Plastiment® - R2000

Product Data Sheet
Edition 12, 2015

Version no. 02.13
Plastiment® -R2000
Water Reducing and Retarding Concrete Admixture
Product A Liquid set retarding concrete admixture with a plasticizing effect. Substantial
water reduction and improved waterproofing capability can be achieved without loss
Description of workability.
It complies with ASTM C 494 Type A+B+D and BS 5075 Part I.

®
Uses Plastiment -R2000 is recommended for:
 Workability especially where difficult placing conditions are encountered and to
obtain dense concrete.
 A set retarding agent to maintain workability and extend the time allowed for
pouring and compacting, particularly in hot weather. e.g. ready-mix concrete,
pumped concrete, slip-forming concreting etc.
 Decreases the concrete permeability.
®
Advantages Plastiment -R2000 provides the following properties:
 Increased setting times at elevated temperatures.
 Long lasting control of slump loss.
 Improved workability without increased water content.
 Reduced water without loss of workability.
 Increased strengths.
 Reduced shrinkage and creep.
 Improved surface finish.
 Improved water tightness
 Chloride free-does not attack reinforcement.
Technical Data
Base Modified Lignosulphonate
Appearance / Colour Brown Liquid
Density (at 20°C) 1.160 (ASTM C-494)
Packaging 5 and 20 kg pails
220 kg drums
Bulk Tanks packing available upon request
Storage Conditions Store in dry conditions, protected from direct sunlight and frost.
Shelf Life 12 months from date of production if stored properly in undamaged and unopened
original sealed packing.
Application
Dosage 0.2 - 0.8 % by weight of cement. Above 0.5% preliminary tests are necessary.
Exact dosage rate required is dependant on effect sought, quality of cement &
aggregates, water : cement ratio and ambient temperature. Therefore, in many
cases it is advisable to carry out trial mixes.
Plastiment® -R2000 1/2

®
Dispensing Plastiment -R2000 is added to the mixing water or directly to the batch
simultaneously with the mixing water prior to its addition to the aggregates.
Automatic and accurate dispensing equipment is available from Sika.

®
Important Notes Plastiment -R2000 is compatible with all types of Portland Cement including
S.R.C.
When accidental overdosing occurs, this will have the effect of extending the setting
time. During this period the concrete must be kept moist in order to prevent
premature drying out..
Safety Instructions
Safety Precautions Accidental splashes to the skin must be washed off with water and soap.
Accidental splashes to the eyes or mucous membrane must be rinsed with clean
warm water. Seek medical attention without delay.
Ecology Residues of material must be removed according to local regulations.
Fully cured material can be disposed of as household waste under agreement with
the responsible local authorities.
Transport Non-hazardous
Toxicity Non-Toxic under the relevant health and safety codes.
Legal notes The information, and in particular, the recommendations relating to the application and end-use of
Sika products, are given in good faith based on Sika's current knowledge and experience of the products
when properly stored, handled and applied under normal conditions in accordance with
Sika’s recommendations. In practice, the differences in materials, substrates and actual site conditions are
such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability
arising out of any legal relationship whatsoever, can be inferred either from this information, or from any
written recommendations, or from any other advice offered. The user of the product must test the product’s
suitability for the intended application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which will be supplied on request.
Sika Egypt for Construction Chemicals

El Abour City Tel :+202- 44810580 - 90
st
1 industrial zone (A) Fax :+202- 44810459
Section # 10 Block 13035, Mob :+20122- 3908822/55
Egypt www.sika.com.eg
Plastiment® -R2000 2/2

Plastiment® - R2000

Uploaded by

Copyright:

Available Formats

Plastiment® - R2000

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Plastiment® - R2000

Uploaded by

Copyright:

Available Formats

Product Data Sheet

Edition 12, 2015

It complies with ASTM C 494 Type A+B+D and BS 5075 Part I.

Plastiment® -R2000 1/2

Automatic and accurate dispensing equipment is available from Sika.

Sika Egypt for Construction Chemicals

Plastiment® -R2000 2/2

You might also like