Datasheet - EAP610-Outdoor V1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Business Cloud SDN Solution

Omada EAP - Business Wi-Fi Series

Omada SDN Controller

EAP610-Outdoor
EAP Product List
Outdoor 802.11n/ac/ax AP

Picture

Model EAP610-Outdoor
Product AX1800 Indoor/Outdoor Wi-Fi 6 Access Point
2.4 GHz: 574 Mbps
Speed
5 GHz: 1201 Mbps
Ethernet Port 1x Gigabit Ethernet Port
802.3at PoE /
Power Supply
48V Passive PoE
2 Internal Dual-Band Omni Antennas
Internal Antennas
2.4 GHz: 4 dBi; 5 GHz: 5 dBi
Specifications
Outdoor 802.11ax AP
Model EAP610-Outdoor

Name AX1800 Indoor/Outdoor Wi-Fi 6 Access Point


LAN Interfaces 1x Gigabit Ethernet Port
Wi-Fi Standards IEEE 802.11a/b/g/n/ac/ax
Maximum Data Rate 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz)
Main Design Wireless Client Capacity 250+
2 Internal Dual-Band Omni Antennas
Antennas
2.4 GHz: 4 dBi; 5 GHz: 5 dBi
Transmit Power CE: < 20 dBm (2.4 GHz, EIRP), < 30 dBm (5 GHz, EIRP); FCC: < 25 dBm (2.4 GHz), < 25 dBm (5 GHz)
Omada Software Controller •
Centralized Management Omada Hardware Controller •
Omada APP •
Captive Portal Authentication •
Access Control •
Maximum number of MAC Filter 4000
Wireless Isolation between

Security Clients
VLAN •
Rogue AP Detection •
Wireless Encryption WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
802.1X Support •
Multiple SSIDs 16 (8 for each band)
Enable/Disable Wireless Radio •
Enable/Disable SSID Broadcast •
Guest Network •
Automatic Channel Assignment •
Transmit Power Control Adjust transmit Power on dBm
QoS (WMM) •
Seamless Roaming •
Mesh •
Beamforming •
Wireless Function MU-MIMO •
Rate Limit Based on SSID/Client
Load Balance •
Airtime Fairness •
Band Steering •
RADIUS Accounting •
MAC Authentication •
Reboot Schedule •
Wireless Schedule •
Wireless Statistics •
Static IP/Dynamic IP •
802.11ax 8 Mbps to 1201 Mbps (MCS0-MCS11, NSS = 1 to 2 HE20/40/80)
802.11ac 6.5 Mbps to 1083.3 Mbps (MCS0-MCS9, NSS = 1 to 2 VHT20/40/80)
802.11n 6.5 Mbps to 300 Mbps (MCS0-MCS15, HT20/40)
Support Data Rates
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Outdoor 802.11ax AP
Model EAP610-Outdoor

LED ON/OFF Control •


Management MAC Access

Control
Web-based Management •
SNMP v1, v2c, v3

Management SSH •
Restore & Backup •
Firmware update via Web •
NTP •
System Log •
Email Alerts •
Power Supply 802.3at PoE or 48V Passive PoE (PoE Adapter Included)
EU: 12.5W (802.3at PoE or Passive PoE)
Maximum Power Consumption
Physical & Environment US: 14.7W (802.3at PoE or Passive PoE)
Reset •
Mounting Pole/Wall mouting (Kits included)
Certifications CE, FCC, RoHS
Dimensions (W x D x H) 280.4 × 106.5 × 56.8 mm
Operating Temperature: -30 °C–70 °C (-22 °F–158 °F);
Others
Storage Temperature: -40 °C–70 °C (-40 °F–158 °F);
Environment
Operating Humidity: 10%–90% non-condensing;
Storage Humidity: 5%–90% non-condensing;
Antenna Radiation Patterns
Outdoor AP
EAP610-Outdoor

Elevation-0° Elevation-90° Azimuth Mapped 3D

2.45 GHz

5.25 GHz

5.5 GHz

5.75 GHz
Disclaimers
Wireless Speed and Range Disclaimer
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications.
Range and coverage specifications were defined according to test results under normal usage conditions.
Actual wireless transmission rate and wireless coverageare not guaranteed, and will vary as a result of 1)
environmental factors, including building materials, physical objects and obstacles, 2) network conditions,
including local interference, volume and density of traffic, product location, network complexity, and network
overhead and 3) client limitations, including rated performance, location, connection quality, and client
condition.

Wireless Client Capacity Disclaimer


Wireless client capacity specifications were defined according to test results under normal usage conditions.
Actual wireless client capacity is not guaranteed, and will vary as a result of 1) environmental factors, including
building materials, physical objects and obstacles, 2) network conditions, including local interference, volume
and density of traffic, product location, network complexity, and network overhead and 3) client limitations,
including rated performance, location, connection quality, and client condition.

Ethernet Port Limitation Disclaimer


Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported
by the network cable, Internet service provider factors and other environmental conditions.

MU-MIMO Disclaimer
(Only for certain devices)
MU-MIMO capability requires client devices that also support MU-MIMO.

Seamless Roaming Disclaimer


(Only for certain devices)
Seamless roaming requires both the access point and client devices to support 802.11k and 802.11v
protocols.

Lightning and Electro-Static Discharge Protection Disclaimer


(Only for outdoor devices)
Protection against lightning and electro-static discharge may be achieved through proper product setup,
grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with
setting up this product.

PoE Disclaimer
PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will
vary as a result of client limitations and environmental factors.

Some models featured in this guide may be unavailable in your country or region. Visit TP-Link website for local sales
information: www.tp-link.com. Specifications are subject to change without notice.
© 2023 TP-Link

You might also like