Scribd
Upload
12 views6 pages

1.4 For Mac and Ubuntu Building A Developed Environment

Uploaded by

yash.gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views6 pages

1.4 For Mac and Ubuntu Building A Developed Environment

Uploaded by

yash.gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Part 1

Arduino IDE
As an open source software, Arduino IDE, based on going Processing IDE development is an integrated
development environment officially launched by Arduino.

By using arduino IDE, you just write the program code in the IDE and upload it to the Arduino
circuit board. The program will tell the Arduino circuit board what to do.

So, Where can we download Arduino IDE?


Uplaod program for MacOS
STEP 1:
Download the Arduino Software (IDE) Open the URL:https://www.arduino.cc/en/Main/Software
with browser.
Click“Mac OSX 10.8 Lion or newer”.
The version available at this website is usually the latest version, and the actual version may be
newer than the version in the picture.

STEP 3:
STEP 2:
Open Finder.
Click“JUST DOWNLOAD”.

STEP 4:
After the download is complete, an installation package
will appear in the download directory.
At this time, the Arduino development environment has
been successfully built!
Uplaod program for Ubuntu
STEP 1:
Go to https://www.arduino.cc/en/Main/Software and you will see the below page.
The version available at this website is usually the latest version, and the actual version
maybe newer than the version in the picture.

STEP 2:
Click“JUST DOWNLOAD”.

STEP 3:
Check that the download was successful.
STEP 4:
Press“CTRL + ALT + T”at the same time to open the command

STEP 5:
Enter“cd Downloads/”.

STEP 6:
Enter“tar xvjf arduino-1.8.12
-linux64.tar.xz”to unzip the
files.
STEP 7:
Enter“sudo mv arduini-1.8.12 /opt”to move the unzipped files to the“opt”folder.

STEP 8:
Enter“cd /opt/arduino-1.8.12/”to go to the arduino folder.
STEP 9:
Enter“sudo chmod +x install.sh”and“sudo chmod +x install.sh”to complete the installation.

You might also like