ATT00022
ATT00022
ATT00022
com
www.haepl.com
Ref: MKT/807_2/1819
Date: -04.03.2019
To,
Subject: Mist Sprayer system for Coal Crusher Conveyor Unit- 15 TPH
Dear Sir,
This has reference to the survey and visit our Mr. Souradeep Dutta (Engineer- Marketing) had with
you regarding the Mist Spray System for above mentioned site.
As per the survey and details provided from your end, we are enclosing herewith our technical
proposal along with budgetary offer for Dust Suppression System.
Hope this will be inline to your requirement. Should you need any further discussion on the above
please revert back to us.
Thanking you & assuring you of our best services at all times.
Mitali Das
Engineer Design
Contents
System Proposal
Design Consideration
Technical specification
Cost Summary
Quotation
Providing Survey, Designing, Laying, Jointing, Testing and Commissioning of HDPE Pipes with
mist spray nozzle and required accessories along with mechanical Work for Dust Suppression
System for Coal crusher unit – 15 TPH (3 no’s of conveyor belt). The system consists of high
pressure fine spray nozzles will obstruct the dust particles from escaping out of the conveyer. Both
the proposed system will be operated through one proposed pump. Two Fine Spray Nozzles are
used for each conveyor belt.
Design consideration:
We have considered the existing reservoir/pond as a source of water for the system and we
are proposing one tank of capacity 1,000 liters for 1 hr. operation. Feeding of water from the
water source to the proposed tank is in our end.
As per the details (provided from your end), we have considered max. elevation is 20 m (for
coal crusher) .
The operation time has to be decided on the site depending on the dust particle size,
accumulation and overall site condition. We will provide one manual valve to operate the
system effectively.
We have proposed 50 mm HDPE Pipe as mainline and 1620 Multilayer ductile polymer
pipes are proposed to connect Fine Spray nozzles. Proposed pipeline will be laid over
ground from pump to the conveyor belt where dust suppression is required. Multi-layer
ductile polymer pipes will be laid over ground to connect the fine sprayer nozzles.
The entire fine spray system will be operated with the help of manually operated Valves.
Pipeline Details
HDPE pipes 50mm HDPE pipe
Installation Underground / over ground
Multi-Layer ductile 1620 Multi-layer ductile polymer pipe
polymer Pipe Line
Nozzle Details
Nozzle Specification Fine Spray Nozzle
Operating Pressure 6.5 to 7 Kg/cm2
Discharge of Fine Spray Nozzle 1.5 LPM
No. of Fine Spray Nozzle 6 Nos.
Ref: MKT/807_2/1819
Date: -04.03.2019
Ensure that all the Valves of each mist spray nozzles are open.
Ensure water in the Reservoir/Water Tank is full before switching “ON” the Pump.
Please ensure that delivery valve of the pump is closed.
Switch ON the pump & open the delivery valve gradually after 30 seconds.
Ensure small amount of water flow at pressure release valve for safety of system.
The time of operation for the system should be as mentioned in the above Operating
Procedure Table.
After completion of operation please ensure delivery valve is closed before switching OFF
the pump.
Note:
It is recommended to follow the above steps to avoid Damage / Destruction of the system.
PRICE BREAK UP
Ref: MKT/807_2/1819
Date: -04.03.2019
Annexure “A
Client: M/s Suraj Products Limited.
Site: Barpali ,Sundargarh, Odisha
PRICE BREAK UP
Quotation for Dust Suppression System under HSN Code 84248990
Ref: MKT/807_2/1819
Date: -04.03.2019
PRICE BREAK UP
A. Commercial
Quoted amount is Ex-Works Raipur(CG) Materials of Annexure “A” will be despatched from Raipur.
Quoted amount is Ex-Works Kolkata(WB) Materials of Annexure “B” will be despatched from
Kolkata.
Payment terms: Supply: 30% advance along with Order, 70% balance against Proforma Invoice
before Dispatch. Amount payable in the name of “HALLMARK AQUAEQUIPMENT PVT. LTD.”
Price validity: 30 days from the date of quotation.
Delivery period: 2 weeks’ time will be required to supply materials after receipt of confirmed Order
along with advance payment.
Ref: MKT/807_2/18
Date: -04.03.2019
PRICE BREAKUP
Quotation for Installation under HSN Code 995468
Payment Terms: Installation: 100% within 7 days from the date of successful completion of job.
Amount payable in the name of “HALLMARK AQUAEQUIPMENT PVT. LTD.”
Installation:
We shall take 7-8 days’ time to complete installation after receipt of material as site, provide all
other requisite infrastructure is ready.