Network Analysis and Synthesis Worksheet and Assignments
Network Analysis and Synthesis Worksheet and Assignments
16) Define reciprocal and symmetrical networks? Give the appropriate condition for reciprocity
and symmetry in terms of h and ABCD parameters. A two port is described by
18) For the two port network , let A = 4, B = 30Ω, C = 0.1S, and D = 1.5 calculate the input
impedance , when
21) Find Z, Y, h, and ABCD parameters of the two port network Figures shown below.
22) For the following network assuming zero initial conditions find Vo(t) for unit step input
voltage using thevenin’s theorem. Use transformed techniques.
23) A circuit is known to have its transfer function as ( ) find the output y (t)
initial conditions
25) For the pole-zero plots shown on the figure, find the residues of the poles.
1
26) State whether the following polynomials are Hurwitz or not.
i).
ii).
iii).
iv).
v).
vi).
27) Find Z, Y, h, and ABCD parameters of the two port network shown below (8 pts.).
28) Answer the following
Test whether a). p(s) = is Hurwitz or not.
b). p(s) = is Hurwitz or not.
c). Find the range of ‘K’ sothat the polynomial p(s) = is Hurwitz
29) Test whether the following functions are positive real or not.
a. ( ) b. ( ) ( )( )
31) Categorize the following immittance functions as L-C, R-C, R-L DP functions (impedance
or admittance) and give appropriate justification with respect to the property of each category
( )( ) ( )( )
a) ( ) b). F(s) =
( ) ( )( )
( )( ) ( )( )
c). ( ) d). ( )
( )( ) ( )
32) An impedance function has the pole-zero patterns shown in the figure. If Y(-1) = 2,
Synthesize the impedance in Foster II form and Cauer II form.
33) Categorize the following immittance functions as L-C, R-C or R-L DP functions (impedance
or admittance) and Synthesize using Foster (I & II) and Cauer (I&II) forms (15 pts.)
( )( ) ( )( )
a) F(s) = b). F(s) =
( )( ) ( )