone ++91 (0)22 / 40 71 81 6 87-100 TORU¡
40 76 37 1 Caxton Road
CHINA Phone ++48 (0)56 / 6 55 94 93 BEDFORD MK 41 OHT
40 76 43 2 6 55 94 94
Lenze GmbH & Co KG 40 77 45 3 Phone ++44 (0)1234 / 32 12 00
Beijing Representative Office 6 55 94 95 Telefax ++44 (0)1234 / 26 18 15
Rm. 401, Huaxin Mansion
No. 33, An Ding Road
Telefax ++91 (0)22 / 40 90 42 3 6 58 40 00
6 58 40 10 USA
8
INDONESIA Telefax ++48 (0)56 / 6 55 94 69
Chaoyang District Lenze Corp.
BEIJING 100029 P.T. Futurindo Globalsatya
Jl.: Prof. Dr. Latumenten No. 18 PORTUGAL 175 Route 46 West
Phone ++86-10-6441 1470 FAIRFIELD NJ 07004
Telefax ++86-10-6441 1467 Kompleks Perkantoran Costa Leal el Victor
Kota Grogol Permai Blok A 35 Phone ++1 973 / 227-5311
Electronica-Pneumatica, Lda. Telefax ++1 973 / 227-7423
CROATIA JAKARTA 11460 Rua Prof. Augusto Lessa, 269,
Buero 1: Apart. 52053 Lenze Corp.
see AUSTRIA Phone ++62 (0)21 / 766 42 34 4202-801 PORTO 1730 East Logan Avenue
765 86 23 Phone ++351 (0)22 / 5 50 85 20 EMPORIA KS 66 801
CZECH REPUBLIC Telefax ++62 (0)21 / 766 44 20 Telefax ++351 (0)22 / 5 02 40 05 Phone ++1 316 / 34 38 40 1
Lenze Antriebstechnik GmbH Buero 2: Telefax ++1 316 / 34 22 59 5
informaãní a poradenské stfiedisko Phone ++62 (0)21 / 567 96 31 ROMANIA
17. listopadu 510 567 96 32 Lenze Corp.
549 41 âERVEN¯ KOSTELEC Telefax ++62 (0)21 / 566 87 50 see AUSTRIA 300 Petty Road
Phone ++420 (0)441 / 467-111 Suite E
Telefax ++420 (0)441 / 467-166 IRAN RUSSIA LAWRENCEVILLE, GA 30043
Tavan Ressan Co., Inteldrive Phone ++1 770 / 962-3696
P.O. Box 19395-5177 1 Buhvostova Street 12/11 Telefax ++1 770 / 962-2983
Ayatollah-Sadr Exp.Way, Korpus 18 Office 322
South Dastour Ave., Habibi Str. No. 44 MOSCOW 107258 YUGOSLAVIA
TEHRAN 19396 Phone ++7 (0)095 / 963 96 86 see MACEDONIA
Phone ++98 (0)21 / 26 67 66 Telefax ++7 (0)095 / 962 67 94
26 26 55
26 92 99 SINGAPORE
Telefax ++98 (0)21 / 20 02 88 3 see MALAYSIA

Lenze 8-11